Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Analysis and testing of multilayer and aerogel insulation configurations

Multilayer insulation systems that have robust operational characteristics have long been a goal of many research projects. Such thermal insulation systems may need to offer some degree of structural support and/or mechanical integrity during loss of vacuum scenarios while continuing to provide insulative value to the vessel. Aerogel-based composite blankets can be the best insulation materials in ambient pressure environments; in high vacuum, the thermal performance of aerogel improves by about one order of magnitude. Standard multilayer insulation (MLI) is typically 50% worse at ambient pressure and at soft vacuum, but as much as two or three orders of magnitude better at high vacuum. Different combinations of aerogel blanket and multilayer insulation materials have been tested at the Cryogenics Test Laboratory of NASA Kennedy Space Center. Analysis performed at Oak Ridge National Laboratory showed an importance to the relative location of the MLI and aerogel blankets. Apparent thermal conductivity testing under cryogenicvacuum conditions was performed to verify the analytical conclusion. Tests results are shown to be in agreement with the analysis which indicated that the best performance is obtained with aerogel layers located in the middle of the blanket insulation system.

07 ISOTOPE AND RADIATION SOURCES↗

The NSLS-II Multilayer Laue Lens Deposition System

The NSLS-II[1] program has a requirement for an unprecedented level of x-ray nanofocusing and has selected the wedged multilayer Laue lens[2,3] (MLL) as the optic of choice to meet this goal. In order to fabricate the MLL a deposition system is required that is capable of depositing depth-graded and laterally-graded multilayers with precise thickness control over many thousands of layers, with total film growth in one run up to 100m thick or greater. This machine design expounds on the positive features of a rotary deposition system[4] constructed previously for MLLs and will contain multiple stationary, horizontally-oriented magnetron sources where a transport will move a substrate back and forth in a linear fashion over shaped apertures at well-defined velocities to affect a multilayer coating.

43 PARTICLE ACCELERATORS↗

Chemical and magnetic structure of uranium/gadolinium multilayers studied by transmission

We present a multitechnique approach to study the detailed chemical and magnetic structure of uranium/gadolinium multilayers. At low temperature the saturation magnetization is found to be {approx}60% of that of bulk gadolinium. We address this problem, which is found in many other multilayers and suggest a model that may have wider applications. Transmission electron microscopy images indicate a microstructure, consistent with a columnar growth of Gd with crystallites of the order 20 {yields} 100{angstrom}. Off-specular neutron scattering is most strongly visible at saturation field, indicating that Gd moments are not aligned with the applied field. X-ray resonant magnetic scattering provides proof of coupled in-plane length scales for both the structural and the magnetic roughness. A detailed x-ray scattering study of both the specular and off-specular reflectivities has been used to investigate the in-plane structure of the multilayers. We calculate the roughness and transverse correlation cut-off length, {zeta}{sub x} = 120 {+-} 30{angstrom}, and present a simple model to determine an average column size of 27 {+-} 6{angstrom} and a reduction in the magnetic saturation of {approx}40%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Large Aperture and Wedged Multilayer Laue Lens for X-ray Nanofocusing

Diffraction optics fabricated from multilayers offer an intriguing alternative to lithography-based zone plates due to their advantages of virtually limitless aspect ratio and extremely small feature size. However, other issues, intrinsic to thin-film deposition, such as film stress and deposition rate instability, for example, limit the total achievable aperture. Over the last decade, Multilayer Laue Lens (MLLs) have progressed from a mere curiosity with initial aperture sizes in the 3–10 μm range, to real beamline-deployed optics with apertures in the 40–50 μm range (X. Huang, et al., Scientific Reports 3, 3562 (2013); E. Nazaretski, et al., Rev. Sci. Instrum. 85, 033707 (2014); E. Nazaretski, et al., Journal of Synchrotron Radiation 24, 1113 (2017)). By optimizing deposition conditions and incorporating new materials, MLLs have now broken the 100 μm thickness milestone. A flat WSi 2 /Al–Si MLL with a deposition thickness of 102 μm, the largest MLL to date, is reviewed. New large aperture wedged MLLs (wMLL), which were first fabricated by APS in 2006 using the WSi 2 /Si material system, are presented which demonstrate high focusing efficiency across a broad energy range. Furthermore, these results confirm findings by other groups who have also independently fabricated wMLL (A. J. Morgan, et al., Scientific Reports 5, 9892 (2015); S. Bajt, et al., Nature Light: Science and Applications 7, 17162 (2017)) based on a similar material system.

