Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PINCH DEVICES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Magnetic Field Measurements in Wire-Array Z-Pinches using Magneto-Optically Active Waveguides

Understanding the magnetic field topology in wire-array Z-pinches as a function of time is of great significance to understanding these high-energy density plasmas especially for their ultimate application to stockpile stewardship and inertial confinement fusion. We are developing techniques to measure magnetic fields as a function of space and time using Faraday rotation of a single longitudinal mode (SLM) laser through a magneto-optically active bulk waveguide (multicomponent terbium borate glass) placed adjacent to, or within, the wire array in 1 MA experiments. We have measured fields >10 T with 100 ns rise times outside of a wire-array for the entire duration of the current pulse and as much as {approx}2 T inside a wire-array for {approx}40 ns from the start of current. This is the first time that such rapidly varying and large fields have been measured using these materials. In a dense Z-pinch, these sensing devices may not survive for long but may provide the magnetic field at the position of the sensor that can be used to corroborate magnetic probes, with which we compare our results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurements of temporally- and spatially-resolved neutron production in a sheared-flow stabilized Z-pinch

A novel approach using multiple scintillator detectors is applied to measure temporally- and spatially-resolved neutron production in the Fusion Z-pinch Experiment (FuZE) device, a Sheared-Flow Stabilized (SFS) Z-pinch. Diagnosing neutron production from FuZE is important for determining if fusion is thermonuclear and whether the FuZE device can be scaled toward reactor conditions. Absolute yields of up to 2 × 10 5 neutrons per discharge are measured with calibrated plastic scintillator detectors operating in pulse-counting mode. Neutron emission durations of up to ~8 μs are inferred by recording the time difference between the first and last pulses for each discharge. Multiple scintillator detectors located at different positions with respect to the fusing plasma are used to demonstrate that the axial extent of the neutron producing region is comparable to the device volume. Scintillator detectors are well-suited as neutron diagnostics for FuZE and other plasma devices with similar yields and emission durations. Increasing the neutron yield, duration, and volume of the neutron emitting region within the plasma column are significant experimental objectives for FuZE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-based EUV light source

Various mechanisms are provided relating to plasma-based light source that may be used for lithography as well as other applications. For example, a device is disclosed for producing extreme ultraviolet (EUV) light based on a sheared plasma flow. The device can produce a plasma pinch that can last several orders of magnitude longer than what is typically sustained in a Z-pinch, thus enabling the device to provide more power output than what has been hitherto predicted in theory or attained in practice. Such power output may be used in a lithography system for manufacturing integrated circuits, enabling the use of EUV wavelengths on the order of about 13.5 nm. Lastly, the process of manufacturing such a plasma pinch is discussed, where the process includes providing a sheared flow of plasma in order to stabilize it for long periods of time.

Shumlak, Uri↗

Memristive behavior in a junctionless flash memory cell

We report charge storage based memristive operation of a junctionless thin film flash memory cell when it is operated as a two terminal device by grounding the gate. Unlike memristors based on nanoionics, the presented device mode, which we refer to as the flashristor mode, potentially allows greater control over the memristive properties, allowing rational design. The mode is demonstrated using a depletion type n-channel ZnO transistor grown by atomic layer deposition (ALD), with HfO{sub 2} as the tunnel dielectric, Al{sub 2}O{sub 3} as the control dielectric, and non-stoichiometric silicon nitride as the charge storage layer. The device exhibits the pinched hysteresis of a memristor and in the unoptimized device, R{sub off}/R{sub on} ratios of about 3 are presented with low operating voltages below 5 V. A simplified model predicts R{sub off}/R{sub on} ratios can be improved significantly by adjusting the native threshold voltage of the devices. The repeatability of the resistive switching is excellent and devices exhibit 10{sup 6 }s retention time, which can, in principle, be improved by engineering the gate stack and storage layer properties. The flashristor mode can find use in analog information processing applications, such as neuromorphic computing, where well-behaving and highly repeatable memristive properties are desirable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Neoclassical Transport in the Helical Reversed-Field Pinch

Test particle evaluation of the diffusion coefficient in a fusion plasma in the reversed-field pinch (RFP) configuration shows distinct similarities with stellarators when the plasma spontaneously evolves towards a helical shape. The almost total absence of superbanana particles at the levels of helical deformation seen in experiment (B{sub h}/B=10%) causes transport to be proportional to collision frequency (at low collisions). This fact excludes the possibility that the minimum conceivable transport could be inversely proportional to collision frequency, which is typical of unoptimized stellarators. This result strengthens the perspectives of the helical RFP as a fusion configuration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microtearing Modes in Reversed Field Pinch Plasmas

