Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD Instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Disruptions, Disruptivity, and Safer Operating Windows in the High-β Spherical Torus NSTX

This paper discusses disruption rates, disruption causes, and disruptivity statistics in the high- βN National Spherical Torus Experiment (NSTX) [M. Ono, et al. Nuclear Fusion 40, 557 (2000)]. While the overall disruption rate is rather high, configurations with high βN , moderate q*, strong boundary shaping, sufficient rotation, and broad pressure and current profiles are found to have the lowest disruptivity; active n=1 control further reduces the disruptivity. The disruptivity increases rapidly for q*<2.7, which is substantially above the ideal MHD current limit. In quiescent conditions, q min >1.25 is generally acceptable for avoiding the onset of core rotating n=1 kink/tearing modes; when EPM and ELM disturbances are present, the required q min for avoiding those modes is raised to ~1.5. The current ramp and early flat-top phase of the discharges are prone to n=1 core rotating modes locking to the wall, leading to a disruption. Small changes to the discharge fueling during this phase can often mitigate the rotation damping associated with these modes and eliminate the disruption. The largest stored energy disruptions are those that occur at high current when a plasma current rampdown is initiated incorrectly.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sensitivity to Error Fields in NSTX High β Plasmas

It was found that error field threshold decreases for high β in NSTX, although the density correlation in conventional threshold scaling implies the threshold would increase since higher β plasmas in our study have higher plasma density. This greater sensitivity to error field in higher β plasmas is due to error field amplification by plasmas. When the effect of amplification is included with ideal plasma response calculations, the conventional density correlation can be restored and threshold scaling becomes more consistent with low β plasmas. However, it was also found that the threshold can be significantly changed depending on plasma rotation. When plasma rotation was reduced by non-resonant magnetic braking, the further increase of sensitivity to error field was observed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic energy principle and neoclassical toroidal torque in tokamaks

It is shown that when tokamaks are perturbed the kinetic energy principle is closely related to the neoclassical toroidal torque by the action invariance of particles. Especially when tokamaks are perturbed from scalar pressure equilibria, the imaginary part of the potential energy in the kinetic energy principle is equivalent to the toroidal torque by the Neoclassical Toroidal Viscosity (NTV). A unified description therefore should be made for both physics. It is also shown in this case that the potential energy operator can be self-adjoint and thus the stability calculation can be simplified by minimizing the potential energy

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An Energy Principle for Ideal MHD Equilibria with Flows

In the standard ideal MHD energy principle for equilibria with no flows, the stability criterion, which is the defi niteness of the perturbed potential energy, is usually constructed from the linearized equation of motion. Equivalently while more straightforwardly, it can also be obtained from the second variation of the Hamiltonian calculated with proper constraints. For equilibria with flows, a stability criterion was proposed from the linearized equation of motion, but not explained as an energy principle1. In this paper, the second variation of the Hamiltonian is found to provide a stability criterion equivalent to, while more straightforward than, what was constructed from the linearized equation of motion. To calculate the variations of the Hamiltonian, a complete set of constraints on the dynamics of the perturbations is derived from the Euler-Poincare structure of the ideal MHD. In addition, a previous calculation of the second variation of the Hamiltonian was claimed to give a different stability criterion2, and in this paper we argue such a claim is incorrect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge Equilibrium Code (EEC) For Tokamaks

The edge equilibrium code (EEC) described in this paper is developed for simulations of the near edge plasma using the finite element method. It solves the Grad-Shafranov equation in toroidal coordinate and uses adaptive grids aligned with magnetic field lines. Hermite finite elements are chosen for the numerical scheme. A fast Newton scheme which is the same as implemented in the equilibrium and stability code (ESC) is applied here to adjust the grids.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-Axisymmetric Shaping of Tokamaks Preserving Quasi-Axisymmetry

If quasi-axisymmetry is preserved, non-axisymmetric shaping can be used to design tokamaks that do not require current drive, are resilient to disruptions, and have robust plasma stability without feedback. Suggestions for addressing the critical issues of tokamaks can only be validated when presented with sufficient specificity that validating experiments can be designed. The purpose of this paper is provide that specificity for non-axisymmetric shaping. To our knowledge, no other suggestions for the solution of a number of tokamak issues, such as disruptions, have reached this level of specificity. Sequences of three-field-period quasi-axisymmetric plasmas are studied. These sequences address the questions: (1) What can be achieved at various levels of non-axisymmetric shaping? (2) What simplifications to the coils can be achieved by going to a larger aspect ratio? (3) What range of shaping can be achieved in a single experimental facility? The sequences of plasmas found in this study provide a set of interesting and potentially important configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ab-initio General-relativistic Neutrino-radiation Hydrodynamics Simulations of Long-lived Neutron Star Merger Remnants to Neutrino Cooling Timescales

