Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LST”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

An Evaluation of Reaction Wheel Emitted Vibrations for Large Space Telescope

Emitted force and torque vibration were measured in three axes for three Sperry reaction wheels. Data were taken for both hard and soft mounts; tests were conducted at constant speeds and during runup-rundown over a 0 to 5000 rpm range. A FSC, 7 ft-lb-sec and HEAO, 30 ft-lb-sec ball bearing reaction wheel and a model magnetic bearing were tested. Data analysis was conducted to identify the principal resonances in the 10 to 120 Hz region. Although some particular phenomena remain unexplained, in general good agreement is attained between the analytical predictions and test data. Predictions were also made of the expected emitted vibrations for an LST sized ball bearing and magnetic bearing reaction wheel using engineering judgment and the test data obtained. Additional tests were also run on the 101H duplex bearing pairs used in the reaction wheel suspension to determine bearing stiffness characteristics in the pre-breakaway zero speed region.

Source record↗
NASA NTRS1975

Wavefront error simulator for evaluating optical testing instrumentation

A wavefront error simulator has been designed and fabricated to evaluate experimentally test instrumentation for the Large Space Telescope (LST) program. The principal operating part of the simulator is an aberration generator that introduces low-order aberrations of several waves magnitude with an incremented adjustment capability of lambda/100. Each aberration type can be introduced independently with any desired spatial orientation.

Golden, L. J.↗
NASA NTRS1975

Large Space Telescope - Orbital crew EV maintenance operations

The paper shows that orbital EV maintenance by the crew has a tremendous impact on several areas of the program, including operations, Shuttle interfaces, support equipment rendezvous and berthing, checkout and verification, levels of servicing achievable, logistics and spares and scientific instruments in order to permit changeout and possible future refurbishment. To achieve on-orbit EV maintenance, such challenges as designing for suited-astronaut access to all subsystem equipment elements, minimization for contamination, handling of extremely sensitive instruments, development of translation techniques, and use of existing GFE and hardware must be faced early in the preliminary design and operations analysis phases. All studies to date indicate that on-orbit EV manned maintenance of the LST (Large Space Telescope) is not only feasible but can be designed to be readily within the capability of the EV functioning astronaut. Both 1-g and neutral buoyancy man-in-the-loop simulations further support this point.

Fisher, H. T.↗
NASA NTRS1975

High resolution spectrograph

The high resolution spectrograph (HRS) is designed to be used with the Large Space Telescope (LST) for the study of spectra of point and extended targets in the spectral range 110 to 410 nm. It has spectral resolutions of 1,000; 30,000; and 100,000 and has a field of view as large as 10 arc sec. The spectral range and resolution are selectable using interchangeable optical components and an echelle spectrograph is used to display a cross dispersed spectrum on the photocathode of either of 2 SEC orthicon image tubes. Provisions are included for wavelength calibration, target identification and acquisition and thermal control. The system considerations of the instrument are described.

Peacock, K.↗
NASA NTRS1975

Thermo/structural design considerations to achieve the Large Space Telescope line-of-sight requirements

The Large Space Telescope (LST) which is scheduled for launch in 1982, is a long-life, precision-pointing, earth-orbiting satellite requiring a structural system that provides high dimensional stability, minimum thermal distortion, and minimum response to onboard dynamic environments (e.g., reaction wheels). The results of a detailed thermostructural finite element computer analysis show that the telescope structure, even though fabricated from a material with a zero coefficient of thermal expansion, must be isolated from the external structure by a three-point support (flex joints or spherical bearings will accomplish this). Other thermo/structural analysis of the metering structure showed that second-order deformations have a significant effect on the alignment of the primary and secondary mirrors.

Tenerelli, D. J.↗
NASA NTRS1975

Data management for Large Space Telescope

The data management system for the Large Space Telescope (LST) must be capable of meeting requirements of 160 million bits per 95 min orbit with a bit error rate of less than 0.00001 for data. The system will be supported by the Tracking and Data Relay Satellite System of the Space Tracking and Data Network. The on-board system includes a general purpose computer that controls the vehicle as a stable observation platform and the array of instruments used for data collection. The ground-based system comprises a Mission Operations Center (MOC), a Science Institute where instrument data is processed, and a communications service for the space and point-to-point data flow. The allocation of hardware and software between on-board and ground-based components to achieve design objectives of maximum flexibility at minimum cost is discussed.

