Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MODE CONVERSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Intense terahertz radiation from relativistic laser–plasma interactions

The development of tabletop intense terahertz (THz) radiation sources is extremely important for THz science and applications. This study presents our measurements of intense THz radiation from relativistic laser–plasma interactions under different experimental conditions. Several THz generation mechanisms have been proposed and investigated, including coherent transition radiation (CTR) emitted by fast electrons from the target rear surface, transient current radiation at the front of the target, and mode conversion from electron plasma waves (EPWs) to THz waves. Finally, the results indicate that relativistic laser plasma is a promising driver of intense THz radiation sources.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Power transport efficiency during O-X-B 2nd harmonic electron cyclotron heating in a helicon linear plasma device

The principal objective of this work is to report on the power coupled to a tungsten target in the prototype-material plasma exposure experiment device during oblique injection of a microwave beam (<70 kW at 28 GHz) into a high-power (~100 kW at 13.56 MHz) over-dense (${n_e} > 1 \times {10^{19}}{\text{ }}{{\text{m}}^{ - 3}}$) deuterium helicon plasma column. The experimental setup, electron heating system, electron heating scheme, and IR thermographic diagnostic for quantifying the power transport is described in detail. It is demonstrated that the power transported to the target can be effectively controlled by adjusting the magnetic field profile. Using this method, heat fluxes up to 22 MW m -2 and power transport efficiencies in the range of 17%–20% have been achieved using 70 kW of microwave power. It is observed that most of the heat flux is confined to a narrow region at the plasma periphery. Ray-tracing calculations are presented which indicate that the power is coupled to the plasma electrons via an O-X-B mode conversion process. Calculations indicate that the microwave power is absorbed in a single pass at the plasma periphery via collisions and in the over-dense region via 2nd harmonic cyclotron resonance of the electron Bernstein wave. The impact of our results is discussed in the context of MPEX.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of waves in the lower-hybrid frequency range in the scrape-off layer plasma of Alcator C-Mod

We report polarization resolved measurements of the parallel refractive index $N_∥≡ck_∥/w$ of the driven RF waves in the lower hybrid (LH) range of frequencies are performed using arrays of RF magnetic probes in the scrape-off layer plasma of Alcator C-Mod. The measured $N_∥$ of the RF magnetic field component parallel to the background magnetic field is about –1.6, which corresponds to the peak of the launched LH $N_∥$ spectrum. Based on the wave dispersion relationship, this wave is identified as the LH slow wave. On the other hand, the RF magnetic field component perpendicular to the magnetic field is found to have a lower $N_∥$ of –1.2, and is detected only near the last closed flux surface. This wave is identified as the LH fast wave generated by slow-fast wave mode conversion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quasioptical propagation and absorption of electron cyclotron waves: simulations and experiment

Electron-cyclotron resonance heating is an essential tool for manipulating fusion plasmas and has been diligently studied for decades through numerical simulations and experiments. Here, we report the first comparison of simulations using the quasioptical code PARADE (PAraxial RAy DEscription) with experiments using a target-plate system on the Large Helical Device. We find that the numerical and experimental results agree qualitatively, which makes PARADE a promising code for modeling of electron-cyclotron wave beams in future experiments. The signature advantage of PARADE is its ability to capture both mode conversion and inhomogeneity of the dissipation rate across the beam cross section. Accounting for these effects, which can noticeably affect the power deposition, significantly improves the agreement between numerical results and experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Argon pumpout by ICRF waves in C-Mod L- and I-mode plasmas

Pumpout of argon ions by ICRF waves has been observed in C-Mod deuterium L- and I-mode plasmas that had a substantial hydrogen fraction. The effect is manifested by a reduction of core argon x-ray brightness up to a factor of 90% on time scales of tens of milliseconds following injection of ICRF power. For Ar 16+ , the pumpout is strongest for hydrogen minority concentrations between 0.25 and 0.4, when the ICRF waves are not expected to result in minority heating. Modeling with the TORIC code suggests that the pumpout process occurs when the H/D mode conversion layer overlaps with the 2nd harmonic impurity resonance layer. Here, the magnitude of the argon pumpout is independent of ICRF power above an apparent threshold of ~500 kW, independent of electron density and appears to decrease as the plasma current is increased. Potential application as a heavy impurity control tool in reactors is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Observations of Turbulence Generated by Magnetic Reconnection

