Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metal Forming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Characterization of two dimensional self-organized Au nanoparticles embedded in Si{sub 3}N{sub 4}

Au/Si{sub 3}N{sub 4} films have been prepared by gold and silicon nitride sequential sputtering with different Au thicknesses. The goal is to investigate the Au growth mode and to identify the regime where Au nanoparticles (NPs) can be prepared. The number of Au atoms, the bilayer thickness, the Au environment, the size, and the organization of the particles have been determined. Gold appears in metallic form. The thickest Au layer (8 nm) is continuous whereas the thinnest ones (with average values of 1-3 nm) are formed by nearly spherical Au NPs with diameters in the 5-7 nm range. Au NPs spatial self-organization is observed for average thickness of t{sub Au}=2.9 nm. These growth modes are discussed and compared with those observed for other metal/Si{sub 3}N{sub 4} systems prepared in similar conditions.

36 MATERIALS SCIENCE↗

System and method for producing metallic iron nodules

A method for producing metallic iron nodules by assembling a shielding entry system to introduce coarse carbonaceous material greater than 6 mesh in to the furnace atmosphere at location(s) where the temperature of the furnace atmosphere adjacent at least partially reduced reducible iron bearing material is between about 2200 and 2650.degree. F. (1200 and 1450.degree. C.), the shielding entry system adapted to inhibit emission of infrared radiation from the furnace atmosphere and seal the furnace atmosphere from exterior atmosphere while introducing coarse carbonaceous material greater than 6 mesh into the furnace to be distributed over the at least partially reduced reducible iron bearing material, and heating the covered at least partially reduced reducible iron bearing material in a fusion atmosphere to assist in fusion and inhibit reoxidation of the reduced material during fusion to assist in fusion and inhibit reoxidation of the reduced material in forming metallic iron nodules.

36 MATERIALS SCIENCE↗

Border trap reduction in Al{sub 2}O{sub 3}/InGaAs gate stacks

The effect of Al{sub 2}O{sub 3} atomic layer deposition (ALD) temperature on the border trap density (N{sub bt}) of Al{sub 2}O{sub 3}/InGaAs gate stacks is investigated quantitatively, and we demonstrate that lowering the trimethylaluminum (TMA)/water vapor ALD temperature from 270 °C to 120 °C significantly reduces N{sub bt}. The reduction of N{sub bt} coincides with increased hydrogen incorporation in low temperature ALD-grown Al{sub 2}O{sub 3} films during post-gate metal forming gas annealing. It is also found that large-dose (∼6000 L) exposure of the In{sub 0.53}Ga{sub 0.47}As (100) surface to TMA immediately after thermal desorption of a protective As{sub 2} capping layer is an important step to guarantee the uniformity and reproducibility of high quality Al{sub 2}O{sub 3}/InGaAs samples made at low ALD temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Auger electron spectroscopy of contrast-forming layers on metals

As shown by Auger electron spectroscopy, the layers formed during contrasting metallographic polished Cu and Ni with an apparatus using intense electron bombardment consist of metal sputtered from the Au, Fe, or Pb cathode. This layer takes up oxygen from the residual atmosphere. The mechanism of contrast enhancement is the same as that of vapor-deposited interference layers.

Hoffmann, Siegfried↗

Electrochemically grown metallic nanocomb structures on nanoporous alumina templates

Electrochemical growth of metallic nanocomb structures on anodized alumina templates is described. Nanocombs originate from the orderly growth and merger of very thin (d=15{+-}5 nm) metallic nanowires which do not completely fill much larger pores (d{approx}100 nm) in the alumina template (t{<=}3 {mu}m). Instead, the nanowires prefer growing along the inner corners of the hexagonal pores, coalescing into a highly ordered structure as they emerge, resulting a metallic form reminiscent of the topology of the original template. We disclose here the typical processing conditions and the microstructure of this previously unknown material as observed with a scanning electron microscope (SEM) and energy dispersive x-ray (EDX) spectroscopy. It is shown that Au nanocombs have an anomalous EDX spectra and can emit electrons at a field of {approx}1 kV/cm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Springback Compensation Based on FDM-DTF Method

Stamping part error caused by springback is usually considered to be a tooling defect in sheet metal forming process. This problem can be corrected by adjusting the tooling shape to appropriate shape. In this paper, springback compensation based on FDM-DTF method is proposed to be used for design and modification of the tooling shape. Firstly, based on FDM method, the tooling shape is designed by reversing inner force's direction at the end of forming simulation, the required tooling shape can be got through some iterations. Secondly actual tooling is produced based on results got in the first step. When the tooling and part surface discrete data are investigated, the transfer function between numerical springback error and real springback error can be calculated based on wavelet transform results, which can be used in predicting the tooling shape for the desired product. Finally the FDM-DTF method is proved to control springback effectively after it has been applied in the 2D irregular product springback control.

