Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Materials Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The development and testing of a regenerable CO2 and humidity control system for Shuttle

A regenerable CO2 and humidity control system is presently being developed for potential use on Shuttle as an alternate to the baseline lithium hydroxide (LiOH) system. The system utilizes a sorbent material (designated 'HS-C') to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Continuous operation is achieved by utilizing two beds which are alternately cycled between adsorption and desorption. This paper presents the significant hardware development and test accomplishments of the past year. A half-size breadboard system utilizing a flight configuration canister was successfully performance tested in simulated Shuttle missions. A vacuum desorption test provided considerable insight into the desorption phenomena and allowed a significant reduction of the Shuttle vacuum duct size. The fabrication and testing of a flight prototype canister and flight prototype vacuum valves have proven the feasibility of these full-size, flight-weight components.

Boehm, A. M.↗
NASA NTRS1977

Flight prototype CO2 and humidity control system

A regenerable CO2 and humidity control system is presently being developed for potential use on the space shuttle as an alternative to the baseline lithium hydroxide system. The system utilizes a sorbent material (designated HS-C) to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Continuous operation is achieved by utilizing two beds which are alternately cycled between adsorption and desorption. A shuttle vehicle integration study showed that the HS-C system offers substantial weight advantages compared to the baseline shuttle orbiter expendable lithium hydroxide CO2 removal system for extended missions beyond the nominal design of four men for seven days. This study defined a system packaging envelope in the area presently occupied by the LiOH cartridges.

Rudy, K. M.↗
NASA NTRS1980

Cost estimating Brayton and Stirling engines

Brayton and Stirling engines were analyzed for cost and selling price for production quantities ranging from 1000 to 400,000 units per year. Parts and components were subjected to indepth scrutiny to determine optimum manufacturing processes coupled with make or buy decisions on materials and small parts. Tooling and capital equipment costs were estimated for each detail and/or assembly. For low annual production volumes, the Brayton engine appears to have a lower cost and selling price than the Stirling Engine. As annual production quantities increase, the Stirling becomes a lower cost engine than the Brayton. Both engines could benefit cost wise if changes were made in materials, design and manufacturing process as annual production quantities increase.

Fortgang, H. R.↗
NASA NTRS1980

Large space structures activity at MSFC

This paper describes a broad based set of activities which have been undertaken at the Marshall Space Flight Center (MSFC) developing technologies necessary to emplace and operate large structures in space. Progress has been made in the development of processes and equipment needed for the in space fabrication of structural members in both aluminum and graphite composite materials. Designs for member joining attachments have been completed and the evaluation of procedures for structural assembly have been simulated and evaluated utilizing the MSFC Neutral Buoyancy Facility. A concept of a flight test necessary for flight verification of the technologies for space fabrication, assembly, and operation of large space structure is described. Recently initiated is a project to develop design characteristics of a deployable structure required for the Science and Applications Space Platform (SASP). This is being accomplished through the design, fabrication, analysis, and test of a full scale ground test article which reflects the influence of system requirements of the SASP. Development of designs for erectable/deployable structures which are modular and have various applications to large space structures is in progress.

Denton, S. J.↗
NASA NTRS1979

Physical/chemical modeling for photovoltaic module life prediction

The paper presents a generalized methodology for identification and evaluation of potential degradation and failure of terrestrial photovoltaic encapsulation. Failure progression modeling and an interaction matrix are utilized to complement the conventional approach to failure degradation mode identification. Comparison of the predicted performance based on these models can produce: (1) constraints on system or component design, materials or operating conditions, (2) qualification (predicted satisfactory function), and (3) uncertainty. The approach has been applied to an investigation of an unexpected delamination failure; it is being used to evaluate thermomechanical interactions in photovoltaic modules and to study corrosion of contacts and interconnects.