Spacecraft observations of turbulence within a magnetic reconnection (guide field {approx}0) ion diffusion region are presented. In the inertial subrange, electric and magnetic fluctuations both followed a -5/3 power law; at higher frequencies, the spectral indices were -1 and -8/3, respectively. The dispersion relation was found to be consistent with fast-mode-whistler waves rather than kinetic Alfven-ion cyclotron waves. Lower hybrid waves, which could be enhanced by whistler mode conversion, were observed, but the associated anomalous resistivity was not found to significantly modify the reconnection rate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear simulations of beam-driven Compressional Alf&eacute;n Eigenmodes in NSTX

Results of 3D nonlinear simulations of neutral-beam-driven compressional Alfv&eacute;n eigenmodes (CAEs) in the National Spherical Torus Experiment (NSTX) are presented. Hybrid MHD-particle simulations for the H-mode NSTX discharge (shot 141398) using the HYM code show unstable CAE modes for a range of toroidal mode numbers, n=4-9, and frequencies below the ion cyclotron frequency. It is found that the essential feature of CAEs is their coupling to kinetic Alfv&eacute;n wave (KAW) that occurs on the high-field side at the Alfv&eacute;n resonance location. High-frequency Alfv&eacute;n eigenmodes are frequently observed in beam-heated NSTX plasmas, and have been linked to flattening of the electron temperature profiles at high beam power. Coupling between CAE and KAW suggests an energy channeling mechanism to explain these observations, in which beam-driven CAEs dissipate their energy at the resonance location,therefore significantly modifying the energy deposition profile. Nonlinear simulations demonstrate that CAEs can channel the energy of the beam ions from the injection region near the magnetic axis to the location of the resonant mode conversion at the edge of the beam density profile. A set of nonlinear simulations show that the CAE instability saturates due to nonlinear particle trapping, and a large fraction of beam energy can be transferred to several unstable CAEs of relatively large amplitudes and absorbed at the resonant location. Absorption rate shows a strong scaling with the beam power.

Compressional Alfven Eigenmodes↗

The Relative Importance of Assumed Infrasound Source Terms and Effects of Atmospheric Models on the Linear Inversion of Infrasound Time Series at the Source Physics Experiment

We invert far-field infrasound data for the equivalent seismoacoustic time-domain moment tensor to assess the effects of variable atmospheric models and source phenomena. The infrasound data were produced by a series of underground chemical explosions that were conducted during the Source Physics Experiment (SPE), which was originally designed to study seismoacoustic signal phenomena. The first goal is to investigate the sensitivity of the inversion to the variability of the estimated atmospheric model. The second goal is to determine the relative contribution of two presumed source mechanisms to the observed infrasonic wavefield. Rather than using actual atmospheric observations to estimate the necessary atmospheric Green’s functions, we build a series of atmospheric models that rely on publicly available, regional-scale atmospheric observations. The atmospheric observations are summarized and interpolated onto a 3D grid to produce a model of sound speed at the time of the experiment. For each of four SPE acoustic datasets that we invert, we produced a suite of three atmospheric models for each chemical explosion event, based on 10 yrs of meteorological data: an average model, which averages the atmospheric conditions for 10 yrs prior to each SPE event, as well as two extrema models. To parameterize the inversion, we assume that the source of infrasonic energy results from the linear combination of explosion-induced surface spall and linear seismic-to-elastic mode conversion at the Earth’s free surface. We find that the inversion yields relatively repeatable results for the estimated spall source. Conversely, the estimated isotropic explosion source is highly variable. This suggests that 1) the majority of the observed acoustic energy is produced by the spall and/or 2) our modeling of the elastic energy, and the subsequent conversion to acoustic energy, is too simplistic.

58 GEOSCIENCES↗

EBW Physics of ECE in NSTX

Topics covered include: ray tracing and Fokker-Planck coupling; relativistic and electromagnetic effects in EBW damping (ray-tracing); O-X-EBW mode conversion efficiency limit due to finite beam divergence; general prospects for electron Bernstein wave heating and current drive in spherical tokamaks; sensitivity of EBW H&CD; collisional effects on EBW coupling; and EBW propagation in a high-temperature plasma.

