Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA JETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Polymer etching by atmospheric-pressure plasma jet and surface micro-discharge sources: Activation energy analysis and etching directionality

Treatments of polymer films using either a MHz atmospheric pressure plasma jet (APPJ) or an atmospheric pressure surface micro-discharge (SMD) plasma are investigated. While the typical approach to determine relevant reactive species is to correlate surface effects with gas phase species measurement, this does not capture potential synergistic or other complex effects that may be occurring. Activation energy and directionality of the etching process can characterize what is occurring at the surface for these processes in more detail. The APPJ source shows an apparent activation energy of ~0.18 eV at 8 mm distance and up to ~0.34 eV at 16mmdistance for a temperature range of 20–80 °C tested with thin polymer films. The APPJ source shows directional etching at 8 mm distance with less anisotropy the more distance is increased. The SMD source has an apparent activation energy of ~0.8–0.9 eV at a distance of 3 mm. The SMD also only shows isotropic etching behavior. However the SMD surface chemistry changes significantly to less oxidation with increased temperature while the APPJ source induced modifications remain very similar with temperature change. The lower apparent activation energy of the APPJ induced etching reactions as compared with low pressure work (0.5 eV) and observation of line-of-sight contribution to etching suggests the involvement of a directional species at closer distances facilitating the etching which falls off with increasing distance. The high activation energy of the SMD suggests that species with less capability for etching is responsible compared to the APPJ and low pressure plasma. In conclusion, the high surface oxidation from low temperature SMD treatments shows that the surface is being oxidized but not sufficiently to reach the desorption step of the etching process.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nitrogen metastable (N 2 (A 3 $Σ$ $^{u}_{+}$)) in a cold argon atmospheric pressure plasma jet: Shielding and gas composition

N 2 (A 3 $Σ$ $^{u}_{+}$) metastable species are detected and measured in a non-equilibrium atmospheric pressure plasma jet by laser induced fluorescence. A shielding device is used to change the ambient conditions additionally to the feeding gas composition. Varying the amount of N 2 and air admixed to the feeding gas as well as changing the shielding gas from N 2 to air reveals that the highest N 2 (A 3 $Σ$ $^{u}_{+}$) is achieved in the case of air admixtures in spite of the enhanced collisional quenching due to the presence of O 2 . Here, the reasons for these observations are discussed in detail.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic electron-positron plasma jets and interactions using LFEX lasers

Relativistic pair plasmas and jets are believed to exist in many astrophysical objects [Wardle 1998, Weidenspointner 2008] and are invoked to explain energetic phenomena related to Gamma Ray Bursts, Black Holes and the heating of intergalactic medium (IGM) [Mirabel & Rodriguez 1999, Meszaros 2002].

42 ENGINEERING↗

Plasma jet electrode has longer operating life

Water-cooled, silver-infiltrated tungsten electrode has twice the operating lifetime of the pure tungsten electrode used in plasma jet generators. This electrode reduces the erosion rate, ensures excellent heat transfer, and reduces thermal stresses.

Gracey, C. M.↗

Mega-Gauss Plasma Jet Creation Using a Ring of Laser Beams

Using 20 OMEGA laser beams at the Laboratory for Laser Energetics, University of Rochester, to irradiate a flat plastic target in a hollow ring configuration, we created supersonic cylindrical stable plasma jets with self-generated megagauss magnetic fields extending out to >4 mm. These well-collimated magnetized jets possess a number of distinct and novel properties that will allow us to study the dynamics, physical processes, and scaling properties of astrophysical jets with a dynamic range exceeding those of previous laboratory settings. The dimensionless parameters of these laboratory jets fall in the same regime as those of young stellar object jets. As a result, these jets will also provide new versatile laser-based platforms to study magnetized shocks, shear flows, and other plasma processes under controllable conditions.

