Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Operating experience data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Performance of the Lidar Design and Data Algorithms for the GLAS Global Cloud and Aerosol Measurements

The Geoscience Laser Altimeter System (GLAS) launched in early 2003 is the first polar orbiting satellite lidar. The instrument design includes high performance observations of the distribution and optical scattering cross sections of atmospheric clouds and aerosol. The backscatter lidar operates at two wavelengths, 532 and 1064 nm. For the atmospheric cloud and aerosol measurements, the 532 nm channel was designed for ultra high efficiency with solid state photon counting detectors and etalon filtering. Data processing algorithms were developed to calibrate and normalize the signals and produce global scale data products of the height distribution of cloud and aerosol layers and their optical depths and particulate scattering cross sections up to the limit of optical attenuation. The paper will concentrate on the effectiveness and limitations of the lidar channel design and data product algorithms. Both atmospheric receiver channels meet and exceed their design goals. Geiger Mode Avalanche Photodiode modules are used for the 532 nm signal. The operational experience is that some signal artifacts and non-linearity require correction in data processing. As with all photon counting detectors, a pulse-pile-up calibration is an important aspect of the measurement. Additional signal corrections were found to be necessary relating to correction of a saturation signal-run-on effect and also for daytime data, a small range dependent variation in the responsivity. It was possible to correct for these signal errors in data processing and achieve the requirement to accurately profile aerosol and cloud cross section down to 10-7 llm-sr. The analysis procedure employs a precise calibration against molecular scattering in the mid-stratosphere. The 1064 nm channel detection employs a high-speed analog APD for surface and atmospheric measurements where the detection sensitivity is limited by detector noise and is over an order of magnitude less than at 532 nm. A unique feature of the GLAS is a full acquisition of the surface return pulse, which has important application to the atmospheric transmission retrieval.

Spinhirne, James D.↗
NASA NTRS2004

X-37 Flight Demonstrator: X-40A Flight Test Approach

The flight test objectives are: Evaluate calculated air data system (CADS) experiment. Evaluate Honeywell SIGI (GPS/INS) under flight conditions. Flight operation control center (FOCC) site integration and flight test operations. Flight test and tune GN&C algorithms. Conduct PID maneuvers to improve the X-37 aero database. Develop computer air date system (CADS) flight data to support X-37 system design.

Mitchell, Dan↗
NASA NTRS2013

Kinect Engineering with Learning (KEWL)

According to a Nielsen survey at the time of this reporting, 41% of all households have a game console. This is one market in which NASA has been absent from education and outreach efforts. Kinect Engineering with Learning (KEWL) is made to enter into that market and bring NASA education and outreach to a very familiar venue. KEWL creates an education and outreach experience that is more participatory, both in a school and museum environment. KEWL is a set of applications that runs on an Xbox 360 using the Kinect controller used for education and outreach. These applications currently include: Train R2, a visual simulation of Robonaut 2 that allows students to control a virtual R2 in a game environment; Drive R2, an interface using the Xbox 360 and Kinect controller that allows students to control the real R2 using the methods they learned playing Train R2; ISS experience, a visual tour of the interior of the International Space Station where students use their body to fly through the virtual ISS; Gravity Ball, a simulation of throwing balls in the gravity of different planets; Solar Array repair, a simulation of the simplified STS-121 solar array repair mission; and PlaySpace, a Mars/Moon application that allows students to experience different aspects of Mars/Moon. Users can "fly through" the ISS using their body, allowing an experience similar to what an astronaut would have on orbit. In PlaySpace, users can fly over the surface of Mars and view surface data obtained by Mars rovers. Users of Train R2 and Drive R2 can experience what it is like to control a robot over a distance with a time delay, simulating the time delay that would occur between ground control and an on-orbit robot. The initial ISS experiences were built using parts of code from the NASA Enigma software. The models used in these experiences were also from the Integrated Graphics Operations and Analysis Lab model database. The PlaySpace experience incorporates surface data obtained from NASA rovers and satellites and was built by NASA JPL.

