Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “N”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1997

The Heats of Formation of SiCl+n, for n=1-4

The heats of formation of SiCl(sub n) and SiCl+(sub n), for n=1-4, have been determined using the G2(B3LYP/MP2/CC) approach. The results for the neutral systems are in very good agreement with previous work. High level calibration calculations show that ion results have about the same accuracy as the neutrals, and allow us to refine the G2(B3LYP/MP2/CC) values. The calculations show that the adiabatic IP of SiCl4 is about 7 kcal/mol smaller than the accepted value. Using a rigid rotor/harmonic oscillator approximation, the temperature dependence of the heat of formation, heat capacity, and entropy are computed for 300 to 4000 K and fit to a polynomial.

Bauschlicher, Charles W., Jr.↗
NASA NTRS1987

Preparation of 7-hydroxy-2-oxoindolin-3-ylacetic acid and its [13C2], [5-n-3H], and [5-n-3H]-7-O-glucosyl analogues for use in the study of indol-3-ylacetic acid catabolism

An improved synthesis of 7-hydroxy-2-oxoindolin-3-ylacetic acid via the base-induced condensation reaction between oxalate esters and 7-benzyloxyindolin-2-one is described. 7-Benzyloxyindolin-2-one was prepared in four steps and 50% overall yield from 3-hydroxy-2-nitrotoluene. The yield of the title compound from 7-benzyloxyindolin-2-one was 56%. This route was used to prepare 7-hydroxy-2-oxoindolin-3-yl[13C2]acetic acid in 30% yield from [13C2]oxalic acid dihydrate. The method could not be extended to the preparation of the corresponding [14C2]-compound. However, an enzyme preparation from Zea mays roots catalysed the conversion of carrier-free [5-n-3H]indol-3-ylacetic acid with a specific activity of 16.7 Ci mmol-1 to a mixture of 7-hydroxy-2-oxo[5-n-3H]indolin-3-ylacetic acid and its [5-n-3H]-7-O-glucoside in ca. 3 and 40% radiochemical yield respectively. The glucoside was converted into the 7-hydroxy compound in 80% yield by means of beta-glucosidase.

Non-NASA Center↗
DOE OSTI2025

Charge radii measurements of exotic tin isotopes in the proximity of $N=50$ and $N=82$

We report nuclear charge radii for the isotopes $^{104-134}$Sn, measured using two different collinear laser spectroscopy techniques at ISOLDE-CERN. These measurements clarify the archlike trend in charge radii along the isotopic chain and reveal an odd-even staggering that is more pronounced near the $N=50$ and $N=82$ shell closures. The observed local trends are well described by both nuclear density functional theory and valence space in-medium similarity renormalization group calculations. Both theories predict appreciable contributions from beyond-mean-field correlations to the charge radii of the neutron-deficient tin isotopes. The models fall short, however, of reproducing the magnitude of the known $B(E2)$ transition probabilities, highlighting the remaining challenges in achieving a unified description of both ground-state properties and collective phenomena.

FOS: Physical sciences↗
DOE OSTI2025

Remeasurement of the 239 Pu(n,f)/ 235 U(n,f) Cross-Section Ratio with the NIFFTE fission Time Projection Chamber Using Vapor-deposited Targets

The NIFFTE fission Time Projection Chamber (fissionTPC) has been used to measure the 239 Pu(n,f)/ 235 U(n,f) cross-section ratio for neutron-induced fission in the range of 0.1–100 MeV, with high precision. A white neutron source was provided by the Los Alamos Neutron Science Center, where the experiment was conducted as a remeasurement to evaluate a roughly 2% discrepancy of the previous fissionTPC results with ENDF/B-VIII.0. Further, a detailed accounting of measurement uncertainties was performed, based on the fissionTPC's novel ability to provide three-dimensional reconstruction of fission-fragment ionization profiles. Current results obtained using a vapor-deposited, highly uniform 239 Pu target, in comparison to the measurement published in 2021, where a 239 Pu electroplated target was used, are presented and discussed. The remeasurement presented here is in agreement with the previous fissionTPC result within measurement uncertainties.

