Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MELTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Stability and breakdown of Ca{sup 13}CO{sub 3} melt associated with formation of {sup 13}C-diamond in static high pressure experiments up to 43 GPa and 3900 K

Melting of calcium carbonate Ca{sup 13}CO{sub 3}, stability of the melt and its decomposition were studied in static high pressure experiments at pressures of 11-43 GPa and temperatures of 1600-3900 K using diamond anvil cell technique with laser heating. We observed formation of {sup 13}C-graphite (below 16 GPa) and {sup 13}C-diamond (between 16 and 43 GPa) on decomposition of the Ca{sup 13}CO{sub 3} melt at temperatures above 3400 K. At temperatures below 3400 K congruent melting of calcium carbonate was confirmed. The experimental results were applied to construction of the phase diagram of CaCO{sub 3} up to 43 GPa and 3900 K focusing at the melting curve of calcium carbonate and the decomposition phase boundary of CaCO{sub 3} melt. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Phase states of CaCO{sub 3} were studied at P=11-43 GPa and T=1600-3900 K. Black-Right-Pointing-Pointer {sup 13}C-diamond easily crystallizes in carbonate-carbon (Ca{sup 13}CO{sub 3-}{sup 13}C-graphite) melt-solutions. Black-Right-Pointing-Pointer Ca-carbonate melts congruently that was observed in experiments in DAC with laser heating. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} melt, indicated by formation of graphite and/or diamond. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} was observed at temperatures above 3400 K in the pressure interval studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In-situ investigation of incipient melting in a 319 type Al alloy using laser scanning confocal microscopy

Highlights: • In-situ analysis of incipient melting of ternary eutectic in Al alloy. • Incipient melting occurred in three distinct stages in the eutectic. • Increased heating rate increase rate of liquid film propagation. • Incipient melting transformed initial eutectic structure and caused oxidation. • Study determined incipient melting mechanism for eutectic structures. - Abstract: The modified 319 Al alloy system has been used extensively in precision sand casting of automotive powertrain applications such as engine blocks and cylinder heads, with significant improvement in vehicle fuel efficiency. However, a concern in elevated temperature processing of Al alloys, such as heat treatment and hot working processes, is incipient melting of secondary phases, which is deleterious to mechanical properties. In this study, the laser scanning confocal microscopy (LSCM) technique was used in the analysis of in-situ changes in microstructure as a result of incipient melting. Microstructural analysis was carried out prior to and following elevated temperature exposure in the LSCM using optical microscopy, SEM and EDX. The results suggest that incipient melting of the Al-Al{sub 2}Cu-Al{sub 5}Mg{sub 8}Cu{sub 2}Si{sub 6} ternary eutectic clusters was initiated by the formation of a liquid film which propagated rapidly from the eutectic clusters, coating the Al dendrites in regions adjacent to the eutectic clusters. Following film formation, the ternary eutectic clusters melted completely. Incipient melting also resulted in a localized change in composition in the interdendritic channels as supported by a change in cluster morphology from eutectic to a combination of coarse blocky Al-Cu-Ni and Si particles, and ultra-fine eutectic.

36 MATERIALS SCIENCE↗

Mutual interaction between high and low stereo-regularity components for crystallization and melting behaviors of polypropylene blend fibers

Crystallization and melting behaviors of blend fibers of two types of polypropylene (PP), i.e. high stereo-regularity/high molecular weight PP (HPP) and low stereo-regularity/low molecular weight PP (LPP), was investigated. Blend fibers consisting of various HPP/LPP compositions were prepared through the melt spinning process. Differential scanning calorimetry (DSC), temperature modulated DSC (TMDSC) and wide-angle X-ray diffraction (WAXD) analysis were applied for clarifying the crystallization and melting behaviors of individual components. In the DSC measurement of blend fibers with high LPP composition, continuous endothermic heat was detected between the melting peaks of LPP at around 40 °C and that of HPP at around 160 °C. Such endothermic heat was more distinct for the blend fibers with higher LPP composition indicating that the melting of LPP in the heating process was hindered because of the presence of HPP crystals. On the other hand, heat of crystallization was detected at around 90 °C in the case of blend fibers with LPP content of 30 to 70 wt%, indicating that the crystallization of HPP component was taking place during the heating of as-spun blend fibers in the DSC measurement. Through the TMDSC analysis, re-organization of the crystalline structure through the simultaneous melting and re-crystallization was detected in the cases of HPP and blend fibers, whereas re-crystallization was not detected during the melting of LPP fibers. In the WAXD analysis during the heating of fibers, amount of a-form crystal was almost constant up to the melting in the case of single component HPP fibers, whereas there was a distinct increase of the intensity of crystalline reflections from around 100 °C, right after the melting of LPP in the case of blend fibers. These results suggested that the crystallization of HPP in the spinning process as well as during the conditioning process after spinning was hindered by the presence of LPP.