79 ASTRONOMY AND ASTROPHYSICS↗

Mega-Gauss Plasma Jet Creation Using a Ring of Laser Beams

Using 20 OMEGA laser beams at the Laboratory for Laser Energetics, University of Rochester, to irradiate a flat plastic target in a hollow ring configuration, we created supersonic cylindrical stable plasma jets with self-generated megagauss magnetic fields extending out to >4 mm. These well-collimated magnetized jets possess a number of distinct and novel properties that will allow us to study the dynamics, physical processes, and scaling properties of astrophysical jets with a dynamic range exceeding those of previous laboratory settings. The dimensionless parameters of these laboratory jets fall in the same regime as those of young stellar object jets. These jets will also provide new versatile laser-based platforms to study magnetized shocks, shear flows, and other plasma processes under controllable conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Molecular beam mass spectrometry measurements of vibrationally excited N 2 in the effluent of an atmospheric plasma jet: a comparison with a state-to-state kinetic model

Vibrationally excited N 2 molecules are suggested to be one of the possible key species responsible for the observed synergistic effects in plasma catalysis for NH 3 synthesis. To assess the impact of vibrationally excited species in plasma-catalysis, quantitative measurements near interfaces are required, which remains challenging. In this letter, we report spatially resolved measurements of vibrationally excited N 2 in the effluent of an atmospheric pressure plasma jet by molecular beam mass spectrometry (MBMS). The mass spectrometry signals as a function of electron energy of the ionizer were fitted with the effective electron-impact ionization cross section of N 2 (v) considering the vibrational distribution function as determined by a detailed vibrational level resolved plasma kinetic calculation. Here, the reported method presented in this letter shows the capability of MBMS to measure vibrationally excited species of N 2 near interfaces when the vibrational distribution function is known or assumed and shows excellent agreement with state-to-state kinetic models of N 2 (v).

42 ENGINEERING↗

Atmospheric Cold Plasma Jet Coating and Surface Treatment for Improved Adhesive Bonding Performance of Dissimilar Material Joints Subject to Harsh Environmental Exposure

The program goal was the development and demonstration of a novel material coating system using an innovative atmospheric cold microwave plasma jet to enable surface functionalization for corrosion protection, wear resistance and improved bonding strength. The technical approach was directed towards proof-of-concept demonstration of advanced point-of-manufacturing material bonding to improve adhesive joint performance subject to harsh environmental exposure. The assembled team, consisting of the researchers at the University of Illinois, end-users at General Motors and small business manufacturer Starfire Industries, successfully demonstrated a single, cost-effective, high-volume production process that meets the requirements of multi-material combinations relevant to the energy-intensive transportation industry (e.g. Al-steel, Mg-steel, Al-Mg and Al-CFRP joints for body-in-white structures) while eliminating offline pretreatment for Al and Mg alloy substrates that are energy intensive, have chemical waste disposal issues, and add cost. Technical demonstration of dissimilar material joining while maintaining bonding strength and cohesion after long-duration environmental exposure was accomplished for all materials of interest. This novel approach has broad applicability for manufacturing in automotive, aerospace, marine, railcar, and specialty consumer goods, etc.

36 MATERIALS SCIENCE↗

Observations of a plectonemic configuration in a stable magnetized plasma jet

Astrophysical jets are collimated high-speed outflows emerging from spinning and accreting matter around celestial objects and may spontaneously result from self-organized processes. Magnetic self-organization is commonly observed in laboratory plasma physics experiments; however, they require close-fitting flux conservers to constrain and stabilize the toroidal or cylindrical structures. Here we report the first observations of a long, stable, free-boundary plasma jet far from chamber walls, embedding a double-helix magnetic structure resembling a force-free plectonemic Taylor state. The jets arise from an experimental setup that mimics an accretion disk and has no close-fitting solid flux conserver. The results support the hypothesis that self-organization could be a universal, intrinsic explanation for jet formation, collimation, and stability and may help explain double-helix features in celestial observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma jet based in situ reduction of copper oxide in direct write printing

Printing of nanostructured films with tailored oxidation state and electronic structure can have far reaching applications in several areas including printable electronics, optoelectronics, solar cells, catalytic conversion, and others. Widely used inkjet/aerosol/screen printing techniques require pre- and postprocessing for enhanced adhesion and tailoring of the chemical state of the thin film. Herein, we demonstrate atmospheric pressure plasma jet printing with unique capability to print and tune in situ the electronic properties and surface morphology of nanomaterials. Plasma printing of copper thin films with tailored oxidation state from an inexpensive copper oxide precursor is demonstrated and characterized using x-ray absorption spectroscopy, Raman spectroscopy, and electrical measurements.

