Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Next”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Design of the Next Generation Nuclear Plant Graphite Creep Experiments for Irradiation in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Program will be irradiating six gas reactor graphite creep experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the new United States Department of Energy’s lead laboratory for nuclear energy development. The ATR is one of the world’s premiere test reactors for performing long term, high flux, and/or large volume irradiation test programs. These graphite irradiations are being accomplished to support development of the next generation reactors in the United States. The graphite experiments will be irradiated over the next six to eight years to support development of a graphite irradiation performance data base on the new nuclear grade graphites now available for use in high temperature gas reactors. The goals of the irradiation experiments are to obtain irradiation performance data at different temperatures and loading conditions to support design of the Next Generation Nuclear Plant Very High Temperature Gas Reactor, as well as other future gas reactors. The experiments will each consist of a single capsule that will contain seven separate stacks of graphite specimens. Six of the specimen stacks will have half of their graphite specimens under a compressive load, while the other half of the specimens will not be subjected to a compressive load during irradiation. The six stacks will be organized into pairs with a different compressive load being applied to the top half of each pair of specimen stacks. The seventh stack will not have a compressive load on the graphite specimens during irradiation. The specimens will be irradiated in an inert sweep gas atmosphere with on-line temperature and compressive load monitoring and control. There will also be the capability of sampling the sweep gas effluent to determine if any oxidation or off-gassing of the specimens occurs during initial start-up of the experiment. The final design phase for the first experiment was completed in September 2008, and the fabrication and assembly of the experiment test train as well as installation and testing of the control and support systems that will monitor and control the experiment during irradiation are being completed in early calendar 2009. The first experiment is scheduled to be ready for insertion in the ATR by April 30, 2009. This paper will discuss the design of the experiment including the test train and the temperature and compressive load monitoring, control, and data collection systems.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Next Generation Nuclear Plant Graphite Creep Experiment Irradiation in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Program will be irradiating six gas reactor graphite creep experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the United States Department of Energy’s lead laboratory for nuclear energy development. The ATR is one of the world’s premiere test reactors for performing long term, high flux, and/or large volume irradiation test programs. These graphite irradiations are being accomplished to support development of the next generation reactors in the United States. The graphite experiments will be irradiated over the next six to eight years to support development of a graphite irradiation performance data base on the new nuclear grade graphites now available for use in high temperature gas reactors. The goals of the irradiation experiments are to obtain irradiation performance data, including irradiation creep, at different temperatures and loading conditions to support design of the Next Generation Nuclear Plant (NGNP) Very High Temperature Gas Reactor, as well as other future gas reactors. The experiments will each consist of a single capsule that will contain six stacks of graphite specimens, with half of the graphite specimens in each stack under a compressive load, while the other half of the specimens will not be subjected to a compressive load during irradiation. The six stacks will have differing compressive loads applied to the top half of each pair of specimen stacks, while a seventh stack will not have a compressive load. The specimens will be irradiated in an inert sweep gas atmosphere with on-line temperature and compressive load monitoring and control. There will also be the capability of sampling the sweep gas effluent to determine if any oxidation or off-gassing of the specimens occurs during initial start-up of the experiment. The first experiment was inserted in the ATR in August 2009 and started its irradiation in September 2009. It is anticipated to complete its irradiation in early calendar 2011. This paper will discuss the design of the experiment including the test train and the temperature and compressive load monitoring, control, and the irradiation experience to date.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The Next Generation Nuclear Plant/Advanced Gas Reactor Fuel Irradiation Experiments in the Advanced Test Reactor

The United States Department of Energy’s Next Generation Nuclear Plant (NGNP) Program will be irradiating eight separate low enriched uranium (LEU) tri-isotopic (TRISO) particle fuel (in compact form) experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The ATR has a long history of irradiation testing in support of reactor development and the INL has been designated as the new United States Department of Energy’s lead laboratory for nuclear energy development. The ATR is one of the world’s premiere test reactors for performing long term, high flux, and/or large volume irradiation test programs. These irradiations and fuel development are being accomplished to support development of the next generation reactors in the United States, and will be irradiated over the next ten years to demonstrate and qualify new particle fuel for use in high temperature gas reactors. The goals of the irradiation experiments are to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel performance and fission product transport models and codes, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. The experiments, which will each consist of at least six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line temperature monitoring and control of each capsule. The sweep gas will also have on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The first experiment (designated AGR-1) started irradiation in December 2006, and the second experiment (AGR-2) is currently in the design phase. The design of test trains, as well as the support systems and fission product monitoring system that will monitor and control the experiment during irradiation will be discussed. In addition, the purpose and differences between the two experiments will be compared and the irradiation results to date on the first experiment will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of energy resolution with the NEXT-White silicon photomultipliers

