Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

NASA's SPACE LAUNCH SYSTEM: Development and Progress

NASA is embarked on a new era of space exploration that will lead to new capabilities, new destinations, and new discoveries by both human and robotic explorers. Today, the International Space Station (ISS) and robotic probes are yielding knowledge that will help make this exploration possible. NASA is developing both the Orion crew vehicle and the Space Launch System (SLS) (Figure 1), that will carry out a series of increasingly challenging missions leading to human exploration of Mars. This paper will discuss the development and progress on the SLS. The SLS architecture was designed to be safe, affordable, and sustainable. The current configuration is the result of literally thousands of trade studies involving cost, performance, mission requirements, and other metrics. The initial configuration of SLS, designated Block 1, will launch a minimum of 70 metric tons (mT) (154,324 pounds) into low Earth orbit - significantly greater capability than any current launch vehicle. It is designed to evolve to a capability of 130 mT (286,601 pounds) through the use of upgraded main engines, advanced boosters, and a new upper stage. With more payload mass and volume capability than any existing rocket, SLS offers mission planners larger payloads, faster trip times, simpler design, shorter design cycles, and greater opportunity for mission success. Since the program was officially created in fall 2011, it has made significant progress toward launch readiness in 2018. Every major element of SLS continued to make significant progress in 2015. Engineers fired Qualification Motor 1 (QM-1) in March 2015 to test the 5-segment motor, including new insulation, joint, and propellant grain designs. More than 70 major components of test article and flight hardware for the Core Stage have been manufactured. Seven test firings have been completed with an RS-25 engine under SLS operating conditions. The test article for the Interim Cryogenic Propulsion Stage (ICPS) has also been completed. Major work continues in 2016 as the program continues both flight and development RS-25 engine testing, begins welding test article and flight core stage tanks, completes stage adapter manufacturing, and test fires the second booster qualification motor. This paper will discuss the program's key accomplishments to date and the challenging work ahead for what will be the world's most capable launch vehicle.

Honeycutt, John↗
NASA NTRS2015

Assessing Eruption Column Height in Ancient Flood Basalt Eruptions

A buoyant plume model is used to explore the ability of flood basalt eruptions to inject climate-relevant gases into the stratosphere. An example from the 1986 Izu-Oshima basaltic fissure eruption validates the model's ability to reproduce the observed maximum plume heights of 12-16 km above sea level, sustained above fire-fountains. The model predicts maximum plume heights of 13-17 km for source widths of between 4-16 m when 32% (by mass) of the erupted magma is fragmented and involved in the buoyant plume (effective volatile content of 6 wt%). Assuming that the Miocene-age Roza eruption (part of the Columbia River Basalt Group) sustained fire-fountains of similar height to Izu-Oshima (1.6 km above the vent), we show that the Roza eruption could have sustained buoyant ash and gas plumes that extended into the stratosphere at approximately 45 deg N. Assuming 5 km long active fissure segments and 9000 Mt of SO2 released during explosive phases over a 10-15 year duration, the approximately 180 km of known Roza fissure length could have supported approximately 36 explosive events/phases, each with a duration of 3-4 days. Each 5 km fissure segment could have emitted 62 Mt of SO2 per day into the stratosphere while actively fountaining, the equivalent of about three 1991 Mount Pinatubo eruptions per day. Each fissure segment could have had one to several vents, which subsequently produced lava without significant fountaining for a longer period within the decades-long eruption. Sensitivity of plume rise height to ancient atmospheric conditions is explored. Although eruptions in the Deccan Traps (approximately 66 Ma) may have generated buoyant plumes that rose to altitudes in excess of 18 km, they may not have reached the stratosphere because the tropopause was substantially higher in the late Cretaceous. Our results indicate that some flood basalt eruptions, such as Roza, were capable of repeatedly injecting large masses of SO2 into the stratosphere. Thus sustained flood basalt eruptions could have influenced climate on time scales of decades to centuries but the location (i.e., latitude) of the province and relevant paleoclimate is important and must be considered.

climate↗
NASA NTRS2017

An ISRU Propellant Production System to Fully Fuel a Mars Ascent Vehicle

In-Situ Resource Utilization (ISRU) will enable the long term presence of humans beyond low earth orbit. Since 2009, oxygen production from the Mars atmosphere has been baselined as an enabling technology for Mars human exploration by NASA. However, using water from the Martian regolith in addition to the atmospheric CO2 would enable the production of both liquid Methane and liquid Oxygen, thus fully fueling a Mars return vehicle. A case study was performed to show how ISRU can support NASA's Evolvable Mars Campaign (EMC) using methane and oxygen production from Mars resources. A model was built and used to generate mass and power estimates of an end-to-end ISRU system including excavation and extraction water from Mars regolith, processing the Mars atmosphere, and liquefying the propellants. Even using the lowest yield regolith, a full ISRU system would weigh 1.7 mT while eliminating the need to transport 30 mT of ascent propellants from earth.

