Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Deposition of very thick Mo/Al multilayer films using magnetron sputtering

To understand materials at extreme conditions dynamic ramp compression techniques/experiments are critical, and gradient density impactors (GDIs) have the potential to enable high quality experiments. Very thick (i.e., hundreds of μm thick) multilayer films consisting of high z/low z layers with a gradient in z through the stack can serve as a GDI. Surprisingly while there is a large amount of literature on the topic of multilayer films, there is an absence of literature on very thick multilayer films. A number of multilayer film systems deposited by dc magnetron sputtering were evaluated as potential candidates, including Cu/Al, Ta/Al, and Mo/Al. The Mo/Al multilayer system was observed to be the most promising candidate and is the primary focus of this paper. Mo/Al multilayer films up to ∼400 μm thick with reasonable thickness uniformity were deposited.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-rate deposition of ultrathick bismuth films by direct-current magnetron sputtering

Bismuth coatings deposited at room temperature by physical vapor deposition typically feature irregularly-shaped grains and a high density of voids, thereby preventing their use in many potential applications. Here, we demonstrate the deposition of low-stress, high-density 40-μm-thick Bi films by systematically studying the effect of the deposition rate and substrate tilt on the properties of Bi films deposited at room temperature by direct-current magnetron sputtering. Furthermore, results show that, with increasing deposition rate, the morphology, structure, and properties of Bi films greatly improve, while an increase in substrate tilt leads to a monotonic decrease in film thickness, density, and electrical conductivity.

Bismuth↗

Microstructural properties of phosphorus-doped p-type ZnO grown by radio-frequency magnetron sputtering

Phosphorus (P)-doped ZnO thin films were grown by radio-frequency magnetron sputtering to study the microstructural properties of p-type ZnO. As-grown P-doped ZnO, a semi-insulator, was converted to p-type ZnO after being annealed at 800 deg. C in an N{sub 2} ambient. X-ray diffraction, secondary-ion-mass spectrometry, and Hall effect measurements indicated that P{sub 2}O{sub 5} phases in as-grown P-doped ZnO disappeared after thermal annealing to form a substitutional P at an O lattice site, which acts as an acceptor in P-doped ZnO. Transmission electron microscopy showed that the formation of stacking faults was facilitated to release the strain in P-doped ZnO during post-thermal annealing.

36 MATERIALS SCIENCE↗

Calculation of gas heating in a dc sputter magnetron

The effect of gas heating in laboratory sputter magnetrons is investigated by means of numerical modeling. The model is two-dimensional in the coordinate space and three-dimensional in the velocity space based on the particle-in-cell-Monte Carlo collisions technique. It is expanded in a way that allows the inclusion of the neutral plasma particles (fast gas atoms and sputtered atoms), which makes it possible to calculate the gas temperature and its influence on the discharge behavior in a completely self-consistent way. The results of the model are compared to experimental measurements and to other existing simulation results. The results show that gas heating is pressure dependent (rising with the increase in the gas pressure) and should be taken into consideration at pressures above 10 mTorr.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Observation of Ti{sup 4+} ions in a high power impulse magnetron sputtering plasma

Multiply charged titanium ions including Ti{sup 4+} were observed in high power impulse magnetron sputtering discharges. Mass/charge spectrometry was used to identify metal ion species. Quadruply charged titanium ions were identified by isotope-induced broadening at mass/charge 12. Due to their high potential energy, Ti{sup 4+} ions give a high yield of secondary electrons, which in turn are likely to be responsible for the generation of multiply charged states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasma dynamics during relativistic S-band magnetron operation