In the reversed field pinch RFX-mod strong electron temperature gradients develop when the single-helical-axis regime is achieved. Gyrokinetic calculations show that in the region of the strong temperature gradients microtearing instabilities are the dominant turbulent mechanism acting on the ion Larmor radius scale. The quasilinear evaluation of the electron thermal conductivity is in good agreement with the experimental estimates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Topological Constraints on Magnetic Relaxation

The final state of turbulent magnetic relaxation in a reversed field pinch is well explained by Taylor's hypothesis. However, recent resistive-magnetohydrodynamic simulations of the relaxation of braided solar coronal loops have led to relaxed fields far from the Taylor state, despite the conservation of helicity. We point out the existence of an additional topological invariant in any flux tube with a nonzero field: the topological degree of the field line mapping. We conjecture that this constrains the relaxation, explaining why only one of three example simulations reaches the Taylor state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radiating Shock Properties in the Z-pinch Dynamic Hohlraum

The Z-pinch dynamic hohlraum is a high-power x-ray source used for a variety of high energy-density physics applications including high temperature opacity measurements and inertial confinement fusion (ICF). The system consists of a tungsten wire-array Z pinch that implodes onto a low-density CH{sub 2} foam launching a radiating shock that heats the hohlraum to radiation temperatures >200 eV. The temperature and density evolution of this shock have been inferred through the measurement of time- and space-resolved line emission from Si atoms locally doped in the CH{sub 2} foam. The observed emission spectra are analyzed through comparison to collisional-radiative calculations that include a detailed treatment of line-shapes and the effect of non-local radiation on the atomic level populations. As a complement to the detailed spectral data, the radial and azimuthal distribution of the axially directed shock emission is recorded with time-gated x-ray pinhole images that provide information on the spatial profile of the shock conditions. Together with broadband x-ray power measurements, these data provide a comprehensive suite of information to determine the shock dynamics and associated energetics of the Z-pinch dynamic hohlraum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of Anisotropic Thermal Conductivity in Magnetohydrodynamics Simulations of a Reversed-Field Pinch

A compressible magnetohydrodynamics simulation of the reversed-field pinch is performed including anisotropic thermal conductivity. When the thermal conductivity is much larger in the direction parallel to the magnetic field than in the perpendicular direction, magnetic field lines become isothermal. As a consequence, as long as magnetic surfaces exist, a temperature distribution is observed displaying a hotter confined region, while an almost uniform temperature is produced when the magnetic field lines become chaotic. To include this effect in the numerical simulation, we use a multiple-time-scale analysis, which allows us to reproduce the effect of a large parallel thermal conductivity. The resulting temperature distribution is related to the existence of closed magnetic surfaces, as observed in experiments. The magnetic field is also affected by the presence of an anisotropic thermal conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlation of electrostatic fluctuation and reversal of toroidal field in the reversed-field pinch plasma

The magnetic fluctuations and electrostatic probe potential have been measured in the Toroidal Pinch Experiment - RX (TPE-RX) reversed-field pinch plasma [Y. Yagi et al., Fusion Eng. Des. 45, 421 (1999)] (at the plasma surface r/a = 1.00). Fast electrons with energy comparable to or slightly higher than the core electron temperature are observed as many spikes in the electrostatic probe signal. These electrons are diffused by a fluctuating magnetic field from the core region. During the period of mild deepening of the reversal of the edge toroidal field, a significant reduction in the spike signal, increases in electron density and soft x-ray radiation, and a decrease in the D{alpha} line radiation are observed, even though the reduction in magnetic fluctuations is not significant during the same period, which indicates that the mild deepening of the reversal of the toroidal field can improve the confinement of fast electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Mass-Dependent Ion Heating during Magnetic Reconnection in a Laboratory Plasma

Noncollisional ion heating in laboratory and astrophysical plasmas and the mechanism of conversion of magnetic energy to ion thermal energy are not well understood. In the Madison Symmetric Torus reversed-field pinch experiment, ions are heated rapidly during impulsive reconnection, attaining temperatures exceeding hundreds of eV, often well in excess of the electron temperature. The energy budget of the ion heating and its mass scaling in hydrogen, deuterium, and helium plasmas were determined by measuring the fraction of the released magnetic energy converted to ion thermal energy. The fraction ranges from about 10%-30% and increases approximately as the square root of the ion mass. A simple model based on stochastic ion heating is proposed that is consistent with the experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Evidence for a Reduction in Electron Thermal Diffusion due to Trapped Particles