Abstract We perform the first 3D ab-initio general-relativistic neutrino-radiation hydrodynamics of a long-lived neutron star merger remnant spanning a fraction of its cooling timescale. We find that neutrino cooling becomes the dominant energy loss mechanism after the gravitational-wave dominated phase (∼20 ms postmerger). Electron flavor antineutrino luminosity dominates over electron flavor neutrino luminosity at early times, resulting in a secular increase of the electron fraction in the outer layers of the remnant. However, the two luminosities become comparable ∼20–40 ms postmerger. A dense gas of electron antineutrinos is formed in the outer core of the remnant at densities ∼10 14.5 g cm −3 , corresponding to temperature hot spots. The neutrinos account for ∼10% of the lepton number in this region. Despite the negative radial temperature gradient, the radial entropy gradient remains positive, and the remnant is stably stratified according to the Ledoux criterion for convection. A massive accretion disk is formed from the material squeezed out of the collisional interface between the stars. The disk carries a large fraction of the angular momentum of the system, allowing the remnant massive neutron star to settle to a quasi-steady equilibrium within the region of possible, stable, rigidly rotating configurations. The remnant is differentially rotating, but it is stable against the magnetorotational instability. Other MHD mechanisms operating on longer timescales are likely responsible for the removal of the differential rotation. Our results indicate the remnant massive neutron star is thus qualitatively different from a protoneutron stars formed in core-collapse supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗

Activity in galaxies and quasars

Activity in galaxies and quasars is interpreted in terms of plasma processes occurring in the magnetosphere of a magnetoid model. The magnetoid is comprised of a core and an annulus rotating about a common axis with different angular velocities. It is conjectured that the transition from a closed force field configuration to an open one will be effected by an MHD eruptive instability, and that such eruptions lead to high velocity clouds of cool gas, identified with clouds producing absorption lines in quasars. The ejection of radio clouds from galaxies and quasars is attributed to galactic flares. Current sheets contain mildly relativistic electrons moving in directions partially transverse to the magnetic field. Synchrotron radiation from these electrons is held responsible for the nonthermal radiation from quasars and certain galaxies. It is proposed that minor instabilities of the current sheets are responsible for fluctuations in the nonthermal luminosity and for small scale radio bursts sometimes observed.

Sturrock, P. A.↗

Activity in galaxies and quasars.

Activity in galaxies and quasars is interpreted in terms of plasma processes occurring in the magnetosphere of a certain magnetoid model. This magnetoid comprises a core and an annulus rotating about a common axis with different angular velocities. The magnetic field linking the core to the annulus may begin in an initial current-free state but will be distorted along a sequence of force-free configurations. After a finite differential rotation, the force-free configuration has higher energy than a corresponding open-field configuration. It is conjectured that the transition from the closed configuration to an open configuration will be effected by an MHD eruptive instability, and that such eruptions lead to high-velocity clouds of cool gas identified with clouds producing absorption lines in quasars. It is proposed that minor instabilities of the current sheets are responsible for fluctuations in the nonthermal luminosity and for small-scale radio bursts sometimes observed in galaxies and quasars.

Sturrock, P. A.↗

Physics of the interaction of the solar wind with the ionosphere of Venus - Flow/field models

Venus deflects incident solar wind by means of thermal and magnetic pressure, both of which are produced by ionospheric currents that are in turn driven by pressure gradients and electric fields induced in the ionosphere by the flowing magnetized solar wind plasma. The ionospheric currents connect across the ionopause into the ionosheath region, and close on, and behind, the bow shock. The computed ionospheric plasma velocity distribution is found to be spatially asymmetric, with the fastest flow velocities lying perpendicular to the ionospheric magnetic fields. Computations also indicate that the ionosphere is susceptible to an MHD shear instability whose extent and location is a function of external solar wind conditions. The present Venus ionosphere model compares well with in situ Pioneer Venus Orbiter observations.

Cloutier, P. A.↗

Ideal MHD Stability of ITER Steady State Scenarios with ITBs

One of ITER goals is to demonstrate feasibility of continuous operations using non-inductive current drive. Two main candidates have been identified for advanced operations: the long duration, high neutron fluency hybrid scenario and the steady state scenario, both operating at a plasma current lower than the reference ELMy scenario [1][2] to minimize the required current drive. The steady state scenario targets plasmas with current 7-10 MA in the flat-top, 50% of which will be provided by the self-generated, pressure-driven bootstrap current. It has been estimated that, in order to obtain a fusion gain Q > 5 at a current of 9 MA, it should be ΒN > 2.5 and H > 1.5 [3]. This implies the presence of an Internal Transport Barrier (ITB). This work discusses how the stability of steady state scenarios with ITBs is affected by the external heating sources and by perturbations of the equilibrium profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear 3D M3D-C1 simulations of tokamak plasmas crossing a MHD linear stability boundary