The NEXT-White detector, a high-pressure gaseous xenon time projection chamber, demonstrated the excellence of this technology for future neutrinoless double beta decay searches using photomultiplier tubes (PMTs) to measure energy and silicon photomultipliers (SiPMs) to extract topology information. This analysis uses $^{83m}$Kr data from the NEXT-White detector to measure and understand the energy resolution that can be obtained with the SiPMs, rather than with PMTs. The energy resolution obtained of (10.9 ± 0.6)%, full-width half-maximum, is slightly larger than predicted based on the photon statistics resulting from very low light detection coverage of the SiPM plane in the NEXT-White detector. The difference in the predicted and measured resolution is attributed to poor corrections, which are expected to be improved with larger statistics. Furthermore, the noise of the SiPMs is shown to not be a dominant factor in the energy resolution and may be negligible when noise subtraction is applied appropriately, for high-energy events or larger SiPM coverage detectors. These results, which are extrapolated to estimate the response of large coverage SiPM planes, are promising for the development of future, SiPM-only, readout planes that can offer imaging and achieve similar energy resolution to that previously demonstrated with PMTs.[graphic not available: see fulltext]

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurement of radon-induced backgrounds in the NEXT double beta decay experiment

Here, the measurement of the internal $^{222}$Rn activity in the NEXT-White detector during the so-called Run-II period with $^{136}$Xe-depleted xenon is discussed in detail, together with its implications for double beta decay searches in NEXT. The activity is measured through the alpha production rate induced in the fiducial volume by $^{222}$Rn and its alpha-emitting progeny. The specific activity is measured to be $(38.1\pm 2.2~\mathrm{(stat.)}\pm 5.9~\mathrm{(syst.)})$~mBq/m$^3$. Radon-induced electrons have also been characterized from the decay of the $^{214}$Bi daughter ions plating out on the cathode of the time projection chamber. From our studies, we conclude that radon-induced backgrounds are sufficiently low to enable a successful NEXT-100 physics program, as the projected rate contribution should not exceed 0.1~counts/yr in the neutrinoless double beta decay sample.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2016 ASMS Workshop Review: Next Generation LC/MS: Critical Insights and Future Perspectives

The pilot workshop on BNext Generation LC/MS: Critical Insights and Future Perspectives was held on the evening of June 6, 2016 at the 64th ASMS Conference on Mass Spectrometry and Allied Topics held in San Antonio, TX. The workshop, chaired by Hongying Gao (Pfizer), consisted of stimulating talks from distinguished speakers and open discussion among the audience and invited presenters.The objectives of this workshop were to better understand the advances and limitations of current technologies; to exchange perspectives on the next generation LC/MS; and to discuss/debate the features of next generation LC/MS focusing on the following three questions: (1) What would the next generation LC/MS look like? (2) How would it change the way we do analysis? and (3) What fundamental issues need to be resolved? A real-world case in the biopharmaceutical industry was presented by Hongying Gao on the needs by industry for LC/MS innovation and technology advancements. The primary invited speakers were Alexander Makarov (Thermo Fisher Scientific) and Richard (Dick) Smith (Pacific Northwest National Laboratory). The open discussions started with Q&A and comments for Alexander Makarov and Dick Smith, followed by insights and perspectives from members of the audience and other invited presenters who shared their thoughts addressing the above questions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementing next generation assessment: A case example of a global challenge