36 MATERIALS SCIENCE↗

Effect of Thermal Expansion Coefficient, Viscosity and Melting Range in Simulation of PCM Embedded Heat Exchangers With and Without Fins

Phase change material heat exchangers (PCMHX) have an important role in integrating renewable energy systems. PCMHX can offer high storage density at various temperatures of interest and can be used for grid load shifting purposes. Numerical models enable engineers to estimate PCMHX performance for different design parameters and operating conditions. Modeling phase change phenomena is challenging due to the complex time-dependent nature of the process. The accuracy of models is highly sensitive to PCM thermo-physical properties. Thermal expansion coefficient (β), viscosity (μ) and melting temperature range (MR) of a PCM are important properties, especially when natural convection is not negligible. In PCMHX modeling, using less than accurate values for these properties can have significant impact on the simulation outcomes. These properties and discussions thereof are not readily available in the literature. This paper presents a brief review of the literature and a numerical study investigating the model sensitivity to the above-mentioned properties for PCMHX with and without fins. CFD is used to evaluate the charging (melting) phenomena. The study quantifies the impact of uncertainty in these properties on the melting rate and temperature profile. Constant wall temperature was considered as heat source with no heat loss to ambient. Here, the results show that β and μ has significant effect on the melting rate and evolution of the melting front. For a non-finned domain when comparing results for different published values of β and μ, the deviation in melting time can be up to 12.9% and 57.6% respectively. For high wall temperatures, change in melting range did not impact melting time. But when the wall temperature is reduced, up to 9.8% deviation in melting time is observed.

CFD↗

Microtomography of partially molten rocks : three-dimensional melt distribution in mantle peridotite.

The permeability of the upper mantle controls melt segregation beneath spreading centers. Reconciling contradictory geochemical and geophysical observations at ocean ridges requires a better understanding of transport properties in partially molten rocks. Using x-ray synchrotron microtomography, we obtained three-dimensional data on melt distribution for mantle peridotite with various melt fractions. At melt fractions as low as 0.02, triple junctions along grain edges dominated the melt network; there was no evidence of an abrupt change in the fundamental character of melt extraction as melt fraction increased to 0.2. The porosity of the partially molten region beneath ocean ridges is therefore controlled by a balance between viscous compaction and melting rate, not by a change in melt topology.

58 GEOSCIENCES↗

Spatiotemporal evolution of melt ponds on Arctic sea ice

Melt ponds on sea ice play an important role in the Arctic climate system. Their presence alters the partitioning of solar radiation: decreasing reflection, increasing absorption and transmission to the ice and ocean, and enhancing melt. The spatiotemporal properties of melt ponds thus modify ice albedo feedbacks and the mass balance of Arctic sea ice. The Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition presented a valuable opportunity to investigate the seasonal evolution of melt ponds through a rich array of atmosphere-ice-ocean measurements across spatial and temporal scales. In this study, we characterize the seasonal behavior and variability in the snow, surface scattering layer, and melt ponds from spring melt to autumn freeze-up using in situ surveys and auxiliary observations. We compare the results to satellite retrievals and output from two models: the Community Earth System Model (CESM2) and the Marginal Ice Zone Modeling and Assimilation System (MIZMAS). During the melt season, the maximum pond coverage and depth were 21% and 22 ± 13 cm, respectively, with distribution and depth corresponding to surface roughness and ice thickness. Compared to observations, both models overestimate melt pond coverage in summer, with maximum values of approximately 41% (MIZMAS) and 51% (CESM2). This overestimation has important implications for accurately simulating albedo feedbacks. During the observed freeze-up, weather events, including rain on snow, caused high-frequency variability in snow depth, while pond coverage and depth remained relatively constant until continuous freezing ensued. Both models accurately simulate the abrupt cessation of melt ponds during freeze-up, but the dates of freeze-up differ. MIZMAS accurately simulates the observed date of freeze-up, while CESM2 simulates freeze-up one-to-two weeks earlier. This work demonstrates areas that warrant future observation-model synthesis for improving the representation of sea-ice processes and properties, which can aid accurate simulations of albedo feedbacks in a warming climate.

