Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered Structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Patterns of gravity induced aggregate migration during casting of fluid concretes

In this paper, aggregate migration patterns during fluid concrete castings are studied through experiments, dimensionless approach and numerical modeling. The experimental results obtained on two beams show that gravity induced migration is primarily affecting the coarsest aggregates resulting in a decrease of coarse aggregates volume fraction with the horizontal distance from the pouring point and in a puzzling vertical multi-layer structure. The origin of this multi layer structure is discussed and analyzed with the help of numerical simulations of free surface flow. Our results suggest that it finds its origin in the non Newtonian nature of fresh concrete and that increasing casting rate shall decrease the magnitude of gravity induced particle migration.

36 MATERIALS SCIENCE↗

The structure of alkali silicate gel by total scattering methods

The structure of the alkali silicate gel (ASR) collected from the galleries of Furnas Dam in Brazil was determined by a pair distribution function (PDF) analysis of high energy X-ray diffraction data. Since this method is relatively new to concrete structure analysis a detailed introduction on the PDF method is given for glassy SiO{sub 2}. The bulk amorphous structure of the dam material is confirmed as no Bragg peaks are observed in the scattered intensity. The real space results show that the local structure of the amorphous material is similar to kanemite (KHSi{sub 2}O{sub 5}:3H{sub 2}O) however the long range layer structure of the crystal is broken up in the amorphous state, so that ordering only persists of the length scale of a few polyhedra. The silicate layer structure is a much more disordered than predicted by molecular dynamics models. The X-ray results are consistent with the molecular dynamics model of Kirkpatrick et al. (2005) [1] which predicts that most of the water resides in pores within the amorphous network rather than in layers. The total scattering data provide a rigorous basis against which other models may also be tested.

36 MATERIALS SCIENCE↗

pH-Driven Restructuring of Hydration Layers and Cation Ad-sorption at the Alumina-Water Interface

Oxide-water interfaces underpin ion separation, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. Yet, the molecular-scale link between pH-dependent surface protonation, hydration-layer structure, and counter-ion adsorption remains poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)-water interface in 10 mM Rb+ over pH 3-12. CTR measurements reveal two distinct adsorbed water layers at ~2.2 and ~3.5 Å above the surface that each shift toward the substrate at transition pHs near 6.5 and 10.6, respectively, directly reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb+ coverage and a decrease in mean adsorption height from ~3.5 to ~2.7 Å with increasing pH, indicating enhanced counter-ion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥3.5. This negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb+ coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid-base chemistry to ion binding distances at an oxide-water interface.

Electrical double layer (EDL), Surface protonation↗

pH-Driven Restructuring of Hydration Layers and Cation Adsorption at the Alumina–Water Interface

Oxide−water interfaces underpin ion separations, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. However, the molecular-scale links between pHdependent surface protonation, hydration-layer structure, and counterion adsorption remain poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)−water interface in 10 mM Rb + over pH 3−12. CTR measurements reveal two distinct adsorbed water layers at ∼2.2 and ∼3.5 Å above the surface. Each water layer shifts toward the substrate at transition pHs near 6.5 and 10.6, respectively, reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb + coverage and a decrease in mean adsorption height from ∼3.5 to ∼2.7 Å with increasing pH, indicating enhanced counterion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., the potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥ 3.5. The negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb + coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid−base chemistry to ion binding distances at an oxide−water interface.

Adsorption↗

Graphene device and method of using graphene device

An embodiment of a graphene device includes a layered structure, first and second electrodes, and a dopant island. The layered structure includes a conductive layer, an insulating layer, and a graphene layer. The electrodes are coupled to the graphene layer. The dopant island is coupled to an exposed surface of the graphene layer between the electrodes. An embodiment of a method of using a graphene device includes providing the graphene device. A voltage is applied to the conductive layer of the graphene device. Another embodiment of a method of using a graphene device includes providing the graphene device without the dopant island. A dopant island is placed on an exposed surface of the graphene layer between the electrodes. A voltage is applied to the conductive layer of the graphene device. A response of the dopant island to the voltage is observed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, structure, and spectroscopic characterization of three uranyl phosphates with unique structural units