Mars Surface↗
NASA NTRS2017

Surveying Clay Mineral Diversity in the Murray Formation, Gale Crater, Mars

One of the primary science goals of Mars Science Laboratory (MSL) is to investigate layered clay mineral-bearing deposits outcropping in the lower NW slopes of Aeolis Mons (Mt. Sharp) detected from orbit. Martian clay mineral-bearing layered rocks are of particular interest because they are potential markers of sedimentary deposits formed in habitable aqueous environments. The CheMin X-ray diffraction (XRD) instrument aboard MSL has documented clay minerals in various drill samples during its traverse of Gale Crater's floor and ascent of Mt. Sharp. Previously, the high concentrations of clay minerals (approximately 20 wt.%) detected in drill powders of mudstone (Sheepbed member) at Yellowknife Bay (YKB) allowed their detailed characterization. Drill powders recovered from lacustrine mudstones of the Sheepbed member at YKB contain smectite clay minerals. Based on the position of 02l reflections in XRD patterns, which serve as an indicator of octahedral occupancy, the smectites are Fe-bearing, trioctahedral species analogous to ferrian saponites from terrestrial deposits. The smectites are thought to have been formed through a process of isochemical aqueous alteration of detrital olivine close to the time of sediment deposition under anoxic to poorly oxidizing conditions. The clay minerals are key indicators that the lake waters were benign and habitable at the time. Clay minerals were detected at other locations during MSL's traverse, including samples from the Pahrump Hills, but lower abundances and overlapping peaks from crystalline phases in XRD patterns hamper in-depth analysis.

Bristow, T. F.↗
NASA NTRS2017

Solar System Exploration Augmented by In-Situ Resource Utilization: Human Planetary Base Issues for Mercury and Saturn

Establishing a lunar presence and creating an industrial capability on the Moon may lead to important new discoveries for all of human kind. Historical studies of lunar exploration, in-situ resource utilization (ISRU) and industrialization all point to the vast resources on the Moon and its links to future human and robotic exploration. In references 1 through 9, a broad range of technological innovations are described and analyzed. Figures 1 depicts program planning for future human missions throughout the solar system which included lunar launched nuclear rockets, and future human settlements on the Moon. Figures 2 and 3 present the results for human Mercury missions, including LEO departure masses and round trip Mercury lander masses. Using in-situ resources, the missions become less burdensome to the LEO launch infrastructure. In one example using Mercury derived hydrogen, the LEO mass of the human Mercury missions can be reduced from 2,800 MT to 1,140 MT (Ref. 15). Additional analyses of staging options for human Mercury missions will be presented. Figures 4 shows an option for thermal control for long term in-space cryogenic storage and Figure 5 depicts the potentially deleterious elements emanating from Mercury that must be addressed, respectively. Updated analyses based on the visions presented will be presented. While advanced propulsion systems were proposed in these historical studies, further investigation of nuclear options using high power nuclear thermal and nuclear electric propulsion as well as advanced chemical propulsion can significantly enhance these scenarios. Human bases at Mercury may have to be resupplied from resources from regolith and water resources in permanently shadowed craters at its northern pole.