New high time resolution measurements of the electron thermal diffusion {chi}{sub e} throughout the sawtooth cycle of the Madison Symmetric Torus reversed-field pinch have been made by utilizing the enhanced capabilities of the upgraded multipoint, multipulse Thomson scattering system. These measurements are compared to the {chi}{sub e} due to magnetic diffusion predicted by using information from a new high spectral resolution zero-{beta} nonlinear resistive magnetohydrodynamic simulation performed, for the first time, at the Lundquist number of high current Madison Symmetric Torus plasmas (S{approx_equal}4x10{sup 6}). Agreement between the measured and predicted values is found only if the reduction in thermal diffusion due to trapped particles is taken into account.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Vanishing Magnetic Shear And Electron Transport Barriers In The RFX-Mod Reversed Field Pinch

We define the safety factor q for the helical plasmas of the experiment RFX-mod by accounting for the actual three-dimensional nature of the magnetic flux surfaces. Such a profile is not monotonic but goes through a maximum located in the vicinity of the electron transport barriers measured by a high resolution Thomson scattering diagnostic. Helical states with a single axis obtained in visco resistive magnetohydrodynamic numerical simulations exhibit similar nonmonotonic q profiles provided that the final states are preceded by a magnetic island phase, like in the experiment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Whole device modeling of the fuze sheared-flow-stabilized Z pinch

Abstract The FuZE sheared-flow-stabilized Z pinch at Zap Energy is simulated using whole-device modeling employing an axisymmetric resistive magnetohydrodynamic formulation implemented within the discontinuous Galerkin WARPXM framework. Simulations show formation of Z pinches with densities of approximately 10 22 m −3 and total DD fusion neutron rate of 10 7 per µ s for approximately 2 µ s. Simulation-derived synthetic diagnostics show peak currents and voltages within 10% and total yield within approximately 30% of experiment for similar plasma mass. The simulations provide insight into the plasma dynamics in the experiment and enable a predictive capability for exploring design changes on devices built at Zap Energy.

Physics↗

Time-to-Pinch Investigation of 5 kJ Mather-Type Plasma Focus Device

The Egyptian Atomic Energy Authority-Plasma focus (EAEA-PF2) has been upgraded to a 5 kJ plasma focus device. Its characteristics have been investigated at various pressures and different voltages in a 5 kJ Mather-type plasma focus device for Ar gas. Its time-to-pinch has been measured, simulated and analyzed at different operating conditions. It is observed from the results that, the time-to-pinch decreased when either the charging voltage increased or the gas pressure decreased. In addition, the time-to-pinch is estimated theoretically using Lee model RADPF5.15. A comparison between the experimental and theoretical time-to-pinch is discussed. Also, the drive factor of plasma focus is analyzed at different pressures and charging voltages. It is noticed that, the mass and current factors are affected by changing the pressure and voltage. Finally, it is observed that, the drive factor is proportional inversely to the pressure and directly to the charging voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-pinch. Part I

Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The concept of the X-pinch arose in the course of innovative experiments on studying the generation of hot dense plasma in nanosecond Z-pinches. The main idea was to localize the region occupied by the plasma and stabilize the moment of its formation. This was achieved by using a load in the form of crossed wires. The resulting plasma object turned out to be so interesting that a new scientific direction appeared in plasma physics. At present, studies in this direction are being performed in many laboratories worldwide. The term X-pinch became conventional, and sections devoted to its study are always present at plasma conferences. X-pinch is not only a very interesting scientific object, but also a unique source of X-ray emission with extreme parameters. The use of X-pinches for point-projection X-ray radiography of high-energy-density objects provided many new experimental results. In some cases, the concepts of the processes occurring in matter upon fast energy deposition changed dramatically. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-pinch. Part II

Results of experimental studies of the X-pinch since its invention and implementation in 1982 at the Lebedev Physical Institute are presented. The review consists of two parts. The first part briefly outlines the history of creation and studies of X-pinches, describes the diagnostic techniques and devices developed during these studies, and presents the main results obtained in studying the physical processes occurring in the X-pinch. The second part is devoted to the results of detailed studies of the spatial, temporal, and spectral characteristics of the X-pinch hot spot—the region where the highest plasma parameters are achieved and which is a source of X-ray emission with extreme parameters. Some results of X-pinch simulations are also presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