Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nonlinear responses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Automated Model Updating Effect on the Linear and Nonlinear Dynamic Responses of Historical Masonry Structures

Finite element models supply the simulation of the problems to obtain the structural behaviors under different loading conditions. The updating processes based on changing the uncertain parameters such as material properties, boundary conditions, meshing size etc. are made to create actual finite element models in order to represent the real conditions of the problems. This procedure can be made using two methods, namely manual model updating and global/local automatic model updating. The global/local automatic model updating procedures are very popular owing to the applicability to all kind of engineering structures, minimizing the differences nearly to zero, availability of damage localization and structural health monitoring. In this paper a historical masonry armory building selected as an application and its finite element analyses, experimental measurements and automated model updating processes are carried out. The finite element model of the structures was developed with ANSYS software and first three natural frequencies are attained. The experimental dynamic characteristics such as natural frequencies, damping ratios and mode shapes are obtained using ambient vibration method. The differences between experimental and numerical frequencies are minimized up to the range of 0–1%, by using local updating procedure. The linear and nonlinear seismic analyses of the building are conducted on initial and updated models. At the end of the analyses, maximum displacements, principal stresses and strains are given with detail. In addition, crack distributions diagrams are attained to validate the stresses accumulation points. It can be seen that there is an increasing trend in the displacement, stress and strain values after finite element model updating both linear and nonlinear analysis. In addition, linear and nonlinear analysis results are compared with each other to evaluate the nonlinear analysis effect. It is concluded that the displacement and strain values are increased after nonlinear analysis. But, there is not any agreement in stress values.

42 ENGINEERING↗

Modeling the nonlinear hysteretic response in DAE experiments of Berea sandstone: A case-study

Dynamic acousto-elasticity (DAE) allows probing the instantaneous state of a material while the latter slowly and periodically is changed by an external, dynamic source. In DAE investigations of geo-materials, hysteresis of the material's modulus defect displays intriguing features which have not yet been interpreted in terms of any specific mechanism occurring at atomic or mesoscale. Here, experimental results on dry Berea sandstone, which is the rock type best investigated by means of a DAE technique, are analyzed in terms of three rheological models providing simplified representations of mechanisms involving dislocations interacting with point defects which are distributed along the dislocations' core or glide planes, and microcracks with finite stiffness in compression. Constitutive relations linking macroscopic strain and stress are derived. From the latter, the modulus defect associated to each mechanism is recovered. These models are employed to construct a composite one which is capable of reproducing several of the main features observed in the experimental data. The limitations of the present approach and, possibly, of the current implementation of DAE are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-field nonlinear optical response and phase control in a dielectric laser accelerator

Abstract Advances in ultrafast laser technology and nanofabrication have enabled a new class of particle accelerator based upon miniaturized laser-driven photonic structures. However, developing a useful accelerator based on this approach requires control of the particle dynamics at field intensities approaching the damage limit. We measure acceleration in a fused silica dielectric laser accelerator driven by fields of up to 9 GV m −1 and observe a record 1.8 GV m −1 in the accelerating mode. At these intensities the dielectric is driven beyond its linear response and self-phase modulation changes the phase velocity of the accelerating mode, reducing the average gradient to 850 MeV m −1 . We show that free-space optics can be used to compensate this dephasing and demonstrate that tailoring the laser phase and amplitude can facilitate optimization of the beam dynamics. This could enable MeV scale energy gain in a single stage and pave the way towards applications in scientific, industrial, and medical fields.

