Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Characterization of Recrystallized Grains During Static Recrystallization of Hot-Compressed Mg–Zn–Ca Alloys Using In Situ Far-Field High-Energy Diffraction Microscopy

In this study, we explored the effect of Zn content on the static recrystallization of three 80 pct hot-compressed alloys, Mg–0.5Zn–0.1Ca wt pct (ZX050), Mg–1Zn–0.1Ca wt pct (ZX10), and Mg–3.2Zn–0.1Ca wt pct (ZX30), using far-field high-energy microscopy (ff-HEDM). Individual recrystallized grains were tracked and their 3D centroid, relative volume, and grain-averaged crystallographic orientation were measured during annealing. These measurements were used to compare the recrystallization kinetics and texture evolution of recrystallized grains in ZX alloys as a function of the Zn content. Fully recrystallized microstructures were observed for the ZX30 and the ZX10 alloys after annealing at 230 °C and 330 °C, respectively. In contrast, only a partially recrystallized microstructure for the ZX050 alloy was observed after > 1 hour of annealing at 430 °C. The resistance to recrystallization with decreasing Zn content was also confirmed by detecting faster growth rates of recrystallized grains in the ZX10 and ZX30 alloys, and slower growth rates in the ZX050 alloy. The significant recrystallization texture weakening of the ZX10 and ZX30 alloys and the development of a basal texture in the ZX05 alloy were described based on the orientation dependency of nucleation and growth of recrystallized grains. The analysis demonstrated that texture weakening was associated with increasing Zn content in Mg–Zn–Ca alloys.

Roumina, Reza [Univ. of Michigan, Ann Arbor, MI (U↗
DOE OSTI2021

Effect of excess Mg to control corrosion in molten MgCl 2 and KCl eutectic salt mixture

Structural alloys may experience corrosion when exposed to molten chloride salts due to selective dissolution of active alloying elements. One way to prevent this is to make the molten salt reducing. For the KCl + MgCl 2 eutectic salt mixture, pure Mg can be added to achieve this. However, Mg can form intermetallic compounds with nickel at high temperatures, which may cause alloy embrittlement. This work shows that an optimum level of excess Mg could be added to the molten salt which will prevent corrosion of alloys like 316 H, while not forming any detectable Ni-Mg intermetallic phases on Ni-rich alloy surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impacts of divalent cations (Mg 2+ and Ca 2+ ) on PFAS bioaccumulation in freshwater macroinvertebrates representing different foraging modes

Per- and polyfluoroalkyl substances (PFAS) have extensively contaminated freshwater aquatic ecosystems where they can be transported in water and partition to sediment and biota. In this paper, three freshwater benthic macroinvertebrates with different foraging modes were exposed to environmentally relevant concentrations of eight perfluoroalkyl carboxylates (PFCA), three perfluoroalkyl sulfonates (PFSA), and three fluorotelomer sulfonates (FTS) at varying divalent cation concentrations of magnesium (Mg 2+ ) and calcium (Ca 2+ ). Divalent cations can impact PFAS partitioning to solids, especially to sediments, at higher concentrations. Sediment dwelling worms (Lumbriculus variegatus), epibenthic grazing snails (Physella acuta), and sediment-dwelling filter-feeding bivalves (Elliptio complanata) were selected due to their unique foraging modes. Microcosms were composed of synthetic sediment, culture water, macroinvertebrates, and PFAS and consisted of a 28-day exposure period. L. variegatus had significantly higher PFAS bioaccumulation than P. acuta and E. complanata, likely due to higher levels of interactions with and ingestion of the contaminated sediment. “High Mg 2+ ” (7.5 mM Mg 2+ ) and “High Ca 2+ ” (7.5 mM Ca 2+ ) conditions generally had statistically higher bioaccumulation factors (BAF) than the “Reference Condition” (0.2 mM Ca 2+ and 0.2 mM Mg 2+ ) for PFAS with perfluorinated chain lengths greater than eight carbons. Long-chain PFAS dominated the PFAS profiles of the macroinvertebrates for all groups of compounds studied (PFCA, PFSA, and FTS). Furthermore, these results indicate that the study organism has the greatest impact on bioaccumulation, although divalent cation concentration had observable impacts between organisms depending on the environmental conditions. Elevated cation concentrations in the microcosms led to significantly greater bioaccumulation in the test organisms compared to the experimental reference conditions for long-chain PFAS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Investigating the failure behavior of cast Al-11Ce-0.4Mg alloys using in-situ scanning electron microscopy tensile testing