IA regime design has evolved significantly over the past 50 years. Current thinking includes a package of next generation approaches such as the incorporation of requirements for regional and strategic IA, the consideration of cumulative effects and alternatives, and the inclusion of sustainability criteria and trade-off rules for decision makers. These suggested changes to IA design largely come from the recognition, through experience, of the weaknesses with current IA laws and regulations and needs to accommodate new understandings, for example about sustainability and complexity. Here, we reiterate the key generic components of next generation assessment that are broadly suitable for application in all jurisdictions with at least moderate assessment capacities, focusing on the necessary process requirements that could be captured in IA law, regulation and policy. Through an illustrative case example of Manitoba, Canada, we show how the components of next generation assessment might be implemented as a package in the context of an existing IA regime. Our application of these principles reveals the value of careful consideration of the current legislative frame as well as needs to cooperate with other jurisdictions. It shows, for example, the importance of experience with using streams of assessment and ensuring meaningful public participation. We conclude that many jurisdictions are likely to find moving consistently to this more comprehensive form of assessment to be a natural progression and that the greatest challenges will probably be in building interjurisdictional cooperation, ensuring good faith application of the sustainability criteria in decision making, and implementing regional and strategic assessments.

54 ENVIRONMENTAL SCIENCES↗

Radon and material radiopurity assessment for the NEXT double beta decay experiment

The ”Neutrino Experiment with a Xenon TPC” (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in {sup 136}Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is underway for several years based mainly on gamma-ray spectroscopy using ultra-low background germanium detectors in Canfranc but also on mass spectrometry techniques like GDMS and ICPMS. Components from shielding, pressure vessel, electroluminescence and high voltage elements and energy and tracking readout planes have been analyzed, helping in the final design of the experiment and in the construction of the background model. The latest measurements carried out will be presented and the implication on NEXT of their results will be discussed. The commissioning of the NEW detector, as a first step towards NEXT, has started in Canfranc; in-situ measurements of airborne radon levels were taken there to optimize the system for radon mitigation and will be shown too.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Preparing for the Next Generation of EUV Lithography at the Center for X-ray Optics

The introduction of EUV lithography into high-volume semiconductor manufacturing this year represents a monumental milestone for EUV technology. After nearly 30 years of development, the EUV research community has overcome many of the key obstacles required to enable the long-awaited integration of EUV lithography into the lab. These obstacles have included: the development of a stable, high-powered EUV source to ensure adequate exposure tool reliability; controlling EUV mask defects and mask contamination; and the development of EUV resists with adequate sensitivity, resolution, and line width roughness to meet the tolerances required for high-volume manufacturing. As EUV moves into its second generation, there will be new challenges facing the community as it works to push EUV technology into the future. Smaller feature sizes will be achieved using higher numerical aperture optics, which are planned to have an anamorphic geometry (asymmetric magnification and numerical aperture between horizontal and vertical axes) to overcome 3D effects at the mask. This new geometry and its larger angle ranges make understanding mask absorber and multilayer effects all the more important. New methods for high-NA wavefront metrology need to be tested to ensure that these optical systems can be aligned to operate with minimal aberrations. Mask defects need to continue to be studied, and the inclusion of EUV pellicles in the roadmap requires that mask inspection and review systems adapt accordingly. Finally, new resists must be developed to support the increased resolution of feature sizes below 8 nm half pitch. The Center for X-ray Optics (CXRO) at Berkeley Lab has been a leader in EUV research for the past 25 years. Leveraging 13.5 nm EUV light from the Advanced Light Source synchrotron facility, CXRO is home to several EUV and soft X-ray (SXR) research tools that have provided important insights into EUV resists, masks, and coatings. The 0.3 NA Microfield exposure tool (MET) and Dose Calibration Tool (DCT) have played an instrumental role in the development of the current generation of high-resolution EUV resists. The Actinic Inspection Tool (AIT) and its successor, SHARP, have enabled aerial image analysis, providing key insights into mask defects, 3D mask effects, illumination, and aberrations. And the CXRO Reflectometer continues to be the industry standard in multilayer coating and EUV mask scattering metrology. To address the new challenges facing the next generation of EUV lithography, CXRO has upgraded its suite of EUV research tools. The 0.5 NA MET5 is a newly commissioned projection lithography tool that is capable of printing feature sizes down to 8 nm half pitch. A new radiation chemistry program is deploying several techniques aimed at dissecting the role of primary photoelectrons and secondary electrons in EUV resists. The SHARP microscope has been outfitted with anamorphic zone plate lenses that can emulate the geometry of next-generation EUV scanners, and the reflectometer has been applied to new scattering experiments for the purpose of understanding the 3D effects of EUV mask multilayers, as well as determining mask properties using scattering profiles. In parallel with these tools, the CXRO High-NA Wavefront Sensing Program is developing high-resolution wavefront sensors suitable for measuring aberrations at high NA. This article presents an overview of these programs and describes how they will address the primary challenges that face the EUV community as it moves to the next generation of EUV lithography.

