A model for a broad, disordered transition between the solar wind and the magnetosphere
Interaction of solar wind with magnetosphere and existence of electron distribution equilibrium in trapped plasma sheath
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interaction of solar wind with magnetosphere and existence of electron distribution equilibrium in trapped plasma sheath
Superconducting radio frequency cavities of bulk Niobium are integral components of particle accelerators based on superconducting technology. Wet chemical processing is the commonly used procedure for impurities and surface defects removal and surface roughness improvement , both required to improve the RF performance of the cavity. We are studying plasma etching as an alternate technique to process these cavities. The uniformity of the plasma sheath at the inner wall of the cavity is one prerequisite for its uniform etching. We are developing electro-optic diagnostic techniques to assess the plasma uniformity. Multiple electro-optical probes are placed at different locations of the single cell cavity to diagnose the electrical and optical properties of the plasma. The electrical parameters are required to understand the kinetic nature of the plasma and the optical emission spectroscopy provides the spatial distribution of radicals in the plasma. The spatial variation of the plasma parameters inside the cavity and their effect on the etching of niobium samples placed at different locations in the cavity will be presented.
A fluid model is utilized to describe the plasma-sheath boundary for a negatively biased planar probe immersed in electronegative plasmas. The model equations are solved on the scale of the electron Debye length and calculate the spatial distributions of electric potential, velocity, and density of positive ions in front of the probe. The position of sheath edge, the positive ion velocity at sheath edge (the Bohm velocity), and the positive ion flux collected by the probe are determined and compared with analytic (or scaling) formulas. Effects of control parameters on the Bohm velocity, the sheath thickness, and on the positive ion flux are investigated. A larger thermal motion of negative ions causes the Bohm velocity to increase, the sheath to increase, and the positive ion flux collected by the probe to increase. An increase in collision causes the Bohm velocity to decrease and the sheath to decrease resulting in a decrease in the positive ion flux. An increase in electronegativity causes both the Bohm velocity and the sheath thickness to decrease, resulting in an increase in the positive ion flux. As the value of the non-neutrality parameter q increases, the Bohm velocity and the sheath thickness are found to decrease, and the positive ion flux collected by the probe increases. The behavior of the positive ion flux entering the sheath is discussed as functions of control parameters. A careful comparison of theoretical positive ion flux with the experimental flux can allow us to obtain the electronegativity, the plasma ionization rate (q), and the collision parameter ({delta})
When a supersonic flow encounters an obstacles, shocks form to divert the flow around the obstacle. The region between the shock and the obstacle is the sheath, where the supersonic flow is compressed, heated, decelerated, and deflected. Supersonic flows, obstacles, and thus sheaths are observed on many scales throughout the Universe. We compare three examples seen in the heliosphere, illustrating the interaction of the solar wind with obstacles of three very different scales lengths. Magnetosheaths form behind planetary bow shocks on scales ranging from tens to 100 planetary radii. ICME sheath form behind shocks driven by solar disturbances on scale lengths of a few to tens of AU. The heliosheath forms behind the termination shock due to the obstacle presented by the interstellar medium on scale lengths of tens to a hundred AU. Despite this range in scales some common features have been observed. Magnetic holes, possibly due to mirror mode waves, have been observed in all three of these sheaths. Plasma depletion layers are observed in planetary and ICME sheaths. Other features observed in some sheaths are wave activity (ion cyclotron, plasma), energetic particles, transmission of Alfven waves/shocks, tangential discontinuities turbulence behind quasi-parallel shocks, standing slow mode waves, and reconnection on the obstacle boundary. We compare these sheath regions, discussing similarities and differences and how these may relate to the scale lengths of these regions.
The grain in the plasma gets charged until the net plasma flux to the grain surface vanishes. In the absence of any analytical formula, this ambipolar condition is utilized to compute the grain charge indirectly. The present work proposes an approximate analytical expression for the grain charge that is exact in the asymptotic limit and in which the relative error between analytical and numerically computed solutions is less than 3%. Using this formula, we show that, much like the plasma sheath, the Bohm criterion is satisfied near the dust surface.
Published arguments, which assign dominant roles to atomic metastability and molecular ion dissociation in the production of 'narrow' Zeeman component Balmer line radiation from the tokamak edge plasma, have been examined critically in relation to: l-redistribution by proton collisions, molecular ion-proton equipartition, and ion acceleration by the plasma sheath (scrape-off layer) potential. These processes are found to constrain the contributions from metastable atoms and from dissociative excitation of molecular ions to 'narrow' Balmer spectra emitted from the plasma edge, in relation to the corresponding contributions from electron impact-induced dissociative excitation of neutral molecules.
In complex plasma, the interaction mechanism among dust grains near the plasma sheath is significantly influenced by the downward ion flow towards the sheath and dust charge fluctuation over grain surface. Asymmetric ion flow towards the sheath gives rise to well known attractive wake potential in addition to repulsive Yukawa type of potential. The present work shows that the charging dynamics play a significant role in modification of plasma dielectric response function and hence the interaction mechanism among test dust particulates. The effective Debye length is found to be a characteristic of dust size and background plasma response towards the grain along with ion flow speed. The potentials thus obtained show a damping in strength of interaction in the presence of dynamical charging of dust as compared to that of constant charge dust grains. The result also shows decrease in focal length of ion lensing with increase in grain size.
Electron kinetics in atmospheric-pressure argon and nitrogen microwave (4 GHz) microdischarges is studied using a self-consistent one-dimensional Particle-in-Cell Monte Carlo Collisions model. The reversal of electric field (i.e., inverted sheath formation) is obtained in nitrogen and is not obtained in argon. This is explained by the different energy dependencies of electron-neutral collision cross sections in atomic and molecular gases and, as a consequence, different drag force acting on electrons. A non-local behavior of electron energy distribution function is obtained in both gases owing to electrons are generated in the plasma sheath. In both gases, electron energy relaxation length is comparable with the interelectrode gap, and therefore, they penetrate the plasma bulk with large energies.
