Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

The metal to metal interface and its effect on adhesion and friction

The nature of the interface, adhesion and friction properties of noble metals, platinum metals, Group IV (B) metals and transition metals were considered. The surface chemical activity of the noble and platinum metals is shown to effect metal to metal interfaces as does a valance bonding in the transition metals. With the Group IV (B) metals the degree of metallic nature of the elements is shown to effect interfacial behavior. The effect of surface segregation of alloy constituents such as silicon in iron and its influence on the metal to metal interface is discussed. In addition the effect of alloy constituents on changes in bulk properties such as transformations in tin are shown to effect interfacial adhesion and friction behavior.

Buckley, D. H.↗

The Effect of Metal Composition on Fe-Ni Partition Behavior between Olivine and FeNi-Metal, FeNi-Carbide, FeNi-Sulfide at Elevated Pressure

Metal-olivine Fe-Ni exchange distribution coefficients were determined at 1500 C over the pressure range of 1 to 9 GPa for solid and liquid alloy compositions. The metal alloy composition was varied with respect to the Fe/Ni ratio and the amount of dissolved carbon and sulfur. The Fe/Ni ratio of the metal phase exercises an important control on the abundance of Ni in the olivine. The Ni abundance in the olivine decreases as the Fe/Ni ratio of the coexisting metal increases. The presence of carbon (up to approx. 3.5 wt.%) and sulfur (up to approx. 7.5 wt.%) in solution in the liquid Fe-Ni-metal phase has a minor effect on the partitioning of Fe and Ni between metal and olivine phases. No pressure dependence of the Fe-Ni-metal-olivine exchange behavior in carbon- and sulfur-free and carbon- and sulfur-containing systems was found within the investigated pressure range. To match the Ni abundance in terrestrial mantle olivine, assuming an equilibrium metal-olivine distribution, a sub-chondritic Fe/Ni-metal ratio that is a factor of 17 to 27 lower than the Fe/Ni ratios in estimated Earth core compositions would be required, implying higher Fe concentrations in the core forming metal phase. A simple metal-olivine equilibrium distribution does not seem to be feasible to explain the Ni abundances in the Earth's mantle. An equilibrium between metal and olivine does not exercise a control on the problem of Ni overabundance in the Earth's mantle. The experimental results do not contradict the presence of a magma ocean at the time of terrestrial core formation, if olivine was present in only minor amounts at the time of metal segregation.

Holzheid, Astrid↗

Investigation of metal hydride nanoparticles templated in metal organic frameworks.

Hydrogen is proposed as an ideal carrier for storage, transport, and conversion of energy. However, its storage is a key problem in the development of hydrogen economy. Metal hydrides hold promise in effectively storing hydrogen. For this reason, metal hydrides have been the focus of intensive research. The chemical bonds in light metal hydrides are predominantly covalent, polar covalent or ionic. These bonds are often strong, resulting in high thermodynamic stability and low equilibrium hydrogen pressures. In addition, the directionality of the covalent/ionic bonds in these systems leads to large activation barriers for atomic motion, resulting in slow hydrogen sorption kinetics and limited reversibility. One method for enhancing reaction kinetics is to reduce the size of the metal hydrides to nano scale. This method exploits the short diffusion distances and constrained environment that exist in nanoscale hydride materials. In order to reduce the particle size of metal hydrides, mechanical ball milling is widely used. However, microscopic mechanisms responsible for the changes in kinetics resulting from ball milling are still being investigated. The objective of this work is to use metal organic frameworks (MOFs) as templates for the synthesis of nano-scale NaAlH4 particles, to measure the H2 desorption kinetics and thermodynamics, and to determine quantitative differences from corresponding bulk properties. Metal-organic frameworks (MOFs) offer an attractive alternative to traditional scaffolds because their ordered crystalline lattice provides a highly controlled and understandable environment. The present work demonstrates that MOFs are stable hosts for metal hydrides and their reactive precursors and that they can be used as templates to form metal hydride nanoclusters on the scale of their pores (1-2 nm). We find that using the MOF HKUST-1 as template, NaAlH4 nanoclusters as small as 8 formula units can be synthesized inside the pores. A detailed picture of the hydrogen desorption is investigated using a simultaneous thermogravimetric modulated-beam mass spectrometry instrument. The hydrogen desorption behavior of NaAlH4 nano-clusters is found to be very different from bulk NaAlH4. The bulk NaAlH4 desorbs about 70 wt% hydrogen {approx}250 C. In contrast, confinement of NaAlH4 within the MOF pores dramatically increases the rate of H2 desorption at lower temperatures. About {approx}80% of the total H2 desorbed from MOF-confined NaAlH4 is observed between 70 to 155 C. In addition to HKUST-1, we find that other MOFs (e.g. MIL-68 and MOF-5) can be infiltrated with hydrides (LiAlH4, LiBH4) or hydride precursors (Mg(C4H9)2 and LiC2H5) without degradation. By varying pore dimensions, metal centers, and the linkers of MOFs, it will be possible to determine whether the destabilization of metal hydrides is dictated only by the size of the metal hydride clusters, their local environment in a confined space, or by catalytic effects of the framework.