Single crystals of Zn{sub 4}(OH){sub 2}[(UO{sub 2})(PO{sub 4}){sub 2}(OH){sub 2}(H{sub 2}O)] (UZnP), Cs[(UO{sub 2})(HPO{sub 4})NO{sub 3}] (UCsP), and In{sub 3}[(UO{sub 2}){sub 2}(PO{sub 4}){sub 4}OH(H{sub 2}O){sub 6}].2H{sub 2}O (UInP) were obtained from hydrothermal reactions and have been structurally and chemically characterized. UZnP crystallizes in space group Pbcn, a=8.8817(7), b=6.6109(5), c=19.569(1) A; UCsP crystallizes in P-1, a=7.015(2), b=7.441(1), c=9.393(2) A, {alpha}=72.974(2), {beta}=74.261(2), {gamma}=79.498(2); and UInP crystallizes in P-1, a=7.9856(5), b=9.159(1), c=9.2398(6) A {alpha}=101.289(1), {beta}=114.642(1), {gamma}=99.203(2). The U{sup 6+} cations are present as (UO{sub 2}){sup 2+} uranyl ions coordinated by five O atoms to give pentagonal bipyramids. The structural unit in UZnP is a finite cluster containing a uranyl pentagonal bipyramid that shares corners with two phosphate tetrahedra. The structural unit in UCsP is composed of uranyl pentagonal bipyramids with one chelating nitrate group that are linked into chains by three bridging hydrogen phosphate tetrahedra. In UInP, the structural unit contains pairs of edge-sharing uranyl pentagonal bipyramids with two chelating phosphate tetrahedra that are linked into chains through two bridging phosphate tetrahedra. Indium octahedra link these uranyl phosphate chains into a 3-dimensional framework. All three compounds exhibit unique structural units that deviate from the typical layered structures observed in uranyl phosphate solid-state chemistry. - Graphical abstract: Three new uranyl phosphates with unique structural units are reported. Black-Small-Square Highlights: Black-Right-Pointing-Pointer Three new uranyl phosphates have been synthesized hydrothermally. Black-Right-Pointing-Pointer Single crystal analyses reveal unique structural units. Black-Right-Pointing-Pointer The dimensionality of these compounds deviate from typical U{sup 6+} layered structures.

36 MATERIALS SCIENCE↗

Multimetallic Layered Composites (MMLCs) for Rapid, Economical Advanced Reactor Deployment (Final Report)