54 ENVIRONMENTAL SCIENCES↗

Wind‐Associated Melt Trends and Contrasts Between the Greenland and Antarctic Ice Sheets

Föhn and katabatic winds (downslope winds) can increase ice sheet surface melt, run-off, and ice-shelf vulnerability to hydrofracture and are poorly constrained on the Greenland and Antarctic ice sheets (GIS and AIS). We use regional climate model simulations of the GIS and AIS to quantify and intercompare trends in downslope winds and associated melt since 1960. Results reveal surface melt associated with downslope wind is significant on both the GIS and AIS representing 27.5 ± 4.5% and 19.7 ± 3.8% of total surface melt respectively. Wind-associated melt has decreased 31.8 ± 5.3% on the AIS while total melt decreased 15.4 ± 2.4% due to decreased föhn-induced melt on the Antarctic Peninsula and increasing stratospheric ozone. Wind-associated melt has increased 10.3 ± 2.5% on the GIS, combining with a more positive North Atlantic Oscillation and warmer surface to increase total melt 34 ± 5.8%.

58 GEOSCIENCES↗

Basal Melting and Oceanic Observations Beneath Central Fimbulisen, East Antarctica

Abstract Basal melting of ice shelves is fundamental to Antarctic ice sheet mass loss, yet direct observations remain sparse. We present the first year‐round melt record (2017–2021) from a phase‐sensitive radar on Fimbulisen, one of the fastest flowing ice shelves in Dronning Maud Land, East Antarctica. The observed long‐term mean ablation rate at 350 m depth below the central ice shelf was 1.0 ± 0.5 m yr −1 , marked by substantial sub‐weekly variability ranging from 0.4 to 3.5 m yr −1 . 36‐h filtered basal melt rate fluctuations closely align with ocean velocity. On seasonal time scales, melt rates peak during austral spring to autumn (September–March), driven by both elevated ocean velocities and thermal driving near the base. The combined effect of thermal driving and current speed explains the majority of the melt rate variability ( r = 0.84), highlighting the dominant role of shear‐driven turbulence. This relationship enables parameterization of melt rates for the decade‐long ocean record (2010–2021), although deviations appear under low and high forcing conditions. Both observed and parameterized melt rates show similar yearly mean magnitudes compared to satellite‐derived melt rates but with a tenfold lower seasonal amplitude and a 3‐month delay in seasonality. These detailed concurrent ice–ocean observations provide essential validation data for remote sensing and numerical models that aim to quantify and project ice‐shelf response to a change in ocean forcing. In situ measurements and continued monitoring are crucial for accurately assessing and modeling future basal melt rates, and for understanding the complex dynamics driving ice‐shelf stability and sea‐level change.

54 ENVIRONMENTAL SCIENCES↗

Size-dependent second-order-like phase transitions in Fe nanocluster melting from low-temperature structural isomerization

Here, in this work, the melting phase transitions of Fe n nanoclusters with 10 ≤ n ≤ 100 atoms are investigated using classical many-body molecular dynamics simulations. For many cluster sizes, surface melting occurs at much lower temperatures than core melting. Surface and core melting points and energetic melting points (temperatures of maximum heat capacity, C v ) are calculated for all cluster sizes. Melting properties are found to be strong functions of cluster structure. Cluster sizes with closed-shell structures always have first-order-like phase transitions. Almost one-third of cluster sizes in the analyzed range exhibit second-order-like phase transitions due to the presence of multiple structural configurations close in energy. 1-shell clusters with one to a few more atoms than a neighboring closed-shell structure have very low surface melting points and very high energetic melting points compared to their closed-shell counterparts. In clusters above 50 atoms with certain core structures, melting of the surface before the core was observed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray Raman scattering study of MgSiO₃ glass at high pressure: Implication for triclustered MgSiO₃ melt in Earth's mantle

