Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LIME”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Control of gallium incorporation in sol–gel derived CuIn{sub (1−x)}Ga{sub x}S{sub 2} thin films for photovoltaic applications

Highlights: • CuIn{sub (1−x)}Ga{sub x}S{sub 2} thin films were prepared by sol–gel process. • Evolution of lattice parameters is characteristic of a solid solution. • Optical band gap was found to be linearly dependent on the gallium rate. - Abstract: In this paper, we report the elaboration of Cu(In,Ga)S{sub 2} chalcopyrite thin films via a sol–gel process. To reach this aim, solutions containing copper, indium and gallium complexes were prepared. These solutions were thereafter spin-coated onto the soda lime glass substrates and calcined, leading to metallic oxides thin films. Expected chalcopyrite films were finally obtained by sulfurization of oxides layers using a sulfur atmosphere at 500 °C. The rate of gallium incorporation was studied both at the solutions synthesis step and at the thin films sulfurization process. Elemental and X-ray diffraction (XRD) analyses have shown the efficiency of monoethanolamine used as a complexing agent for the preparation of CuIn{sub (1−x)}Ga{sub x}S{sub 2} thin layers. Moreover, the replacement of diethanolamine by monoethanolamine has permitted the substitution of indium by isovalent gallium from x = 0 to x = 0.4 and prevented the precipitation of copper derivatives. XRD analyses of sulfurized thin films CuIn{sub (1−x)}Ga{sub x}S{sub 2,} clearly indicated that the increasing rate of gallium induced a shift of XRD peaks, revealing an evolution of the lattice parameter in the chalcopyrite structure. These results were confirmed by Raman analyses. Moreover, the optical band gap was also found to be linearly dependent upon the gallium rate incorporated within the thin films: it varies from 1.47 eV for x = 0 to 1.63 eV for x = 0.4.

36 MATERIALS SCIENCE↗

Annealing induced microstructure engineering of antimony tri-selenide thin films

Highlights: • Deposition of Sb{sub 2}Se{sub 3} thin films using thermal vapour deposition. • Films are deposited on substrates with concurrent heating and without heating. • Effect of post deposition annealing on the two types of films are investigated. • Influence of temperature and processing conditions on optical band gap are probed. • This Sb{sub 2}Se{sub 3} films can find application in solar cells and optoelectronic devices. - Abstract: The presented work demonstrates the effect of annealing on the structural, surface morphology and optical properties of Antimony Triselenide (Sb{sub 2}Se{sub 3}) thin films deposited by thermal evaporation. Two sets of thin films of Sb{sub 2}Se{sub 3} were grown on soda lime glass (SLG) substrates by thermal evaporation with and without substrate heating. Both sets of films were then annealed at three distinct temperatures (100 °C, 200 °C and 300 °C) to study the effects of annealing on the microstructure. Analysis using XRD (X-Ray Diffraction) characterization revealed that the as-deposited films without substrate heating exhibit an amorphous nature, whereas the films grown with concurrent substrate heating are polycrystalline with orthorhombic structure. The films annealed at high temperature with concurrent substrate heating possess smooth and continuous grain morphologies. The effect of annealing was also found to have significant impact on the band gap and optical properties of the Sb{sub 2}Se{sub 3} thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Oxygen deficiency induced nickel based oxides for UV & IR sensitive photo-conductive devices

Ni(NO{sub 3}){sub 3}.6H{sub 2}O has been thermally decomposed to synthesize NiO{sub x} (0 3-δ synthesis. These metal oxides have been characterized by XRD, SEM, TEM, XPS and UV–vis spectroscopy for the determination of their crystal structures, structural morphologies, oxidation states and optical band gaps. The devices, made of nanocrystalline-composites or nanocomposites, have been fabricated on gold coated soda lime glasses, where the device based on NiO{sub x} has been found applicable for UV photo-conducting and LaNiO{sub 3-δ} has been recognized as a potential IR photo-conducting sensors. Their respective current amplifications have been recorded 8 and 2.2 times more than the dark current at 2 V of DC bias. The UV sensor has been explained by direct band gap semiconducting nature of NiO{sub x} and IR sensitivity of LaNiO{sub 3-δ} was explained in terms oxygen deficiency induced band gap opening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tracking rare-isotope beams with microchannel plates

A system of two microchannel-plate detectors has been successfully implemented for tracking projectile-fragmentation beams. The detectors provide interaction positions, angles, and arrival Limes of ions at the reaction target. Furthermore, the current design is an adaptation of an assembly used for low-energy beams (~1.4 MeV/nucleon). In order to improve resolution in tracking high-energy heavy-ion beams, the magnetic field strength between the secondary-electron accelerating foil and the microchannel plate had to be increased substantially. Results from an experiment using a 37-MeV/nucleon 56 Ni beam show that the tracking system can achieve sub-nanosecond timing resolution and a position resolution of ~1 mm for beam intensities up to 5 x 10 5 pps.