This project focused on the development of multi-metallic layered composites (MMLCs) for advanced fission reactor technologies. There are many instances where one alloy or material simply cannot meet all the demands thrown at it by a reactor system, or cannot allow it to perform as strongly as one would like. Instead of focusing all our effort on developing one perfect alloy, we seek to leverage the design principle of “separation of functionality,” used in many other arenas in design, to boost performance beyond single alloys alone. One illustrative example shows the power of this approach for molten salt-cooled reactors: A three meter tall, three meter diameter reactor vessel made of Incoloy 800 was quoted at $\$$500k in 2018. A Hastelloy N vessel was quoted at $\$$5M. An MMLC vessel, in which a layer of Hastelloy N would be weld-overlaid onto Incoloy 800, was quoted at $\$$700k, and it would achieve the same performance. The potential economic gains of leveraging this approach are therefore substantial. At a minimum, each MMLC would contain one core structural layer and one coolant-facing corrosion-resistant layer. Sometimes, MMLCs required buffer layers, as the structural and corrosion-resistant layers were metallurgically incompatible. In other words, they didn’t always play nice, thus separating layers compatible with both functioned as intermediaries to keep the composite together. However, in doing so we inevitably produce new interfaces, where new issues can arise. Therefore, this project focused on what happens at these interfaces from a combination of high temperatures, irradiation, corrosion, and time. After all, a reactor makes money when it is operating, and outages of any kind erode its economic viability. First, we set out to experimentally prove that MMLCs for at least two advanced reactor systems can be made, today, in US domestic facilities. In this respect we were successful – one MMLC (a Ni-201/Incoloy 800H composite) was successfully made and drawn into two-inch coolant piping. Others were attempted, though new issues relating to cracking in vanadium layers for one and radiation damage performance of the corrosion-resistant layer in another prevented us from moving further in those specific arenas – these are engineering problems which deserve continued focus after this project. Additional experimental work focused on long-term corrosion testing of the outermost layers of the salt-cooled and liquid lead-cooled MMLC concepts, which would then be fed into predictions of how long the MMLCs could last. Next, computational (thermodynamics and atomistic) simulation studies studied how much we expect the interfaces to “blend,” due to the mixing action of neutron irradiation. This eats into both the margin for the structural layer of each MMLC, as dilution from the corrosion-resistant layer into the structural layer would decrease the total load-bearing capacity of an MMLC of finite size. On the other hand, dilution of the corrosion-resistant layer into the structural layer further reduced the margin of corrodible material, reducing the lifetime of the MMLC or necessitating extra thickness to be imparted to the MMLC to meet its functional requirements. Work here focused on irradiation-induced segregation to predict new phases which may embrittle the MMLCs, as well as quantifying irradiation-induced mixing at each interface. The results showed that mixing is expected, but it is both steady and therefore predictable, and not lifetime-limiting for most MMLC concepts – it simply has to be accounted for in calculations of reactor performance when utilizing an MMLC. Then, full-core simulations using the experimentally-derived corrosion data, the computationally discovered irradiation-induced mixing data (partially validated by experiment), and existing, benchmarked core designs for large and small sized reactor concepts (one salt-cooled, one lead-cooled) were conducted to quantify any expansion of reactor operating envelopes achieved by utilizing these MMLCs. This new framework, called REX (Reactor Envelope Expansion), incorporates a combination of core neutronics, thermal hydraulics, and the material performance data derived from this project to see how using an MMLC expands advanced fission reactor operating envelopes. It was discovered that in some cases, MMLC utilization does indeed increase the maximum operating temperatures and cycle lengths of reactor concepts, while in other cases it does not. Finally, our tech-to-market (T2M) strategy was not necessarily to create specific embodiments of MMLCs for immediate sale (because getting into the nuclear market is incredibly slow and laden with regulation, this is a long-term goal), but rather immediate stimulation of US industry using the design approach of MMLCs derived from this project. In this respect we were successful, as one of the PhD students funded on this project co-founded Allium Engineering, Inc., which created a stainless steel / low-alloy steel MMLC to function as chloride corrosion-resistant rebar for embedding into concrete structures. Allium Engineering continues to be successful, having recently opened their first factory as of this writing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dielectric and ferroelectric properties of lanthanum doped SrBi{sub 4}Ti{sub 4}O{sub 15} ferroelectric ceramics

Bismuth layer structure ferroelectrics (BLSFs) have attracted intensive investigation for the potential use in non volatile ferroelectric random access memory (FeRAM) and piezoelectric devices suitable at high temperature. Bismuth layered structured compounds with general formula of (Bi{sub 2}O{sub 2}){sup 2+} (A{sub m-1}B{sub m}O{sub 3m+1}){sup 2-} are firstly found by Aurivillius. The structure of these compounds can be described as pseudo-perovskite (A{sub m-1}B{sub m}O{sub 3m+1}){sup 2-} slabs separated by (Bi{sub 2}O{sub 2}){sup 2+} layers along the crystallographic c-axis. The 12-coordinated A site can be occupied by such cations as La{sup 3+}, Bi{sup 3+}, Ba{sup 2+}, Sr{sup 2+}, Pb{sup 2+}, Ca{sup 2+}, Na{sup +}, etc. While the octahedral-coordinated B site can be occupied by W{sup 6+}, Nb{sup 5+}, Ta{sup 5+}, Ti{sup 4+} etc. Lanthanum substituted BiT (Bi{sub 4}Ti{sub 4}O{sub 12}) known as BLT has been extensively investigated. With this substitution, BLT shows relatively large P{sub r}, low synthesis temperature and good fatigue endurance which makes it a potential candidate for FeRAM application. So, lanthanum doping is an effective way to improve the ferroelectric and fatigue properties of Bi{sub 4}Ti{sub 4}O{sub 12}. Lanthanum doped Bismuth layer structure ferroelectrics (BLSFs) ceramics SrBi{sub 4-x}La{sub x}Ti{sub 4}O{sub 15} (x=0, 0.025, 0.050, 0.075, 0.1) were prepared by solid state reaction method. X-ray diffraction pattern showed that single phase was formed when x=0-0.1. Morphological studies were carried out by SEM analysis. It was found that crystal lattice constant, dielectric and electrical properties of SBT ferroelectrics varied appreciably with amount of doping. Dielectric measurements in the frequency range 100Hz-1MHz were made using an impedance analyzer (Wayne Kerr 6500P) and the measurements were carried out from RT to 600 deg C. The ferroelectric hysteresis loop was traced at room temperature by a standard P-E loop tracer based on sawyer-tower circuit. The values of 2P{sub r} and E{sub c} for pure and lanthanum doped SBT are given. The above results indicate that La{sup 3+} modification is an effective way to improve the ferro electrical properties of SrBi{sub 4}Ti{sub 4}O{sub 15}. The transition temperature (T{sub c}) and dielectric constant for SrBi{sub 4}Ti{sub 4}O{sub 15} are given. It is observed that with the increasing of lanthanum content remnant polarization increases and coercive field decreases. It is believed that these materials are potentially attractive candidates for FeRAM industry.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and nonlinear optical property of Rb{sub 3}V{sub 5}O{sub 14}

