Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetization switching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Correlation-driven eightfold magnetic anisotropy in a two-dimensional oxide monolayer

Engineering magnetic anisotropy in two-dimensional systems has enormous scientific and technological implications. The uniaxial anisotropy universally exhibited by two-dimensional magnets has only two stable spin directions, demanding 180° spin switching between states. We demonstrate a previously unobserved eightfold anisotropy in magnetic SrRuO 3 monolayers by inducing a spin reorientation in (SrRuO 3 ) 1 /(SrTiO 3 ) N superlattices, in which the magnetic easy axis of Ru spins is transformed from uniaxial $\langle 001 \rangle$ direction ( N < 3) to eightfold $\langle 111 \rangle$ directions ( N ≥ 3). This eightfold anisotropy enables 71° and 109° spin switching in SrRuO 3 monolayers, analogous to 71° and 109° polarization switching in ferroelectric BiFeO 3 . First-principle calculations reveal that increasing the SrTiO 3 layer thickness induces an emergent correlation-driven orbital ordering, tuning spin-orbit interactions and reorienting the SrRuO 3 monolayer easy axis. Our work demonstrates that correlation effects can be exploited to substantially change spin-orbit interactions, stabilizing unprecedented properties in two-dimensional magnets and opening rich opportunities for low-power, multistate device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Picosecond volume expansion drives a later-time insulator–metal transition in a nano-textured Mott insulator

There is significant technological interest in developing ever faster switching between different electronic and magnetic states of matter. Manipulating properties at terahertz rates requires accessing the intrinsic timescales of both electrons and associated phonons, which is possible with short-pulse photoexcitation. However, in many Mott insulators, the electronic transition is accompanied by the nucleation and growth of percolating domains of the changed lattice structure, leading to empirical timescales dominated by slowly coarsening dynamics. Here, in this study, we use time-resolved X-ray diffraction and reflectivity measurements to show that the photoinduced insulator-to-metal transition in an epitaxially strained Mott insulating thin film occurs without observable domain formation and coarsening effects, allowing the study of the intrinsic electronic and lattice dynamics. Above a fluence threshold, the initial electronic excitation drives a fast lattice rearrangement, which is followed by a slower electronic evolution into a metastable nonequilibrium state. Microscopic model calculations based on time-dependent dynamical mean-field theory and semiclassical lattice dynamics explain the threshold behaviour and elucidate the delayed onset of the electronic phase transition. This work highlights the importance of combined electronic and structural studies in unravelling the physics of dynamic transitions and the timescales of photoinduced processes. During a photoinduced phase transition, electronic rearrangements are usually faster than lattice ones. Time-resolved measurements now show that the insulator-to-metal transition in a thin-film Mott insulator is preceded by lattice reconfiguration.

36 MATERIALS SCIENCE↗
DOE OSTI2026

A Unified Off-Board Charging System for Integrated Wired and Wireless EV Charging

This work explores a unified off-board charger approach that enables both wired and wireless charging within a single system architecture. Instead of deploying two independent converters, the proposed configuration switches between an LLC-based operation for wired charging and an LCC-S–type operation for wireless charging by rearranging the excitation of commonly used components. With this reconfiguration, the same switch bridge, resonant elements, and magnetic coupling coils can be utilized in both modes without relying on relays or additional hardware paths. To assess the basic operation of the proposed system, PLECS circuit simulations were performed for both wired and wireless charging modes. A 3.3-kW prototype was also built, and representative experimental results for each mode confirm that the unified converter can operate properly while reducing hardware duplication.

Jo, Cheolhui [ORNL] (ORCID:0000000322692434)↗
NASA NTRS1969

Optically exciting a magnetic memory - A feasibility study

Rare earth iron garnets were used in experiments to determine the feasibility of optically pumping a magnetic material to effect the switching process. It was found that rare earth garnets are limited by an absorption edge, only terbium and dysprosium offer a possibility of pumping at energies below the conduction band edge.

Grismore, F. L.↗
NASA NTRS1974

Very high voltage latching relay

Relay consists of high voltage reed switch actuated by rotating permanent magnet mounted on stepper motor shaft, with actuation assembly isolated from high voltage circuit. Unit can be modified for use as double pole or double pole double throw latching relay and can be used in either air or vacuum.