36 MATERIALS SCIENCE↗

Synthetic Access to a Framework-Stabilized and Fully Sulfided Analogue of an Anderson Polyoxometalate that is Catalytically Competent for Reduction Reactions

Polyoxometalates (POMs) featuring 7, 12, 18, or more redox-accessible transition metal ions are ubiquitous as selective catalysts, especially for oxidation reactions. The corresponding synthetic and catalytic chemistry of stable, discrete, capping-ligand-free polythiometalates (PTMs), which could be especially attractive for reduction reactions, is much less well developed. Among the challenges are the propensity of PTMs to agglomerate and the tendency for agglomeration to block reactant access of catalyst active sites. Nevertheless, the pervasive presence of transition metal sulfur clusters metalloenzymes or cofactors that catalyze reduction reactions and the justifiable proliferation of studies of two-dimensional (2D) metal-chalcogenides as reduction catalysts point to the promise of well-defined and controllable PTMs as reduction catalysts. Here, we report the fabrication of agglomeration-immune, reactant-accessible, capping-ligand-free Co II Mo 6 IV S 24 n– clusters as periodic arrays in a water-stable, hierarchically porous Zr-metal–organic framework (MOF; NU1K) by first installing a disk-like Anderson polyoxometalate, Co III Mo 6 VI O 24 m– , in size-matched micropores where the siting is established via difference electron density (DED) X-ray diffraction (XRD) experiments. Flowing H 2 S, while heating, reduces molybdenum(VI) ions to Mo(IV) and quantitatively replaces oxygen anions with sulfur anions (S 2– , HS – , S 2 2– ). DED maps show that MOF-templated POM-to-PTM conversion leaves clusters individually isolated in open-channel-connected micropores. Importantly, the structure of the immobilized cluster as determined, in part, by X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS) analysis, and pair distribution function (PDF) analysis of total X-ray scattering agrees well with the theoretically simulated structure. PTM@MOF displays both electrocatalytic and photocatalytic competency for hydrogen evolution. Nevertheless, the initially installed PTM appears to be a precatalyst, gaining competency only after the loss of ~3 to 6 sulfurs and exposure to hydride-forming metal ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An analysis of HS6-5-2 steel viscosity in the semi-solid state

The main objective of this study was an analysis of the rheological properties of selected steel alloy in the semi-solid state. A knowledge of the rheological properties of material is crucial for the numerical modeling of the shaping technology. Semi-solid processing of metal alloys, also known as thixoforming processes, is an innovative method which has many advantages in comparison with classical metal forming and foundry processes. The most significant achievement of this particular study is the application of a viscometer which was specially designed for material tests executed at extremely high temperatures, such as the measurement of liquid or semi-liquid steel viscosity. This paper presents the results of a rheological analysis of HS6-5-2 (PN SW7M) tool steel. It was performed using a rotational viscometer with a stationary external cup. The results were used for the development of mathematical models of the apparent viscosity.

36 MATERIALS SCIENCE↗

Extrusion Process by Finite Volume Method Using OpenFoam Software

The computational codes are very important tools to solve engineering problems. In the analysis of metal forming process, such as extrusion, this is not different because the computational codes allow analyzing the process with reduced cost. Traditionally, the Finite Element Method is used to solve solid mechanic problems, however, the Finite Volume Method (FVM) have been gaining force in this field of applications. This paper presents the velocity field and friction coefficient variation results, obtained by numerical simulation using the OpenFoam Software and the FVM to solve an aluminum direct cold extrusion process.

42 ENGINEERING↗

Hygroscopic Metal-Complex Coated Metal Foam for Moisture Management

Moisture management for improving indoor air quality is critical for health and thermal comfort. Recently, the use of desiccant-coated heat exchangers (HXs) has emerged as a promising dehumidification approach to reduce energy consumption as compared with conventional vapor compression-based air dehumidification. The desiccant material is a key component of dehumidification performance. However, currently used desiccant materials have a low moisture uptake capability and require a high temperature for regeneration. The current study investigated the dehumidification performance of a metal-complex-based hygroscopic desiccant-coated metal foam HX. Furthermore, the results revealed that the desiccant-coated foams display increased hydrophilicity compared with the uncoated metal surfaces. Additionally, the desiccant coating had superior moisture absorption capability of more than 2 g/g desiccant , which is much higher than commonly used zeolite and silica gels. Wind tunnel experiments showed that the coating absorbs moisture from humid air and can be effectively regenerated at low temperatures. Additionally, the coating did not increase the pressure drop of the HX. Overall, the results of this study suggest that this desiccant-coated metal form can potentially be used for moisture management in the building sector.