235U↗
DOE OSTI2022

Poly( N -vinylpyrrolidone)- block -Poly(dimethylsiloxane)- block -Poly( N -vinylpyrrolidone) Triblock Copolymer Polymersomes for Delivery of PARP1 siRNA to Breast Cancers

Nearly 20% of HER2-positive breast cancers develop resistance to HER2-targeted therapies requiring the use of advanced therapies. Silencing RNA therapy may be a powerful modality for treating resistant HER2 cancers due to its high specificity and low toxicity. However, the systemic administration of siRNAs requires a safe and efficient delivery platform because of siRNA’s low stability in physiological fluids, inefficient cellular uptake, immunoreactivity, and rapid clearance. We have developed theranostic polymeric vesicles to overcome these hurdles for encapsulation and delivery of small functional molecules and PARP1 siRNA for in vivo delivery to breast cancer tumors. The 100 nm polymer vesicles were assembled from biodegradable and non-ionic poly(N-vinylpyrrolidone) 14 -block-poly(dimethylsiloxane) 47 -block-poly(N-vinylpyrrolidone) 14 triblock copolymer PVPON 14 -PDMS 47 -PVPON 14 using nanoprecipitation and thin-film hydration. We demonstrated that the vesicles assembled from the copolymer covalently tagged with the Cy5.5 fluorescent dye for in vivo imaging could also encapsulate the model drug with high loading efficiency (40%). The dye-loaded vesicles were accumulated in tumors after 18 h circulation in 4TR breast tumor-bearing mice via passive targeting. We found that PARP1 siRNA encapsulated into the vesicles was released intact (13%) into solution by the therapeutic ultrasound treatment as quantified by gel electrophoresis. Additionally, the PARP1 siRNA-loaded polymersomes inhibited the proliferation of MDA-MB-361TR cells by 34% after 6 days of treatment by suppressing the NF-kB signaling pathway, unlike their scrambled siRNA-loaded counterparts. Finally, the treatment by PARP1 siRNA-loaded vesicles prolonged the survival of the mice bearing 4T1 breast cancer xenografts, with the 4-fold survival increase, unlike the untreated mice after 3 weeks following the treatment. These biodegradable, non-ionic PVPON 14 -PDMS 47 -PVPON 14 polymeric nanovesicles capable of the efficient encapsulation and delivery of PARP1 siRNA to successfully knock down PARP1 in vivo can provide an advanced platform for the development of precision-targeted therapeutic carriers, which could help develop highly effective drug delivery nanovehicles for breast cancer gene therapy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Effects of the Hydrophobic Block Length Ratio of Poly(vinylbenzyl N -methylpiperidinium carbonate)- b -polyethylene- b -poly(vinylbenzyl N -methylpiperidinium carbonate) Block Copolymers for Anion Exchange Membrane Electrolysis

Electrolysis of water to produce hydrogen from renewable electricity is an extremely attractive strategy to reduce energy dependence on fossil fuels. Development of membrane and ionomer materials that maintain high performance with long lifetimes is needed. We developed and investigated the performance and durability of a series of polyethylene-based ABA triblock copolymer anion exchange ionomer and membrane (AEI, AEM) materials for anion exchange membrane water electrolysis. Poly(vinylbenzyl N-methylpiperidinium carbonate)-b-polyethylene-b-poly(vinylbenzyl N-methylpiperidinium carbonate) was synthesized with different hydrophobic/hydrophilic block ratios (1.02:1, 2.58:1, and 4.46:1) resulting in a range of ion exchange capacities (1.1–1.8 meq g –1 ) and water swelling (23–154%) characteristics. All AEMs showed full anionic dissociation, as evidenced by linear Arrhenius correlations, and excellent carbonate conductivity of 8–94 mS cm –1 at 50 °C. Hydrophilic phase separation may offer superior chemical durability by only wetting the ion-conducting region of the polymer and avoiding attack at the nonwetted backbone. We evaluated the performance and durability of these AEMs as a function of hydrophobic polyethylene (PE) content. The AEM containing the least amount of PE displayed the highest performance of 1 A cm –2 at 2.3 V but degraded at 40 mV h –1 before catastrophically failing after <3 h at 0.5 A cm –2 . With greater PE-containing AEMs, the degradation rate was reduced by 3 orders of magnitude with only a 0.2 V increase in voltage. Constant current electrolysis for 50 h resulted in a voltage change of 0.3 mV h –1 in a single-cell water electrolyzer and 1 M potassium carbonate. In a 600 h test, the voltage change in the final 200 h was impressively low for an experimental film, 58 μV h –1 . Postmortem analysis indicated that the membrane did not thin and that water becomes more tightly hydrogen-bound in the polymer after electrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measurements of the Elliptic and Triangular Azimuthal Anisotropies in Central He 3 + Au , d + Au and p + Au Collisions at s N N = 200 GeV