Lovell, R. R.↗
NASA NTRS1986

Observations of electric fields near the plasmapause at midnight

Static electric field measurements in the equatorial-plane from the 100-m double floating probe experiment carried on the SCATHA (P-78-2) satellite are reported. Eclipse measurements on auroral L shells are studied to better understand the change in magnetospheric convection at the plasmapause. The use of eclipse data allows the electric fields to be measured directly without contamination from the spacecraft photoelectron sheath; and it allows the thermal ion population in the outer plasmasphere to be observed, identifying the satellite location with respect to the plasmapause. (Such measurements are limited to near local midnight). It is found that, in the corotating frame, there is generally an electric field component in the antisolar direction during periods of low magnetic activity which begins at the edge of the plasmasphere and builds in amplitude as the satellite enters the plasma sheet. The amplitude of this electric field varies from 0.05 mV/m to 0.2 mV/m with increasing magnetic activity; the electric field switches to radially inward during periods of high activity with magnitudes up to 2 mV/m. The amplitude of the observed electric field increases with the amount of contribution from east-west currents in the earth's plasma sheet-magnetotail current system.

Olsen, R. C.↗
NASA NTRS1991

Chaos and ion heating in a slow shock

An ion heating mechanism is proposed of slow shocks, which is associated with the chaotic motion of particles in the downstream wave field. For a coherent electromagnetic wave propagating along the downstream magnetic field, corresponding to switch-off shocks, the particle motions are not chaotic. For an oblique wave, the interaction between the particles and the wave field may lead to chaotic particle motions. Such particles may be greatly thermalized within one wavelength after they are incident into the downstream wave field. The results can be used to explain the existence of the critical intermediate Mach number observed in the hybrid simulations.

Lin, Y.↗
DOE OSTI2025

Zero-bias conductance peaks at zero applied magnetic field due to stray fields from integrated micromagnets in hybrid nanowire quantum dots

Many recipes for realizing topological superconductivity rely on broken time-reversal symmetry, which is often attained by applying a substantial external magnetic field. Alternatively, using magnetic materials can offer advantages through low-field operation and design flexibility on the nanoscale. Mechanisms for lifting spin degeneracy include exchange coupling, spin-dependent scattering, spin injection – all requiring direct contact between the bulk or induced superconductor and a magnetic material. Here, we implement locally broken time-reversal symmetry through dipolar coupling from nearby micromagnets to superconductor-semiconductor hybrid nanowire devices. Josephson supercurrent is hysteretic due to micromagnets switching. At or around zero external magnetic field, we observe an extended presence of Andreev bound states near zero voltage bias. We also show a zero-bias peak plateau of a non-quantized value. Our findings largely reproduce earlier results where similar effects were presented in the context of topological superconductivity in a homogeneous wire, and attributed to more exotic time-reversal breaking mechanisms [Nat. Phys. 17, 43 (2020)]. In contrast, our stray field profiles are not designed to create Majorana modes, and our data are compatible with a straightforward interpretation in terms of trivial states in quantum dots. At the same time, the use of micromagnets in hybrid superconductor-semiconductor devices shows promise for future experiments on topological superconductivity.

Jiang, Luyao [Univ. of Pittsburgh, PA (United Stat↗
DOE OSTI2021

Observation of Defect-Assisted Magnetic Vortex Core Reversal at Ultralow Critical Velocity

The stability of structures with nontrivial topology is a subject of great interest, both from fundamental and technological perspectives. The topology of a magnetic vortex, for example, results in high stability of the vortex core polarity, which is attractive for applications. This high stability, however, greatly impedes the required deterministic polarity switching, which is typically only achieved with large magnetic fields or strong dynamic driving. Here, we show that the interaction between the vortex core and manufactured nanoscale defects in the magnetic material lowers the required driving strength for core polarity reversal by more than an order of magnitude. We excite vortex dynamics in thin permalloy disks, and map the twodimensional (2D) vortex core trajectory using 3D time-resolved Kerr microscopy. In pristine samples, we observe normal gyrotropic motion of the vortex core. After laser-induced generation of defects, however, we observe repeated vortex core reversal at much-reduced driving strength. Micromagnetic simulations reveal how local reduction of exchange coupling and saturation magnetization can create vortex core reversal sites for deterministic vortex core switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

3.5 kW/in3 Planar Coupled Inductor Design and Optimization for a 50 kW 3-level Four-Switch Buck-Boost (3L-FSBB) Converter

Planar magnetics design has been widely used in power electronics field because of the low profile, ease of manufacturability, and high power density. This paper first proposes a 3-level four-switch buck-boost (3L-FSBB) converter for the dc-dc applications where the zero common-mode (CM) voltage emissions, step-up and step-down are all required. With the consideration of power density, efficiency, and cost, a 15oz heavy copper coupled inductor for 3-level FSBB converter was designed and optimized with the low-cost commercial core and planar windings. According to the soft-switching quadrangle modulation for 3-L FSBB, the turns number and stacked core number are optimized first. And then, a two-board design is proposed to reduce the fringing effect and improve the thermal performance. Finally, a 75 kVA two-stage ac-dc-dc converter including a 3-level FSBB converter was built to verify the electrical design.