The new nonlinear optical crystal Rb{sub 3}V{sub 5}O{sub 14} has been synthesized by solid state reaction and characterized by single-crystal X-ray diffraction, IR and thermogravimetric analysis. The crystal Rb{sub 3}V{sub 5}O{sub 14} crystallizes in the trigonal system with space P31m (No. 157), a=b=8.7134(12) A, c=5.2807(11) A and {alpha}=90{sup o}, {beta}=90{sup o}, {gamma}=120{sup o}, Z=1, {rho}=3.516 g/cm{sup 3}. It is a layered structure that is very flat and strongly parallel to c. The V{sub 5}O{sub 14} layer structure consists of corner-linked square and triangular pyramids. The layers are separated by Rb{sup +} ions, which fit equally well on the V{sub 5}O{sub 14} layer. The Kurtz powder SHG measurement, using 1064 nm radiation, showed that the second-harmonic generation efficiency of Rb{sub 3}V{sub 5}O{sub 14} is about two times that of KDP. -- Graphical abstract: The new nonlinear optical crystal Rb{sub 3}V{sub 5}O{sub 14} has been synthesized by solid state reaction and characterized by single-crystal X-ray diffraction, IR and thermogravimetric analysis. The crystal Rb{sub 3}V{sub 5}O{sub 14} crystallizes in the trigonal system with space P31m (No. 157), a=b=8.7134(12) A, c=5.2807(11) A and {alpha}=90{sup o}, {beta}=90{sup o}, {gamma}=120{sup o}, Z=1, {rho}=3.516 g/cm{sup 3}. It is a layered structure that is very flat and strongly parallel to c. The Kurtz powder SHG measurement, using 1064 nm radiation, showed that the second-harmonic generation efficiency of Rb{sub 3}V{sub 5}O{sub 14} is about two times that of KDP. Display Omitted

36 MATERIALS SCIENCE↗

Investigation on three new metal carboxydiphosphonates: Syntheses, structures, magnetic and luminescent properties

A new multifunctionalized phosphoric acid, (2-(diphosphonomethylamino)nicotinic acid, Py(COOH)(NHCH--(PO{sub 3}H{sub 2}){sub 2}), H{sub 5}L{sup 1}), has been employed as ligand for the construction of new metal phosphonates. By reacting it with different metal chlorides under hydrothermal condition, three new transition metal phosphonates, namely, [Co{sub 2}(HL{sup 1})(H{sub 2}O){sub 5}][H{sub 2}O]{sub 3} (1), Zn(H{sub 3}L{sup 1}) (2) and [Cd(H{sub 3}L{sup 1})(H{sub 2}O){sub 2}][H{sub 2}O] (3) were successfully obtained. The single-crystal structure measurements indicated that the coordination mode of ligand H{sub 5}L{sup 1} is metal-dependant and results in different structures. For compound 1, it features 2D layered structure. Whereas compounds 2 and 3 have 1D chain structures. Under the excitation of 250 nm light, both compounds 2 and 3 show intraligand and ligand to metal charge transfer (LMCT) emission bands at about 415 and 420 nm, respectively. Magnetic study shows that compound 1 displays antiferromagnetic behavior. - Graphical abstract: Three new metal phosphonates were synthesized from a multifunctionalized phosphonate ligand and different metal chlorides. Their structures, thermal stabilities, luminescent and magnetic properties were characterized. Highlights: Black-Right-Pointing-Pointer Three new metal phosphonates were synthesized under hydrothermal conditions. Black-Right-Pointing-Pointer Compound 1 exhibits 2D layered structure. Black-Right-Pointing-Pointer Compounds 2 and 3 have 1D infinite chain structures. Black-Right-Pointing-Pointer Compound 1 displays antiferromagnetic behavior. Black-Right-Pointing-Pointer Compounds 2 and 3 show intraligand and ligand to metal charge transfer emission bands.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and photoluminescent properties of four lanthanide 5-nitroisophthalate coordination polymers