Atmospheric chemistry↗

Magnetite Dissolution using Hydrazine-Acid Solution for Chemical Decontamination

Chemical decontamination is committed to giving safe decommissioning of nuclear facilities as well as maintenance during the normal operation under sufficiently reduced radiation field. The removal of radioisotopes from the primary coolant system of nuclear power plant takes place with the dissolution of metal oxide layer. Dissolution of metal oxides in aqueous acidic solutions is primarily controlled by the protonation of metal-oxygen bonding to release the metal ions from the oxide lattices but in the presence of reducing or chelating agents dissolution is often facilitated by the enhanced mass transfer of metal ions together with chelating reagents as well as metal reduction to soluble state such as insoluble ferric ions to soluble ferrous ions of hematite. The mechanisms and kinetics related to the metal oxides dissolution in varied acidic reagents have been reported for many decades even though a general picture of dissolution is not available due to the peculiarity of each oxide in structure, stability of metal ions, solubility, and reactivity. In a number of experimental results and practical reports, organic acids such as oxalic acid, citric acid, ascorbic acid, malonic acid, thioglycolic acid, etc. were used as solvent reagents and many other literatures reported the effectiveness of the chelating agents in dissolution rate such as iminodiacetic acid (IDA), diethylene triamine pentaacetic acid (DTPA), nitrilo triacetic acid (NTA), and ethylenediaminetetraacetic acid (EDTA) by the sorption of dissolved metal ions forming stable metal chelates. Also reductive dissolution by the addition of reducing reagents such as hydrazine, vanadium as well as organic acids was reported with effective experimental results. However, organic acids and chelating ligands are often problematic on the safety of radioactive wastes. Organic compounds in a repository potentially form a complex with radionuclides, which increases the mobility of radionuclides and consequently increases the probability of the radioactive contamination of groundwater. Furthermore oxalic acid can cause a severe intergranular attack (IGA) to the type 304 stainless steel. Therefore, the use of organic acids or chelating reagents even though those effects to the dissolution performance is much greater than other chemical components must be minimized or carefully determined with appropriate treatment processes. Alternatively dissolution accommodated by inorganic reducing reagents or catalysts in inorganic acid solutions have been extensively studied for the feasible dissolution outcomes. The mixture of sulfuric acid and sulfurous acids as a dissolution media was reported to increase dissolution rate due to the effect of protonation by H{sub 2}SO{sub 4} and reducing effect of H{sub 2}SO{sub 3}. The increased dissolution of magnetite was also found in sulfur dioxide solution containing copper ions because SO{sub 2} plays as a reducing catalyst to form FeHSO{sub 3}{sup +} with Fe(III) from iron oxides and accordingly the concentration of Fe(III) ions decreases to accelerate the iron oxide dissolution. The present study is concerned with the feasibility of not using the organic compounds for the dissolution of oxide layers. We propose an acidic solution containing sulfuric acid, hydrazine, and copper ions for the effective dissolution of magnetite powders. The effects of both hydrazine and copper ions as a reducing agent and a catalyst respectively to promote the reducing power, as well as temperature will be investigated on the dissolution of magnetite powder. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modelling the Thermo-Mechanical Behavior of Magnesium Alloys during Indirect Extrusion

One of the basic metal forming process for semi-finished products is extrusion. Since extrusion involves complex thermo-mechanical and multiaxial loading conditions resulting in large strains, high strain rates and an increase in temperature due to deformation, a proper yield criterion and hardening law should be used in the numerical modelling of the process. A phenomenological model based on a plastic potential has been proposed that takes strain, strain rate and temperature dependency on flow behaviour into consideration. A hybrid methodology of experiment and finite element simulation has been adopted in order to obtain necessary model parameters. The anisotropy/asymmetry in yielding was quantified by tensile and compression tests of specimens prepared from different directions. The identification of the corresponding model parameters was performed by a genetic algorithm. A fully coupled thermo-mechanical analysis has been used in extrusion simulations for calculation of the temperature field by considering heat fluxes and heat generated due to plastic deformation. The results of the approach adopted in this study appeared to be successful showing promising predictions of the experiments and thus may be extended to be applicable to other magnesium alloys or even other hcp metals.