42 ENGINEERING↗

Spatially resolved density measurements of singlet delta oxygen in a non-equilibrium atmospheric pressure plasma jet by molecular beam mass spectrometry

Singlet delta oxygen (O 2 (a 1 Δ g )), the first electronically excited state of O 2 , plays an important role in many applications. We report the first measurements of absolute densities of O 2 (a 1 Δ g ) in an atmospheric pressure plasma jet (APPJ) by molecular beam mass spectrometry (MBMS). The ability to measure axial and radial profiles of O 2 (a 1 Δ g ) impinging on a substrate in the effluent of the APPJ is a key advantage of the MBMS diagnostic method over previously reported optical methods. Here, the measured large O 2 (a 1 Δ g ) densities in the APPJ effluent, up to one order of magnitude higher than the O density, underline the potential importance of O 2 (a 1 Δ g ) in many applications using APPJs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Destruction of {alpha}-synuclein based amyloid fibrils by a low temperature plasma jet

Amyloid fibrils are ordered beta-sheet aggregates that are associated with a number of neurodegenerative diseases such as Alzheimer and Parkinson. At present, there is no cure for these progressive and debilitating diseases. Here we report initial studies that indicate that low temperature atmospheric pressure plasma can break amyloid fibrils into smaller units in vitro. The plasma was generated by the 'plasma pencil', a device capable of emitting a long, low temperature plasma plume/jet. This avenue of research may facilitate the development of a plasma-based medical treatment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theoretical Modeling of Reactor Relevant Conditions for Plasma Jet Driven Magneto-Inertial Fusion

The Charger Advanced Power and Propulsion Laboratory (CAPP), a laboratory within the Propulsion Research Center (PRC) at the University of Alabama in Huntsville (UAH) is working with Los Alamos National Laboratory (LANL). to develop models and inform on promising paths for high gain magneto-inertial fusion (MIF) conditions. This report provides a framework for identifying promising conditions for achieving ignition in plasma-jet-driven magneto-inertial fusion (PJMIF)[1]. As proposed, for the first part of the contract, UAH proposes to develop a gain over unity set of stagnation conditions to provide a state of plasma conditions to achieve to set long terms goals for the PJMIF program. Specifically, UAH will model PJMIF stagnation conditions to include radiation, heat transfer, two temperature energy equations, fusion reactivity and nonlocal fusion product deposition, but no hydrodynamics for these purposes. These calculations will use a stationary plasma model to reduce simulation complexity—focusing on a DT target at 10 keV. Subsequent work will include a DD plasma layer acting as an afterburner. UAH will assume an initial magnetic field without any consideration of the topology, just assume a field strength, most likely scaled with consideration of the local hall parameter. This effort will inform the team on the tradeoff between mass, peak target field, etc and the achievable gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In Situ Infrared Spectroscopy of a Plasma Jet and Data-Driven Solution of Multi-Scale Plasma Chemistry Problems

Multi-scale problems are commonly known in many scientific and engineering fields where microscopic behaviors are coupled with macroscopic processes. This is also an unsolved problem in low-temperature plasma chemistry where hundreds of chemical species are involved in thousands of chemical reactions. To address this problem, a physics-informed data-driven modeling is developed to solve such a multi-scale problem using the experimental Fourier-transform infrared spectroscopy (FTIR) measurements of several species’ concentrations. The modeling based on modern machine learning techniques provides concentrations of other relevant species along with the electron temperature and gas temperature at the location of FTIR measurements. For example, the concentrations O, OH, and H 2 O 2 play key roles in plasma-based cancer therapy. This approach overcomes the multi-scale difficulties of microscopic low-temperature plasma chemistry coupling with macroscopic gas flow and allows the acquisition of a full picture of output species concentrations. Presented here for the helium-air jet at atmospheric pressure, the ML-based modeling can be used to describe and possibly control multiscale systems using partial experimental data sets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Basic data of ions in He-air mixtures for fluid modeling of low temperature plasma jets