Mercury↗
NASA NTRS2017

Surveying Clay Mineral Diversity in the Murray Formation, Gale Crater, Mars

The CheMin XRD instrument aboard Mars Science Laboratory (MSL) has documented clay minerals in various drill samples during its traverse of Gale Crater's floor and ascent of Mt. Sharp. The most recent samples, named Marimba, Quela and Sebina were acquired from the Murray Formation in the Murray Buttes region of lower Mt. Sharp. Marimba and Quela come from a approx. 30 m package of finely laminated lacustrine mudstones. Sebina comes from an overlying package of heterolithic mudstone-sandstones. Clay minerals make up approx.15-25 wt.% of the bulk rock with similar contributions to XRD patterns in all three samples. Broad basal reflections at approx. 10deg 2(theta) CoK(alpha) indicate the presence of 2:1 group clay minerals. The 02(lambda) clay mineral band lies at approx. 22.9deg 2(theta), a region typically occupied by Fe-bearing dioctahedral 2:1 clay minerals like nontronite or Fe-illite. The low humidity within the CheMin instrument, which is open to the martian atmosphere, promotes loss of interlayer H2O and collapse of smectite interlayers making them difficult to distinguish from illites. However, based on the low K content of the bulk samples, it appears that smectitic clay minerals are dominant. Peak dehydroxylation of the Marimba sample measured by the SAM instrument on MSL occurred at 610C and 780C. Fe-bearing smectites are not consistent with these dehydroxylation temperatures. Thus, we suggest that a mixture of dioctahedral and trioctahedral smectite phases are present giving the appearance of intermediate octahedral occupancy in XRD. Dioctahedral smectites have not previously been reported in Gale Crater by MSL. Earlier in the mission, relatively clay mineral rich samples (approx. 20 wt.%) from lacustrine mudstones in Yellowknife Bay (YKB) were found to contain ferrian saponites. It is proposed that YKB saponites formed via isochemical aqueous alteration of detrital olivine close to the time of sediment deposition, under anoxic to poorly oxidizing conditions. In terrestrial settings where alteration sequences of basaltic rocks or sediments are observed, first-stage alteration clay minerals are typically trioctahedral smectite species, as reported from YKB. In later alteration stages trioctahedral clay minerals are replaced by dioctahedral clays as a result of removal and/or oxidation of Fe2+ and Mg. Observed changes in clay mineralogy between YKB and Murray Buttes samples correspond with differences in bulk mineralogy, including: 1) a transition from magnetite to hematite as the main Fe-oxide, 2) increasing abundances of Ca-sulfates and 3) a reduction in the quantity of reactive mafic minerals. This mineralogical change indicates an increasing degree of aqueous alteration and oxidation of mafic detritus in the upper part of the Murray Formation. These results broaden the spectrum of mineralogical facies documented by MSL. Together sedimentology and mineralogy indicate a long-lasting, dynamic fluvial-lacustrine system encompassing a range aqueous geochemical processes under varying redox conditions. Future work is needed to unravel the influence of global and local controls on the range of ancient conditions observed at Gale Crater.

MSL↗
NASA NTRS2017

Mineralogical Results from the Mars Science Laboratory Rover Curiosity

NASA's CheMin instrument, the first X-ray Diffractometer flown in space, has been operating on Mars for nearly five years. CheMin was first to establish the quantitative mineralogy of the Mars global soil (1). The instrument was next used to determine the mineralogy of a 3.7 billion year old lacustrine mudstone, a result that, together with findings from other instruments on the MSL Curiosity rover, documented the first habitable environment found on another planet (2). The mineralogy of this mudstone from an ancient playa lake was also used to derive the maximum concentration of CO2 in the early Mars atmosphere, a surprisingly low value that calls into question the current theory that CO2 greenhouse warming was responsible for the warm and wet environment of early Mars. CheMin later identified the mineral tridymite, indicative of silica-rich volcanism, in mudstones of the Murray formation on Mt. Sharp. This discovery challenges the paradigm of Mars as a basaltic planet and ushers in a new chapter of comparative terrestrial planetology (3). CheMin is now being used to systematically sample the sedimentary layers that comprise the lower strata of Mt. Sharp, a 5,000 meter sequence of sedimentary rock laid down in what was once a crater lake, characterizing isochemical sediments that through their changing mineralogy, document the oxidation and drying out of the Mars in early Hesperian time.

Mars mineralogy↗
NASA NTRS2017

Update on Risk Reduction Activities for a Liquid Advanced Booster for NASA's Space Launch System

Goals of NASA's Advanced Booster Engineering Demonstration and/or Risk Reduction (ABEDRR) are to: (1) Reduce risks leading to an affordable Advanced Booster that meets the evolved capabilities of SLS. (2) Enable competition by mitigating targeted Advanced Booster risks to enhance SLS affordability. SLS Block 1 vehicle is being designed to carry 70 mT to LEO: (1) Uses two five-segment solid rocket boosters (SRBs) similar to the boosters that helped power the space shuttle to orbit. Evolved 130 mT payload class rocket requires an advanced booster with more thrust than any existing U.S. liquid-or solid-fueled boosters