Within the last decade, research on Al-Ce-Mg alloys has reported promising results for use in cast part applications. In this paper, the failure behavior of cast Al-11Ce-0.4Mg (wt%) was investigated experimentally with focus on the effect the matrix and intermetallic phases have on the fracture propagation behavior at failure. For the first time, in-situ SEM tensile testing was used to study the failure behavior of cast Al-Ce alloys, reporting results for uniaxial, DIC, and single edge notch tensile tests. The results of the in-situ SEM tensile testing were compared with the materials characterization experiments, which included serial sectioning, EBSD, EDS, and fractography. Analysis of EBSD and EDS mapping of cast Al-11Ce-0.4Mg showed that the cast microstructure was a hypereutectic two phase Al-Ce alloy with grains encompassing large complex colonies of laminar eutectic Al 11 Ce 3 intermetallic. The uniaxial tensile results reported the effect casting defects have on the strength and ductility of the alloy, and DIC in-situ testing showed that the eutectic colonies plastically deform less than the matrix phase. In-situ SEM single edge notch tensile testing displayed how the strength of an individual phase affected the crack propagation direction in the alloy. The results of both the materials characterization and in-situ tensile testing experiments on the failure of this alloy revealed further directions for future alloy development that can improve both the strength and fracture toughness of Al-Ce-Mg alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ordering in liquid and its heredity impact on phase transformation of Mg-Al-Ca alloys

It is a long-sought goal to achieve desired mechanical properties through tailoring phase formation in alloys, especially for complicated multi-phase alloys. In fact, unveiling nucleation of competitive crystalline phases during solidification hinges on the nature of liquid. Here we employ ab initio molecular dynamics simulations (AIMD) to reveal liquid configuration of the Mg-Al-Ca alloys and explore its effect on the transformation of Ca-containing Laves phase from Al 2 Ca to Mg 2 Ca with increasing Ca/Al ratio (r Ca/Al ). There is structural similarity between liquid and crystalline phase in terms of the local arrangement environment, and the connection schemes of polyhedras. The forming signature of Mg 2 Ca, as hinted by the topological and chemical short-range order originating from liquid, ascends monotonically with increasing r Ca/Al . However, Al 2 Ca crystal-like order increase at first and then decrease at the crossover of r Ca/Al = 0.74, corresponding to experimental composition of phase transition from Al 2 Ca to Mg 2 Ca. The origin of phase transformation across different compositions lies in the dense packing of atomic configurations and preferential bonding of chemical species in both liquid and solid. The present finding provides a feasible scenario for manipulating phase formation to achieve high performance alloys by tailoring the crystal-like order in liquid.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Compromise between band structure and phonon scattering in efficient n-Mg 3 Sb 2-x Bi x thermoelectrics