Goza, Sharon↗
NASA NTRS1993

Specialized data analysis for the Space Shuttle Main Engine and diagnostic evaluation of advanced propulsion system components

The Marshall Space Flight Center is responsible for the development and management of advanced launch vehicle propulsion systems, including the Space Shuttle Main Engine (SSME), which is presently operational, and the Space Transportation Main Engine (STME) under development. The SSME's provide high performance within stringent constraints on size, weight, and reliability. Based on operational experience, continuous design improvement is in progress to enhance system durability and reliability. Specialized data analysis and interpretation is required in support of SSME and advanced propulsion system diagnostic evaluations. Comprehensive evaluation of the dynamic measurements obtained from test and flight operations is necessary to provide timely assessment of the vibrational characteristics indicating the operational status of turbomachinery and other critical engine components. Efficient performance of this effort is critical due to the significant impact of dynamic evaluation results on ground test and launch schedules, and requires direct familiarity with SSME and derivative systems, test data acquisition, and diagnostic software. Detailed analysis and evaluation of dynamic measurements obtained during SSME and advanced system ground test and flight operations was performed including analytical/statistical assessment of component dynamic behavior, and the development and implementation of analytical/statistical models to efficiently define nominal component dynamic characteristics, detect anomalous behavior, and assess machinery operational condition. In addition, the SSME and J-2 data will be applied to develop vibroacoustic environments for advanced propulsion system components, as required. This study will provide timely assessment of engine component operational status, identify probable causes of malfunction, and indicate feasible engineering solutions. This contract will be performed through accomplishment of negotiated task orders.

Source record↗
NASA NTRS1998

NASA Lewis' Telescience Support Center Supports Orbiting Microgravity Experiments

The Telescience Support Center (TSC) at the NASA Lewis Research Center was developed to enable Lewis-based science teams and principal investigators to monitor and control experimental and operational payloads onboard the International Space Station. The TSC is a remote operations hub that can interface with other remote facilities, such as universities and industrial laboratories. As a pathfinder for International Space Station telescience operations, the TSC has incrementally developed an operational capability by supporting space shuttle missions. The TSC has evolved into an environment where experimenters and scientists can control and monitor the health and status of their experiments in near real time. Remote operations (or telescience) allow local scientists and their experiment teams to minimize their travel and maintain a local complement of expertise for hardware and software troubleshooting and data analysis. The TSC was designed, developed, and is operated by Lewis' Engineering and Technical Services Directorate and its support contractors, Analex Corporation and White's Information System, Inc. It is managed by Lewis' Microgravity Science Division. The TSC provides operational support in conjunction with the NASA Marshall Space Flight Center and NASA Johnson Space Center. It enables its customers to command, receive, and view telemetry; monitor the science video from their on-orbit experiments; and communicate over mission-support voice loops. Data can be received and routed to experimenter-supplied ground support equipment and/or to the TSC data system for display. Video teleconferencing capability and other video sources, such as NASA TV, are also available. The TSC has a full complement of standard services to aid experimenters in telemetry operations.

Hawersaat, Bob W.↗
NASA NTRS2017

Dawn Spacecraft Performance at Ceres: Results of Hybrid Control for Ceres Mapping