Crocker, Andy↗
NASA NTRS2018

P43K-3884 Characterizing Martian Crater Circulations with the NASA Ames Mars GCM

Observations made in Gale Crater by instruments on the MSL Curiosity Rover show that the diurnal amplitude of the surface pressure is increased and the depth of the Convective Boundary Layer (CBL) is decreased relative to other lander locations on flatter regions of Mars (Haberle et al., 2014; Moores et al., 2015). Mesoscale modeling studies of Gale Crater suggest that crater circulations produce these effects. Tyler & Barnes (2013) show that local upslope/downslope flows along the crater rim and Mt. Sharp amplify the diurnal pressure cycle. These same flows are thought to be at least partly responsible for the suppression of the CBL because upward air flow at the rim and in the center (due to Mt. Sharp) forces subsidence over the lowest regions of the crater during the day. Regional flows, largely due to the location of Gale near the dichotomy boundary, may also play a role in shaping the circulation internal to the crater. Whether the behavior of the CBL and the amplified diurnal pressure cycle are phenomena observed in craters morphologically different from Gale (i.e. bowl-shaped, irregular, degraded) is not yet understood. We will explore these questions by characterizing the behavior of these processes as they are shaped by the morphology of craters greater than 100 km in diameter. We use the NASA Ames Mars Global Circulation Model (GCM) that now utilizes the NOAA/GFDL cubed-sphere finite-volume dynamical core to examine ~100 craters of varying size and shape from a database of known Martian craters (Robbins & Hynek, 2014). Run at 7.5 km resolution, the GCM is capable of resolving surface winds, temperature, and pressure inside craters of this size allowing for the analysis of dozens of craters simulated at various seasons and within the context of synoptic and global-scale phenomena.

Batterson, Courtney MaryLou↗
NASA NTRS2019

Nasa GeneLab Computomics Reveal Horizontal Gene Transfer on International Space Station Environmental Metagenomes

Prokaryotic lifeforms can be observed to demonstrate many keen adaptive advantages, perhaps facilitated by a nature simplistic relative to divergent domains of life. In particular, decompartmentalized gene expression facilitates adaptation by allowing free exchange of genetic material, albeit at the cost of increased susceptibility to genetic damage. Thus, these lifeforms must compensate by embracing diverse investment strategies in an attempt to “brute force” the evolvability equation through precipitous genesis, lean metabolic efficiency, and sheer population. This prokaryotic archetype also enables symbiotic relationships with secondary mobile genetic elements known as plasmids, which have been shown to drive evolution on rapid temporal scales through processes such as conjugation and transformation. This study attempts to decipher whether these mechanisms of horizontal gene transfer (HGT) are major factors in determining prokaryote fitness within a unique isolated environment, the International Space Station (ISS). The ISS Microbial Tracking (MT) project has generated a wealth of data concerning the successive reigns of microbial genera that appear to thrive amidst harsh conditions for life. Despite relatively higher doses of ionizing radiation as compared to Earth, complications associated with microgravity, and the anti-microbial mélange deployed, microbial life still persists in this environment. The NASA GeneLab serves as a data repository and analysis platform to enable researchers to access space flight factor related data. With the use of GeneLab’s modern computational suites (computomics), phylogenetic and functional genomic investigations of HGT events were conducted on the data generated from the MT-1 project. The putative data concerning the plasmid population (plasmidome) of the ISS was algorithmically derived and compared to those of habitats with similar environmental dynamics- such as living quarters and hospitals- to investigate whether these HGT elements may play crucial role(s) in shaping the microbiome of this closed habitat that serves as the only inhabited structure in space.

Bense, Nicholas↗
NASA NTRS2020

First Gale Western Butte Capping-Unit Compositions, and Relationships to Earlier Units Along Curiosity's Traverse

The Curiosity rover has been traversing through the clay-bearing unit (Glen Torridon; GT), approaching Greenheugh pediment, a large, fan-shaped surface surrounding the mouth of Gediz Vallis on the lower slope of Mt. Sharp. The pediment unconformably overlies the underlying bedrock, and is hence younger than units of the Mt. Sharp group. Orbital imaging of the pediment has shown it to have a slightly lower albedo and higher thermal inertia than neighboring units, to be relatively retentive of craters (e.g., erosion resistant), and to exhibit curved bedforms suggestive of lithified eolian bedforms. No diagnostic spectral signature has been observed from orbit. Recent rover positions allowed remote imaging of the contact between Greenheugh pediment and the eroded Murray formation strata below it, showing that the pediment capping material is cross-bedded and relatively thin (1-3 m), and suggesting that the pediment may have been much larger at one time. As Curiosity approached the edge of the pediment, the team investigated two buttes named Central and Western. The latter butte contains dark capping material that initially looked similar to the pediment cap, but close inspection revealed important physical differences. Here we report on compositions from ChemCam of two float rocks that appear to have rolled down from the capping unit, and on potential relation-ships to other targets along the traverse of the rover.