Moacanin, J.↗
NASA NTRS1981

Research in the comprehension of engineering lectures by non-native speakers

Failure by foreign students to perceive the rhetorical structure or overall organization of an engineering lecture, rendering them unable to understand it, is discussed. Equally serious failure by such students to perceive the organizing role of theory in structuring the activities in their field is reported. Failure to identify the role of theory in the problem-solving process that underlies engineering is emphasized. Engineering was not seen as a series of on-going problems where each stage of solution exposed new problems to be solved. Implications for course planners and material designers are discussed.

Olsen, L. A.↗
NASA NTRS1983

Space Shuttle Orbiter Leading Edge Structural Subsystem development

The development of the Space Shuttle Orbiter Leading Edge Structural Subsystem (LESS) is traced from concept definition, through technical development, to final design, qualification testing and flight performance. A detailed description of the LESS is presented to support a discussion of the design, material development and thermal/structural integration. Extensive development/qualification tests and analytical studies were performed to verify the thermal/structural system performance and to certify the LESS for flight. Flight data and detailed post-flight inspection results are presented which support the conclusion that the LESS system performance has been outstanding.

Curry, D. M.↗
NASA NTRS1981

The influence of environmental effects on the mechanical properties of graphite/epoxy laminates

The time dependent deformational and creep rupture processes in graphite/epoxy laminates are examined as a function of temperature and stress level. The role of accelerated characterization of design materials is discussed, and the use of a nonlinear time-temperature-stress-superposition principle in the determination of compliance master curves as a function of stress and temperature is considered. Creep rupture analytical models are discussed as applied to polymer-matrix composites, and the data is shown to be in general agreement with a logarithmic stress and temperature-dependent delayed fracture model. Comparisons between creep and rupture experiments and phenomenological models are presented.

Brinson, H. F.↗
NASA NTRS1984

Ceramic applications in turbine engines

The application of ceramic components to demonstrate improved cycle efficiency by raising the operating temperature of the existing Allison IGI 404 vehicular gas turbine engine is discussed. This effort was called the Ceramic Applications in Turbine Engines (CATE) program and has successfully demonstrated ceramic components. Among these components are two design configurations featuring stationary and rotating caramic components in the IGT 404 engine. A complete discussion of all phases of the program, design, materials development, fabrication of ceramic components, and testing-including rig, engine, and vehicle demonstation test are presented. During the CATE program, a ceramic technology base was established that is now being applied to automotive and other gas turbine engine programs. This technology base is outlined and also provides a description of the CATE program accomplishments.

Helms, H. E.↗
NASA NTRS1984

Progress in the utilization of an oxide-dispersion-strengthened alloy for small engine turbine blades

The conventional means of improving gas turbine engine performance typically involves increasing the turbine inlet temperature; however, at these higher operational temperatures the high pressure turbine blades require air-cooling to maintain durability. Air-cooling imposes design, material, and economic constraints not only on the turbine blades but also on engine performance. The use of uncooled turbine blades at increased operating temperatures can offer significantly improved performance in small gas turbine engines. A program to demonstrate uncooled MA6000 high pressure turbine blades in a GTEC TFE731 turbofan engine is being conducted. The project goals include demonstration of the advantages of using uncooled MA6000 turbine blades as compared with cast directionally solidified MAR-M 247 blades.

Beatty, T. G.↗
NASA NTRS1986

How different a modern SST would be

The characteristics of a proposed SST are described. The proposed aircraft is to have two engines and an arrow-wing design, a passenger capacity of 250, and attain speeds of Mach 2.7. The low fineness ratio, low-aspect ratio wing planform, different engine nacelles location, and improved lift-to-drag ratio of the aircraft contribute to attaining an economical supersonic cruise. The proposed structural design and materials for the aircraft are examined; the material and design are to be applicable to high Mach and high temperature. Changes in the SST propulsion system, the nozzle designs, and landing and takeoff procedures to improve the operation of the aircraft are discussed.

Driver, C.↗
NASA NTRS1986

Structural ceramics research

Ceramic research at the University of Washington, brittle materials design program, and NASA program research at the University of Washington are outlined.