The paper presents a theoretical model to study the growth of the carbon nanotube (CNT) on the catalyst substrate surface subjected to reactive plasma. The charging rate of the CNT, kinetics of electron, ions and neutral atoms, the growth rate of the CNT because of diffusion and accretion of ions on the catalyst nanoparticle inclusion of the issue of the plasma sheath is undertaken in the present model. Numerical calculations on the effect of ion density and temperature and the substrate bias on the growth of the CNT have been carried out for typical glow discharge plasma parameters. It is found that the height of CNT increases with the ion density of carbon ions and radius of CNT decreases with hydrogen ion density. The substrate bias also affects the growth rate of the CNT. The field emission characteristics from the CNTs can be analyzed from the results obtained.
Measured energy influx densities toward a tungsten dummy substrate in an argon rf-plasma are presented and a model for the description of the energy influx density based on plasma parameters, which have been obtained by Langmuir probe measurements, is applied. Furthermore, temperature measurements of microparticles are presented, which are confined in the plasma sheath. An extension of the model is developed for the description of the energy influx density to the particles. The comparison of model and experimental results offer the possibility to obtain an improved understanding of plasma-surface interactions.
A novel set of thermocouple sensors has been developed to measure heat fluxes arriving at divertor surfaces in the Alcator C-Mod tokamak, a magnetic confinement fusion experiment. These sensors operate in direct contact with the divertor plasma, which deposits heat fluxes in excess of {approx}10 MW/m{sup 2} over an {approx}1 s pulse. Thermoelectric EMF signals are produced across a non-standard bimetallic junction: a 50 {mu}m thick 74% tungsten-26% rhenium ribbon embedded in a 6.35 mm diameter molybdenum cylinder. The unique coaxial geometry of the sensor combined with its single-point electrical ground contact minimizes interference from the plasma/magnetic environment. Incident heat fluxes are inferred from surface temperature evolution via a 1D thermal heat transport model. For an incident heat flux of 10 MW/m{sup 2}, surface temperatures rise {approx}1000 deg. C/s, corresponding to a heat flux flowing along the local magnetic field of {approx}200 MW/m{sup 2}. Separate calorimeter sensors are used to independently confirm the derived heat fluxes by comparing total energies deposited during a plasma pulse. Langmuir probes in close proximity to the surface thermocouples are used to test plasma-sheath heat transmission theory and to identify potential sources of discrepancies among physical models.
The influence of Xe{sub 2}{sup +} dimer ions and excited Xe* atoms on the hollow cathode discharge driven by electron thermionic emission is studied using two-dimensional Particle-in-Cell Monte Carlo Collisions modeling. A comparison with the results of two-component (electrons and Xe{sup +} ions) plasma modeling showed that the presence of the Xe{sub 2}{sup +} dimer ions and excited Xe* atoms in the plasma affects the plasma parameters (density, potential, and ion fluxes toward the cathode). The influence of Xe{sub 2}{sup +} ions and Xe* atoms on the plasma sheath parameters, such as thickness and the ion velocity at the sheath edge, is analyzed.
Computer simulations of a plasma sheath formed near a nonconducting surface in a beamplasma discharge (BPD) at a low magnetic field in the reactor chamber are performed. The results of computer simulations are compared with experimental data. The optimal mode of GaAs etching in a BPD-based plasma processing reactor is chosen using results of computer simulations. Simulations for carbon (DLC) film sputtering modes in the framework of a similar model are also performed.
The double-probe has been used successfully in radio-frequency discharges. However, in low-frequency discharges, the double-probe I-V curve is so much seriously distorted by the strong plasma potential fluctuations that the I-V curve may lead to a large estimate error of plasma parameters. To suppress the distortion, we investigate the double-probe characteristics in low-frequency gas discharge based on an equivalent circuit model, taking both the plasma sheath and probe circuit into account. We discovered that there are two primary interferences to the I-V curve distortion: the voltage fluctuation between two probe tips caused by the filter difference voltage and the current peak at the negative edge of the plasma potential. Consequently, we propose a modified passive filter to reduce the two types of interference simultaneously. Experiments are conducted in a glow-discharge plasma (f = 30 kHz) to test the performance of the improved double probe. The results show that the electron density error is reduced from more than 100% to less than 10%. The proposed improved method is also suitable in cases where intensive potential fluctuations exist.
Capacitively coupled plasma glow discharges have been extensively used for materials processing in numerous industrial applications. Considerable research has been performed on plasma sheaths and standing waves over a capacitive applicator, which typically holds the processed substrate (e.g., a semiconductor wafer). In this work, we demonstrate for the first time the existence of normal modes in electric potential analogous to the vibrational modes in circular membranes and plates. These modes are exhibited through cross spectral analysis of the plasma potential measured with an emissive probe at 208 spatial positions and sampled at 1 GHz. These modes exist at several frequencies and are described by a series of Bessel functions. The data further suggests a nonlinear interaction between modes of different frequencies.
Kinetic theory model of plasma sheath transition, analyzing sheath structure in unignited mode of thermionic converter
Kinetic theory model of plasma sheath transition applied to sheath structure in unignited mode of thermionic converter
This paper describes the experimental realization of an optical trap for microparticles levitating in the plasma sheath. Single particles can be trapped in a laser beam comparable to optical tweezers known from colloidal suspensions. The trapping mechanism is discussed and two applications of the system are shown.