Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PELLETING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

The effect of pellet injection on turbulent transport in TJ-II

An improvement in confinement associated with the injection of pellets has been observed in TJ-II and other devices. By means of a simple model, we study here the modification of turbulent transport by the injection of pellets in TJ-II and how this modification affects the particle confinement time. The analysis of the results shows the relationship of the confinement improvement with the evolution of the shear flow due to turbulence, especially near low order rational surfaces. This work is based on pellet injections into the neutral beam injection heated phase of TJ-II plasmas. For this, single, double, or triple hydrogen pellet injection are considered and the post-injection evolution of selected plasma parameters are analyzed and compared.

Physics↗

Impact of ammonia fiber expansion (AFEX) pretreatment on energy consumption during drying, grinding, and pelletization of corn stover

Pretreatment and densification of biomass can increase the viability of bioenergy production by providing a feedstock that is readily hydrolyzed and able to be transported greater distances. Ammonia Fiber Expansion (AFEX) is one such method targeted for use at distributed depots to create a value-added and densified feedstock for bioenergy use. However, the pretreatment process results in a high-moisture material that must be dried, further size reduced, and pelletized; all of which are energy intensive processes. This work quantifies the energy consumption required to dry, grind, and densify AFEX pretreated corn stover compared to non-pretreated stover and explores the potential of reduced drying as a means to conserve energy. The purpose of this work is to understand whether material property changes resulting from AFEX pretreatment influence the material performance in downstream formatting operations. Material properties, heat balance equations, and a rotary drum dryer model were used to model a commercial scale rotary drum dryer for AFEX pretreated corn stover, showing the potential to reduce dryer energy consumption by up to 36% compared to non-pretreated corn stover. Laboratory measured grinding and pelleting energies were both very sensitive to material moisture content. Overall, the total energy required for drying, grinding, and pelleting amounts to a savings of up to 20 kWh/dry ton for the AFEX pretreated material when dried to a low moisture content, equating to up to 0.55 /kg savings for gas and electricity. Grinding and pelleting of high moisture AFEX pretreated stover was shown to be more costly than the savings collected through reduced drying. Furthermore, while the energy and cost savings shown here are modest, the results help to highlight operational challenges and opportunities for continued improvement.

09 BIOMASS FUELS↗

Observation and analysis of pellet material del B drift on MAST

Pellet material deposited in a tokamak plasma experiences a drift towards the low field side of the torus induced by the magnetic field gradient. Plasma fuelling in ITER relies on the beneficial effect of this drift to increase the pellet deposition depth and fuelling efficiency. It is therefore important to analyse this phenomenon in present machines to improve the understanding of the del B induced drift and the accuracy of the predictions for ITER. This paper presents a detailed analysis of pellet material drift in MAST pellet injection experiments based on the unique diagnostic capabilities available on this machine and compares the observations with predictions of state-of-the-art ablation and deposition codes.

Garzotti, L↗

Influence of the low order rational q surfaces on the pellet deposition profile

Pellet injection is planned to be the main fuelling method on ITER. The high temperature of the plasma during a fusion burn will limit the penetration of the pellet to the outer third of the minor radius. This limited penetration is expected to be compensated by a polarization drift, which will deposit the particles deeper in the plasma for the pellets injected from the high field side. In order to evaluate the expected depth of the fuelling on ITER, a good understanding of this drift effect is important. Experimental data acquired on the DIII-D (USA) and Tore Supra (France) tokamaks show that the polarization drift is influenced by the low order rational q surfaces. These surfaces appear to attenuate the polarization mechanism as the drifting particles cross them. In this paper, a correlation between the maximum of the pellet mass deposition profile and the positions of the q = 2 and q = 3 surfaces on DIII-D and Tore Supra is shown for high field side and low field side injection. A model is proposed to explain this effect and compared with the experimental results. To conclude, the possible consequences of this phenomenon on the fuelling in ITER are described.