08 HYDROGEN↗

Cooperative H 2 Activation across a Metal–Metal Multiple Bond and Hydrogenation Reactions Catalyzed by a Zr/Co Heterobimetallic Complex

In the quest for active and selective catalysts featuring nonprecious metals, bimetallic cooperativity poses a unique opportunity to promote catalytic reactions and influence selectivity. While examples of stoichiometric H 2 activation across metal–metal bonds have been reported, there have been limited advances toward the incorporation of a well-defined cooperative bimetallic H 2 activation process into a catalytic cycle for the hydrogenation of unsaturated hydrocarbons. We demonstrate that facile activation of H 2 by two nonprecious metals is facilitated by metal–metal cooperativity in the coordinatively unsaturated Zr/Co bis(phosphinoamide) complexes (THF)(I)Zr(XylNP i Pr 2 ) 2 CoPR 3 (3-PMe 3 and 3-PMePh 2 , Xyl =3,5-dimethylphenyl), which feature highly polar Zr–Co triple bonds. Owing to the stabilizing nature of the metal–metal bond, the H 2 activation products (THF)(I)Zr(μ-H)(XylNP i Pr 2 ) 2 Co(H)(PR 3 ) (4-PMe 3 and 4-PMePh 2 ), which feature one terminally bound Co hydride and one hydride bridging the two metals, have been isolated and crystallographically characterized. The Zr/Co bimetallic complex 3-PMePh 2 is an active catalyst for the hydrogenation of alkenes and semihydrogenation of alkynes, and relevant intermediates including 4-PMePh 2 and alkene (5) and alkyne (6) adducts have been identified spectroscopically in situ and isolated and characterized through independent synthesis. The alkyne semihydrogenation reaction catalyzed by 3-PMePh 2 exhibits high selectivity for alkene over alkane products and generates an unselective distribution of (E)- and (Z)-alkenes via direct formation of both stereoisomers. These findings lend insight into the roles that metal–metal bonding and cooperativity play in the activation of small molecules and the promotion and selectivity of subsequent catalytic transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Protected Lithium-Metal Anodes in Batteries: From Liquid to Solid

High-energy lithium-metal batteries are among the most promising candidates for next-generation energy storage systems. With a high specific capacity and a low reduction potential, the Li-metal anode has attracted extensive interest for decades. Dendritic Li formation, uncontrolled interfacial reactions, and huge volume effect are major hurdles to the commercial application of Li-metal anodes. Recent studies have shown that the performance and safety of Li-metal anodes can be significantly improved via organic electrolyte modification, Li-metal interface protection, Li-electrode framework design, separator coating, and so on. Superior to the liquid electrolytes, solid-state electrolytes are considered able to inhibit problematic Li dendrites and build safe solid Li-metal batteries. Inspired by the bright prospects of solid Li-metal batteries, increasing efforts have been devoted to overcoming the obstacles of solid Li-metal batteries, such as low ionic conductivity of the electrolyte and Li–electrolyte interfacial problems. In this paper, the approaches to protect Li-metal anodes from liquid batteries to solid-state batteries are outlined and analyzed in detail. Finally, perspectives regarding the strategies for developing Li-metal anodes are discussed to facilitate the practical application of Li-metal batteries.

25 ENERGY STORAGE↗

Influence of aluminum incorporation and aqueous conditions on metal ion release of high-Ni transition metal oxide nanomaterials