47 OTHER INSTRUMENTATION↗

The ICRP, MELODI, and ALLIANCE workshop on effects of ionizing radiation exposure in offspring and next generations: a summary of discussions

Task Group 121 – Effects of ionizing radiation exposure in offspring and next generations – is a task group under the Committee 1 of the International Commission on Radiological Protection (ICRP), approved by the Main Commission on 18th November 2021. The main goals of Task Group 121 are to (1) review and update the scientific literature of relevance to radiation-related effects in the offspring of parent(s) exposed to ionizing radiation in both human and non-human biota; (2) to assess preconceptional and intrauterine effects of radiation exposure and related morbidity and mortality; and, (3) to provide advice about the level of evidence and how to consider these preconceptional and postconceptional effects in the system of radiological protection for humans and non-human biota. The Task Group is reviewing relevant literature since Publication 90 ‘Biological effects after prenatal irradiation (embryo and fetus)’ (2003) and will include radiation-related effects on future generations in humans, animals, and plants. This review will be conducted to account for the health effects on offspring and subsequent generations in the current system of radiological protection. Radiation detriment calculation will also be reviewed. Finally, preliminary recommendations will be made to update the integration of health effects in offspring and next generations in the system of radiological protection. A Workshop, jointly organized by ICRP Task Group 121 and European Radiation Protection Research Platforms MELODI and ALLIANCE was held in Budapest, Hungary, from 31st May to 2nd June 2022. Participants discussed four important topics: (1) hereditary and epigenetic effects due to exposure of the germ cell line (preconceptional exposure), (2) effects arising from exposure of the embryo and fetus (intrauterine exposure), (3) transgenerational effects on biota, and (4) its potential impact on the system of radiological protection. Based on the discussions and presentations during the breakout sessions, newer publications, and gaps on the current scientific literature were identified. For instance, there are some ongoing systematic reviews and radiation epidemiology reviews of intrauterine effects. There are newer methods of Monte Carlo simulation for fetal dosimetry, and advances in radiation genetics, epigenetics, and radiobiology studies. While the current impact of hereditary effects on the global detriment was reported as small, the questions surrounding the effects of radiation exposure on offspring and the next generation are crucial, recurring, and with a major focus on exposed populations. Here, this article summarizes the workshop discussions, presentations, and conclusions of each topic and introduces the special issue of the International Journal of Radiation Biology resulting from the discussions of the meeting.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Observing the next galactic supernova

No supernova (SN) in the Milky Way has been observed since the invention of the optical telescope, instruments for other wavelengths, neutrino detectors, or gravitational wave observatories. It would be a tragedy to miss the opportunity to fully characterize the next one. To aid preparations for its observations, we model the distance, extinction, and magnitude probability distributions of a successful Galactic core-collapse supernova (ccSN), its shock breakout radiation, and its massive star progenitor. We find, at very high probability (≅ 100%), that the next Galactic SN will easily be detectable in the near-IR and that near-IR photometry of the progenitor star very likely (≅ 92%) already exists in the Two Micron All Sky Survey. Most ccSNe (98%) will be easily observed in the optical, but a significant fraction (43%) will lack observations of the progenitor due to a combination of survey sensitivity and confusion. If neutrino detection experiments can quickly disseminate a likely position (∼3°), we show that a modestly priced IR camera system can probably detect the shock breakout radiation pulse even in daytime (64% for the cheapest design). Neutrino experiments should seriously consider adding such systems, both for their scientific return and as an added and internal layer of protection against false triggers. We find that shock breakouts from failed ccSNe of red supergiants may be more observable than those of successful SNe due to their lower radiation temperatures. We review the process by which neutrinos from a Galactic ccSN would be detected and announced. We provide new information on the EGADS system and its potential for providing instant neutrino alerts. We also discuss the distance, extinction, and magnitude probability distributions for the next Galactic Type Ia supernova (SN Ia). Based on our modeled observability, we find a Galactic ccSN rate of 3.2{sub −2.6}{sup +7.3} per century and a Galactic SN Ia rate of 1.4{sub −0.8}{sup +1.4} per century for a total Galactic SN rate of 4.6{sub −2.7}{sup +7.4} per century is needed to account for the SNe observed over the last millennium, which implies a Galactic star formation rate of 3.6{sub −3.0}{sup +8.3} M {sub ☉} yr{sup –1}.