The elliptic (v 2 ) and triangular (v 3 ) azimuthal anisotropy coefficients in central 3He + Au, d + Au, and p + Au collisions at $\sqrt{S_{NN}}$ = 200 GeV are measured as a function of transverse momentum (P T ) at midrapidity (|n| < 0.9) via the azimuthal angular correlation between two particles both at |n| < 0.9 while the v 2 (P T ) values depend on the colliding systems, the v 3 (P T ) values are system independent within the uncertainties, suggesting an influence on eccentricity from subnucleonic fluctuations in these small-sized systems. Furthermore, these results also provide stringent constraints for the hydrodynamic modeling of these systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1969

Linear operation of a p-n-p-n tetrode.

Four terminal silicon planar p-n-p-n model operating as semiconductor small signal linear tetrode amplifier, discussing properties and mathematical models

Voulgaris, N. C.↗
DOE OSTI2020

Imaging the Phase Evolution of the Li-N-H Hydrogen Storage System

Complex metal hydrides provide high-density hydrogen storage, which is essential for vehicular applications. However, the utility of these materials has been limited by thermodynamic and kinetic barriers present during the dehydrogenation and rehydrogenation processes as new phases form inside parent phases. Better understanding of the mixed-phase mesostructures and their interfaces may assist in improving cyclability. In this work, the evolution of the phases during hydrogenation of lithium nitride and dehydrogenation of lithium amide with lithium hydride are probed with scanning-transmission X-ray microscopy at the nitrogen K edge. With this technique, intriguing core-shell structures were observed in particles of both partially hydrogenated Li 3 N and partially dehydrogenated LiNH 2 + 2 LiH. The potential contributions of both internal hydrogen mobility and interfacial energies on the generation of these structures are discussed.

08 HYDROGEN↗
DOE OSTI2023

Four‐Electron Oxidative Addition of an N=N Double Bond at a Chromium Metallocyclopropene**

Abstract This report describes the synthesis of a pseudo‐tetrahedral chromium alkyne complex supported by a bidentate phosphinimide ligand and its reactivity with an azobenzene derivative. Characterization of the former by structural and computational methods reveals an unprecedented extent of alkyne activation by a formal chromium(II) center, suggesting that this complex is best described as a chromium(IV)‐metallocyclopropene. Exposure of this compound to 4,4′‐difluoroazobenzene results in the formation of a chromium(VI) diimido complex, which constitutes a rare 4‐electron oxidative addition of an N=N double bond. The isolation of a chromium(IV)‐hydrazido intermediate enabled mechanistic investigations of this challenging bond cleavage process. This work substantiates the notion that terminal phosphinimide ligands can engender first‐row transition metal ions with exceptional reactivity.