Four new lanthanide coordination polymers, [Y(Hnip)(nip)(H{sub 2}O)].H{sub 2}O (1), [Ln(Hnip)(nip)(H{sub 2}O){sub 2}].2H{sub 2}O [Ln=Eu(2), Tb(3)] and [Y(nip){sub 2}].(H{sub 2}4,4'-bpy){sub 0.5} (4) [5-nip=5-nitroisophthalate, 4,4'-bpy=4,4'-bipyridine], have been hydrothermally synthesized and structurally characterized. Compound 1 features novel lanthanide-carboxylate groups chains composed of three samehanded helical strands intersecting each other through hinged lanthanide atoms, and these chains are cross-linked by phenylene moieties of carboxylate ligands into a 2D layer structure. Compounds 2 and 3 are isomorphous, and contain 1D catenanelike Ln-O-C-O-Ln chains, which are interconnected by phenylene moieties into 2D layer structures. Compound 4, however, displays a 3D architecture sustained by strong hydrogen bonding interactions between the protonated 4,4'-bpy and the carboxyl oxygen atom from [Y{sub 2}(nip){sub 4}]{sup 2-} with 2D layer structure, and 4,4'-bpy as the guest molecules exist in bilayer channel. The studies for the thermal stabilities of the four compounds show that compound 4 is more stable than other compounds. Compound 2 emits characteristic red luminescence of Eu{sup 3+} ions at room temperature, and its luminescent lifetime and quantum efficiency has been determined. - Graphical abstract: Four lanthanide 5-nitroisophthalate coordination polymers have been hydrothermally prepared and resent different structures and thermal stabilities and photoluminescence properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Double layer-like structures in the core of an argon helicon plasma source with uniform magnetic fields

A hot (T{sub e} ≈ 10 eV) electron population is observed in the core of a 3 mTorr argon helicon plasma source at 500 W RF power and 900 G uniform axial magnetic field strength, 12 cm from the edge of the helicon antenna. A double layer-like structure consisting of a localized axial electric field of approximately 8 V/cm over 1–2 cm is observed adjacent to the hot electron population. The potential step generated by the electric field is shown to be large enough to trap the hot electrons. To our knowledge this is the first observation of these structures in the core of a helicon discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Two Ce-containing 3D metal–organic frameworks: In situ formation of ligand (DDPD)

Hydrothermal reactions of cerium nitrate and 5-hydroxyisophthalic acid (OH-H{sub 2}BDC) produce two new metal–organic frameworks (MOFs), ([Ce(DDPD){sub 1.5}(H{sub 2}O){sub 2.5}]·4H{sub 2}O){sub n} (1) and ([Ce(OH-BDC)(OH-HBDC)(H{sub 2}O){sub 2}]·2H{sub 2}O]{sub n} (2) (DDPD(II)=5,10-dioxo-5,10-dihydro-4,9-dioxapyrene-2,7-dicarboxylate(II)). These two complexes have been characterized by elemental analysis, IR, TG, and single-crystal X-ray diffraction. It was remarkable that the in situ reaction of OH-H{sub 2}BDC to DDPD(II) was found in complex 1. In 1, Ce(III) ions are bridged by DDPD ligands to form infinite 1D chain, which is further connected via DDPD ligands to form 3D structure. Complex 2 possesses a neutral noninterpenetrating 2D layer structure. Furthermore, the fluorescence properties and magnetic behavior of 1 and 2 have been investigated. - Graphical abstract: In complex 1, the in situ reaction of OH-H{sub 2}BDC to DDPD(II) was found. Complex 1 features a 3D network structure. Adjacent Ce(III) ions are bridged by two carboxylate groups to form a 1D infinite inorganic chain, and further linked by the DDPD(II) ligands. Display Omitted - Highlights: • Complexes 1 and 2 was synthesized via hydrothermal methods. • In situ reaction of OH-H{sub 2}BDC to DDPD(II) was found in complex 1. • Ce(III) ions are bridged by the DDPD(II) ligands to generate a 3D structure in complex 1. • Complex 2 possesses a neutral noninterpenetrating 2D layer structure. • Fluorescent properties and magnetic behavior of 1 and 2 have been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyrite shrink-film laminate as a hydroxyl radical generator