14 SOLAR ENERGY↗

High-Power Microwave Switch Employing Electron Beam Triggering

A high-power active microwave pulse compressor is described that modulates the quality factor Q of the energy storage cavity by a new means involving mode conversion controlled by a triggered electron-beam discharge through a switch cavity. The electron beam is emitted from a diamond-coated molybdenum cathode. This report describes the principle of operation, the design of the switch, the configuration used for the test, and the experimental results. The pulse compressor produced output pulses with 140 - 165 MW peak power, power gain of 16 - 20, and pulse duration of 16 - 20 ns at a frequency of 11.43 GHz.

43 PARTICLE ACCELERATORS↗

High-Current Cold Cathode Employing Diamond and Related Materials

The essence of this project was for diamond films to be deposited on cold cathodes to improve their emission properties. Films with varying morphology, composition, and size of the crystals were deposited and the emission properties of the cathodes that utilize such films were studied. The prototype cathodes fabricated by the methods developed during Phase I were tested and evaluated in an actual high-power RF device during Phase II. These high-power tests used the novel active RF pulse compression system and the X-band magnicon test facility at US Naval Research Laboratory. In earlier tests, plasma switches were employed, while tests under this project utilized electron-beam switching. The intense electron beams required in the switches were supplied from cold cathodes embodying diamond films with varying morphology, including uncoated molybdenum cathodes in the preliminary tests. Tests with uncoated molybdenum cathodes produced compressed X-band RF pulses with a peak power of 91 MW, and a maximum power gain of 16.5:1. Tests were also carried out with switches employing diamond coated cathodes. The pulse compressor was based on use of switches employing electron beam triggering to effect mode conversion. In experimental tests, the compressor produced 165 MW in a ~ 20 ns pulse at ~18× power gain and ~ 140 MW at ~ 16× power gain in a 16 ns pulse with a ~ 7 ns flat-top. In these tests, molybdenum blade cathodes with thin diamond coatings demonstrated good reproducible emission uniformity with a 100 kV, 100 ns high voltage pulse. The new compressor does not have the limitations of earlier types of active pulse compressors and can operate at significantly higher electric fields without breakdown.

36 MATERIALS SCIENCE↗

The Relative Importance of Assumed Infrasound Mechanisms on the Linear Inversion of Infrasound Time Series at the Source Physics Experiment

We invert far field infrasound data for the equivalent seismo-acoustic time domain moment tensor to assess the relative importance of two assumed seismoacoustic source mechanisms. The infrasound data were produced by a four of the underground chemical explosions that were conducted during the Source Physics Experiment (SPE). For each SPE event that we invert, we produce three set of atmospheric Green's functions: an average model based on ten years of atmospheric data, as well as two extrema models designed to maximize the variability of atmospheric conditions for the given time-of-day and day-of-year for each SPE event. To parameterize the inversion, we assume that the source of infrasonic energy results from the linear combination of explosion-induced surface spall and linear seismic-to-elastic mode conversion at the Earth's free surface. We find that the inversion yields relatively repeatable results for the estimated spall source whereas the estimated isotropic explosion source is highly variable. This suggests that the majority of the observed acoustic energy is produced by the spall source and/or our modeling of the elastic energy propagation, and data are subsequent conversion to acoustic energy via linear elastic-to-acoustic coupling at the surface, is too simplistic.

58 GEOSCIENCES↗

Internal Gravity Waves in the Magnetized Solar Atmosphere. I. Magnetic Field Effects