The goal of the present work is to better understand and develop a predictive capability for when approaching and crossing a MHD linear instability boundary leads to a thermal quench and subsequent disruption (hard limit), and when it just leads to increased transport or small amplitude oscillations(soft). Understanding the difference between hard and soft limits is crucial for effective disruption prediction and avoidance. We present several examples of both hard and soft beta limits.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical Analyses of Energetic Particles in LHD

The confinement of energetic ions generated by neutral beam injection (NBI) and ion cyclotron resonance frequency heating is studied using GNET simulation code, in which the drift kinetic equation is solved in five-dimensional phase-space. The steady-state distributions of the energetic ions are obtained, and characteristics of the energetic-ion distribution depending on the plasma heating method are shown. The magnetic configuration effect on the energetic-ion confinement is also investigated, and it is found that the energetic-ion confinement is improved by a strong inward shift of the magnetic axis position in the major radius direction. The interaction between energetic particles and Alfven eigenmodes are investigated using the MEGA code and the AE3D code. A reduced version of the MEGA code has been developed to simulate the Alfven eigenmode (AE) evolution in the Large Helical Device (LHD) plasma with NBI and collisions taken into account. The spatial profile and frequency of the AE modes in the LHD plasma are analyzed with the AE3D code. The evolution of energetic particles and AE mode amplitude and phase are followed in a self-consistent way, while the AE spatial profiles are assumed to be constant. It is demonstrated that the AE bursts can be simulated with the new code.

74 ATOMIC AND MOLECULAR PHYSICS↗

Kelvin–Helmholtz instability under stabilizing parallel magnetic field in nonhomogeneous compressible MHD flows

We study the Kelvin–Helmholtz instability (KHI) for the general case of a compressible, nonhomogeneous, magnetized plasma flow. The study is limited to a vortex sheet interface with an imposed parallel magnetic field. We introduce a new formalism based on a convective Mach number M c , a convective Alfvénic Mach number M Ac , and a total convective Mach number that combines the two. We derive an analytic expression of the KHI growth rate for a homogeneous flow (i.e., zero Atwood number, A=0) that converges toward both the expression for unmagnetized compressible flow and Chandrasekhar's expression for magnetized incompressible flow. Otherwise, the dispersion relation is solved numerically and allows deriving general stability diagrams of magnetized KHI for the triplet (A, M c , β −plasma) parameters. We show these parameters uniquely define all configurations for a parallel magnetic field. We also construct diagrams with respect to the convective Alfvénic Mach number, the β − plasma parameter, or the magnetic field showing which magnetic field strength is required for stabilizing a given shear flow. The theoretical growth rates are compared with 18 simulations made with the GAMERA code, currently used for 3D magnetospheric simulations. Finally, we apply our results to the analysis of a past KHI experiment performed at the OMEGA laser facility, showing linear theory succeeds to provide accurate estimates of the growth rate at early times. We further discuss how our results can inform future experiments in the high-Mach magnetized regime at the National Ignition Facility. Possible limitations of the study due to resistive, mixing, or turbulence effects are discussed.

compressible flows↗

Weibel-like instability in magnetohydrodynamics

In magnetohydrodynamics (MHD), a density perturbation perpendicular to an electron temperature gradient generates a magnetic field around itself that acts to increase the perturbation, which can lead to instability. An MHD dispersion relation is obtained for perturbations perpendicular to a fixed electron temperature gradient with an initial in-plane magnetic field, including resistivity, viscosity, and the electrothermal coefficient. Instability occurs for sufficiently small electron temperature-gradient scale lengths determined by the ion collisionless skin depth. Both viscosity and resistivity are required to prevent growth at arbitrarily small spatial scales and to give a physical result for the fastest growing mode. The perpendicular electrothermal coefficient is only significant for a narrow range of low electron Hall parameters, causing a modest reduction in magnetic field growth and modifying the criteria for instability in the presence of viscosity. If the definition of the Weibel instabilityis extended to include all instabilities due to anisotropy in the electron velocity distribution, then this is a Weibel-like instability because an electron temperature gradient implies an anisotropic electron velocity distribution. Here, the implications for the formation of filaments in laser-produced plasmas and for the verification of MHD codes are considered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The modulational instability for the TDNLS equations for weakly nonlinear dispersive MHD waves

In this paper we study the modulational instability for the TDNLS equations derived by Hada (1993) and Brio, Hunter, and Johnson to describe the propagation of weakly nonlinear dispersive MHD waves in beta approximately 1 plasmas. We employ Whitham's averaged Lagrangian method to study the modulational instability. This complements studies of the modulational instability by Hada (1993) and Hollweg (1994), who did not use the averaged Lagrangian approach.

Webb, G. M.↗