Wiens, R. C.↗
NASA NTRS2020

The Role of Diagenesis at Vera Rubin Ridge in Gale Crater, Mars, and the Chemostratigraphy of the Murray Formation as Observed by the Chemcam Instrument

The Mars Science Laboratory (MSL) Curiosity rover explored Vera Rubin ridge (VRR) in Gale crater, Mars, for almost 500 sols (Mars days) between arriving at the ridge on sol 1809 of the mission in September 2017 and leaving it on sol 2302 upon entering the Glen Torridon area south of the ridge. VRR is a topographic ridge on the central mound, Aeolis Mons (Mt. Sharp), in Gale crater that displays a strong hematite spectral signature from orbit. In-situ observations on the ridge led to the recognition that the ridge-forming rocks belong to the Murray formation, the lowermost exposed stratigraphic unit of the Mt. Sharp group, that was first encountered at the Pahrump Hills location. Including VRR rocks, the Murray formation, interpreted to be primarily deposited in an ancient lacustrine environment in Gale crater, is more than 300 m thick. VRR itself is composed of two stratigraphic members within the Murray formation, the Pettegrove Point member overlain by the Jura member. The Pettegrove Point member overlies the Blunts Point member of the Murray formation. Areas of gray coloration are observed in the Jura member predominantly, but also in the Pettegrove Point member. Generally, gray areas are found in local topographic depressions, but contacts between red and gray rocks crosscut stratigraphy. Additionally, cm-scale dark concretions with very high iron-content are commonly observed in gray rocks, typically surrounded by a lighttoned zone that is conversely depleted in iron. A key goal for the VRR campaign was to characterize geochemical variations in the ridge-forming rocks to investigate the role of primary and diagenetic controls on the geochemistry and morphology of VRR. Here, we present observations by the ChemCam instrument on VRR and compare these to the full Murray formation chemostratigraphy. This work was recently submitted to a special issue of JGRPlanets that detail the full VRR campaign.

Frydenvang, J.↗
NASA NTRS2019

Impacts of the Mount Pinatubo eruption on ENSO in the GEOS seasonal-to-subseasonal forecasting system

The eruption of Mount Pinatubo in June 1991 introduced a perturbation of the Earth's global energy budget by increasing the stratospheric aerosol loading by an order of magnitude, with effects on the global climate. In this presentation we analyze the effects of the Mt. Pinatubo eruption on the seasonal forecast performed with Goddard Earth Observing System Seasonal-to Subseasonal (GEOS-S2S) system, an Earth System Model that includes an interactive ocean and a bulk aerosol model coupled to radiation. We performed 10-member ensembles for the year after the eruption (June 1991-May 1992) at ~0.5 horizontal resolution, with and without the inclusion of the Mt. Pinatubo eruption. In GEOS-S2S, the eruption leads to ta strengthening of El Nino peaking in January 1992. The strengthening is mainly due to the weakening of the trade winds, which is caused by a attening of the temperature gradient across the Pacic due to a differential response to the volcanic forcing between the central and eastern Pacic (ocean-dynamical thermostat). This response largely depends on the assumed size for the volcanic aerosols. Indeed, we performed simulations assuming a volcanic aerosol effective radius of 0.35 m (similar to tropospheric aerosol, and the default in GEOS) and 0.6 m (closer to observations of volcanic aerosol from Pinatubo-sized eruptions). We nd that in the latter case the tropical radiative forcing is lower, since smaller aerosols scatter shortwave radiation more eciently than larger ones. Accordingly, the impact on ENSO is not statistically signicant when a larger and more realistic particle radius is assumed.