n-type Mg 3 Sb 2 -based materials have become a top candidate for efficient thermoelectric applications within 300–700 K, due to its high band degeneracy, inherently high carrier mobility and low lattice thermal conductivity, as well as its advantages of less toxicity and abundance. Existing works showed that Mg 3 Bi 2 -alloying largely help ensure the exceptional performance, leaving a key issue to be uncovered on the primary mechanisms favoring or limiting the thermoelectric performance of Mg 3 Sb 2-x Bi x alloys. Furthermore we focus on the alloy composition dependent transport properties at various temperatures, with a large volume of experimental data. It is revealed that, with increasing x, the reduction in both inertial mass and lattice thermal conductivity is significantly beneficial, but the closure in band gap leads to a strong compensation due to the bipolar effect. Such a compromise between band structure and phonon scattering results in optimal Mg 3 Bi 2 -alloying concentrations to be about 50%–75% at 300 K, 50%–60% at 450 K and 50% at 600 K, which successfully guiding this work to realize extraordinary thermoelectric figure of merit at these temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Increasing Capacity in Disordered Rocksalt Cathodes by Mg Doping

Using both computations and experiments, we demonstrate that the performance of Li-excess cation-disordered rocksalt cathodes can be improved by Mg substitution. Furthermore we find that Mg reduces the amount of Li in the compound that is strongly bound to F and thereby increases the capacity. This enables the use of fluorination as a tool to improve stability of the compounds without significant loss of capacity. Mg emerged as the most optimal substitution element from a systematic computational study aimed at identifying inactive doping elements with a strong enough bonding strength to fluorine to displace Li from the F environments. Our results also show that capacity can be traded for cycle life depending on whether Mg is substituted for Li or for the redox metal. This design strategy should be considered in fluorinated cathodes, which will facilitate the design of optimized disordered rocksalt oxyfluoride cathodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Role of Short-Range Order on Diffusion Coefficients in the Li–Mg Alloy

Li–Mg alloys are important because of their beneficial role in fostering uniform plating and stripping of lithium in all-solid-state batteries. The alloy Li x Mg 1–x forms a solid solution on the BCC crystal structure when the lithium content is greater than x ≈ 0.3. The activation barriers of lithium and magnesium exchanges with a vacancy, crucial for substitutional diffusion, are predicted to be exceptionally low and almost identical, with negligible dependence on the alloy composition. The equilibrium vacancy concentration at room temperature is predicted to be very low, and it also remains almost constant with no dependence on Mg content in the alloy (for x Li ≥ 0.5). Nevertheless, both experiments and kinetic Monte Carlo simulations indicate that the tracer diffusion coefficients decrease by almost an order of magnitude with the addition of Mg to the alloy. In this contribution, the crucial role that chemical short-range order plays in affecting the diffusion coefficients is studied. Chemical short-range order is found to increase the effective activation barrier for lithium and magnesium diffusion by making successive atomic hops with vacancies correlated.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamics of Metal Carbonates and Bicarbonates and Their Hydrates for Mg, Ca, Fe, and Cd Relevant to Mineral Energetics

The heats of formation of carbonate, bicarbonate and bicarbonate/hydroxide metal complexes and hydrated versions these complexes of Mg 2+ , Ca 2+ , Fe 2+ , and Cd 2+ are predicted from atomization energies using correlated molecular orbital theory at the CCSD(T) level extrapolated to the complete basis set limit following the Feller-Peterson-Dixon (FPD) approach. Using the calculated gas phase values and the available experimental solid state values, the cohesive energies of selected minerals were calculated. The gas phase decomposition energies into MO, CO 2 and H 2 O follow the order Mg ~ Ca > Cd ~ Fe, and correlate with the hardness of the metal +2 ions. Gas phase hydration energies show that the order is Mg > Fe > Ca ~ Cd. There are a number of bulk hydrated Mg and Ca complexes that occur as minerals but there are few if any for Fe and Cd, suggesting that a number of factors are important in determining the stability of the bulk mineral hydrates. The FPD heats of formation were used to benchmark a range of density functional theory exchange-correlation functionals, including those commonly used in solid state mineral calculations. None of the functionals provided chemical accuracy agreement (± 1 kcal/mol) with the FPD results The best functionals are ωB97X and ωB97X-D with mean average unsigned errors of 10 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Al2O3 Atomic Layer Deposition on Nanostructured γ-Mg(BH4)2 for H2 Storage