Developing a materials perspective of how to control the degradation and negative impact of complex metal oxides requires an integrated understanding of how these nanomaterials transform in the environment and interact with biological systems. Doping with aluminum is known to stabilize oxide materials, but has not been assessed cohesively from synthesis to environmental fate and biological impact. In the present study, the influence of aluminum doping on metal ion release from transition metal oxides was investigated by comparing aqueous transformations of lithium nickel cobalt aluminum oxide (LiNi 0.82 Co 0.15 Al 0.03 O 2 ; NCA) and lithium nickel cobalt oxide (LiNi 0.80 Co 0.20 O 2 ; NC) nanoparticles and by calculating the energetics of metal release using a density functional theory (DFT) and thermodynamics method. Two model environmental organisms were used to assess biological impact, and metal ion release was compared for NCA and NC nanoparticles incubated in their respective growth media: moderately hard reconstituted water (MHRW) for the freshwater invertebrate Daphnia magna (D. magna) and minimal growth medium for the Gram-negative bacterium Shewanella oneidensis MR-1 (S. oneidensis). Further, the amount of metal ions released was reduced for NCA compared to NC in MHRW, which correlated to changes in the modeled energetics of release upon Al substitution in the lattice. In minimal medium, metal ion release was approximately an order of magnitude higher compared to MHRW and was similar to the stoichiometry of the bulk nanoparticles for both NCA and NC. Interpretation of the release profiles and modeling indicated that the increase in total metal ion release and the reduced influence of Al doping arises from lactate complexation of metal ions in solution. The relative biological impacts of NC and NCA exposure for both S. oneidensis and D. magna were consistent with the metal release trends observed for minimal medium and MHRW, respectively. Together, these results demonstrate how a combined experimental and computational approach provides valuable insight into the aqueous transformations and biological impacts of complex metal oxide nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An analytical model for galaxy metallicity: What do metallicity relations tell us about star formation and outflow?

We develop a simple analytical model that tracks galactic metallicities governed by star formation and feedback to gain insight from the observed galaxy stellar mass–metallicity relations over a large range of stellar masses and redshifts. The model reveals the following implications of star formation and feedback processes in galaxy formation. First, the observed metallicity relations provide a stringent upper limit for the averaged outflow mass-loading factors of local galaxies, which are ∼20 for M{sub ∗}∼10{sup 9} M{sub ⊙} galaxies and monotonically decrease to ∼1 for M{sub ∗}∼10{sup 11} M{sub ⊙} galaxies. Second, the inferred upper limit for the outflow mass-loading factor sensitively depends on whether the outflow is metal-enriched with respect to the interstellar medium metallicity. If half of the metals ejected from supernovae leave the galaxy in metal-enriched winds, the outflow mass-loading factor for galaxies at any mass can barely be higher than ∼10, which puts strong constraints on galaxy formation models. Third, the relatively lower stellar-phase to gas-phase metallicity ratio for lower-mass galaxies indicates that low-mass galaxies are still rapidly enriching their metallicities in recent times, while high-mass galaxies are more settled, which seems to show a downsizing effect in the metallicity evolution of galaxies. The analysis presented in the paper demonstrates the importance of accurate measurements of galaxy metallicities and the cold gas fraction of galaxies at different redshifts for constraining star formation and feedback processes, and demonstrates the power of these relations for constraining the physics of galaxy formation.

79 ASTRONOMY AND ASTROPHYSICS↗

METAL-RICH M-DWARF PLANET HOSTS: METALLICITIES WITH K-BAND SPECTRA

A metal-rich environment facilitates planet formation, making metal-rich stars the most favorable targets for surveys seeking to detect new exoplanets. Using this advantage to identify likely low-mass planet hosts, however, has been difficult: until now methods to determine M-dwarf metallicities required observationally expensive data (such as parallaxes and high-resolution spectra) and were limited to a few bright cool stars. We have obtained moderate (R {approx} 2700) resolution K-band spectra of 17 M dwarfs with metallicity estimates derived from their FGK companions. Analysis of these spectra, and inspection of theoretical synthetic spectra, reveals that an M dwarf's metallicity can be inferred from the strength of its Na I doublet (2.206 {mu}m and 2.209 {mu}m) and Ca I triplet (2.261 {mu}m, 2.263 {mu}m, and 2.265 {mu}m) absorption lines. We use these features, and a temperature-sensitive water index, to construct an empirical metallicity indicator applicable for M dwarfs with near-solar metallicities (-0.5< [Fe/H] < +0.5). This indicator has an accuracy of {+-}0.15 dex, comparable to that of existing techniques for estimating M-dwarf metallicities, but is more observationally accessible, requiring only a moderate resolution K-band spectrum. Applying this method to eight known M-dwarf planet hosts, we estimate metallicities ([Fe/H]) in excess of the mean metallicity of M dwarfs in the solar neighborhood, consistent with the metallicity distribution of FGK planet hosts.