Hope, G. R., Jr.↗
NASA NTRS1975

Time domain desensitized specific optimal system design

A digital computer algorithm for desensitized specific optimal system design for general time-invariant nonlinear systems is presented. The algorithm utilizes a technique of partitioning and uncoupling of the original specific closed-loop system state and sensitivity equations into linear, nonlinear, and control subsystems. Results of the application of the algorithm in the design of a Saturn V Launch Vehicle analog attitude control system and an LST image motion compensation digital controller are given.

Henson, T. F.↗
NASA NTRS1976

Control by model error estimation

Modern control theory relies upon the fidelity of the mathematical model of the system. Truncated modes, external disturbances, and parameter errors in linear system models are corrected by augmenting to the original system of equations an 'error system' which is designed to approximate the effects of such model errors. A Chebyshev error system is developed for application to the Large Space Telescope (LST).

Likins, P. W.↗
NASA NTRS1976

Optimal maneuvering and fine pointing control of large space telescope with a new magnetically suspended, single gimballed momentum storage device

This paper considers the application of an Annular Momentum Control Device (AMCD) to both fine pointing and large-angle maneuvering of a large space telescope (LST). The AMCD, which consists principally of a spinning rim suspended in noncontacting electromagnetic bearings, represents a new development in momentum storage devices. A nonlinear mathematical model of the AMCD/LST system is derived. An optimal stochastic fine-pointing controller is designed via LQG theory and the minimum-energy maneuvering problem is solved via a gradient technique. Number of state variable and control variable constraints, as well as all trigonometric nonlinearities, are considered in the latter part.

Nadkarni, A. A.↗
NASA NTRS1977

Development of shuttle payloads

The development of payloads for the Shuttle is described in terms of two activities - one is oriented towards development of payload hardware, while the other is oriented towards the development of payload/Space Transportation System (STS) planning, scheduling, and integration techniques. This second activity is called STS Utilization Planning (SUP). In addition to describing the major aspects of SUP, a discussion of development activities on three payloads that typify direct Shuttle placement missions is included. These payloads are the First Spacelab Mission, the Atmospheric, Magnetospheric, and Plasmas in Space (AMPS) payload, and the Large Space Telescope (LST).

Murphy, J. T.↗
NASA NTRS1977

Extension of atomic nitrogen measurements into the lower thermosphere

Special operating modes of the open source neutral mass spectrometer (OSS) on the Atmosphere Explorer C permit the measurement of odd nitrogen (N + NO) number densities between 180 and 450 km. By using optical measurements of NO concentrations from the ultraviolet nitric oxide experiment on AE-C, number densities of N are obtained. Altitude profiles for the midlatitude legs of three orbits in the late spring of 1974 are presented and compared with densities predicted by the AE-C (OSS) empirical N model at 375 km. Atomic nitrogen appeared to be in diffusive equilibrium at least above 200 km in each of the orbits studied. A typical number density of N at 200 km, 0900 LST, and 40 deg N latitude in late May 1974 is 30 million per cu cm.

Engebretson, M. J.↗
NASA NTRS1977

Optimal fine pointing control of a large space telescope using an Annular Momentum Control Device

This paper discusses the application of an Annular Momentum Control Device (AMCD) to fine pointing control of a large space telescope (LST). The AMCD represents a new development in the field of momentum storage devices. A linearized mathematical model is developed for the AMCD/LST system, including the magnetic suspension actuators. Two approaches to control system design are considered. The first approach uses a stochastic linear-quadratic Gaussian controller which utilizes feedback of all states. The second approach considers a more practical control system design in which the axial and radial loops are designed independently.

Nadkarni, A. A.↗
NASA NTRS1979

Design, processing and testing of LSI arrays, hybrid microelectronics task

Mathematical cost models previously developed for hybrid microelectronic subsystems were refined and expanded. Rework terms related to substrate fabrication, nonrecurring developmental and manufacturing operations, and prototype production are included. Sample computer programs were written to demonstrate hybrid microelectric applications of these cost models. Computer programs were generated to calculate and analyze values for the total microelectronics costs. Large scale integrated (LST) chips utilizing tape chip carrier technology were studied. The feasibility of interconnecting arrays of LSU chips utilizing tape chip carrier and semiautomatic wire bonding technology was demonstrated.