79 ASTRONOMY AND ASTROPHYSICS↗

Observational prospects of self-interacting scalar superradiance with next-generation gravitational-wave detectors

Abstract Current- and next-generation gravitational-wave observatories may reveal new, ultralight bosons. Through the superradiance process, these theoretical particle candidates can form clouds around astrophysical black holes and result in detectable gravitational-wave radiation. In the absence of detections, constraints—contingent on astrophysical assumptions—have been derived using LIGO-Virgo-KAGRA data on boson masses. However, the searches for ultralight scalars to date have not adequately considered self-interactions between particles. Self-interactions that significantly alter superradiance dynamics are generically present for many scalar models, including axion-like dark matter candidates and string axions. We implement the most complete treatment of particle self-interactions available to determine the gravitational-wave signatures expected from superradiant scalar clouds and revisit the constraints obtained in a past gravitational-wave search targeting the black hole in Cygnus X-1. We also project the reach of next-generation gravitational-wave observatories to scalar particle parameter space in the mass-coupling plane. We find that while proposed observatories have insufficient reach to self-interactions that can halt black hole spin-down, next-generation observatories are essential for expanding the search beyond gravitational parameter space and can reach a mass and interaction scale of ∼ 10 − 13 –10 −12 eV / c 2 and ≳ 10 17 GeV, respectively.

Collaviti, Spencer (ORCID:0009000372808236)↗

Next steps in high-repetition-rate laser development for Thomson scattering

Design of a next generation high-rep-rate laser system is underway, aiming for a maximum rep rate of 100 kHz for 1 ms. This will be a "pulse-burst" laser, which is a type of heat-capacity laser. Heat-capacity laser operation is characterized by a burst of pulses of limited duration, with burst length ≤100 ms and pulse rep rate ≥1 kHz. Waste heat accumulates in the laser rod during the burst. This heat is deposited evenly throughout the rod volume, with very little heat removed during the burst, such that temperature rises evenly across the rod radius. Thus beam distortion due to thermal gradients is small. Heat is removed from the rod after the burst, with typically tens of seconds between bursts. Pulse-burst operation of flashlamp pumped Nd:YAG lasers is a cost-effective route to high-rep-rate capability. Pulse-burst laser systems with "fast burst" rep rates in the range of 10–20 kHz have been built for the Thomson scattering diagnostics on MST, NSTX-U, and LHD. For Thomson scattering diagnostic application, the typical requirements are 1064 nm, 1–2 J/pulse, ≤30 ns FWHM pulse, with a top-hat beam profile. A major requirement for this next generation laser system is flexibility in burst sequence programs, ranging from 1 kHz for 100 ms to 100 kHz for 1 ms, and a variety of scenarios in between so that operation can be tailored to plasma experiment requirements. Flashlamp pumping will be used for this next generation laser because it is inexpensive and flexible. A new switch-regulated flashlamp driver will provide improved flashlamp control at lower cost. Additional design issues such as the optimum flashlamp pumping spectrum and optimum Nd doping will be addressed. The use of commercial off-the-shelf components will be maximized in this laser system so that pulse-burst systems can be developed and built by others for new applications.