Disclosed are hydroxyl radial generating devices, comprising: a substrate layer; and a pyrite layer configured to produce hydroxyl radicals. Another aspect relates to a method for producing a hydroxyl radical generating device, comprising: providing a polymeric substrate layer; placing a layer of pyrite on a surface of the polymeric substrate layer to form a multi-layer structure; and applying heat to the multi-layer structure such that at least the surface of the polymeric substrate layer contracts; wherein the layer of pyrite contracts to a lesser extent than the surface of the polymeric substrate layer providing a textured surface comprising the pyrite layer. Also disclosed is a method of analysis, comprising: placing a solution comprising a biological substance on a sample site of a hydroxyl generating device comprising a surface of pyrite; incubating the solution; and analyzing a sample including proteolytic fragments of the biological substance.

Brenowitz, Michael David↗

The synthesis and characterisation of LaCa{sub 2}Fe{sub 2}GaO{sub 8}

The synthesis and characterisation of LaCa{sub 2}Fe{sub 2}GaO{sub 8} is described. Neutron powder diffraction data reveal LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts an anion-vacancy ordered, 'triple layer' structure consisting of an OOT{sub L}OOT{sub R} stacking sequence of layers of (Fe/Ga)O{sub 6} octahedra (O) and (Fe/Ga)O{sub 4} tetrahedra (T), related to that of the 4-layer brownmillerite structures (a=5.4784(1) A, b=22.6780(4) A, c=5.6007(1) A, space group Pbma). The apex-linked chains of tetrahedra within structure of LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibit a cooperative twisting distortion which alternates in direction between adjacent layers of tetrahedra, the first time such an arrangement has been seen in a triple-layer phase. Magnetisation and neutron diffraction data reveal that LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibits two magnetic ordering transitions. On cooling below 550 K the phase adopts a state with short range antiferromagnetic coupling within each double layer of (Fe/Ga)O{sub 6} octahedra, but only weak coupling between layers. On cooling below 470 K full three-dimensional, G-type antiferromagnetic order is observed. - Graphical abstract: LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts an anion-vacancy ordered, 'triple layer' structure consisting of an OOT{sub L}OOT{sub R} stacking sequence of layers of FeO{sub 6} octahedra (O) and GaO{sub 4} tetrahedra (T), in which the chains of apex-linked tetrahedra exhibit a cooperative twisting distortion which alternates in direction between adjacent layers of tetrahedra. On cooling below 550 K, LaCa{sub 2}Fe{sub 2}GaO{sub 8} adopts a state with strong two-dimensional antiferromagnetic order within each double layer of FeO{sub 6} octahedra, but only weak coupling between layers. On cooling below 470 K full three-dimensional antiferromagnetic order is observed. Highlights: Black-Right-Pointing-Pointer LaCa{sub 2}Fe{sub 2}GaO{sub 8} exhibits a novel anion-vacancy ordered triple-layer structure type. Black-Right-Pointing-Pointer New structure variant rationalised on the basis of strucutral parameters. Black-Right-Pointing-Pointer Multiple magnetic transitions: paramagnetic-two-dimensional-three-dimensional.