79 ASTRONOMY AND ASTROPHYSICS↗

Quantifying metal-binding specificity of Cc NikZ-II from Clostridium carboxidivorans in the presence of competing metal ions

Many proteins bind transition metal ions as cofactors to carry out their biological functions. Despite binding affinities for divalent transition metal ions being predominantly dictated by the Irving-Williams series for wild-type proteins, in vivo metal ion binding specificity is ensured by intracellular mechanisms that regulate free metal ion concentrations. However, a growing area of biotechnology research considers the use of metal-binding proteins in vitro to purify specific metal ions from wastewater, where specificity is dictated by the protein's metal binding affinities. A goal of metalloprotein engineering is to modulate these affinities to improve a protein's specificity towards a particular metal; however, the quantitative relationship between the affinities and the equilibrium metal-bound protein fractions depends on the underlying binding mechanisms. Here we demonstrate a high-throughput intrinsic tryptophan fluorescence quenching method to validate binding models in multi-metal solutions for CcNikZ-II, a nickel-binding protein from Clostridium carboxidivorans. Using our validated models, we quantify the relationship between binding affinity and specificity in different classes of metal-binding models for CcNikZ-II. In conclusion, we further illustrate the potential relevance of data-informed models to predicting engineering targets for improved specificity.

59 BASIC BIOLOGICAL SCIENCES↗

Toxicological responses of environmental mixtures: Environmental metal mixtures display synergistic induction of metal-responsive and oxidative stress genes in placental cells

Exposure to elevated levels of the toxic metals inorganic arsenic (iAs) and cadmium (Cd) represents a major global health problem. These metals often occur as mixtures in the environment, creating the potential for interactive or synergistic biological effects different from those observed in single exposure conditions. In the present study, environmental mixtures collected from two waste sites in China and comparable mixtures prepared in the laboratory were tested for toxicogenomic response in placental JEG-3 cells. These cells serve as a model for evaluating cellular responses to exposures during pregnancy. One of the mixtures was predominated by iAs and one by Cd. Six gene biomarkers were measured in order to evaluate the effects from the metal mixtures using dose and time-course experiments including: heme oxygenase 1 (HO-1) and metallothionein isoforms (MT1A, MT1F and MT1G) previously shown to be preferentially induced by exposure to either iAs or Cd, and metal transporter genes aquaporin-9 (AQP9) and ATPase, Cu{sup 2+} transporting, beta polypeptide (ATP7B). There was a significant increase in the mRNA expression levels of ATP7B, HO-1, MT1A, MT1F, and MT1G in mixture-treated cells compared to the iAs or Cd only-treated cells. Notably, the genomic responses were observed at concentrations significantly lower than levels found at the environmental collection sites. These data demonstrate that metal mixtures increase the expression of gene biomarkers in placental JEG-3 cells in a synergistic manner. Taken together, the data suggest that toxic metals that co-occur may induce detrimental health effects that are currently underestimated when analyzed as single metals. - Highlights: • Toxicogenomic responses of environmental metal mixtures assessed • Induction of ATP7B, HO-1, MT1A, MT1F and MT1G by metal mixtures observed in placental cells • Higher gene induction in response to metal mixtures versus single metal treatments.

60 APPLIED LIFE SCIENCES↗

Single-crystal-to-single-crystal metalation of a metal-organic framework: A route toward structurally well-defined catalysts

Metal–organic frameworks featuring ligands with open chelating groups are versatile platforms for the preparation of a diverse set of heterogeneous catalysts through postsynthetic metalation. The crystalline nature of these materials allows them to be characterized via X-ray diffraction, which provides valuable insight into the structure of the metal sites that facilitate catalysis. A highly porous and thermally robust zirconium-based metal–organic framework, Zr 6 O 4 (OH) 4 (bpydc) 6 (bpydc 2– = 2,2'-bipyridne-5,5'-dicarboxylate), bears open bipyridine sites that readily react with a variety of solution- and gas-phase metal sources to form the corresponding metalated frameworks. Remarkably, Zr 6 O 4 (OH) 4 (bpydc) 6 undergoes a single-crystal-to-single-crystal transformation upon metalation that involves a change in space group from $Fm\bar{3}m$ to $Pa\bar{3}m$. This structural transformation leads to an ordering of the metalated linkers within the framework, allowing structural characterization of the resulting metal complexes. Furthermore, Zr 6 O 4 (OH) 4 (bpydc) 6 yields an active heterogeneous catalyst for arene C–H borylation when metalated with [Ir(COD) 2 ]BF 4 (COD = 1,5-cyclooctadiene). These results highlight the unique potential of metal–organic frameworks as a class of heterogeneous catalysts that allow unparalleled structural characterization and control over their active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photometric metallicity for 694 233 Galactic giant stars from Gaia DR3 synthetic Strömgren photometry: Metallicity distribution functions of halo substructures