Cao, Yuliang↗
DOE OSTI2023

Current-induced switching of thin film α - Fe 2 O 3 devices imaged using a scanning single-spin microscope

Electrical switching of Néel order in an antiferromagnetic insulator is desirable as a basis for memory applications. Unlike electrically driven switching of ferromagnetic order via spin-orbit torques, electrical switching of antiferromagnetic order remains poorly understood. Here we investigate the low-field magnetic properties of 30-nm-thick, c-axis-oriented α-Fe 2 ⁢O 3 Hall devices using a diamond nitrogen-vacancy center scanning microscope. Using the canted moment of α-Fe 2⁢ O 3 as a magnetic handle on its Néel vector, we apply a saturating in-plane magnetic field to create a known initial state before letting the state relax in low field for magnetic imaging. Here, we repeat this procedure for different in-plane orientations of the initialization field. We find that the magnetic field images are characterized by stronger magnetic textures for fields along [$\overline{11}$20] and 11$\overline{2}$0, suggesting that despite the expected 3-fold magnetocrystalline anisotropy, our α-Fe 2 ⁢O 3 thin films have an overall in-plane uniaxial anisotropy. We also study current-induced switching of the magnetic order in α-Fe 2 ⁢O 3 . We find that the fraction of the device that switches depends on the current pulse duration, amplitude, and direction relative to the initialization field.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unidirectional multipulse helicity-independent all-optical switching in [Ni/Pt] based synthetic ferrimagnets

Nickel-platinum-based synthetic ferrimagnets (SFi's) are highly tunable and rare-earth-free materials that allow ultrafast all optical control of magnetism to be explored. This study considers a SFi composed of a ferromagnetic [Ni/Pt] multilayer and a ferromagnetic Co layer, separated by an Ir layer that mediates an antiferromagnetic coupling. Helicity-independent all optical switching (HI-AOS) between two antiparallel magnetization states is observed. AOS may be realized at increased temperature through reduction of the thickness of the Pt layers. Switching is unidirectional and has a strong dependence on the applied magnetic field history, which suggests the possible presence of a nanoscale magnetic texture that may be important in controlling AOS in SFi systems. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2006

Magnetic-Field-Response Measurement-Acquisition System

A measurement-acquisition system uses magnetic fields to power sensors and to acquire measurements from sensors. The system alleviates many shortcomings of traditional measurement-acquisition systems, which include a finite number of measurement channels, weight penalty associated with wires, use limited to a single type of measurement, wire degradation due to wear or chemical decay, and the logistics needed to add new sensors. Eliminating wiring for acquiring measurements can alleviate potential hazards associated with wires, such as damaged wires becoming ignition sources due to arcing. The sensors are designed as electrically passive inductive-capacitive or passive inductive-capacitive-resistive circuits that produce magnetic-field-responses. One or more electrical parameters (inductance, capacitance, and resistance) of each sensor can be variable and corresponds to a measured physical state of interest. The magnetic-field- response attributes (frequency, amplitude, and bandwidth) of the inductor correspond to the states of physical properties for which each sensor measures. For each sensor, the measurement-acquisition system produces a series of increasing magnetic-field harmonics within a frequency range dedicated to that sensor. For each harmonic, an antenna electrically coupled to an oscillating current (the frequency of which is that of the harmonic) produces an oscillating magnetic field. Faraday induction via the harmonic magnetic fields produces an electromotive force and therefore a current in the sensor. Once electrically active, the sensor produces its own harmonic magnetic field as the inductor stores and releases magnetic energy. The antenna of the measurement- acquisition system is switched from a transmitting to a receiving mode to acquire the magnetic-field response of the sensor. The rectified amplitude of the received response is compared to previous responses to prior transmitted harmonics, to ascertain if the measurement system has detected a response inflection. The "transmit-receive-compare" of sequential harmonics is repeated until the inflection is identified. The harmonic producing the amplitude inflection is the sensor resonant frequency. Resonant frequency and response amplitude are stored and then correlated to calibration data.