In the context of the growing hydrogen (H 2 ) economy, the demand for H 2 storage materials is high, and metal borohydrides are of particular interest. Magnesium borohydride, Mg(BH 4 ) 2 , has one of the highest hydrogen capacities of all known metal hydrides (14.9 wt % H) but suffers from high operating temperatures, slow kinetics for (de)hydrogenation, and the loss of capacity upon cycling. Strategies to address these challenges include nanoencapsulation and the use of chemical additives. This work is the first to utilize these two strategies simultaneously by using atomic layer deposition (ALD). For this new approach to modify borohydrides, we chose the well-studied Al 2 O 3 ALD process using trimethylaluminum and water. Although there has been limited use of aluminum-based additives for Mg(BH 4 ) 2 , we demonstrate that the low-temperature H 2 capacity was doubled, desorption kinetics were increased by a factor of 3, and 100 cycles of Al 2 O 3 suppressed the release of diborane compared to the uncoated Mg(BH4)2. We identified that the use of trimethylaluminum and water in the ALD process affected the decomposition pathway and that the Al 2 O 3 film growth is dominated by infiltration due to the high porosity of the ..gamma..-phase Mg(BH 4 ) 2 . From these results, the potential of ALD as a method to functionalize solid-state H 2 storage materials is inferred, and recommendations for future ALD processes are presented.

08 HYDROGEN↗
DOE OSTI2025

Chemical Redox Agent-Driven Noncorrosive Formation of Nanoporous Mg Structures for Advanced Hydrogen Storage

Light metal-based nanomaterials are widely used for energy storage due to their high energy density and surface-to-volume ratio. However, their high reactivity is paradoxically both the source of advantageous properties and a hurdle to the fabrication of stable nanostructures. Here, in this study, we demonstrate the formation of nanoporous Mg via chemical redox agent-driven dealloying, which ensures minimized surface passivation and results in fine nanostructures with <50 nm of interconnected metallic ligament despite the labile chemical properties of Mg. The thin passivation layer protects the metallic ligaments from severe coarsening by suppressing surface diffusion. The hydrogen storage performance of nanoporous Mg is investigated as an exemplar for energy applications, and the hydrogen ab/desorption kinetics is substantially enhanced compared to other nano-Mg with similar dimensions. Mesoscale simulations highlight the significance of the bicontinuous structure compared to the particle-like counterpart. This work offers valuable insights into the unexplored realm of reactive metal-based nanoporous structures, highlighting their potential for sustainable energy storage and carrier media.

08 HYDROGEN↗
DOE OSTI2023

Probing pH-Dependent Dehydration Dynamics of Mg and Ca Cations in Aqueous Solutions with Multi-Level Quantum Mechanics/Molecular Dynamics Simulations

The dehydration of aqueous calcium and magnesium cations is the most fundamental process controlling their reactivity in chemical and biological phenomena, such as the formation of ionic solids or passing through ion channels. It holds particular relevance in light of recent advancements in the development of carbon capture techniques that rely on mineralization for long-term carbon storage. Specifically, dehydration of Ca 2+ and Mg 2+ is a key step in proposed carbon capture processes aiming to exploit the relatively high concentration of dissolved carbon dioxide in seawater via the formation of carbonate minerals from solvated Ca 2+ and Mg 2+ cations for sequestration and storage. Nevertheless, atomic-scale understanding of the dehydration of aqueous Ca 2+ and Mg 2+ cations remains limited. Here, we utilize rare event sampling via density functional theory molecular dynamics and embedded wavefunction theory calculations to elucidate the dehydration dynamics of aqueous Ca 2+ and Mg 2+ . Emphasis is placed on the investigation of the effect pH has on the stability of the different coordination environments. Here, our results reveal significant differences in the dehydration dynamics of the two cations and provide insight into how they may be modulated by pH changes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Femtosecond X-ray Diffraction of Laser-shocked Forsterite (Mg 2 SiO 4 ) to 122 GPa