Dawn is a low-thrust interplanetary spacecraft currently orbiting the dwarf planet Ceres, to better understand the early creation of the solar system. Launched in September 2007, Dawn arrived at Vesta in July 2011. After a 16-month successful science campaign at Vesta, Dawn departed for Ceres, arriving in early 2015. The Dawn spacecraft uses both reaction wheel assemblies (RWA) and a reaction control system (RCS) to provide 3-axis attitude control for the spacecraft. Reaction wheels were designed to be the primary system for attitude control, however two wheels have shown high friction anomalies and have been removed from service. The project has implemented a hybrid control algorithm using two reaction wheels and RCS thrusters. This hybrid control capability enabled Dawn to achieve very high science return, while significantly conserving remaining hydrazine propellant. With only two remaining healthy RWA’s, hybrid control became part of the baseline plan for Ceres science operations. The Dawn team developed specific operational approaches in which sequences were developed with careful consideration of science versus resource trades. Commanding and sequence planning also incorporated contingency planning, in the event that another reaction wheel may fail. Despite the differences in operational approach between Vesta and Ceres, both campaigns achieved very rich scientific data return. This paper highlights Dawn’s recent flight experience with hybrid attitude control during Ceres orbit operations. The discussion includes the approaches utilized by the Dawn team to address unique operational challenges presented by the hybrid approach, and reviews spacecraft performance under hybrid control in low orbit at Ceres. Additionally, methods used to optimize hydrazine use and thereby extend the science campaign will be presented. Finally, a preliminary assessment of an orbit transfer with two reaction wheels, during extended mission operations, is discussed.

Smith, Brett A.↗
NASA NTRS2000

Experimental Results from the Thermal Energy Storage-2 (TES-2) Flight Experiment

Thermal Energy Storage-2 (TES-2) is a flight experiment that flew on the Space Shuttle Endeavour (STS-72), in January 1996. TES-2 originally flew with TES-1 as part of the OAST-2 Hitchhiker payload on the Space Shuttle Columbia (STS-62) in early 1994. The two experiments, TES-1 and TES-2 were identical except for the fluoride salts to be characterized. TES-1 provided data on lithium fluoride (LiF), TES-2 provided data on a fluoride eutectic (LiF/CaF2). Each experiment was a complex autonomous payload in a Get-Away-Special payload canister. TES-1 operated flawlessly for 22 hr. Results were reported in a paper entitled, Effect of Microgravity on Materials Undergoing Melting and Freezing-The TES Experiment, by David Namkoong et al. A software failure in TES-2 caused its shutdown after 4 sec of operation. TES-1 and 2 were the first experiments in a four experiment suite designed to provide data for understanding the long duration microgravity behavior of thermal energy storage salts that undergo repeated melting and freezing. Such data have never been obtained before and have direct application for the development of space-based solar dynamic (SD) power systems. These power systems will store energy in a thermal energy salt such as lithium fluoride or a eutectic of lithium fluoride/calcium difluoride. The stored energy is extracted during the shade portion of the orbit. This enables the solar dynamic power system to provide constant electrical power over the entire orbit. Analytical computer codes were developed for predicting performance of a space-based solar dynamic power system. Experimental verification of the analytical predictions were needed prior to using the analytical results for future space power design applications. The four TES flight experiments were to be used to obtain the needed experimental data. This paper will address the flight results from the first and second experiments, TES-1 and 2, in comparison to the predicted results from the Thermal Energy Storage Simulation (TESSIM) analytical computer code. An analysis of the TES-2 data was conducted by Cleveland State University Professor, Mounir Ibrahim. TESSIM validation was based on two types of results; temperature history of various points on the containment vessel and TES material distribution within the vessel upon return from flight. The TESSIM prediction showed close comparison with the flight data. Distribution of the TES material within the vessel was obtained by a tomography imaging process. The frozen TES material was concentrated toward the colder end of the canister. The TESSIM prediction indicated a similar pattern. With agreement between TESSIM and the flight data, a computerized representation was produced to show the movement and behavior of the void during the entire melting and freezing cycles.

Tolbert, Carol↗
NASA NTRS1985

A cometary and interplanetary dust experiment on the Vega spacecraft missions to Halley's Comet

The dust counter and mass analyzer on board both the Vega 1 and Vega 2 spacecraft scheduled to encounter Halley's Comet are discussed. The operational modes, data formats, telemetry modes and data acquisition, and scientific measurements planned for this experiment both at encounter and during interplanetary travel are described. The initial postlaunch calibration and experiment status are summarized in an appendix.