47 OTHER INSTRUMENTATION↗

Quantum simulation of Heisenberg spin chains with next-nearest-neighbor interactions in coupled cavities

We propose a scheme to simulate one-dimensional XXZ-type Heisenberg spin models with competing interactions between nearest neighbors (NNs) and next NNs in photon-coupled microcavities. Our scheme exploits the rich resources and flexible controls available in such a system to realize arbitrarily adjustable ratios between the effective NN and next-NN coupling strengths. Such a powerful capability allows us to simulate frustration phenomena and disorder behaviors in one-dimensional systems arising from next-NN interactions, a large class of problems of great importance in condensed-matter physics. Our scheme is robust due to the lack of atomic excitations, which suppresses spontaneous emission and cavity decay strongly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hamiltonian of two spinning compact bodies with next-to-leading order gravitational spin-orbit coupling

A Hamiltonian formulation is given for the gravitational dynamics of two spinning compact bodies to next-to-leading order (G/c{sup 4} and G{sup 2}/c{sup 4}) in the spin-orbit interaction. We use a novel approach (valid to linear order in the spins) which starts from the second-post-Newtonian metric (in Arnowitt-Deser-Misner coordinates) generated by two spinless bodies and computes the next-to-leading order precession, in this metric, of suitably redefined ''constant-magnitude'' 3-dimensional spin vectors S{sub 1}, S{sub 2}. We prove the Poincare invariance of our Hamiltonian by explicitly constructing 10 phase-space generators realizing the Poincare algebra. A remarkable feature of our approach is that it allows one to derive the orbital equations of motion of spinning binaries to next-to-leading order in spin-orbit coupling without having to solve Einstein's field equations with a spin-dependent stress tensor. We show that our Hamiltonian (orbital and spin) dynamics is equivalent to the dynamics recently obtained by Faye, Blanchet, and Buonanno, by solving Einstein's equations in harmonic coordinates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fermion mass at next-to-leading order in the hard thermal loop effective theory

The calculation of the real part of a quasiparticle dispersion relation at next-to-leading order in the hard thermal loop effective theory is a very difficult problem. Even though the hard thermal loop effective theory is almost 20 years old, there is only one next-to-leading order calculation of the real part of a quasiparticle dispersion relation in the literature [H. Schulz, Nucl. Phys. B413, 353 (1994)]. In this paper, we calculate the fermion mass in QED and QCD at next-to-leading order. For QED the result is M=eT/{radical}(8)(1-(1.427{+-}0.02)e/4{pi}) and for QCD with N{sub f}=2 and N{sub c}=3 we obtain M=gT/{radical}(6)(1+(1.867{+-}0.02)g/4{pi})

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Imaginary part of the next-to-leading-order static gluon self-energy in an anisotropic plasma

Using hard-loop (HL) effective theory for an anisotropic non-Abelian plasma, which even in the static limit involves nonvanishing HL vertices, we calculate the imaginary part of the static next-to-leading-order gluon self-energy in the limit of a small anisotropy and with external momentum parallel to the anisotropy direction. At leading order, the static propagator has spacelike poles corresponding to plasma instabilities. On the basis of a calculation using bare vertices, it has been conjectured that, at next-to-leading order, the static gluon self-energy acquires an imaginary part which regulates these spacelike poles. We find that the one-loop resummed expression taken over naively from the imaginary-time formalism does yield a nonvanishing imaginary part even after including all HL vertices. However, this result is not correct. Starting from the real-time formalism, which is required in a nonequilibrium situation, we construct a resummed retarded HL propagator with correct causality properties and show that the static limit of the retarded one-loop-resummed gluon self-energy is real. This result is also required for the time-ordered propagator to exist at next-to-leading order.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Top-pair forward-backward asymmetry beyond next-to-leading order

We make use of recent results in effective theory and higher-order perturbative calculations to improve the theoretical predictions of the QCD contribution to the top-quark pair production forward-backward asymmetry at the Tevatron. In particular, we supplement the fixed-order next-to-leading order calculation with higher-order corrections from soft-gluon resummation at next-to next-to-leading order accuracy performed in two different kinematic schemes, which allows us to make improved predictions for the asymmetry in the pp and tt rest frames as a function of the rapidity and invariant mass of the tt pair. Furthermore, we provide binned results which can be compared with the recent measurements of the forward-backward asymmetry in events with a large pair invariant mass or rapidity difference. Finally, we calculate at NLO+NNLL order the top-quark charge asymmetry at the LHC as a function of a lower rapidity cutoff for the top and antitop quarks.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