Commaux, Nicolas JC↗

Investigation of the compatibility of pellet fueling with ELM-free H-mode plasmas in EAST tokamak

Abstract Experiments on pellet fueling have been carried out in edge localized mode (ELM)-free high-confinement mode (H-mode) plasmas with q 95 ∼ 6 in the EAST tokamak. Cryogenic deuterium pellets were injected into the ELM-free plasmas at a frequency of 10 or 5 Hz from ∼45 cm above the mid-plane on the low-field side. It is found that the ELM-free H-mode plasmas are still sustained even if both the edge and core plasma are impacted by the pellet injections (PIs). Several small ELMs would appear and the edge coherent mode accompanying the ELM-free phase fades or even disappears just after the pellet events, but the plasma would rapidly recover to the ELM-free state. Although the ELMing phase is very short, it may be an issue that still needs to be resolved in the future. Meanwhile, the 3/2 tearing mode often appearing in ELM-free discharges would be stabilized by the PIs, and the high-Z impurity concentration would be reduced during the PIs. All these results will be meaningful to International Thermonuclear Experimental Reactor and future fusion reactors.

Physics↗

Controlled neoclassical tearing mode (NTM) healing by fueling pellets and its impact on electron cyclotron current drive requirements for complete NTM stabilization

Controlled partial stabilization of core m/n – 2/1 Neoclassical Tearing Modes (NTMs) by fueling deuterium pellets is reported in DIII-D and KSTAR H-mode plasmas (m=n are the poloidal/toroidal mode numbers). Analyses of DIII-D data exploring possible physics origins show that an explanation is offered by NTM-turbulence multi-scale interaction, triggered by a sudden increase of local gradients near q–2 caused by the pellet. Pellet injection from the high-field side allows deep fueling which reaches the island region. In turn, low-k turbulent density fluctuations (ñ) increase by 30% in the island region. This ñ can drive transport across the island separatrices, reducing the pressure at spot at the O-point and diminishing the NTM drive. The Mirnov probe array detects the reduction of the 2/1 magnetic amplitude by up to 20%. Causality between elevated gradients outside of the island, turbulence spreading into the island and reduced NTM drive is qualitatively supported by non-linear gyrokinetic turbulence simulations. These demonstrate increased penetration of ion-scale ñ from the background plasma to the O-point region when the background gradient is increased. This interaction has potentially far reaching consequences as it can can lead to a reduction of the required electron cyclotron current density (j ECCD ) for NTM suppression by 70%, as predicted by the modified Rutherford equation. Furthermore, this beneicial effect of fueling pellets can be important as j ECCD is the anticipated active NTM control technique for the International Thermonuclear Experimental Reactor (ITER), but its efficiency will be lowered by third harmonic absorption in Pre-Fusion Power Operation-1 (PFPO-1) at half magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Pellet sublimation and expansion under runaway electron flux

This work provides a qualitative description of the pellet response to the ambient runaway electrons. For ITER-relevant parameters, our estimates suggest that the cryogenic pellets will be sublimated instantly at the edge of the runaway beam. The subsequent rapid expansion of the sublimated material spreads the impurities over the poloidal cross-section of a tokamak on a millisecond time scale prior to the complete ionization of the expanding cloud. Here, the injected solid pellet turns into a rapidly expanding gas cloud before it reaches the core of the runaway beam. As a result, the pellet acts similar to the massive gas injection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Demonstration of Tokamak Discharge Shutdown with Shell Pellet Payload Impurity Dispersal

The first rapid tokamak discharge shutdown using dispersive core payload deposition with shell pellets has been achieved in the DIII-D tokamak. Shell pellets are being investigated as a possible new path toward achieving tokamak disruption mitigation with both low conducted wall heat loads and slow current quench. Conventional disruption mitigation injects radiating impurities into the outer edge of the tokamak plasma, which tends to result in poor impurity assimilation and creates a strong edge cooling and outward heat flow, thus requiring undesirable high-$Z$ impurities to achieve low conducted heat loads. The shell pellet technique aims to produce a hollow temperature profile by using a thin, low-ablation shell surrounding a dispersive payload, giving a greatly increased impurity ablation (and radiation) rate when the payload is released in the plasma core. This principle was demonstrated successfully using 3.6 mm outer diameter, 40 μ m thickness diamond shells holding boron powder. The pellets caused rapid (<10 ms) discharge shutdown with low conducted divertor heat fluence (~0.1 MJ/m 2 ). Confirmation of massive release of the boron powder payload into the plasma core was obtained spectroscopically. Some evidence for the formation of a hollow temperature profile during the shutdown was observed. Furthermore, these first results open a new avenue for disruption mitigation research, hopefully enabling development of highly effective methods of avoiding disruption wall damage in future reactor-scale tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Report on Evolutionary Enhancements to UO 2 Pellets