Perkins, M. A.↗
NASA NTRS2013

Assimilation of Quality Controlled AIRS Temperature Profiles using the NCEP GFS

We have previously conducted a number of data assimilation experiments using AIRS Version-5 quality controlled temperature profiles as a step toward finding an optimum balance of spatial coverage and sounding accuracy with regard to improving forecast skill. The data assimilation and forecast system we used was the Goddard Earth Observing System Model , Version-5 (GEOS-5) Data Assimilation System (DAS), which represents a combination of the NASA GEOS-5 forecast model with the National Centers for Environmental Prediction (NCEP) operational Grid Point Statistical Interpolation (GSI) global analysis scheme. All analyses and forecasts were run at a 0.5deg x 0.625deg spatial resolution. Data assimilation experiments were conducted in four different seasons, each in a different year. Three different sets of data assimilation experiments were run during each time period: Control; AIRS T(p); and AIRS Radiance. In the "Control" analysis, all the data used operationally by NCEP was assimilated, but no AIRS data was assimilated. Radiances from the Aqua AMSU-A instrument were also assimilated operationally by NCEP and are included in the "Control". The AIRS Radiance assimilation adds AIRS observed radiance observations for a select set of channels to the data set being assimilated, as done operationally by NCEP. In the AIRS T(p) assimilation, all information used in the Control was assimilated as well as Quality Controlled AIRS Version-5 temperature profiles, i.e., AIRS T(p) information was substituted for AIRS radiance information. The AIRS Version-5 temperature profiles were presented to the GSI analysis as rawinsonde profiles, assimilated down to a case-by-case appropriate pressure level p(sub best) determined using the Quality Control procedure. Version-5 also determines case-by-case, level-by-level error estimates of the temperature profiles, which were used as the uncertainty of each temperature measurement. These experiments using GEOS-5 have shown that forecasts resulting from analyses using the AIRS T(p) assimilation system were superior to those from the Radiance assimilation system, both with regard to global 7 day forecast skill and also the ability to predict storm tracks and intensity.

Susskind, Joel↗
NASA NTRSDate not supplied

Performance Risk Model Validation with Operationally Relevant Tasks

Human Research Program aims to develop methods to support astronauts’ health and productivity during spaceflight. The Crew Health and Performance Probabilistic Risk Assessment (CHP-PRA) team uses powerful computational methods to predict mission risk in both domains: medical and performance. Here, we show how CHP-PRA uses the Performance Risk Model (PRisM) to quantify the performance risk and show an application of the model on operationally relevant tasks. There are various metrics adopted across performance researchers that PRisM can accommodate. For data analysis, interpretation, and integration, we use a method of unifying data from multiple sources by converting each to a single metric. We consult subject matter experts prior to integrating the converted data into PRisM. The method we use is inspired by the Cooper-Harper rating scale [1]. Using this unified metric, we can easily combine data from various tests and lab groups. We explain our conversion method in detail and show how it pertains to the process of testing and validation of PRisM on operational tasks. We conducted an initial validation in collaboration with the Behavioral Health and Performance (BHP) lab. We test PRisM using data on their operationally relevant task ROBoT-r, a track-and-capture task for grappling incoming resupply vehicles [2]. Several other labs at NASA Johnson Space Center worked together to design 7 Functional Task Tests (FTTs) in pursuit of simulating the tasks required after landing on a planetary surface and after return to Earth [3]. Here we use the results from both ROBoT-r and the 7 FTTs and compare their experiment data to PRisM’s computational output to demonstrate how PRisM can support operations by predicting crew performance on future missions.

performance modeling↗
NASA NTRS1969

Why data system standards?