Results of a time- and space-resolved spectroscopic research studies of an S-band relativistic magnetron generating 1.5x10{sup 8} W microwave power at f=2950 MHz, powered by a linear induction accelerator (450 kV, 4 kA, 150 ns), are presented. The cathode plasma electron density and temperature were obtained by analyzing H{sub {alpha}} and H{sub {beta}} hydrogen Ballmer series and carbon C II and C III ion spectral lines and the results of collision radiative modeling. It was shown that the microwave generation is accompanied by a significant increase in plasma density and ion temperature, up to {approx}5x10{sup 16} cm{sup -3} and {approx}8 eV, respectively. The plasma electron temperature was found to be {approx}8 eV. It was shown that the plasma expansion velocity in the axial direction reaches {approx}10{sup 7} cm/s and does not exceed {approx}2x10{sup 5} cm/s in the radial direction. In addition, it was shown that the plasma is not uniform and consists of separate plasma spots whose number increases during the accelerating pulse. Estimates of the plasma transport parameters and its interaction with microwave radiation are also discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ordering of Fine Particles in a Planar Magnetron Plasma

Fine particles injected in a planar magnetron were pushed upward by diffusible plasma, leading to being suspended by the force balance with the gravity and forming three-dimensional structures on the two-dimensional structure formed by particle strings.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ionic conductivity and thermal stability of magnetron-sputtered nanocrystalline yttria-stabilized zirconia

Thermally stable, stoichiometric, cubic yttria-stabilized zirconia (YSZ) thin-film electrolytes have been synthesized by reactive pulsed dc magnetron sputtering from a Zr-Y (80/20 at. %) alloy target. Films deposited at floating potential had a <111> texture. Single-line profile analysis of the 111 x-ray diffraction peak yielded a grain size of approx20 nm and a microstrain of approx2% regardless of deposition temperature. Films deposited at 400 deg. C and selected bias voltages in the range from -70 to -200 V showed a reduced grain size for higher bias voltages, yielding a grain size of approx6 nm and a microstrain of approx2.5% at bias voltages of -175 and -200 V with additional incorporation of argon. The films were thermally stable; very limited grain coarsening was observed up to an annealing temperature of 800 deg. C. Temperature-dependent impedance spectroscopy analysis of the YSZ films with Ag electrodes showed that the in-plane ionic conductivity was within one order of magnitude higher in films deposited with substrate bias corresponding to a decrease in grain size compared to films deposited at floating potential. This suggests that there is a significant contribution to the ionic conductivity from grain boundaries. The activation energy for oxygen ion migration was determined to be between 1.14 and 1.30 eV.

36 MATERIALS SCIENCE↗

Cubic Sc{sub 1-x}Al{sub x}N solid solution thin films deposited by reactive magnetron sputter epitaxy onto ScN(111)

Reactive magnetron sputter epitaxy was used to deposit thin solid films of Sc{sub 1-x}Al{sub x}N (0<=x<=1) onto MgO(111) substrates with ScN(111) seed layers. Stoichiometric films were deposited from elemental Sc and Al targets at substrate temperatures of 600 deg. C. The films were analyzed by Rutherford backscattering spectroscopy, elastic recoil detection analysis, x-ray diffraction, and transmission electron microscopy. Results show that rocksalt structure (c)-Sc{sub 1-x}Al{sub x}N solid solutions with AlN molar fractions up to approx60% can be synthesized. For higher AlN contents, the system phase separates into c- and wurtzite structure (w)-Sc{sub 1-x}Al{sub x}N domains. The w-domains are present in three different orientations relative to the seed layer, namely, Sc{sub 1-x}Al{sub x}N(0001)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], Sc{sub 1-x}Al{sub x}N(1011)||ScN(111) with Sc{sub 1-x}Al{sub x}N[1210]||ScN[110], and Sc{sub 1-x}Al{sub x}N(1011)||ScN(113). The results are compared to first-principles density functional theory calculations for the mixing enthalpies of c-, w-, and zinc blende Sc{sub 0.50}Al{sub 0.50}N solid solutions, yielding metastability with respect to phase separation for all temperatures below the melting points of AlN and ScN.