Mueller, J. I.↗
NASA NTRS1987

Telescope structures - An evolutionary overview

A development history is presented for telescope structural support materials, design concepts, equatorial and altazimuthal orientational preferences, and mechanical control system structural realizations. In the course of 50 years after Galileo, the basic configurations of all reflecting telescopes was set for the subsequent 300 years: these were the Cassegrain, Gregorian, and Newtonian designs. The challenge of making a lightweight ribbed pyrex glass primary mirror for the 5-m Palomar telescope was met by von Karman's use of finite element analysis. Attention is given to the prospects for a 20-m deployable space-based reflecting telescope.

Meinel, Aden B.↗
NASA NTRS1988

Improving turbine blade fatigue life

Turbine airfoil design, materials, and cooling system management are variables which, when optimized, can contribute to longer turbine component lives. These advancements have been identified as redesign techniques to improve the turbine fatigue life of the SSME High Pressure Fuel Turbopump. This paper discusses the general program approach toward improving turbine fatigue life.

Buddenbohm, H. W.↗
NASA NTRS1990

Lunar astronomical observatories - Design studies

The best location in the inner solar system for the grand observatories of the 21st century may be the moon. A multidisciplinary team including university students and faculty in engineering, astronomy, physics, and geology, and engineers from industry is investigating the moon as a site for astronomical observatories and is doing conceptual and preliminary designs for these future observatories. Studies encompass lunar facilities for radio astronomy and astronomy at optical, ultraviolet, and infrared wavelengths of the electromagnetic spectrum. Although there are significant engineering challenges in design and construction on the moon, the rewards for astronomy can be great, such as detection and study of earth-like planets orbiting nearby stars, and the task for engineers promises to stimulate advances in analysis and design, materials and structures, automation and robotics, foundations, and controls. Fabricating structures in the reduced-gravity environment of the moon will be easier than in the zero-gravity environment of earth orbit, as Apollo and space-shuttle missions have revealed. Construction of observatories on the moon can be adapted from techniques developed on the earth, with the advantage that the moon's weaker gravitational pull makes it possible to build larger devices than are practical on earth.

Johnson, Stewart W.↗
NASA NTRS1990

Advanced composites research and development for transport aircraft

This paper highlights past experiences, lessons learned, state-of-the-art and current research activities directed at providing an integrated 'affordable' data base for composite structures. Composite secondary and empennage structures are in production on several transport aircraft. The weight reduction potential of composite structures is well documented. However, the cost to develop and produce composite structures remains the major barrier to increased application of this technology to transport aircraft. Specific technology items that are being developed under the NASA Advanced Composites Technology Program are described. Materials, design concepts, structural mechanics methodology and manufacturing processes and equipment are under development or are emerging that are expected to lead to an integrated 'affordable' data base. Technology verification for the next decade is expected to require fabrication and testing of full-scale wing-box and fuselage-section components before certificatiaon can occur and production commitments can be made.

Davis, John G., Jr.↗
NASA NTRS1991

Pellet bed reactor for nuclear propelled vehicles: Part 1: Reactor technology

The pellet bed reactor (PBR) for nuclear propelled vehicles is briefly discussed. Much of the information is given in viewgraph form. Viewgraphs include information on the layout for a Mars mission using a PBR nuclear thermal rocket, the rocket reactor layout, the fuel pellet design, materials compatibility, fuel microspheres, microsphere coating, melting points in quasibinary systems, stress analysis of microspheres, safety features, and advantages of the PBR concept.

El-Genk, Mohamed S.↗
NASA NTRS1991

Development of an improved mirror facet for space applications

A fabrication technique was successfully developed for a metallic aluminum honeycomb, high-accuracy, lightweight, and long-life solar concentrator (mirror) for Advanced Solar Dynamic Space Power Systems. The program scope was limited to the development, fabrication, evaluation, and delivery of a solar concentrator facet (petal) that was sized for a 2-meter deployable solar concentrator. A surface accuracy of 1.0 mrad was achieved. The development incorporated tooling design, material selection, facet forming, adhesive selection, testing, and analysis. Techniques for applying levelizing, reflective, and protective optical coatings were also developed.

Schertz, Paul↗