Himmel, R. P.↗
NASA NTRS1980

Thermography for estimating near-surface soil moisture under developing crop canopies

Previous investigations of thermal infrared techniques using remote sensors (thermography) for estimating soil water content have been limited primarily to bare soil. Ground-based and aircraft investigations were conducted to evaluate the potential for extending the thermography approach to developing crop canopies. A significant exponential relationship was found between the volumetric soil water content in the 0-4 cm soil layer and the diurnal difference between surface soil temperature measured at 0230 and 1330 LST (satellite overpass times of NASA's Heat Capacity Mapping Mission - HCMM). Surface soil temperatures were estimated using minimum air temperature, percent cover of the canopy and remote measurements of canopy temperature. Results of the investigation demonstrated that thermography can potentially be used to estimate soil temperature and soil moisture throughout a complete growing season for a number of different crops and soils.

Heilman, J. L.↗
NASA NTRS1983

Genesis of tornadoes associated with hurricanes

The climatological history of hurricane-tornadoes is brought up to date through 1982. Most of the tornadoes either form near the center of the hurricane, from the outer edge of the eyewall outward, or in an area between north and east-southeast of the hurricane center. The blackbody temperatures of the cloud tops which were analyzed for several hurricane-tornadoes that formed in the years 1974, 1975, and 1979, did not furnish strong precursor signals of tornado formation, but followed one of two patterns: either the temperatures were very low, or the tornado formed in areas of strong temperature gradients. Tornadoes with tropical cyclones most frequently occur at 1200-1800 LST, and although most are relatively weak, they can reach the F3 intensity level. Most form in association with the outer rainbands of the hurricane.

Gentry, R. C.↗
NASA NTRS1985

Satellite measurements of surface albedo and temperatures in semi-desert

Measurements of surface parameters in an arid steppe (the semi-desert of the northern Sinai) were made from the NOAA-6 satellite to assess the effects of the vegetation recovery in a fenced-off area. The radiances measured in the solar wavelengths over the vegetated area were about 25 percent lower than those measured over the surrounding bare sandy soil (where the surface albedo measured from Landsat is about 0.42). This implies a reduction in the albedo by the vegetation also by about 25 percent if both surfaces are regarded as Lambertian, but by as much as 42 percent if the vegetated area is modeled as a plane of soil with vertically protruding plants. The radiation temperatures in the 11 micron channel at approximately 0730 LST measured over the vegetated area were by as much as 2.5 K higher than over the surrounding sands.

Otterman, J.↗
NASA NTRS1985

Replacing a technology - The Large Space Telescope and CCDs

The technological improvements, design choices and mission goals which led to the inclusion of CCD detectors in the wide field camera of the Large Space Telescope (LST) to be launched by the STS are recounted. Consideration of CCD detectors began before CCDs had seen wide astronomical applications. During planning for the ST, in the 1960s, photographic methods and a vidicon were considered, and seemed feasible provided that periodic manual maintenance could be performed. The invention of CCDs was first reported in 1970 and by 1973 the CCDs were receiving significant attention as potential detectors instead of a vidicon, which retained its own technological challenges. The CCD format gained new emphasis when success was achieved in developments for planetary-imaging spacecraft. The rapidity of progress in CCD capabilities, coupled with the continued shortcomings of the vidicon, resulted in a finalized choice for a CCD device by 1977. The decision was also prompted by continuing commercial and military interest in CCDs, which was spurring the development of the technology and improving the sensitivities and reliability while lowering the costs.

Smith, R. W.↗
NASA NTRS1986

Diurnal variation of outgoing longwave radiation in the tropics

The diurnal harmonic in longwave emission in the tropical belt (30 deg N-30 deg S) is estimated from nine years of NOAA polar-orbiting satellite data. The results are compared successfully with Nimbus-7 ERB scanner data and with GOES-West geosynchronous satellite data. An interesting and consistent diurnal variation in longwave emission is found over the regions of intense oceanic convection, such as the ITCZ and SPCZ regions, with a peak-to-peak variation of 6-8 W/sq m and a maximum in the morning (0600-1200 LST). Histogram analysis indicates that this variation is associated with a diurnal variation in convective cloud (about 400 mb). Over regions of very intense convection, a diurnal variation of very high clouds (above 100 mb), which is out of phase with the variations at lower levels in the atmosphere, reduces the magnitude of the diurnal harmonic in longwave emission. It is interesting that histograms based on data averaged over 8-km and 250-km boxes give the same qualitative information about cloud and emission variability.

Hartmann, D. L.↗