Sintered uranium oxide fuel pellets are the primary fuel used in civilian nuclear reactors. Due to extensive experience and established infrastructure, these ceramic fuels are likely to remain important for nuclear energy well into the future. Fuel pellets are produced mainly through cold-pressing ceramic powder and high temperature sintering. The processing technique presented here is designed to fit into the current fuel pellet production infrastructure with minimal changes to fuel manufacturers and reactor operators. This study makes changes in the UO 2 powder before the pellets are pressed, possibly requiring only minor changes in the manufacturing process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Uranium Silicide/Nitride Pellet Fabrication Demonstration: Report on Powder Characteristics (Final CRADA Report)

This report details experimental procedures and results of work at the Idaho National Lab to fabricate U 3 Si 2 and UN ceramic powders from their basic elements. The reaction procedure centers on arc melting using a cold, copper hearth. The reacted "buttons" are then ground into powder, and the powder is characterized. The preliminary experiments utilized feeding pieces of metallic U and Si (in the proper ratio) into the arc-melting furnace for melting into "buttons." This melting was repeated several times with the intent of homogenizing the reaction to produce phase pure U 3 Si 2 powder. However, sintering of the pressed-powder at over 1400C showed partial melting and slumping of the pellets. Characterization of the powder using x-ray diffraction (XRD) indicated the crystalline portion of the powder was U 3 Si 2 . However, further investigations indicated a significant portion (12.4%) of the powder was amorphous Si that was transformed into crystalline Si after a period of annealing. Therefore, a greatly improved method of powder fabrication was developed using mixing fine powders of U and Si together, pressing into a pellet, followed by arc melting and grinding into U 3 Si 2 powder. This method was highly successful in producing high phase purity (>98.5% U 3 Si 2 ) powder. One feature of this method is that the fine U powder is made by a hydride/de-hydride cycle. The equipment available at INL only allows for fabrication of relatively small batches, and the method (using INL equipment) is somewhat labor intensive. The powder was used to successfully press and sinter U 3 Si 2 pellets ("Final Report on Pellet Fabrication," INL/LTD-13-29465). A limited attempt was made to fabricate high purity UN powder using the fine U powder made at INL (hydride/de-hydride method) and heating it under flowing nitrogen gas. X-ray diffraction was used to characterize the resulting powder, and a Rietveld refinement was performed on the data. The refinement showed a result of 70.0% UN and 30.0% U 2 N 3 . It is thought that the UN content can be easily increased

Source record↗

Development of an Innovative High-Thermal Conductivity UO2 Ceramic Composites Fuel Pellets with Carbon Nano-Tubes Using Spark Plasma Sintering