Woodward, Stanley E.↗
DOE OSTI2025

Robust and symmetric magnetic field dependency of superconducting diode effect in asymmetric Dirac semimetal SQUIDs

The recent demonstration of the superconducting diode effect (SDE) has generated renewed interest in superconducting electronics, in which devices such as compact superconducting diodes that can perform signal rectification with low-energy operations are needed. In this article, we present our results of robust and symmetric-in-magnetic-field SDE in asymmetric superconducting quantum interference devices (SQUIDs) realized in high-quality Dirac semimetal Cd 3 As 2 thin film grown by the molecular beam epitaxy technique. Consistent with previous work, a zero magnetic field SDE is observed. Furthermore, the difference in switching current is independent of the strength and polarity of an out-plane magnetic field in the range of −10 and 10 mT. We speculate that this robust symmetric-in-field SDE in our Dirac semimetal SQUIDs is due to the formation of helical spin texture, theoretically predicted in Dirac semimetals.

Current-voltage characteristic↗
NASA NTRS2004

Bearingless Switched-Reluctance Motor Improved

The Morrison rotor, named after its inventor, is a hybrid rotor for use in a switched reluctance electric motor. The motor is characterized as bearingless in the sense that it does not rely on conventional mechanical bearings: instead, it functions as both a magnetic bearing and a motor. Bearingless switched-reluctance motors are attractive for use in situations in which large variations in temperatures and/or other extreme conditions preclude the use of conventional electric motors and mechanical bearings. In the Morrison motor, as in prior bearingless switched-reluctance motors, a multipole rotor is simultaneously levitated and rotated. In the prior motors, simultaneous levitation and rotation are achieved by means of two kinds of stator windings: (1) main motor windings and (2) windings that exert levitating forces on a multipole rotor. The multipole geometry is suboptimum for levitation because it presents a discontinuous surface to the stator pole faces, thereby degrading the vibration suppression capability of the magnetic bearing. The Morrison rotor simplifies the stator design in that it contains only one type of winding. The rotor is a hybrid that includes both (1) a circular lamination stack for levitation and (2) a multipole lamination stack for rotation. Simultaneous levitation and rotation at 6000 rpm were achieved with a prototype that included six rotor poles and eight stator poles. During normal operation, two of the four pairs of opposing stator poles (each pair at right angles to the other pair) levitate the rotor. The remaining two pairs of stator poles exert torque on the six-pole rotor lamination stack to produce rotation. The relative length of the circular and multipole lamination stacks on the rotor can be chosen to tailor the performance of the motor for a specific application. For a given overall length, increasing the length of the multipole stack relative to the circular stack results in an increase in torque relative to the levitation load capacity and vice versa.

Morrison, Carlos R.↗
NASA NTRS2003

Improved Bearingless Switched-Reluctance Motor

The Morrison rotor, named after its inventor, is a hybrid rotor for use in a bearingless switched-reluctance electric motor. The motor is characterized as bearingless in the sense that it does not rely on conventional mechanical bearings: instead, it functions as both a magnetic bearing and a motor. Bearingless switched-reluctance motors are attractive for use in situations in which large variations in temperatures and/or other extreme conditions preclude the use of conventional electric motors and mechanical bearings. In the Morrison motor, as in a prior bearingless switched-reluctance motor, a multipole rotor is simultaneously levitated and rotated. In the prior motor, simultaneous levitation and rotation are achieved by means of two kinds of stator windings: (1) main motor windings and (2) windings that exert levitating forces on a multipole rotor. The multipole geometry is suboptimum for levitation in that it presents a discontinuous surface to the stator pole faces, thereby degrading the vibration-suppression capability of the magnetic bearing. The Morrison rotor simplifies the stator design in that the stator contains only one type of winding. The rotor is a hybrid that includes both (1) a circular lamination stack for levitation and (2) a multipole lamination stack for rotation. A prototype includes six rotor poles and eight stator poles (see figure). During normal operation, two of the four pairs of opposing stator poles (each pair at right angles to the other pair) levitate the rotor. The remaining two pairs of stator poles exert torque on the six-pole rotor lamination stack to produce rotation. The relative lengths of the circular and multipole lamination stacks on the rotor can be chosen to tailor the performance of the motor for a specific application. For a given overall length, increasing the length of the multipole stack relative to the circular stack results in an increase in torque relative to levitation load capacity and stiffness, and vice versa.

Morrison, Carlos R.↗