47 OTHER INSTRUMENTATION↗

Unveiling the Emergent Traits of Chiral Spin Textures in Magnetic Multilayers

Abstract Magnetic skyrmions are topologically wound nanoscale textures of spins whose ambient stability and electrical manipulation in multilayer films have led to an explosion of research activities. While past efforts focused predominantly on isolated skyrmions, recently ensembles of chiral spin textures, consisting of skyrmions and magnetic stripes, are shown to possess rich interactions with potential for device applications. However, several fundamental aspects of chiral spin texture phenomenology remain to be elucidated, including their domain wall (DW) structure, thermodynamic stability, and morphological transitions. Here the evolution of these textural characteristics are unveiled on a tunable multilayer platform—wherein chiral interactions governing spin texture energetics can be widely varied—using a combination of full‐field electron and soft X‐ray microscopies with numerical simulations. With increasing chiral interactions, the emergence of Néel helicity, followed by a marked reduction in domain compressibility, and finally a transformation in the skyrmion formation mechanism are demonstrated. Together with an analytical model, these experiments establish a comprehensive microscopic framework for investigating and tailoring chiral spin texture character in multilayer films.

36 MATERIALS SCIENCE↗

Stabilizing Li–S Battery Through Multilayer Encapsulation of Sulfur

Abstract Advancements in portable electronic devices and electric powered transportation has drawn more attention to high energy density batteries, especially lithium–sulfur batteries due to the low cost of sulfur and its high energy density. However, the lithium–sulfur battery is still quite far from commercialization mostly because of incompatibility between all major components of the battery—the cathode, anode, and electrolyte. Here a methodology is demonstrated that shows promise in significantly improving battery stability by multilayer encapsulation of sulfur particles, while using conventional electrolytes, which allows a long cycle life and an improved Coulombic efficiency battery at low electrolyte feeding. The multilayer encapsulated sulfur battery demonstrates a Coulombic efficiency as high as 98%, when a binder‐free electrode is used. It is also shown that the all‐out self‐discharge of the cell after 168 h can be reduced from 34% in the regular sulfur battery to less than 9% in the battery with the multilayer encapsulated sulfur electrode.

Ansari, Younes↗

Reducing Antisolvent Use in the STRAP Process by Enabling a Temperature–Controlled Polymer Dissolution and Precipitation for the Recycling of Multilayer Plastic Films

The recently reported processing strategy called solvent-targeted recovery and precipitation (STRAP) enables deconstruction of multilayer plastic packaging films into their constituent resins by selective dissolution. It uses a series of solvent washes that are guided by thermodynamic calculations of polymer solubility. In this work, the use of antisolvents in the STRAP process was reduced and solvent mixtures were considered to enable the temperature-controlled dissolution and precipitation of the target polymers in multilayer films. This was considered as a means to further improve the STRAP process and its estimated costs. Two STRAP approaches were compared based on different polymer precipitation techniques: precipitation by the addition of an antisolvent (STRAP-A) and precipitation by decreasing the solvent temperature (STRAP-B). Both approaches were able to separate the constituent polymers in a post-industrial film composed primarily of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET) with near 100 % material efficiency. Technoeconomic analysis indicates that the minimum selling price (MSP) of the recycled resins with STRAP-B is 21.0 % lower than that achieved with STRAP-A. This provides evidence that thermally driven polymer precipitation is an option to reduce the use of antisolvents, making the STRAP process more economically and environmentally attractive. A third process, STRAP-C, was demonstrated with another post-industrial multilayer film of a different composition. Here, the results demonstrate that this process can also recover polymers at similar costs to those of virgin resins, indicating that the STRAP technology is flexible and can remain economically competitive as the plastic feed complexity is increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extracting interface locations in multilayer polymer waveguide films using scanning angle Raman spectroscopy

There is an increasing demand for nondestructive in situ techniques that measure chemical content, total thickness, and interface locations for multilayer polymer films, and SA Raman spectroscopy in combination with appropriate data models can provide this information. A scanning angle (SA) Raman spectroscopy method was developed to measure the chemical composition of multilayer polymer waveguide films and to extract the location of buried interfaces between polymer layers with 7–80-nm axial spatial resolution. The SA Raman method measures Raman spectra as the incident angle of light upon a prism-coupled thin film is scanned. Six multilayer films consisting of poly(methyl methacrylate)/polystyrene or poly(methyl methacrylate)/polystyrene/poly(methyl methacrylate) were prepared with total thicknesses ranging from 330-1260 nm. The interface locations were varied by altering the individual layer thicknesses between 140-680 nm. The Raman amplitude ratio of the 1605 cm -1 peak for PS and 812 cm -1 peak for PMMA was used in calculations of the electric field intensity within the polymer layers to model the SA Raman data and extract the total thickness and interface locations. There is an average 8% and 7% difference in the measured thickness between the SA Raman and profilometry measurements for bilayer and trilayer films, respectively.