36 MATERIALS SCIENCE↗

Magnetron injection gun for a broadband gyrotron backward-wave oscillator

The magnetron injection gun is capable of generating relativistic electron beam with high velocity ratio and low velocity spread for a gyrotron backward-wave oscillator (gyro-BWO). However, the velocity ratio ({alpha}) varies drastically against both the magnetic field and the beam voltage, which significantly limits the tuning bandwidth of a gyro-BWO. This study remedies this drawback by adding a variable trim field to adjust the magnetic compression ratio when changing the operating conditions. Theoretical results obtained by employing a two-dimensional electron gun code (EGUN) demonstrate a constant velocity ratio of 1.5 with a low axial velocity spread of 6% from 3.4-4.8 Tesla. These results are compared with a three-dimensional particle-tracing code (computer simulation technology, CST). The underlying physics for constant {alpha} will be discussed in depth.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma parameters of an active cathode during relativistic magnetron operation

The results of time- and space-resolved spectroscopic studies of the plasma produced at the surface of the ferroelectric cathode during the operation of an S-band relativistic magnetron generating approx50 MW microwave power at f=3005 MHz and powered by a linear induction accelerator (LIA) (150 kV, 1.5 kA, 250 ns) are presented. The surface plasma was produced by a driving pulse (3 kV, 150 ns) prior to the application of the LIA accelerating high-voltage pulse. The cathode plasma electron density and temperature were obtained by analyzing hydrogen H{sub a}lpha and H{sub b}eta, and carbon ions CII and CIII spectral lines, and using the results of nonstationary collision radiative modeling. It was shown that the microwave generation causes an increase in plasma ion and electron temperature up to approx4 and approx7 eV, respectively, and the plasma density increases up to approx7x10{sup 14} cm{sup -3}. Estimates of the plasma transport parameters and its interaction with microwave radiation are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Relativistic performance analysis of a high current density magnetron injection gun

Electron beam quality is essential to the performance of millimeter-wave gyroamplifiers, particularly the gyrotron traveling-wave tube amplifier, which is extremely sensitive to the electron velocity spread and emission uniformity. As one moves up in power and frequency, the quality of the electron beam becomes even more critical. One aspect of the electron beam formation technology which has received relatively little attention has been the performance analysis of the electron beam itself. In this study, a 100 kV, 8 A magnetron injection gun with a calculated perpendicular-to-parallel velocity ratio of 1.4 and axial velocity spread of 3.5% has been designed, tested, and analyzed. It is shown that the equipment precision and a fully relativistic data analysis model afford sufficient resolution to allow a verification of the theoretical predictions as well as a quantitative inference to the surface roughness of the cathode used.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of reactive high-power impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging

Time- and space-resolved optical emission spectroscopy and fast imaging were used for the investigation of the plasma dynamics of high-power impulse magnetron sputtering discharges. 200 {mu}s pulses with a 50 Hz repetition frequency were applied to a Cr target in Ar, N{sub 2}, and N{sub 2}/Ar mixtures and in a pressure range from 0.7 to 2.66 Pa. The power density peaked at 2.2-6 kW cm{sup -2}. Evidence of dominating self-sputtering was found for all investigated conditions. Up to four different discharge phases within each pulse were identified: (i) the ignition phase, (ii) the high-current metal-dominated phase, (iii) the transient phase, and (iv) the low-current gas-dominated phase. The emission of working gas excited by fast electrons penetrating the space in-between the electrodes during the ignition phase spread far outwards from the target at a speed of 24 km s{sup -1} in 1.3 Pa of Ar and at 7.5 km s{sup -1} in 1.3 Pa of N{sub 2}. The dense metal plasma created next to the target propagated in the reactor at a speed ranging from 0.7 to 3.5 km s{sup -1}, depending on the working gas composition and the pressure. In fact, it increased with higher N{sub 2} concentration and lower pressure. The form of the propagating plasma wave changed from a hemispherical shape in Ar, to a droplike shape extending far from the target in N{sub 2}. An important N{sub 2} emission rise in the latter case was detected during the transition at the end of the metal-dominated phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Confinement in PbSe wires grown by rf magnetron sputtering