36 MATERIALS SCIENCE↗

Use of Au@Void@TiO 2 yolk-shell nanostructures to probe the influence of oxide crystallinity on catalytic activity for low-temperature oxidations

A series of Au@Void@TiO 2 yolk-shell structures were synthesized and characterized, and their catalytic activity was tested for the oxidation of carbon monoxide. The target of this study was to evaluate the effects of (1) the crystallinity of the TiO 2 shell and (2) the presence of titanate phases. Transmission electron microscopy and X-ray diffraction data show that increasing calcination temperatures, from 850 to 1250 K, leads to the formation of larger titania crystallites. These crystallites are typically in the form of anatase, but some rutile is also made at high temperatures. The general yolk-shell nanostructures retain their basic characteristics upon calcination and upon treatment with HCl (used to remove the titanate phases), but a few structural and chemical changes do take place: (1) the void-space diameter is reduced by approximately 10% when going from T Calc = 850 K to T Calc = 1250 K, a change that is accompanied by a decrease in the surface area (estimated from N 2 adsorption-desorption isotherms); (2) the shell thickness remains unaffected by either calcination or HCl treatment; (3) the pore volume also remains approximately constant with increasing calcination temperature in the catalysts free of titanates but diminishes significantly in the samples with titanate phases; (4) the mesoporosity is minimal in all yolk-shell nanostructures but more noticeable with the pure TiO 2 shells; (5) the titanates have high Na content (measured by X-ray photoelectron spectroscopy), but that Na is fully removed upon treatment with HCl; (6) no Ti 3+ was detectable in any of the samples, but silica, together with C and (minor amounts of) N, was present in all; (7) all Au is in metallic form; (8) two temperature regimes were observed for the catalytic oxidation of CO, as reported for other similar samples in the past, an Arrhenius regime around or above room temperature, and a cryogenic range going to temperatures as low as 120 K; (9) the latter regime is only seen with the samples containing titanate phases; (10) the titanates seem to also aid in the oxidation at higher temperatures; and (11) in general, increasing titania crystallinity leads to a decrease the catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Endophyte-Promoted Phosphorus Solubilization in Populus

Phosphorus is an important plant nutrient, but in soils the majority of phosphorus, present in the form of a phosphate, forms metal complexes in soil making it relatively unavailable to plants. Therefore, inorganic phosphate solubilization is an important process of plant growth promotion by plant associated bacteria and fungi. Non nodulating plant species have been shown to thrive in low-nutrient environments, in some instances by relying on plant associated microorganisms called endophytes. These microorganisms live within the plant and help supply nutrients for the plant. Despite their potential enormous environmental importance, there are a limited number of studies looking at the direct molecular impact of phosphate solubilizing endophytic bacteria on the host plant. In this work, we studied the impact of two endophyte strains of wild poplar (Populus trichocarpa) that solubilize phosphate. Using a combination of x-ray imaging, spectroscopy methods, and proteomics we report direct evidence of endophyte-promoted phosphorus uptake in poplar. We found that the solubilized phosphate inside the plant may react and become insoluble again suggesting that the phosphate could be re-released within the plant by endophytes. Using synchrotron x-ray fluorescence spectromicroscopy combined with x-ray absorption near-edge structure, we visualized the nutrient phosphorus inside poplar roots inoculated by the selected endophytes and found the phosphorus in both forms of organic and inorganic phosphates inside the root. Tomography-based root imaging revealed a markedly different root biomass and root architecture for poplar samples inoculated with the phosphate solubilizing bacteria strains. Proteomics characterization on poplar roots coupled with protein network analysis revealed novel proteins and metabolic pathways with possible involvement in endophyte enriched phosphorus uptake. These findings suggest an important role of endophytes for phosphorus acquisition and provide a deeper understanding of the critical symbiotic associations between poplar and the endophytic bacteria.