The response of forsterite, Mg 2 SiO 4 , under dynamic compression is of fundamental importance for understanding its phase transformations and high-pressure behavior. Here, we have carried out an in situ X-ray diffraction study of laser-shocked polycrystalline and single-crystal forsterite from 19 to 122 GPa using the Matter in Extreme Conditions end-station of the Linac Coherent Light Source. Under laser-based shock loading, forsterite does not transform to the high-pressure equilibrium assemblage of MgSiO 3 bridgmanite and MgO periclase, as has been suggested previously. Instead, we observe forsterite and forsterite III, a metastable polymorph of Mg 2 SiO 4 , coexisting in a mixed-phase region from 33 to 75 GPa for both polycrystalline and single-crystal samples. Densities inferred from X-ray diffraction are consistent with earlier gas-gun shock data. At higher stress, the response is sample-dependent. Polycrystalline samples undergo amorphization above 79 GPa. For [010]- and [001]-oriented crystals, a mixture of crystalline and amorphous material is observed to 108 GPa, whereas the [100]-oriented forsterite adopts an unknown phase at 122 GPa. The first two sharp diffraction peaks of amorphous Mg 2 SiO 4 show a similar trend with compression as those observed for MgSiO 3 in both recent static- and laser-driven shock experiments. This study provides new insight into the transformation of forsterite under nanosecond-duration shock loading. This work emphasizes the importance of formation of metastable phases along the Hugoniot and adds to evidence that the 300-K single-crystal diamond anvil cell experiments have relevance for understanding structures formed under shock compression. In particular, the metastable phase forsterite III has now been shown to form under dynamic compression from 10s to 100s of nanoseconds as well as under 300-K static compression. Upon compression to higher pressures, Mg 2 SiO 4 transforms to an amorphous phase. These results have broad relevance for understanding the behavior of silicates under dynamic compression.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High-power Mg batteries enabled by heterogeneous enolization redox chemistry and weakly coordinating electrolytes

Magnesium batteries have long been pursued as potentially low-cost, high-energy and safe alternatives to Li-ion batteries. However, Mg 2+ interacts strongly with electrolyte solutions and cathode materials, leading to sluggish ion dissociation and diffusion, and consequently low power output. Here we report a heterogeneous enolization chemistry involving carbonyl reduction (C=O ↔ C–O-), which bypasses the dissociation and diffusion difficulties, enabling fast and reversible redox processes. This kinetically favoured cathode is coupled with a tailored, weakly coordinating boron cluster-based electrolyte that allows for dendrite-free Mg plating/stripping at a current density of 20 mA cm -2 . The combination affords a Mg battery that delivers a specific power of up to 30.4 kW kg -1 , nearly two orders of magnitude higher than that of state-of-the-art Mg batteries. Here, the cathode and electrolyte chemistries elucidated here propel the development of magnesium batteries and would accelerate the adoption of this low-cost and safe battery technology.

25 ENERGY STORAGE↗
DOE OSTI2022

Evaluating solvothermal and mechanochemical routes towards the metal–organic framework Mg 2 ( m -dobdc)

Metal–organic frameworks bearing coordinatively unsaturated Mg(II) sites are promising materials for gas storage, chemical separations, and drug delivery due to their low molecular weights and lack of toxicity. Furthermore, there remains a limited number of such MOFs reported in the literature. Herein, we investigate the gas sorption properties of the understudied framework Mg 2 (m-dobdc) (dobdc 4– = 4,6-dioxido-1,3-benzenedicarboxylate) synthesized under both solvothermal and mechanochemical conditions. Both materials are found to be permanently porous, as confirmed by 77 K N 2 adsorption measurements. In particular, Mg 2 (m-dobdc) synthesized under mechanochemical conditions using exogenous organic base displays one of the highest capacities reported to date (6.14 mmol g –1 ) for CO 2 capture in a porous solid under simulated coal flue gas conditions (150 mbar, 40 °C). As such, mechanochemically synthesized Mg 2 (m-dobdc) represents a promising new framework for applications requiring high gas adsorption capacities in a porous solid.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unusual products arising from the tandem dehydrogenation of Mg(BH 4 ) 2 and pyrrolidine