43 PARTICLE ACCELERATORS↗

Life-cycle greenhouse gas emissions analysis of battery-grade lithium production in Finland

Various countries are undertaking initiatives to domestically produce battery-related critical materials. Within Finland, Keliber Technology Oy is developing capabilities for battery-grade lithium hydroxide monohydrate (LHM) production from spodumene ores. A detailed life-cycle assessment (LCA) of this pathway is conducted to determine its life-cycle GHG impacts using Argonne's R&D GREET (Research and Development Greenhouse gases, Regulated Emissions, and Energy use in Technologies) model. The analysis shows life-cycle GHG emissions of similar to 9.2 kg CO 2-eq /kg LHM, dominated by contributions from three energy sources - diesel, natural gas, and electricity - and two material inputs - lime (CaO) and soda ash (Na 2 CO 3 ). Sensitivity analyses highlight the potential to reduce these impacts using low-carbon electricity, sequestration of process CO 2 emissions generated during CaO and Na 2 CO 3 production, and bio-based energy for LHM production (by similar to 15 % each). A comparative analysis shows lower impacts for Keliber's LHM than for existing LHM production from Australian spodumene ores processed in China (by similar to 40 %).

CCS↗

Enhanced electrical properties of pulsed laser-deposited CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films via processing control

Polycrystalline CuIn{sub 0.7}Ga{sub 0.3}Se{sub 2} thin films were prepared on soda-lime glass substrates using pulsed laser deposition (PLD) with various process parameters such as laser energy, repetition rate and substrate temperature. It was confirmed that there existed a limited laser energy, i.e. less than 300 mJ, to get phase pure CIGS thin films at room temperature. Particularly, even at room temperature, distinct crystalline CIGS phase was observed in the films. Crystallinity of the films improved with increasing substrate temperature as evidenced by the decrease of FWHM from 0.65 degto 0.54 deg. Slightly Cu-rich surface with Cu{sub 2-x}Se phase was confirmed to exist by Raman spectra, depending on substrate temperature. Improved electrical properties, i.e., carrier concentration of {proportional_to}10{sup 18} cm{sup -3} and resistivity of 10{sup -1}{omega} cm at higher substrate temperature for the optimal CIGS films are assumed to be induced by the potential contributions from highly crystallized thin films, existence of Cu{sub 2-x}Se phase and diffusion of Na from substrates to films. (author)

14 SOLAR ENERGY↗

Potential-induced degradation of Cu(In,Ga)Se 2 can occur by shunting the front i-ZnO and by damaging the p-n junction

In this work we test field-relevant potential-induced degradation (PID) behavior by encapsulating laboratory Cu(In,Ga)Se 2 (CIGS) solar cells and applying +1000 V uniformly on the face of the front glass. In this configuration, we find that K-rich borosilicate glass reduces the extent of PID relative to Na-rich soda-lime glass. We also find that the standard testing protocol of stressing cells at short-circuit leads to faster PID than stressing cells at open-circuit. We characterize two types of CIGS PID: The first, front shunting PID, is driven by front-glass stress and occurs when alkali metal cations accumulate in the i-ZnO buffer, where they increase shunt conductance to reduce fill factor. The second, p-n junction PID, results from back-glass stress as alkali metal cations pile up near the CIGS surface/CdS buffer, where they reduce charge carrier concentration, open-circuit voltage, and fill factor to degrade efficiency ~160 times faster than front shunting PID.

14 SOLAR ENERGY↗

Genetic algorithm prediction of crystal structure of metastable Si-IX phase

We performed genetic algorithm search for the atomic structure of the long Lime unsolved Si-IX phase. We found two new structures with space groups of P4(2)/m and P-4, respectively, which have lattice parameters in excellent agreement with the experimental data. The phonon calculations showed that the P4(2)/m structure exhibits a soft phonon mode, while the P-4 structure is dynamically stable. Our calculation also showed that the P-4 structure is a meta-stable structure in a pressure range from 0 to 40 GPa, The Si-IX phase could be a mixed phase consisting of the P4(2)/m and the P-4 structures. Published by Elsevier Ltd.