Aquila, Valentina↗
NASA NTRS2019

Developments on Low Cost Manufacturing Methods for Cylindrical Launch Vehicle Structures

Due to the increasing international competition and growing pressure to lower the cost of launch vehicles, enhanced technologies and competences for efficient, low cost manufacturing have to be developed. In this paper, an innovative manufacturing technology for launch vehicle applications is presented that was developed over the last few years at MT Aerospace AG (MTA) in collaboration with NASA Langley Research Center, the European Space Agency (ESA), Lockheed Martin Corporation (LMCO), Leifeld Metal Spinning and Scot Forge. The Integrally Stiffened Cylinder (ISC) manufacturing method was first investigated in 2010. Early results indicated a high mass saving potential for cylindrical structures for launch vehicle systems, such as cryogenic tank barrels and intertanks, produced using the ISC method. Cost-benefit studies conducted at NASA and MTA estimated up to 50% reduction in manufacturing costs is possible compared to conventional multi-piece, welded fabrication methods. Associated reductions in manufacturing lead times have shown that a 40% faster production rate is possible by the ISC process. Following proof of concept and process development efforts, a cylindrical structure manufactured using the ISC method had its maiden flight in 2015 on a Black Brant sounding rocket at NASA Wallops Flight Facility. Further collaboration between ESA, NASA, MTA, LMCO, and Scot Forge led to manufacturing test campaigns at MT Aerospace in 2017 and 2018 that successfully demonstrated ISC fabrication at a scale representative of commercial launch vehicles. This paper summarizes the status and relevant results of the development sequence of the ISC cylinder manufacturing method. Results of cost / benefit and structural performance analyses are also summarized. Moreover, an outlook will be given on further planned activities and development steps.

Martin Stachulla↗
NASA NTRSDate not supplied

Calculating the Height of Volcanic Cloud SO2 With a Lagrangian Trajectory Tool: Raikoke (2019) and Pinatubo (1991) Cases

We have developed a new data analysis tool to reconstruct the altitude of SO2 clouds ejected by avolcanic eruption. Starting with 2D fields of satellite observed SO2 column density, known volcanolocation, and reanalysis wind fields, the Goddard Lagrangian trajectory tool allows us to estimatethe altitude and local concentration of SO2 at the time of observation. We demonstrate this tool forthe June 21, 2019 Mt. Raikoke eruption (8h, 30h and 78 hours after eruption). We use SO2 data fromthe Ozone Mapping and Profiler Suite/Nadir Mapper (OMPS/NM) onboard the NASA-NOAASuomi National Polar Partnership satellite and the Tropospheric Monitoring Instrument(TROPOMI) onboard the European Copernicus Sentinel 5 precursor satellite and wind fields fromthe NASA Goddard Earth Observing System (GEOS) model. We obtained a wide distribution ofSO2 altitudes between 1 and 19 kilometers in different parts of the Raikoke SO2 clouds, with thehighest SO2 concentration between 11 and 16 km, in good agreement with data from independentSO2 layer height retrievals from TROPOMI and Infrared Atmospheric Sounding Interferometer(IASI). We then applied this method to the June 15, 1991 Mt. Pinatubo eruption using SO2 columnmeasurements from the NASA Total Ozone Mapping Spectrometer (TOMS) on June 16, 17, 18 andusing wind fields from the National Centers for Environmental Prediction Reanalysis version 2. Weobtained a wide distribution of SO2 heights from 6 km up to 30 km in the northern part of the cloud.We use our new trajectory tool to reconstruct volcanic SO2/aerosol emission sources as functions oftime and altitude, providing inputs to the GEOS model aerosol and chemistry schemes in order tosimulate the dispersion of volcanic SO2 and aerosol clouds from these events.

SO2↗
NASA NTRS2020

Stratospheric Impact on the Northern Hemisphere Winter and Spring Ozone Interannual Variability in the Troposphere