Uranium dioxide (UO2) is the most common fuel material in commercial nuclear power reactors. Despite its numerous advantages such as high melting point, good high-temperature stability, good chemical compatibility with cladding and coolant, and resistance to radiation, it suffers from low thermal conductivity that can result in large temperature gradients within the UO2 fuel pellet, causing it to crack and release fission gases. Thermal swelling of the pellets also limits the lifetime of UO2 fuel in the reactor. To mitigate these problems, we propose to develop novel UO2 fuel with uniformly distributed carbon nanotubes (CNTs) that can provide high-conductivity thermal pathways and can eliminate fuel cracking and fission gas release due to high temperatures. CNTs have been investigated extensively for the past decade to explore their unique physical properties and many potential applications. CNTs have high thermal conductivity (6600 W/mK for an individual single- walled CNT and >3000 W/mK for an individual multi-walled CNT) and high temperature stability up to 2800°C in vacuum and about 750°C in air. These properties make them attractive candidates in preparing nano-composites with new functional properties. The objective of the proposed research is to develop high thermal conductivity of UO2–CNT composites without affecting the neutronic property of UO2 significantly. The concept of this goal is to utilize a rapid sintering method (5–15 min) called spark plasma sintering (SPS) in which a mixture of CNTs and UO2 powder are used to make composites with different volume fractions of CNTs. Incorporation of these nanoscale materials plays a fundamentally critical role in controlling the performance and stability of UO2 fuel. We will use a novel in situ growth process to grow CNTs on UO2 particles for rapid sintering and develop UO2-CNT composites. This method is expected to provide a uniform distribution of CNTs at various volume fractions so that a high thermally conductive UO2-CNT composite is obtained with a minimal volume fraction of CNTs. The mixtures are sintered in the SPS facility at a range of temperatures, pressures, and time durations so as to identify the optimal processing conditions to obtain the desired microstructure of sintered UO2-CNT pellets. The second objective of the proposed work is to identify the optimal volume fraction of CNTs in the microstructure of the composites that provides the desired high thermal conductivity yet retaining the mechanical strength required for efficient function as a reactor fuel. We will systematically study the resulting microstructure (grain size, porosity, distribution of CNTs, etc.) obtained at various SPS processing conditions using optical microscopy, scanning electron microscopy (SEM), and transmission electron microscope (TEM). We will conduct indentation hardness measurements and uniaxial strength measurements as a function of volume fraction of CNTs to determine the mechanical strength and compare them to the properties of UO2. The fracture surfaces will be studied to determine the fracture characteristics that may relate to the observed cracking during service. Finally, we will perform thermal conductivity measurements on all the composites up to 1000° C. This study will relate the microstructure, mechanical properties, and thermal properties at various volume fractions of CNTs. The overall intent is to identify optimal processing conditions that will provide a well-consolidated compact with optimal microstructure and thermo-mechanical properties. The deliverables include: (1) fully characterized UO2-CNT composite with optimal CNT volume fraction and high thermal conductivity and (2) processing conditions for production of UO2-CNT composite pellets using SPS method.

Subhash, Ghatu↗

Special Analysis for the Disposal of the Idaho National Laboratory Unirradiated Light Water Breeder Reactor Rods and Pellets Waste Stream at the Area 5 Radioactive Waste Management Site, Nevada National Security Site, Nye County, Nevada

The purpose of this special analysis (SA) is to determine if the Idaho National Laboratory (INL) Unirradiated Light Water Breeder Reactor (LWBR) Rods and Pellets waste stream (INEL103597TR2, Revision 2) is suitable for disposal by shallow land burial (SLB) at the Area 5 Radioactive Waste Management Site (RWMS). The INL Unirradiated LWBR Rods and Pellets waste stream consists of 24 containers with unirradiated fabricated rods and pellets composed of uranium oxide (UO2) and thorium oxide (ThO2) fuel in zirconium cladding. The INL Unirradiated LWBR Rods and Pellets waste stream requires an SA because the 229 Th, 230 Th, 232 U, 233 U, and 234 U activity concentrations exceed the Nevada National Security Site (NNSS) Waste Acceptance Criteria (WAC) Action Levels.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Summary of Pellet Technology Program Activities

This report summarizes the activities and budget information of ORNL’s pellet technology program from the start of FY2014 through FY2017. Cost summaries are broken down by year and spending category. Milestone activities are outlined and described by year and further described in the project narrative. The project narrative outlines the main pellet injection technology advances enabled by the pellet technology program. A list of published research products is included, along with biographies of personnel involved. This document was prepared in support of the April 24, 2018, review of the pellet technology program at ORNL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First-principles Studies of Tritium Reactivity and Diffusivity on Defective and Carbon Doped Surfaces of $\gamma$-LiAlO 2 Pellets (Tritium Science Program Report FY 2019 )