36 MATERIALS SCIENCE↗

Stepwise synthesis, characterization, and electrochemical properties of ordered mesoporous carbons containing well-dispersed Pt nanoparticles using a functionalized template route

A stepwise method is described for the accurately controlled growth of Pt nanoparticles supported on ordered mesoporous carbons (Pt-OMC) by the nanocasting of carbon and metal precursors in the pore channels of mesoporous silicas functionalized with Si-H groups. Results obtained from N{sub 2} adsorption/desorption isotherms and transmission electron microscopy showed well-dispersed Pt nanoparticles (2-3 nm) on Pt-OMC with high surface area (837 m{sup 2} g{sup -1}) and regular pore channels (2.9 nm), which facilitate reactant/product diffusion. X-ray diffraction and X-ray photoelectron spectroscopy indicated that Pt nanoparticles in the Pt-OMC sample were mostly present in the metallic form of a face-centered cubic (fcc) crystalline structure. The Pt-OMC catalyst was found to have superior electrocatalytic properties during oxygen reduction reaction as compared to typical commercial electrocatalysts. - Graphical abstract: A novel procedure has been developed to synthesize ordered carbon mesoporous carbons (OMC) containing well-dispersed and highly electrocatalytic Pt nanoparticles (Pt-OMC) for oxygen reduction reaction. Highlights: > A novel method to incorporate nanosized Pt particles on nanostructure carbons. > Functionalized silica templates were used to control size and distribution of Pt nanoparticles. > Electrochemical measurements of oxygen reduction demonstrated high catalytic activity compared to common commercial catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Friction Tests in Magnesium Tube Hydroforming at Elevated Temperatures

In metal forming, lubricants have a variety of functions. The top priority is usually reduction of friction in order to increase the formability of the materials and reduce tool wear. Because magnesium alloys have very poor formability at room temperature, it is essential to manufacture a part from Magnesium alloys at elevated temperatures. The aim of this paper is to present a friction test method to evaluate the performance of different kinds of lubricants and determine their coefficients of friction at elevated temperatures in tube hydroforming of magnesium alloys. A self-designed experimental apparatus is used to carry out the experiments of friction tests. The coefficient of friction between the tube and die at guiding zone is determined. The effects of the internal pressure, the axial feeding velocity and temperatures on the friction forces and coefficients of friction for different lubricants are discussed.

36 MATERIALS SCIENCE↗

Focused ion beam and electron microscopy characterization of nanosharp tips and microbumps on silicon and metal thin films formed via localized single-pulse laser irradiation

Cross-sections of laser fabricated nanosharp tips and microbumps on silicon and metal thin films are produced and examined in this work. These structures are formed with a Q-switched neodymium doped yttrium aluminum garnet nanosecond-pulse laser, emitting at its fourth harmonic of 266 nm, using a mask projection technique to generate circular laser spots, several microns in diameter. Cross-section of selected structures were produced using a focused ion beam and were characterized via electron microscopy. The diffraction patterns of the silicon samples indicate that the laser formed tip maintains the same single crystal structure as the original silicon film. Examinations of the laser formed structures in metal films confirm that the microbumps are hollow, while revealing that the vertical protrusions are solid.

36 MATERIALS SCIENCE↗

Fragmentation in dusty low-metallicity star-forming halos

The first stars in the universe, termed Population III, are thought to have been very massive compared to the stars that form in the present epoch. As feedback from the first generation of stars altered the contents of the interstellar medium, the universe switched to a low-mass mode of star formation, which continues in the high-metallicity stars formed in the present era. Several studies have investigated the transition between metal-free and metal-enriched star formation, with tentative evidence being found for a metallicity threshold near 10{sup –3.5} Z {sub ☉} due to atomic and molecular transitions and another threshold near 10{sup –5.5} Z {sub ☉} due to dust. In this work, we simulate the fragmentation of cooling gas in idealized, low-metallicity halos using the adaptive mesh refinement code Enzo. We conduct several simulations of 10{sup 6} M {sub ☉} and 10{sup 7} M {sub ☉} halos at z = 20 in which the metal content, initial rotation, and degree of turbulence are varied in order to study the effect of these properties on gas fragmentation over a range of densities. We find tentative support for the idea of a critical metallicity, but the effect of varying metallicity on the gas we observe is not as dramatic as what has been reported in earlier studies. It is theorized that at lower redshifts with a lower cosmic microwave background temperature, variations in metallicity might have a larger effect on cooling and fragmentation. We find no clear relation between the initial spin or the initial level of turbulence in the halo and the final properties of the gas contained therein. Additionally, we find that the degree to which the Jeans length is refined, the initial density profile of the gas, and the inclusion of deuterium chemistry each have a significant effect on the evolution and fragmentation of the gas in the halo—in particular, we find that at least 64 grid cells are needed to cover the Jeans length in order to properly resolve the fragmentation.

79 ASTRONOMY AND ASTROPHYSICS↗