In this study we use ozone and stratospheric ozone tracer simulations from the high-resolution (0.5°x0.5°) Goddard Earth Observing System, Version 5 (GEOS-5) in a replay mode to study the impact of stratospheric ozone on tropospheric ozone interannual variability (IAV). We use these simulations in conjunction with ozone sonde measurements from 1990 to 2016 during the winter and spring seasons. The simulations include a stratospheric ozone tracer (StratO3) to aid 15in the evaluation of the impact of stratospheric ozone IAV on the IAV of tropospheric ozone at different altitudes and location. The model is in good agreement with the observed interannual variation of tropospheric ozone, except for the post-Pinatubo period(1992-1994)over the region of North America. Ozone sonde data show a negative ozone anomaly in 1992-1994 following the Pinatubo eruption, with recovery thereafter. The simulated anomaly is only half the magnitude of that observed. Our analysis suggests that the simulated Stratosphere-troposphere exchange (STE)flux deduced from the analysis 20might be too strong over the North American (50°N-70°N) region after the Mt. Pinatubo eruption in the early 1990s,maskingthe impact of lower stratospheric ozone concentration on tropospheric ozone. European ozone sonde measurements show a similar but weaker ozone depletion after the Mt. Pinatubo eruption, which is fully reproduced by the model. Analysis based on the stratospheric ozone tracer (StratO3) identifies differences in strength and vertical extent of stratospheric ozone impact on the tropospheric ozone interannual variation (IAV)between North America and Europe. Over NorthAmerica25stations, the StratO3IAV has a significant impact on tropospheric ozone from the upper to lower troposphere and explains about 60% and 66% of the simulated ozone IAV at 400 hPa, and ~11% and 34% at 700 hPa in winter and spring respectively. Over European stations, the influence is limited to the middle to upper troposphere, and becomes much smaller at 700 hPa. The Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2)assimilated fields exhibit strong longitudinal variations over northern hemisphere (NH) mid-high latitudes, with lower tropopause height and 30lower geopotential height over North America than Europe. These variations associated with the relevant variations in the location of tropospheric jet flows are responsible for the longitudinal differences in the stratospheric ozone impact, with stronger effects over North America than over Europe

tropospheric ozone IAV, Model, ozonesonde, stratos↗
NASA NTRS2020

Chandra and XMM-Newton Observations of A2256: Cold Fronts, Merger Shocks, and Constraint on the IC Emission

We present the results of deep Chandra and XMM-Newton observations of a complex merging galaxy cluster Abell 2256 (A2256) that hosts a spectacular radio relic (RR). The temperature and metallicity maps show clear evidence of a merger between the western subcluster (SC) and the primary cluster (PC). We detect five X-ray surface brightness edges. Three of them near the cluster center are cold fronts (CFs): CF1 is associated with the infalling SC; CF2 is located in the east of the PC; and CF3 is to the west of the PC core. The other two edges at cluster outskirts are shock fronts(SFs): SF1 near the RR in the NW has Mach numbers derived from the temperature and the density jumps, respectively, of MT=1.62±0.12 and Mρ=1.23±0.06; SF2 in the SE has MT=1.54±0.05 and Mρ=1.16±0.13. In the region of the RR, there is no evidence for the correlation between X-ray and radio substructures, from which we estimate an upper limit for the inverse-Compton emission, and therefore set a lower limit on the magnetic field (∼450 kpc from PC center) of B>1.0μG for a single power-law electron spectrum or B>0.4μG for a broken power-law electron spectrum. We propose a merger scenario including a PC, an SC, and a group. Our merger scenario accounts for the X-ray edges, diffuse radio features, and galaxy kinematics, as well as projection effects.

Chong Ge↗
NASA NTRS2020

Chandra and XMM-Newton Observations of A2256: Cold Fronts, Merger Shocks, and Constraint on the IC Emission

We present the results of deep Chandra and XMM-Newton observations of a complex merging galaxy cluster Abell 2256 (A2256) that hosts a spectacular radio relic (RR).The temperature and metallicity maps show clear evidence of a merger between the western subcluster (SC) and the primary cluster (PC). We detect five X-ray surface brightness edges. Three of them near the cluster center are cold fronts (CFs): CF1is associated with the infalling SC; CF2 is located in the east of the PC; and CF3 is to the west of the PC core. The other two edges at cluster outskirts are shock fronts(SFs): SF1 near the RR in the NW has Mach numbers derived from the temperature and the density jumps, respectively, of MT=1.62±0.12andMρ=1.23±0.06; SF2 in the SE has MT=1.54±0.05andMρ=1.16±0.13. In the region of the RR, there is no evidence for the correlation between X-ray and radio substructures, from which we estimate an upper limit for the inverse-Compton emission, and therefore set a lower limit on the magnetic field (∼450 kpc from PC center) of B>1.0μG for a single power-law electron spectrum or B>0.4μG for a broken power-law electron spectrum. We propose a merger scenario including a PC, an SC, and a group. Our merger scenario accounts for the X-ray edges, diffuse radio features, and galaxy kinematics, as well as projection effects.

Chong Ge↗