Silicate melts at the top of the transition zone and the core-mantle boundary have significant influences on the dynamics and properties of Earth's interior. MgSiO 3 -rich silicate melts were among the primary components of the magma ocean and thus played essential roles in the chemical differentiation of the early Earth. Diverse macroscopic properties of silicate melts in Earth's interior, such as density, viscosity, and crystal-melt partitioning, depend on their electronic and short-range local structures at high pressures and temperatures. Despite essential roles of silicate melts in many geophysical and geodynamic problems, little is known about their nature under the conditions of Earth's interior, including the densification mechanisms and the atomistic origins of the macroscopic properties at high pressures. Here, we have probed local electronic structures of MgSiO 3 glass (as a precursor to Mg-silicate melts), using high-pressure x-ray Raman spectroscopy up to 39 GPa, in which high-pressure oxygen K-edge features suggest the formation of tricluster oxygens (oxygen coordinated with three Si frameworks; [3] O) between 12 and 20 GPa. Our results indicate that the densification in MgSiO 3 melt is thus likely to be accompanied with the formation of triculster, in addition to a reduction in nonbridging oxygens. The pressure-induced increase in the fraction of oxygen triclusters >20 GPa would result in enhanced density, viscosity, and crystal-melt partitioning, and reduced element diffusivity in the MgSiO 3 melt toward deeper part of the Earth's lower mantle.

Lee, Sung Keun↗

Polymorphism and melt in high-pressure tantalum. II. Orthorhombic phases

Continuing uncertainty in the high-pressure melt curves of bcc transition metals has spawned renewed research interest in the phase diagrams of these materials, with tantalum becoming an important prototype. Here, the present paper extends the quantum-based investigation of high- T, P polymorphism and melt in Ta that was begun in Paper I [Haskins et al., Phys. Rev. B 86, 224104 (2012)] on five candidate cubic and hexagonal structures (bcc, A15, fcc, hcp, and hex-ω) to here treat four promising orthorhombic structures (Pnma, Fddd, Pmma, and α-U). Using DFT-based MGPT multi-ion potentials that allow accurate MD simulations of large systems, we showed in Paper I that the mechanically unstable fcc, hcp, and hex-ω structures can only be stabilized at high- T , P by large anharmonic vibrational effects, requiring systems of ~500 atoms to produce size-independent melt curves and reliable calculations of thermodynamic stability. This reversed a previous small-cell quantum-simulation prediction of a high- T , P hex-ω phase. Subsequent DFT calculations have now suggested a more energetically favorable and mechanically stable Pnma structure, which again small-cell quantum simulations predict could be a high- T , P phase. Our present MGPT total-energy and phonon calculations show that not only Pnma, but all four orthorhombic structures considered here, are similarly energetically favorable, and that Fddd in addition to Pnma is mechanically stable at T = 0 up to 420 GPa. MGPT-MD simulations further reveal spontaneous temperature-induced Pnma → bcc and Fddd → bcc transformations at modest temperatures, peaking at ~1450 K near 100 GPa. At high temperatures near melt, we find T -dependent c / a and b / a axial ratios and large stabilizing anharmonicity present in all four orthorhombic structures. The anharmonicity drives significantly larger melt size effects, requiring systems of ~1000 – 4000 atoms to produce converged melt curves for reliable predictions of relative thermodynamic stability. In the large-cell limit, with ~40000 solid-phase atoms and accurate two-phase MGPT-MD melt simulation, we find that Pnma, Fddd and α-U have melt temperatures that are equal to bcc over small pressure ranges in the vicinity of 100 GPa, but that the orthorhombic melt temperatures never exceed bcc up to 420 GPa. This finding suggests that Pnma, Fddd, and α-U remain highly competitive metastable phases that could coexist with bcc and possibly be observed experimentally. Finally, to add additional insight into our results we have constructed global Helmholtz free energies for the A15, Pnma, and Fddd phases of Ta, complementing previous free energies obtained for the bcc, fcc, and liquid phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ex-Vessel Core Melt Modeling Comparison between MELTSPREAD-CORQUENCH and MELCOR 2.1

System-level code analyses by both United States and international researchers predict major core melting, bottom head failure, and corium-concrete interaction for Fukushima Daiichi Unit 1 (1F1). Although system codes such as MELCOR and MAAP are capable of capturing a wide range of accident phenomena, they currently do not contain detailed models for evaluating some ex-vessel core melt behavior. However, specialized codes containing more detailed modeling are available for melt spreading such as MELTSPREAD as well as long-term molten corium-concrete interaction (MCCI) and debris coolability such as CORQUENCH. In a preceding study, Enhanced Ex-Vessel Analysis for Fukushima Daiichi Unit 1: Melt Spreading and Core-Concrete Interaction Analyses with MELTSPREAD and CORQUENCH, the MELTSPREAD-CORQUENCH codes predicted the 1F1 core melt readily cooled in contrast to predictions by MELCOR. The user community has taken notice and is in the process of updating their systems codes; specifically MAAP and MELCOR, to improve and reduce conservatism in their ex-vessel core melt models. This report investigates why the MELCOR v2.1 code, compared to the MELTSPREAD and CORQUENCH 3.03 codes, yield differing predictions of ex-vessel melt progression. To accomplish this, the differences in the treatment of the ex-vessel melt with respect to melt spreading and long-term coolability are examined. The differences in modeling approaches are summarized, and a comparison of example code predictions is provided.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