Lead selenide (PbSe) nanowires were grown by magnetron sputtering on silicon with silicon dioxide (SiO{sub 2}/Si) substrates, and characterized by scanning electron microscopy, x-ray diffraction, Fourier transform infrared spectroscopy, photoluminescence, and x-ray photoelectron spectroscopy. Closely packed PbSe nanowires of approximately 100 nm diameter grew in the <111> rock-salt cubic structure orientation. These large wires showed a large blueshift in the luminescence and absorption compared to the bulk crystal, demonstrating quantum confinement. This is attributed to a strong built-in field due to surface states, band bending, and a depletion layer which confines the carrier states.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new magnetron based gas aggregation source of metal nanoclusters coupled to a double time-of-flight mass spectrometer system

A new magnetron based gas-aggregation source for continuous production of metal nanoclusters has been built and coupled to a double time-of-flight mass spectrometer system. The capability of the source to produce neutral, positive, and negative nanoclusters within one production cycle, particularly under the same optimized experimental conditions, has been tested. The source performs steadily for continuous long operations and has high beam intensity that would be preferable for size selective measurements in gas phase on individual nanoclusters. This paper describes on the instrumentation of the integrated complete experimental setup for gas-phase measurement on nanoclusters including the source. It reports on the production of copper nanoclusters using the source. Mass abundances of neutral and charged clusters have been investigated and the results are discussed with respect to reported results using various other types of sources. The experimental isotopic distributions of {sup 63}Cu versus {sup 65}Cu within individual cluster mass peaks have been derived and compared to corresponding theoretical profiles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Design and characterization of 2.45 GHz electron cyclotron resonance plasma source with magnetron magnetic field configuration for high flux of hyperthermal neutral beam

A 2.45 GHz electron cyclotron resonance (ECR) source with a magnetron magnetic field configuration was developed to meet the demand of a hyperthermal neutral beam (HNB) flux on a substrate of more than 1x10{sup 15} cm{sup -2} s{sup -1} for industrial applications. The parameters of the operating pressure, ion density, electron temperature, and distance between the neutralization plate and the substrate for the HNB source are specified in a theoretical analysis. The electron temperature and the ion density are measured to characterize the ECR HNB source using a Langmuir probe and optical emission spectroscopy. The parameters of the ECR HNB source are in good agreement with the theoretically specified parameters.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Flux and energy analysis of species in hollow cathode magnetron ionized physical vapor deposition of copper

To meet the stringent requirements of interconnect metallization for sub-32 nm technologies, an unprecedented level of flux and energy control of film forming species has become necessary to further advance ionized physical vapor deposition technology. Such technology development mandates improvements in methods to quantify the metal ion fraction, the gas/metal ion ratio, and the associated ion energies in the total ion flux to the substrate. In this work, a novel method combining planar Langmuir probes, quartz crystal microbalance (QCM), and gridded energy analyzer (GEA) custom instrumentation is developed to estimate the plasma density and temperature as well as to measure the metal ion fraction and ion energy. The measurements were conducted in a Novellus Systems, Inc. Hollow Cathode Magnetron (HCM{sup TM}) physical vapor deposition source used for deposition of Cu seed layer for 65-130 nm technology nodes. The gridded energy analyzer was employed to measure ion flux and ion energy, which was compared to the collocated planar Langmuir probe data. The total ion-to-metal neutral ratio was determined by the QCM combined with GEA. The data collection technique and the corresponding analysis are discussed. The effect of concurrent resputtering during the deposition process on film thickness profile is also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electrochemical Performance of rf Magnetron Sputtered LiCoO{sub 2} Thin Film Positive Electrodes

Thin films of LiCoO{sub 2} were grown by rf magnetron sputtering technique and studied the influence of In situ annealing treatment on microstructural and electrochemical properties of the films. Annealing treatment in presence of O{sub 2} ambient develops characteristic (104) plan in relative to (003) plane texture indicating that the films have HT-layered structure with R3-bar m symmetry. The effect is discussed in terms of grain size, cycling stability, reversibility and the specific discharge capacity.

36 MATERIALS SCIENCE↗