Data systems coordinating standards developed from experience with STADAN, discussing operating environment and administrative decisions influence on implementation

Coates, R. J.↗
NASA NTRS1972

Atmospheric and surface properties of Mars obtained by infrared spectroscopy on Mariner 9

During the eleven month operational lifetime of Mariner 9, the infrared spectroscopy experiment obtained data over a large portion of Mars. Recently obtained spectra indicate that strong seasonal variations in the water vapor distribution over both polar regions occurred. The wettest atmospheric conditions observed so far contain 20 to 30 precipitable microns of water over the north polar cap during northern spring. A low resolution pressure map is presented which covers that portion of the planet between latitudes -60 deg and +25 deg. A more detailed study of the Coprates canyon indicates that at its lowest point the canyon floor must be at least 5 km below the rim. Applications of tidal theory to temperature fields derived from the spectra indicate diurnal surface pressure fluctuations of as much as 12 percent during the great dust storm of 1971-72. Qualitative arguments based on radiative transfer calculations for model dust clouds composed of spherical quartz particles suggest that particle radii during the storm were of the order of a few microns.

Conrath, B.↗
NASA NTRS1973

Atmospheric and surface properties of Mars obtained by infrared spectroscopy on Mariner 9.

During the almost 1-year operational lifetime of Mariner 9 the infrared spectroscopy experiment obtained data over a large portion of Mars. Between June and October 1972, improvements were made in the CO2 transmittances, which are necessary for the interpretation of the thermal emission spectra. Recently obtained spectra indicate that strong seasonal variations in the water vapor distribution occurred over both polar regions. The wettest atmospheric conditions observed so far contain 20 to 30 precipitable microns of water over the north polar cap during northern spring. A low-resolution pressure map is presented that covers that portion of the planet between latitudes -60 and +25 deg. A more detailed study of the Coprates canyon indicates that, at its lowest point, the canyon floor must be at least 5 km below the rim. Applications of tidal theory to temperature fields derived from the spectra indicate diurnal surface pressure fluctuations of as much as 12% during the Great Dust Storm of 1971-1972.

Conrath, B.↗
NASA NTRS1975

A biological and physical oceanographic remote sensing study aboard the Calypso

The paper discusses an oceanographic remote sensing program conducted aboard the R/V Calypso in the Gulf of Mexico and the Caribbean Sea to provide information for correlating ocean measurements with remotely sensed observations. Remote sensors on satellites and aircraft are used as operations and experiment planning tools as well as for scientific data acquisition. Emphasis is on providing surface-truth measurements for OCS flights and on investigating the area of the Gulf affected by the outflow of the Mississippi River. The discussion covers the shipboard instrumentation, ocean color scanner data acquisition and results, NOAA/VHRR data analysis approach, and Landsat and APT/ATS as planning tools. The research effort has demonstrated the feasibility of using satellite data as a supportive method to aid an oceanographic research vessel on a near real-time basis.

Harlan, J. C.↗
NASA NTRS1977

GSFC short pulse radar, JONSWAP-75

In September 1975, the Goddard Space Flight Center operated a short pulse radar during ocean wave measuring experiments off the coast of West Germany in the North Sea. The experiment was part of JONSWAP-75. The radar system and operations during the experiment are described along with examples of data.

Levine, D. M.↗
NASA NTRS1981

Mapping of submerged vegetation using remote sensing technology

Techniques for mapping submerged sea grasses using aircraft supported remote sensors are described. The 21 channel solid state array spectroradiometer was successfully used as a remote sensor in the experiment in that the system operated without problem and obtained data. The environmental conditions of clear water, bright sandy bottom and monospecific vegetation (Thalassia) were ideal.

Savastano, K. J.↗
NASA NTRS1987

The critical role of personality and organizational factors as determinants of reactions to restricted and stressful environments

Research into the impact of personality factors on groups in various settings is reviewed as an introduction to a brief discussion of personality and group behavior research needs relevant to the space program. Significant findings of some earlier research are summarized, and methodological problems are touched on. The study of intergroup and intragroup conflict in a stressful environment, as exemplified particularly by undersea habitats, is seen as being of consequence for long-term space missions. It is concluded that adequate research can only be conducted as an adjunct to data collection from operational stressful environments, and not from laboratory experiments.

Helmreich, Robert L.↗