36 MATERIALS SCIENCE↗

Synthesis, structure and characterization of two new open-framework gallium phosphite-oxalates of varying dimensionality

Using N, N-dimethyl-piperazine as structure directing agent, two new gallium phosphite-oxalates [Ga{sub 2}(HPO{sub 3}){sub 2}(H{sub 2}PO{sub 3}){sub 2}(C{sub 2}O{sub 4})](C{sub 6}N{sub 2}H{sub 16}) (I) and [Ga{sub 2}(HPO{sub 3}){sub 2}(H{sub 2}PO{sub 3})(C{sub 2}O{sub 4})](C{sub 6}N{sub 2}H{sub 16}){sub 0.5} (II) have been synthesized under solvothermal and hydrothermal conditions, respectively and further characterized by powder X-ray diffraction, IR spectroscopy, TGA, ICP-AES and elemental analyses. Single crystal X-ray diffraction reveals that the striking feature of I and II is that they possess the same second building unit (SBU) Ga{sub 2}P{sub 2} constructed from two GaO{sub 6} octahedra and two [HPO{sub 3}{sup 2−}] pseudo-pyramids sharing oxygen atoms. However, due to the different connecting fashions of SBUs, [C{sub 2}O{sub 4}{sup 2−}] groups and [H{sub 2}PO{sub 3}{sup −}] pseudo-pyramids, the final frameworks of them are distinctly different. Compound I shows 2D layered structures with 8-membered ring (8-MR) windows in the ab plane while compound II presents a 3D open-framework with 8-MR channels along the b axis. - Graphical abstract: Using N, N-dimethyl-piperazine as structure directing agent, two new gallium phosphite-oxalates I showing 2D layered structure and II presenting 3D open-framework have been synthesized under solvothermal and hydrothermal conditions, respectively. - Highlights: • Using N, N-dimethyl-piperazine as structure directing agent, two new gallium phosphite-oxalates have been synthesized under solvothermal and hydrothermal conditions, respectively. • The same second building unit (SBU) is displayed in both compounds. • Compound I shows 2D layered structure with 8-MR windows while compound II presents 3D open-framework with 8-MR channels. • The solvent plays an important role on the formation of microporous compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation effects and interphase interactions in ohmic and barrier contacts to indium phosphide as induced by rapid thermal annealing and irradiation with {gamma}-ray {sup 60}Co photons

The radiation resistance of Au-Pd-Ti-Pd-n{sup ++}-InP ohmic contacts and Au-TiB{sub x}-n-n{sup +}-n{sup ++}-InP barrier contacts-both initial and subjected to a rapid thermal annealing and irradiated with {sup 60}Co {gamma}-ray photons with doses as high as 10{sup 9} R-has been studied. Before and after external effects, the electrical characteristics of the barrier and ohmic contacts, distribution profiles for components, and phase composition in the metallization layers have been measured. In ohmic Pd-Ti-Pd-Au contacts subjected to rapid thermal annealing and irradiation, a significant distortion of the layered structure of metallization occurs; this distortion is caused by the thermal and irradiation-stimulated transport of Pd over the grain boundaries in polycrystalline Ti and Au films. However, the specific contact resistance {rho}{sub c} does not change appreciably, which is related to a comparatively unvaried composition of the contact-forming layer at the Pd-n{sup +}-InP interface. In the initial sample and the sample subjected to the rapid thermal annealing at T = 400 deg. C with the Au-TiB{sub x}-n-n{sup +}-n{sup ++}-InP barrier contacts and irradiated with the dose as high as 2 x 10{sup 8} R, a layered structure of metallization is retained. After irradiation with the dose as high as 10{sup 9} R, in the samples subjected to a rapid thermal annealing at T = 400 deg. C, the layered structure of metallization becomes completely distorted; however, this structure is retained in the initial sample. The electrical properties of the contact structure appreciably degrade only after irradiation of the sample preliminarily subjected to a rapid thermal annealing at T = 400 deg. C.

36 MATERIALS SCIENCE↗

Layer-Dependent Electronic Structure of Atomically Resolved Two-Dimensional Gallium Selenide Telluride

Alloying two-dimensional (2D) semiconductors provides a powerful method to tune their physical properties, especially those relevant to optoelectronic applications. However, as the crystal structure becomes more complex, it becomes increasingly difficult to accurately correlate response characteristics to detailed atomic structure. We investigate, via annular dark-field scanning transmission electron microscopy, electron energy loss spectroscopy, and second harmonic generation, the layered III-VI alloy GaSe 0.5 Te 0.5 as a function of layer number. The local atomic structure and stacking sequence for different layers is explicitly determined. We complement the measurements with first-principles calculations of the total energy and electronic band structure of GaSe 0.5 Te 0.5 for different crystal structures and layer number. The electronic band gap as well as the π and π + σ plasmons are found to be sensitive to layer number.

2D semiconductor alloys↗