We used two previous calibrations and the standardised synthetic photometry in the v, b, and y Strömgren passbands from Gaia DR3 BP/RP spectra to obtain photometric metallicities for a selected sample of 694 233 old Galactic giant stars having |b|> 20.0° and parallax uncertainties lower than 10%. The zero point of both sets of photometric metallicities has been shifted to ensure an optimal match with the spectroscopic [Fe/H] values for 44 785 stars in common with APOGEE DR17, focusing on the metallicity range where they provide the highest accuracy. The metallicities derived in this way from one calibration display a typical accuracy of ≲0.1 dex and 1σ precision ≲0.2 dex in the range -2.2 ≲ [Fe/H] ≲ - 0.4, while they show a systematic trend with [Fe/H] at higher metallicity, beyond the applicability range of the relation. Those derived from the other calibration display, in general, reduced precision, and lower accuracy in the metal-poor regime, but have a median accuracy < 0.05 dex for [Fe/H] ≥ - 0.8. These results are confirmed and, consequently, the metallicities are validated, by comparison with large sets of spectroscopic metallicities from various surveys. The newly obtained metallicities are used to derive metallicity distributions for several previously identified substructures in the Galactic halo with an unprecedented number of stars. The catalogue including the two sets of metallicities and the associated uncertainties is made publicly available.

79 ASTRONOMY AND ASTROPHYSICS↗

Metal foils with ordered crystal structure and method for producing metal foils

A method for producing a metal foil comprising depositing metal onto an oxidizable substrate to form a metal film on the substrate; oxidizing the substrate at an interface between the metal film and the substrate; and removing the metal film from the substrate to yield a metal foil. A method for forming a thin metal film comprising pre-polarizing a single-crystal Si substrate by application of a potential which is negative of a potential at which Si oxidizes, which pre-polarization occurs in the presence of metal ions to form metal growth nucleation sites on the substrate, followed by application of a potential at which both oxidation of Si and electrodeposition of the metal occur to grow the metal film and oxidize the Si to SiOx, which potential is more positive than the potential applied in the pre-polarization step.

Switzer, Jay A.↗

Vapor phase hydrogenation of furfural over nickel mixed metal oxide catalysts derived from layered double hydroxides

The hydrogenation of furfural is investigated over various reduced nickel mixed metal oxides derived from layered double hydroxides (LDHs) containing Ni-Mg-Al and Ni-Co-Al. Upon reduction, relatively large Ni(0) domains develop in the Ni-Mg-Al catalysts, whereas in the Ni-Co-Al catalysts smaller metal particles of Ni(0) and Co(0), potentially as alloys, are formed, as evidenced by XAS, XPS, STEM and EELS. All the reduced Ni catalysts display similar selectivities towards major hydrogenation products (furfuryl alcohol and tetrahydrofurfuryl alcohol), though the side products varied with the catalyst composition. The 1.1Ni-0.8Co-Al catalyst showed the greatest activity per titrated site when compared to the other catalysts, with promising activity compared to related catalysts in the literature. The use of base metal catalysts for hydrogenation of furanic compounds may be a promising alternative to the well-studied precious metal catalysts for making biomass-derived chemicals if catalyst selectivity can be improved in future work by alloying or tuning metal-oxide support interactions.

biomass↗

Superior metal storage behavior of Zn-containing porous carbon nanostructures for Na and Li metal batteries

Na and Li metals are ideal anodes for high-energy rechargeable batteries. However, their poor coulombic efficiency and the associated safety issues due to dendritic metal deposition and large volume changes during metallic plating/stripping are the major causes that persistently hinder their practical energy-storage applications. Herein, Zn-containing carbon nanostructures derived from typical zeolitic imidazolate framework-8 (ZIF-8) are proposed as advanced metal anode materials for both Na and Li metal batteries. In this study; the three-dimensional interconnected porous surfaces confine metallic Na and Li within the nanostructures, filling the carbon scaffold, and covering the electrode surface to form stable solid electrolyte interphases. Based on the metal nucleation and growth results obtained through various electrochemical tests, Zn incorporation and pore morphology have been revealed to be the key factors that regulate the metal nucleation and metallic plating/stripping during cycling. Thus, the incorporation of Zn in the closed pores of a carbon nanostructure improves the cycle performance, even in carbonate electrolytes, and produces stable Na and Li metallic anodes for next-generation rechargeable batteries.

25 ENERGY STORAGE↗