MELT RATE TESTING FOR SLUDGE BATCH 6

The Savannah River National Laboratory (SRNL) was requested to provide Savannah River Remediation (SRR) with a recommended frit composition for Sludge Batch 6 (SB6) to optimize processing at the Defense Waste Processing Facility (DWPF). This report discusses the results of a series of melt rate experiments that were completed in support of the frit recommendation and the preparation of the feed used in the testing. The objective of the work was to identify the impact of individual frit component concentrations on melt rate for both SB6 and for DWPF sludge batches in general. The dry fed, Melt Rate Furnace (MRF) was used to compare the relative melt rate performance of several candidate frit compositions. Sludge composition projection changes and variation led to the fabrication and testing of several new frits along with Frit 418, which is currently utilized at the DWPF for Sludge Batch 5 (SB5) processing. The melt rate testing results show that changes in the frit composition, such as increases in B{sub 2}O{sub 3} or Li{sub 2}O concentrations, can provide a faster melt rate for SB6 relative to Frit 418. However, the composition of SB6 as currently projected (February 2010 blended with a 40 inch heel of SB5) does not allow for significant changes in frit composition relative to Frit 418 without compromising the projected operating windows. Only one of the new frits tested, Frit IS7, remains viable for SB6 processing based on the current composition projections. The melt rate results also demonstrated that a low Na{sub 2}O concentration frit (particularly Frit IS7) can provide reasonable melt rates if the concentrations of Li{sub 2}O or B{sub 2}O{sub 3} in the frit are increased. The measured melt rate for Frit IS7 with the simulated SB6 feed was about 15% faster than that for Frit 418. The projected operating windows for Frits 418 and IS7 are very similar with the current SB6 projections. However, waste loadings with Frit IS7 are limited by low viscosity predictions, while waste loadings with Frit 418 are limited by predictions of nepheline crystallization. It is recommended that SRNL reevaluate the final SB6 composition once washing and blending are complete to determine whether a change in frit composition could provide improved operating windows, improved sulfate solubility, and/or increased waste throughput.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A protocol for calculating basal melt rates in the ISMIP6 Antarctic ice sheet projections

Climate model projections have previously been used to compute ice shelf basal melt rates in ice sheet models, but the strategies employed – e.g., ocean input, parameterization, calibration technique, and corrections – have varied widely and are often ad hoc. Here, a methodology is proposed for the calculation of circum-Antarctic basal melt rates for floating ice, based on climate models, that is suitable for ISMIP6, the Ice Sheet Model Intercomparison Project for CMIP6 (6th Coupled Model Intercomparison Project). The past and future evolution of ocean temperature and salinity is derived from a climate model by estimating anomalies with respect to the modern day, which are added to a present-day climatology constructed from existing observational datasets. Temperature and salinity are extrapolated to any position potentially occupied by a simulated ice shelf. A simple formulation is proposed for a basal melt parameterization in ISMIP6, constrained by the observed temperature climatology, with a quadratic dependency on either the nonlocal or local thermal forcing. Two calibration methods are proposed: (1) based on the mean Antarctic melt rate (MeanAnt) and (2) based on melt rates near Pine Island's deep grounding line (PIGL). Future Antarctic mean melt rates are an order of magnitude greater in PIGL than in MeanAnt. The PIGL calibration and the local parameterization result in more realistic melt rates near grounding lines. PIGL is also more consistent with observations of interannual melt rate variability underneath Pine Island and Dotson ice shelves. This work stresses the need for more physics and less calibration in the parameterizations and for more observations of hydrographic properties and melt rates at interannual and decadal timescales.

54 ENVIRONMENTAL SCIENCES↗

Heterogeneous dissemination of projectile materials in the impact melts from Wabar crater, Saudi Arabia

The initial observations of Spencer (1933) that two distinct impact melts coexist at the 90-m-diameter Wabar crater, Saudi Arabia, is confirmed. A dark or 'black' melt contains on the order of 4 percent meteoritic contamination, while the transparent or 'white' melt contains less than 1 percent. The Fe/Ni ratios in both varieties exhibit considerable scatter on electron-microprobe scales, akin to those reported by others for metal spherules in the black melt. If the meteoritic component is subtracted, both melts are chemically very similar. Clasts engulfed by the Wabar melts were investigated also, as they represent the progenitor lithologies from which the melts formed. Bulk compositions for these clasts reveal subtle differences in modal feldspar content within the quartz-rich Wabar target. Both melts require that a minimum of two target lithologies be present in the Wabar melt zone.