In tritium-producing burnable absorber rods (TPBARs), tritium ($^{3}_{1}$H,T) is produced in 6 Li isotope enriched γ-LiAlO 2 ceramic pellet. However, a better understanding of $^{3}_{1}$H transport through the pellets, getters and the barrier/cladding system is hampered by a lack of fundamental data about the $^{3}_{1}$H solubility and diffusivity. In the process of $^{3}_{1}$H diffusion from bulk γ-LiAlO 2 to its surface, it is possible that $^{3}_{1}$H atoms bind with surface atoms or become trapped at vacancies sites. By increasing the number of $^{3}_{1}$H diffused from bulk to surface, upon recombination and desorption from surface sites, they will escape from the γ-LiAlO 2 surface to form different $^{3}_{1}$H species (possibly being as T, T 2 , T 2 O, OT, or CT x (x=1-4, with C impurity present at a 100-600 ppm level in pellets) that need to be identified and can become captured by the getter. Therefore, exploring the $^{3}_{1}$H diffusion from bulk to surface, corroborated with surface adsorption, diffusion and recombination and followed by desorption from surface as various types of $^{3}_{1}$H species becomes a very important task as an integral part of the study of $^{3}_{1}$H solubility and diffusivity in the pellets.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Fuel Cycle Cost Basis Report: Module D1-4 and Module D1-5 Ceramic Pelletized Sodium-Cooled Fast Reactor (SFR) Fuel Fabrication Ceramic Vibrocompacted Fuel Fabrication

This is a cost module that is part of the Advanced Fuel Cycle -- Cost Basis Report. Module D1-4: Nature of this module update (Rev 1) from previous advanced fuel cycle cost basis reports (AFCCBRs): new life cycle cost data on U,Pu SFR mixed oxide (MOX) fuels is derived from the Nonproliferation Assessment Systems Analysis Program (NASAP) conducted in the late 1970s. Highassay low-enriched uranium (HALEU) ceramic fuel is also discussed in more detail compared to earlier AFC-CBRs, since some advanced SFR concepts currently under development will require this HALEU fuel type for startup. Module D1-5: Nature of this FY-21 module update from previous AFC-CBRs: this module includes a few new references and a somewhat expanded discussion of vibrocompaction fuel fabrication technology. The WIT values for VIPAC are pegged directly to those for conventional LWR and SFR pelletized U,Pu MOX (note that this module now includes VIPAC MOX fuel for LWRs in addition to SFRs). Based on information from Russia, where VIPAC has been studied extensively, the unit costs are expressed as a percentage of those in the new updated Module D1-2 (pelletized U,Pu MOX) and new updated Module D1-4 (pelletized U,Pu MOX) for large NOAK fabrication facilities of the same production capacity. Since both ceramic pelletized MOX Modules D1-2 and D1-4 benefitted from analysis of 1970s NASAP data, by extension this Module D1-5 also benefits.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Shock and vibration tests of uranium mononitride fuel pellets for a space power nuclear reactor

Shock and vibration tests were conducted on cylindrically shaped, depleted, uranium mononitride (UN) fuel pellets. The structural capabilities of the pellets were determined under exposure to shock and vibration loading which a nuclear reactor may encounter during launching into space. Various combinations of diametral and axial clearances between the pellets and their enclosing structures were tested. The results of these tests indicate that for present fabrication of UN pellets, a diametral clearance of 0.254 millimeter and an axial clearance of 0.025 millimeter are tolerable when subjected to launch-induced loads.

Adams, D. W.↗

Pneumatic Pellet-Transporting System

Pneumatic system transports food pellets to confined animals. Flow of air into venturi assembly entrains round pellets, drawing them from reservoir into venturi for transport by airflow. Pneumatic pellet-transporting system includes venturi assembly, which creates flow of air that draws pellets into system.

Wood, George↗

Internal impacted screw-locking pellet

An elongate fastener having an engaging surface engageable with an engaging surface of a fastener's mate includes a hole extending through a portion of the fastener and having a top opening and a bottom floor, a locking pellet disposed near the bottom floor, a discharge channel communicating between the pellet and through the engaging surface of the fastener and opening out toward the engaging surface of the fastener's mate, and an impact pin in the hole having a top portion protruding through the top opening and a bottom portion near the locking pellet, whereby the pin drives the locking pellet through the discharge channel against the engaging surfaces of the fastener and the fastener's mate whereby to lock the fastener against the fastener's mate.

MacMartin, Malcolm J.↗