36 MATERIALS SCIENCE↗

A prediction of dislocation‐free CdTe/CdS photovoltaic multilayers via nano‐patterning and composition grading

Abstract Defects in multilayered films have long been a performance‐limiting problem for the semiconductor industry. For instance, CdTe/CdS solar cell efficiencies have had significant improvement in the past 15years or more without addressing the problem of high misfit dislocation densities. Overcoming this stagnation requires a fundamental understanding of interfacial defect formation. Herein, we demonstrate a new first principles‐based CdTe bond‐order approach that enables efficient molecular dynamics to approach the fidelity of density functional theory. Stringent quantum‐mechanical verification and experimental validation tests reveal that our new approach provides an accurate prediction of defects that earlier methods cannot. Using this new capability, we show that misfit dislocations in CdTe/CdS multilayers can be significantly reduced via nano‐patterning and composition grading and more importantly, dislocation‐free multilayers naturally arise when the pattern dimension is reduced below 90nm. Our predictive methods are generally applicable to other materials, highlighting a rational approach towards low‐defect semiconductor films. Copyright © 2015 John Wiley & Sons, Ltd.

Zhou, Xiao Wang↗

Ultrafast study of phonon transport in isotopically controlled semiconductor nanostructures: Phonons in isotopically controlled multilayers

Isotopically modulated silicon and germanium multilayers are analyzed by means of femtosecond spectroscopy and pulsed X-ray scattering for determining thermal conductivity and phonon modes. Isotopic modulation decreases thermal conductivity stronger than expected from a band bending model in the coherent phonon transport regime, in particular for silicon. Femtosecond spectroscopy and X-ray scattering resolve zone-folded vibration modes, which are located at the edge of the new, smaller Brillouin zone due to the multilayer periodicity. These modes can contribute to the reduction of thermal conductivity by Umklapp processes within the zone-folded mini-bands. Color-coded increase in ultrafast X-ray scattering in vicinity to the mini-zone boundary of a germanium multilayer.

36 MATERIALS SCIENCE↗

TiN‐Au/HfO 2 ‐Au Multilayer Thin Films with Tunable Hyperbolic Optical Response

Abstract Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self‐assembled HfO 2 ‐Au/TiN‐Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO 2 and TiN layers forming the alternative layers of HfO 2 ‐Au VAN and TiN‐Au VAN. The HfO 2 and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi‐layer thickness and the number of the bi‐layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three‐phase VAN design shows great potential for tailorable optical components in future integrated devices.

Chemistry↗

Endovascular Management of Complex Renal Artery Aneurysms Using the Multilayer Stent

Since its approval as an innovative stent system for peripheral aneurysm management in May 2009, the Cardiatis Multilayer Stent (Cardiatis, Isnes, Belgium) has been applied in several clinical cases. The unique design of this multilayer stent decreases mean velocity and vorticity within the aneurysm sac immediate and causes thrombus to form, resulting in physiological exclusion of the aneurysm from the circulation, whereas branches and collaterals sprouting from the aneurysm remain patent. Here we present a case of a complex renal artery aneurysm successfully treated with a 6 Multiplication-Sign 30-mm Cardiatis Multilayer Stent.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Endovascular Treatment of Multiple HIV-related Aneurysms Using Multilayer Stents

Complex peripheral aneurysm anatomy with major artery branches in the immediate vicinity and mycotic aneurysm often impede endovascular management using covered stent grafts. The Cardiatis Multilayer Stent (Cardiatis, Isnes, Belgium) is a recently approved innovative stent system for peripheral aneurysm management. Its multilayer design aims at decreasing mean velocity and vorticity within the aneurysm sac to cause thrombus formation while maintaining patency of branching vessels due to laminar flow. We present a case of bilateral subclavian artery aneurysms and perivisceral aortic aneurysms in an AIDS patient successfully treated with the Cardiatis Multilayer Stent at 18 months' follow-up.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Thermo-mechanical modeling and experimental validation for multilayered metallic microstructures

This paper presents thermo-mechanical modeling on multilayered metallic microstructures consisting of two bilayers that enable 3D deployment once being Joule heated. Additionally, a representative design of such microstructures, as well as their working principle is introduced. Furthermore, a mathematical model is derived using Euler–Bernoulli beam theory, and analytical solutions describing out-of-plane displacement of the multilayered microstructures when uniformly heated, which is validated by finite element analysis. Parametric analysis on thermal load and dimensional change of beam shows a good agreement between the analytical solutions and results given by finite element analysis. The phases of the near-equiatomic NiTi layer are analyzed by EDS and XRD, which prove to be austenite during the Joule heating process. The mechanical properties of austenite NiTi are incorporated into the analytical solutions that provides a good estimation of 3D deployment of microstructures made of NiTi and aluminum. The experimental results provide an approximately 7 µm out-of-plane deployment by applying a uniform temperature increase of 132 K, and parametric analysis on the dimension of top aluminum beam offers another promising approach to larger 3D deployment. The proposed mathematical model provides an efficient tool for predicting the out-of-plane deployment of such multilayered microstructures.