The basic ion data such as interaction potential parameters, elastic and inelastic collision cross sections, transport coefficients (reduced mobility and diffusion coefficients) and reaction coefficients have been analysed and determined for the case of He{sup +}, N{sub 2}{sup +}, and O{sub 2}{sup +} in He-dry air mixtures. The ion transport and reaction coefficients have been determined from an optimized Monte Carlo simulation using calculated elastic and experimentally fitted inelastic collision cross sections. The elastic momentum transfer cross sections have been calculated from a semi-classical JWKB (Jeffreys Wentzel Kramers Brillouin) approximation based on a (6-4) rigid core interaction potential model. The inelastic cross sections have been fitted using the measured reaction coefficients, such as, for instance, the non resonant charge transfer coefficients. The cross section sets involving elastic and inelastic processes were then validated using either the measured reduced mobility whenever available in the literature or the zero-field mobility calculated from Satoh's relation, and potential parameters available in the literature. From the sets of elastic and inelastic collision cross sections thus obtained for the first time for He{sup +}/N{sub 2}, He{sup +}/O{sub 2}, N{sub 2}{sup +}/He, and O{sub 2}{sup +}/He systems, the ion transport and reaction coefficients were calculated in the pure gases over a wide range of the density reduced electric field E/N. Then, from the present cross section and other literature sets, the ion mobility and the longitudinal and transverse diffusion coefficients were calculated for different concentrations of air in He in the case of He{sup +}, N{sub 2}{sup +}, O{sub 2}{sup +}, and also O{sup -} ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axial plasma jet characterization on a microsecond x-pinch

The jets produced on a microsecond x-pinch (quarter period T 1/4 ~ 1 μs, dI/dt ~ 0.35 kA/ns) have been studied through light-field schlieren imaging and optical framing photographs across 4 different materials: Al, Ti, Mo, and W. The axial velocity of the jets was measured and exhibited no dependence on atomic number (Z) of the wire material. Additionally, there may be a dependence on another factor(s), namely, the current rise rate. The average axial jet velocity across all four materials was measured to be 2.9 ± 0.5 × 10 6 cm/s. The average jet diameter and the average radial jet expansion rate displayed inverse relationships with Z, which may be attributed to radiative cooling and inertia. Asymmetry between the anode and cathode jet behavior was observed and is thought to be caused by electron beam activity. The mean divergence angle of the jet was found to vary with wire material and correlated inversely with the thermal conductivity of the cold wire. Optical images indicated a two-layer structure in Al jets which may be caused by standing shocks and resemble phenomena observed in astrophysical jet formation and collimation. Finally, kinks in the jets have also been observed which may be caused by m = 1 MHD instability modes or by the interaction of the jet with the electrode plasma.

36 MATERIALS SCIENCE↗

Non-invasive probe diagnostic method for electron temperature and ion current density in atmospheric pressure plasma jet source

The electrical probe diagnostics are very hard to be applied to atmospheric plasmas due to severe perturbation by the electrical probes. To overcome this, the probe for measuring electron temperature and ion current density is indirectly contacted with an atmospheric jet source. The plasma parameters are obtained by using floating harmonic analysis. The probe is mounted on the quartz tube that surrounds plasma. When a sinusoidal voltage is applied to a probe contacting on a quartz tube, the electrons near the sheath at dielectric tube are collected and the probe current has harmonic components due to probe sheath nonlinearity. From the relation of the harmonic currents and amplitude of the sheath voltage, the electron temperature near the wall can be obtained with collisional sheath model. The electron temperatures and ion current densities measured at the discharge region are in the ranges of 2.7–3.4 eV and 1.7–5.2 mA/cm{sup 2} at various flow rates and input powers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