Cesar, D. (ORCID:0000000336691854)↗

QM/MM investigation of the concentration effects on the second-order nonlinear optical responses of solutions

A multiscale approach combining quantum mechanics (QM) and molecular mechanics methods has been employed to investigate the effects of solute-solute interactions and therefore of concentration on the first hyperpolarizability of solutions of nitrobenzene in benzene. First, spatial distributions of solute and solvent molecules are generated using Monte Carlo simulations where the intermolecular interactions are described using the Lennard-Jones potentials and Coulomb terms. Then, a reduced number of statistically-uncorrelated configurations are sampled and submitted to time-dependent Hartree-Fock calculations of the first hyperpolarizability. When only one molecule is described quantum-mechanically and is embedded in the electrostatic polarization field of the solution described by point charges, β{sub HRS} and β{sub //} as well as the depolarization ratio increase in parallel with the concentration in nitrobenzene. This effect is attributed to the increase of the polarization field associated with the presence of polar nitrobenzene molecules in the surrounding. Then, the first solvation shell is considered explicitly in the QM calculation to address solute-solute interactions effects. When the number of nitrobenzenes in the first solvation shell increases, β{sub HRS} and β{sub //} normalized to the number of nitrobenzene molecules decrease and this decrease attains roughly 50% when there are 3 nitrobenzene molecules in the first solvation shell. These drastic reductions of the first hyperpolarizability result from (partial) centro-symmetric arrangements between the nitrobenzene molecules, as supported by the relationship between β and the angle between the nitrobenzene charge transfer axes. Moreover, these β decreases originate mostly from the reduction of the dipolar β component, whereas the octupolar one is rather constant as a function of the nitrobenzene concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A strategy to identify materials exhibiting a large nonlinear phononics response: tuning the ultrafast structural response of LaAlO 3 with pressure

We use theory and first-principles calculations to investigate how structural changes induced by ultrafast optical excitation of infrared-active phonons change with hydrostatic pressure in LaAlO 3 . Our calculations show that the observed structural changes are sensitive to pressure, with the largest changes occurring at pressures near the boundary between the cubic perovskite and rhombohedral phases. We rationalize our findings by defining a figure of merit that depends only on intrinsic materials quantities, and show that the peak response near the phase boundary is dictated by different microscopic materials properties depending on the particular phonon mode being excited. Our work demonstrates how it is possible to systematically identify materials that may exhibit particularly large changes in structure and properties due to optical excitation of infrared-active phonons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear inductive response of pinned superconducting vortices in artificial pinning sites

Using the time dependent Ginzburg-Landau equations, we simulate the inductive responses of a variety of thin-film systems containing patterned antidots with different sizes and shapes. The results for all shapes show that the kinetic inductance diverges as the applied current approaches a critical current that is below the BCS depairing current. In conclusion, exploiting the similarity of the observed current-voltage behavior to that of Josephson junctions, we obtain an empirical equation that well fits the inductivity curve as a function of the applied current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic examination of rf-cavity-quality niobium films through local nonlinear microwave response

The performance of superconducting radio-frequency (SRF) cavities is sometimes limited by local defects. To investigate the rf properties of these local defects, especially those that nucleate rf magnetic vortices, a near-field magnetic microwave microscope is employed. Local third-harmonic response ( P 3 f ) and its temperature dependence and rf power dependence are measured for one Nb / Cu film grown by direct current magnetron sputtering (DCMS) and six Nb / Cu films grown by high-power impulse magnetron sputtering (HiPIMS) with systematic variation of deposition conditions. Five out of the six HiPIMS Nb / Cu films show a strong third-harmonic response that is likely coming from rf vortex nucleation due to a low- T c surface defect with a transition temperature between 6.3 and 6.8 K, suggesting that this defect is a generic feature of air-exposed HiPIMS Nb / Cu films. A phenomenological model of surface-defect grain boundaries hosting a low- T c impurity phase is introduced and studied with time-dependent Ginzburg-Landau (TDGL) simulations of probe-sample interaction to better understand the measured third-harmonic response. The simulation results show that the third-harmonic response of rf vortex nucleation caused by surface defects exhibits the same general features as the data, including peaks in third-harmonic response with temperature, and their shift and broadening with higher microwave amplitude. We find that the parameters of the phenomenological model (the density of surface defects that nucleate rf vortices and the depth an rf vortex travels through these surface defects) vary systematically with film deposition conditions. From the point of view of these two properties, the Nb / Cu film that is most effective at reducing the nucleation of rf vortices associated with surface defects can be identified. Published by the American Physical Society 2024

Wang, Chung-Yang (ORCID:0000000184299633)↗