36 MATERIALS SCIENCE↗

Coupled Thermoelasticity Problem for Multilayer Composite Shells of Revolution. II. Applied Problems

We deduce a system of nonclassical nonlinear differential equations of coupled thermoelasticity for multilayer composite anisotropic shells of revolution in a coordinate system connected with the lines of curvature of the reference surface. The constructed nonclassical model of deformation of a multilayer shell and the nonlinear model of distribution of heat fluxes over the thickness of the shell enable us to take into account the transverse shear strains and guarantee the validity of the conditions of thermal and mechanical conjugation of the layers and the conditions of thermomechanical loading on the faces of the shell. We deduce the linearized differential equations of the axisymmetric coupled problem of thermoelasticity for a conic reinforced multilayer shell and solve the quasistatic problem of thermoelasticity for a two-layer cylindrical shell cross-reinforced in the direction of helical lines. By using the structural approach to the formulation of the criteria of strength for composite materials, we determine the loads of the onset of fracture of the binder and reinforcing elements of a two-layer metal-composite cylindrical shell.

42 ENGINEERING↗

High-performance multilayer WSe 2 field-effect transistors with carrier type control

In this paper, high-performance multilayer WSe 2 field-effect transistor (FET) devices with carrier type control are demonstrated via thickness modulation and a remote oxygen plasma surface treatment. Carrier type control in multilayer WSe 2 FET devices with Cr/Au contacts is initially demonstrated by modulating the WSe 2 thickness. The carrier type evolves with increasing WSe 2 channel thickness, being p-type, ambipolar, and n-type at thicknesses <3, ~4, and >5 nm, respectively. The thickness-dependent carrier type is attributed to changes in the bandgap of WSe 2 as a function of the thickness and the carrier band offsets relative to the metal contacts. Furthermore, we present a strong hole carrier doping effect via remote oxygen plasma treatment. It non-degenerately converts n-type characteristics into p-type and enhances field-effect hole mobility by three orders of magnitude. Finally, this work demonstrates progress towards the realization of high-performance multilayer WSe 2 FETs with carrier type control, potentially extendable to other transition metal dichalcogenides, for future electronic and optoelectronic applications.

36 MATERIALS SCIENCE↗

Multilayered triangular and quadrilateral flat shell elements based on the Refined Zigzag Theory

The paper presents a class of C 0 -continuous, flat shell elements based on the Refined Zigzag Theory (RZT) for the analysis of multilayered and curved composite and sandwich structures. In this study, the use of the interdependent interpolation strategy allows eliminating the shear-locking phenomenon and introducing the drilling rotation necessary to complete the set of classical nodal degrees of freedom (three displacements and three rotations). Additional kinematic variables are present in RZT, the zigzag rotations around the in-plane axes that measure the normal distortion typical of multilayered structures. An additional “drilling” zigzag rotation is therefore included among the nodal degrees of freedom in order to properly model curved and built-up structures. A stabilization procedure is adopted to suppress spurious zero-energy modes. A three-node triangular and a four-node quadrilateral flat shell element are formulated with 9 degrees of freedom per node. Example problems involving flat and curved multilayered structures are presented and discussed in order to assess the accuracy and convergence properties of the presented elements. Both static response predictions and free vibrations analyses are considered and the comparison is made with analytic RZT solutions, high-fidelity 3D finite element models and FSDT-based flat shell elements.

97 MATHEMATICS AND COMPUTING↗

Simple solutions of multilayered discs subjected to biaxial moment loading.

The purpose of this study was to derive a simple closed-form solution for the stress distribution through the thickness of multilayered discs subjected to biaxial moment loading, such that it can be used readily to evaluate the biaxial strength of multilayered dental ceramics using biaxial flexure tests. Methods A simple analytical model was developed to derive the stress distribution through the thickness of multilayered discs subjected to biaxial moment loading. The accuracy of the solution was verified by comparing with previous rigorous analytical solutions and finite element results. The results obtained from Roark's formulas for bilayered discs were also included for comparison.

36 MATERIALS SCIENCE↗