Observations of the solar atmosphere show that internal gravity waves are generated by overshooting convection, but are suppressed at locations of magnetic flux, which is thought to be the result of mode conversion into magnetoacoustic waves. Here, we present a study of the acoustic-gravity wave spectrum emerging from a realistic, self-consistent simulation of solar (magneto)convection. A magnetic field free, hydrodynamic simulation and a magnetohydrodynamic (MHD) simulation with an initial, vertical, homogeneous field of 50 G flux density were carried out and compared with each other to highlight the effect of magnetic fields on the internal gravity wave propagation in the Sun’s atmosphere. We find that the internal gravity waves are absent or partially reflected back into the lower layers in the presence of magnetic fields and argue that the suppression is due to the coupling of internal gravity waves to slow magnetoacoustic waves still within the high- β region of the upper photosphere. The conversion to Alfvén waves is highly unlikely in our model because there is no strongly inclined magnetic field present. We argue that the suppression of internal waves observed within magnetic flux concentrations may also be due to nonlinear breaking of internal waves due to vortex flows that are ubiquitously present in the upper photosphere and the chromosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Argon Pumpout by ICRF Waves in C-Mod L- and I-mode Plasmas

Pumpout of argon ions by ICRF waves has been observed in C-Mod deuterium L- and I-mode plasmas that had a substantial hydrogen fraction. The effect is manifested by a reduction of core argon x-ray brightness up to a factor of 90% on time scales of tens of milliseconds following injection of ICRF power. For Ar^16+, the pumpout is strongest for hydrogen minority concentrations between 0.25 and 0.4, when the ICRF waves are not expected to result in minority heating. Modeling with the TORIC code suggests that the pumpout process occurs when the H/D mode conversion layer overlaps with the 2nd harmonic impurity resonance layer. The magnitude of the argon pumpout is independent of ICRF power above an apparent threshold of ~500 kW, independent of electron density and appears to decrease as the plasma current is increased. Potential application as a heavy impurity control tool in reactors is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Identification of waves in the lower-hybrid frequency range in the scrape-off layer plasma of Alcator C-Mod

Polarization resolved measurements of the parallel refractive index Nk ≡ ckk/ω of the driven RF waves in the lower hybrid (LH) range of frequencies are performed using arrays of RF magnetic probes in the scrape-off layer plasma of Alcator C-Mod. The measured Nk of the RF magnetic field component parallel to the background magnetic field is about -1.6, which corresponds to the peak of the launched LH Nk spectrum. Based on the wave dispersion relationship, this wave is identified as the LH slow wave. On the other hand, the RF magnetic field component perpendicular to the magnetic field is found to have a lower Nk of -1.2, and is detected only near the last closed flux surface. This wave is identified as the LH fast wave generated by slow-fast wave mode conversion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Users manual for the Variable dimension Automatic Synthesis Program (VASP)

A dictionary and some problems for the Variable Automatic Synthesis Program VASP are submitted. The dictionary contains a description of each subroutine and instructions on its use. The example problems give the user a better perspective on the use of VASP for solving problems in modern control theory. These example problems include dynamic response, optimal control gain, solution of the sampled data matrix Ricatti equation, matrix decomposition, and pseudo inverse of a matrix. Listings of all subroutines are also included. The VASP program has been adapted to run in the conversational mode on the Ames 360/67 computer.

White, J. S.↗

Program for computer aided reliability estimation

A computer program for estimating the reliability of self-repair and fault-tolerant systems with respect to selected system and mission parameters is presented. The computer program is capable of operation in an interactive conversational mode as well as in a batch mode and is characterized by maintenance of several general equations representative of basic redundancy schemes in an equation repository. Selected reliability functions applicable to any mathematical model formulated with the general equations, used singly or in combination with each other, are separately stored. One or more system and/or mission parameters may be designated as a variable. Data in the form of values for selected reliability functions is generated in a tabular or graphic format for each formulated model.

Mathur, F. P.↗

Nonlinear wave interaction in a plasma column

Two particular cases of nonlinear wave interaction in a plasma column were investigated. The frequencies of the waves were on the order of magnitude of the electron plasma frequency, and ion motion was neglected. The nonlinear coupling of slow waves on a plasma column was studied by means of cold plasma theory, and the case of a plasma column surrounded by an infinite dielectric in the absence of a magnetic field was also examined. Nonlinear scattering from a plasma column in an electromagnetic field having it's magnetic field parallel to the axis of the column was investigated. Some experimental results on mode conversion in the presence of loss are presented along with some observations of nonlinear scattering, The effect of the earth's magnetic field and of discharge symmetry on the radiation pattern are discussed.

Larsen, J.↗