The dehydrogenation of Mg(BH 4 ) 2 in the presence of O-Lewis base donors has been widely explored but there have been very few studies of dehydrogenation of the borohydride in the presence of N-Lewis bases. Mg(BH 4 ) 2 has been found to react with pyrrolidine at room temperature to form BH 3 -pyrrolidine adduct. Upon heating, further dehydrogenation reactions occur to form bis(pyrrolidino)borane, tris(pyrrolidino)borane and other B–N intermediates. Reacting Mg(BH 4 ) 2 and pyrrolidine in a 1 : 6 molar ratio exclusively yields tris(pyrrolidino)borane which is in accordance with predicted stoichiometric factors. The formation of these products contrasts with the routine production of higher boranes and/or intractable polymers from the dehydrogenation of Mg(BH 4 ) 2 in the presence O-Lewis bases. The amount of H 2 released in these reactions was determined both by the Parr autoclave pressure readings and the eudiometer measurements. Both measurements align with the values predicted by the stoichiometric factors associated by the proposed pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Twin density and twin thickness evolution in sputtered Al–Mg alloys

Twinned Al–Mg alloys have been reported. However, the role of Mg solute in facilitating the formation of growth twins remains unclear. By using a precession-assisted crystal orientation mapping technique (PACOM) coupled with transmission electron microscopy (known as ASTAR), we examined the evolution of twin boundaries in Al, Al–1Mg, and Al–2.2Mg (at. %) films. The twinned grain fraction elevates with increasing film thickness until it reaches a peak when the film thickness is 120–160 nm. The Al–Mg alloys exhibited greater twinned grain fractions than pure Al. To investigate the fluctuation of twinned grain fraction, two types of twin boundaries were classified including intergranular and intragranular twins. The initial increase in twin density is attributed to the impingement of twinned grains during island coalescence and the twinned grains are more likely to survive during the grain growth process. Whereas the decrease in twinned grain fraction in thicker films is related to the removal of intragranular twins, and a lack of formation mechanisms of new twins.

Physics↗
DOE OSTI2023

Defect-mediated diffusion of implanted Mg in GaN: Suppressing dopant redistribution by sequential thermal and microwave annealing

The diffusion behavior of Mg in Mg/N co-implanted GaN is investigated in response to a set of annealing conditions and methodologies, namely, 1000 °C/30 min thermal anneal, by high-temperature pulsed gyrotron microwave annealing at 1420 or 1500 °C, or by thermal and microwave annealing, sequentially. After 1000 °C annealing, the diffusion of Mg in GaN is found to be negligible, as measured by secondary ion mass spectrometry. Annealing by gyrotron microwave annealing alone induces the diffusion of Mg at a rate on the order of 10 −12 cm 2 /s. However, the use of a thermal anneal before microwave gyrotron annealing reduces this rate by an order of magnitude to 10 −13 cm 2 /s. We find that a model that considers Mg diffusion from an inhomogeneous medium that contains a defect-rich implanted region near-surface to a relatively pristine region below the implant range better explains the observed diffusion behavior than a conventional model that assumes a homogeneous medium. By analyzing the diffusion behavior using the Boltzmann–Matano method, we present a discussion of reduction in [V Ga ] by thermal annealing at 1000 °C, leading to a suppressed diffusion coefficient during subsequent high-temperature annealing relative to diffusion after 1420/1500 °C annealing alone. This effect holds potential for improvement in the precision of selectively doped regions for future applications based on the (Al)GaN material system. An improved field profile control in real devices can increase the breakdown and current-handling capabilities in power electronic applications.

Meyers, V.↗