Chemistry↗
DOE OSTI2021

Green synthesis of sulfur‐doped g‐C 3 N 4 nanosheets for enhanced removal of oxytetracycline under visible‐light irradiation and reduction of its N ‐nitrosodimethylamine formation potential

Abstract BACKGROUND In this study, sulfur‐doped g‐C 3 N 4 (SCN) nanosheets were synthesized using thiourea as a precursor, and then used to catalyze the degradation of oxytetracycline (OTC) under visible‐light irradiation. OTC was chosen as target contaminant because of it being an important precursor of N ‐nitrosodimethylamine (NDMA). RESULTS The removal of OTC was influenced by its initial concentration, initial pH, SCN dosage and water matrices. OTC (≤10 mg L −1 ) was almost completely removed in 40 min under the conditions of an initial pH of 7.0 and a SCN dose of 1.0 g L −1 , and its degradation was well described by the pseudo‐first‐order kinetics model. Water matrices would also influence the degradation of OTC in the system. Electron paramagnetic resonance analysis and trapping experiments confirmed that the function of the radicals for OTC removal followed the order of • O 2 − > • OH > h + . Eight transformation products were determined during the degradation of OTC, it being removed through four pathways: methyl oxidization, demethylation, decarbonylation and secondary alcohol oxidation. SCN was stable in the system, as the removal efficiency of OTC was not significantly reduced even after three recycles. In addition, 55.5% of NDMA formation potential of OTC was reduced after SCN catalytic oxidation. CONCLUSIONS The results imply that the visible‐light‐driven SCN catalytic oxidation is an effective technology not only for the removal of OTC but also for the reduction of NDMA formation potential. © 2021 Society of Chemical Industry

Dou, Yicheng↗
DOE OSTI2022

Demonstration of no catalytical activity of Fe–N–C and Nb–N–C electrocatalysts toward nitrogen reduction using in–line quantification

Ammonia (NH 3 ) production via the electrochemical nitrogen reduction reaction (NRR) is a promising method for sustainable generation of this important chemical. Efforts are ongoing in finding an efficient, stable, and selective catalyst that will enable the reaction. However, progress is hindered in the field due to lack of reproducibility, most likely a consequence of reports of false-positive results due to improper measurement control and methods. In this study, we explore the NRR activity of a promising class of single atom catalysts, transition metal-nitrogen-carbon (M-N-C) electrocatalysts. Using a state-of-the-art in-line ammonia quantification methodology, with detection limit as low as 1 ppb for ammonia, we show that single atom Nb and Fe embedded in a stable carbon and nitrogen framework do not electrochemically reduce N 2 to NH 3 . Critically, this demonstrates that our experimental setup with in-line sequential injection analysis successfully excludes ammonia contamination from the gas supply and atmospheric sources, allowing for thorough and high-throughput examination of potential NRR catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Extraction chromatography of 225 Ac and lanthanides on N,N-dioctyldiglycolamic acid /1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide solvent impregnated resin

The alpha-emitter 225 Ac (t 1/2 = 9.92 d) is currently under development for targeted alpha-particle therapy of cancer, and accelerator production of 225 Ac via proton irradiation of thorium targets requires robust separations of 225 Ac from chemically similar fission product lanthanides. Additionally, the lanthanide elements represent critical components in modern technologies, and radiolanthanides such as 140 Nd (t 1/2 = 3.37 d) also have potential application in the field of nuclear medicine. The ionic liquid, 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([Bmim][NTf 2 ]), combined with the diglycolamide extractant, N,N-dioctyldiglycolamic acid (DODGAA), was adsorbed on macroporous resin support to produce a solvent impregnated resin (SIR) that was investigated for separations of 225 Ac and lanthanides. The equilibrium distribution coefficients (Kd) of the rare earth elements (Sc(III), Y(III), Ln(III)), 225 Ac(III), Th(IV), and U(VI) on the prepared DODGAA/[Bmim][NTf 2 ]-SIR were determined from batch adsorption experiments in HCl and HNO 3 media. The DODGAA/[Bmim][NTf2]-SIR exhibited preferential uptake of the heavier lanthanide elements while allowing for the separation of the lighter lanthanides. Column separations utilizing the DODGAA/[Bmim][NTf 2 ]-SIR were effective at separating the lighter lanthanides from each other, and separating 225 Ac from a mixture of lanthanides, 213 Bi, and 225 Ra without the need for additional complexing agents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