Horz, F.↗

Lunar anorthosites, their equilibrium melts and the bulk moon

The present study uses plagioclase compositions and partition coefficients for several elements to estimate melts from which lunar anorthosites formed and the partition liquids from which these melts were derived. The Fe and Mg contents of the plagioclases are examined for their potential use as predictors of Fe and Mg in associated melts. Usable trace elements are employed with selected partition coefficients to predict the equilibrium melts for lunar anorthosites, and melts for anorthosites are used in various models to calculate the composition of the initial melt from which the lunar mantle and eventually the anorthosites evolved. The initial melts are compared with bulk moon compositions to evaluate the nature of the melting that could have produced the anorthosites. All the models indicate that extensive melting of all or nearly all of the lunar mantle is required to produce a lunar crust that constitutes 13-15 percent of the moon's volume.

Phinney, W. C.↗

Kinetics of Nucleation and Crystal Growth in Glass Forming Melts in Microgravity

The following list summarizes the most important results that have been consistently reported for glass forming melts in microgravity: (1) Glass formation is enhanced for melts prepared in space; (2) Glasses prepared in microgravity are more chemically homogeneous and contain fewer and smaller chemically heterogeneous regions than identical glasses prepared on earth; (3) Heterogeneities that are deliberately introduced such as Pt particles are more uniformly distributed in a glass melted in space than in a glass melted on earth; (4) Glasses prepared in microgravity are more resistant to crystallization and have a higher mechanical strength and threshold energy for radiation damage; and (5) Glasses crystallized in space have a different microstructure, finer grains more uniformly distributed, than equivalent samples crystallized on earth. The preceding results are not only scientifically interesting, but they have considerable practical implications. These results suggest that the microgravity environment is advantageous for developing new and improved glasses and glass-ceramics that are difficult to prepare on earth. However, there is no suitable explanation at this time for why a glass melted in microgravity will be more chemically homogeneous and more resistant to crystallization than a glass melted on earth. A fundamental investigation of melt homogenization, nucleation, and crystal growth processes in glass forming melts in microgravity is important to understanding these consistently observed, but yet unexplained results. This is the objective of the present research. A lithium disilicate (Li2O.2SiO2) glass will be used for this investigation, since it is a well studied system, and the relevant thermodynamic and kinetic parameters for nucleation and crystal growth at 1-g are available. The results from this research are expected to improve our present understanding of the fundamental mechanism of nucleation and crystal growth in melts and liquids, and to lead improvements in glass processing technology on earth, with the potential for creating new high performance glasses and glass-ceramics.

Day, Delbert E.↗

On Modeling Air/Space-Borne Radar Returns in the Melting Layer

The bright band is the enhanced radar echo associated with the melting of hydrometeors in stratiform rain where the melting process usually occurs below 0 C isotherm over a distance of about 500m. To simulate this radar signature, a scattering model of melting snow is proposed in which the fractional water content is prescribed as a function of the radius of a spherical mixed- phase particle consisting of air, ice and water. The model is based on the observation that melting starts at the surface of the particle and then gradually develops towards the center. To compute the scattering parameters of a non-uniform melting particle, the particle is modeled as a sphere represented by a collection of 64(exp 3) cubic cells of identical size where the probability of water at any cell is prescribed as a function of the radius. The internal field of the particle, used for deriving the effective dielectric constant, is computed by the Conjugate Gradient and Fast Fourier Transform (CGFFT) numerical methods. To make computations of the scattering parameters more efficient, a multi-layer stratified-sphere scattering model is introduced after demonstrating that the scattering parameters of the non-uniformly melting particle can be accurately reproduced by the stratified sphere. In conjunction with a melting layer model that describes the melting fractions and fall velocities of hydrometeors as a function of the distance from the 0 C isotherm, the stratified-sphere model is used to simulate the radar bright band profiles. These simulated profiles are shown to compare well with measurements from the Precipitation Radar (PR) aboard the Tropical Rainfall Measuring Mission (TRMM) satellite and a dual-wavelength airborne radar. The results suggest that the proposed model of a melting snow particle may be useful in studying the characteristics of the bright-band in particular and mixed- phase hydrometeors in general.

Liao, Liang↗