36 MATERIALS SCIENCE↗

Inversion-based correction of Double-Torsion (DT) subcritical crack growth tests for crack profile geometry

Because of its simplicity and the ability to produce a stable, slow-propagating crack, the Double-Torsion (DT) method has been used widely for investigating the critical and subcritical propagation of a slow-propagating tensile (mode-I) crack. However, to determine the complex relationship between the crack velocity $\mathcal{v_c}$ vs. the strain energy release rate $\mathscr{G}$ (or the stress intensity factor K) from laboratory measurements, several corrections must be made to account for the impact of sample and crack geometry. Particularly, DT test typically produces a crack with a curved edge profile instead of a straight line, causing the local $\mathcal{v_c}$ and $\mathscr{G}$ vary along the crack front. The experimentally measured $\mathcal{v_c}$ and $\mathscr{G}$ data merely reflect collective, averaged behavior of the crack. This makes inversion for the intrinsic, “true” crack growth kinetics necessary, based upon the knowledge of the crack geometry. Simple and effective correction methods have been proposed and validated for the slow, chemical-reaction-controlled part (Region I) of the $\mathcal{v_c}$-$\mathscr{G}$ curve. However, reliable methods for the highly nonlinear, transport-dominated part (Region II) and its sudden transition to the dynamic propagation part (Region III) are still lacking. Here we propose a method for determining the intrinsic $\mathcal{v_c}$-$\mathscr{G}$ relationship across all three Regions based upon DT test data, using a simple model function and its numerical inversion. The performance of this approach is examined and demonstrated using both synthetic and laboratory data for subcritical crack growth in soda lime glass.

42 ENGINEERING↗

Buffer/absorber interface recombination reduction and improvement of back-contact barrier height in CdTe solar cells

Electronic properties of a CdTe solar cell are reported using temperature-dependent capacitance spectroscopy and current-voltage characteristics, the latter in dark and illuminated conditions. The baseline solar cell material stack investigated is comprised of soda-lime-glass/SnO 2 :F/SnO 2 /CdS:O-buffer/CdTe-absorber/Cu/Au. Properties are compared with CdTe solar cells in which the back surface was hydroiodic acid etched, before the back-contact formation, and a CdTe device in which Mg-doped ZnO (MZO) replaces buffer layer CdS. Reduced back-contact barrier height and grain boundary barrier height are observed in the HI treated CdTe cell. As a result, improved device performance in the MZO-based CdTe device is attributed to reduced emitter/absorber interface recombination when using the MZO window layer.

14 SOLAR ENERGY↗

PbI 2 Nanocrystal Growth by Atomic Layer Deposition from Pb(tmhd) 2 and HI

Atomic layer deposition (ALD) allows for fine control over the thickness, stoichiometry, and structural defects of materials. ALD provides a suitable route to deposit lead halides, which can further be converted to perovskites for photovoltaics, photoemission, and photodetection, among other applications. Deposition of lead halides by ALD has already begun to be explored; however, the precursors used in published processes are highly hazardous, require expensive fabrication processes, or contain impurities that can jeopardize the optoelectronic properties of metal halide perovskites after conversion. In this work, we deposited lead iodide (PbI 2 ) by a facile ALD process involving only two readily accessible and low-cost precursors. PbI 2 nanocrystals were grown on soda-lime glass (SLG), silicon dioxide support grids, and silicon wafer substrates and provided the groundwork for further investigation into developing lead halide perovskite processes by ALD. Further, the ALD-grown PbI 2 was characterized by annular dark-field scanning transmission electron microscopy (ADF-STEM), atomic force microscopy (AFM), high resolution transmission electron microscopy (HRTEM), X-ray fluorescence (XRF), and X-ray photoemission spectroscopy (XPS), among other methods. This work presents the first step to synthesize lead halide perovskites with atomic control for applications such as interfacial layers in photovoltaics and for deposition in microcavities for lasing.

36 MATERIALS SCIENCE↗

Reassessing the Progress in the Production of Advanced Biofuels in the Current Competitive Environment and Beyond: What Are the Successes and Where Progress Eludes Us and Why

The concept, science, and technology of biofuels has captured the public’s imagination as well as the attention of the academic and industrial R&D communities over the last 10 years. The 2006 US DOE report has been the basis for funding three US Bioenergy Centers, and has precipitated increased research funding worldwide. Despite the large funding resources, there is little evidence to support that processes for advanced biofuels (i.e., fuel molecules more dense than ethanol) are anywhere near achieving economic feasibility. In assessing the current status of the field for biology-based processes, there has been tremendous progress in metabolic and pathway engineering and the development of synthetic-biology tools that can be applied to engineer strains. Furthermore, the economic feasibility of what is currently possible remains in doubt, especially in light of the recent low prices of oil and natural gas. Issues liming the economic feasibility are assessed and strategies to take advantage of the successful achievements are suggested. Analysis suggests that for biofuel molecules larger than four carbons, purely biological processes cannot be currently justified, but hybrid biological/catalytic technologies may offer the necessary economies to produce such biofuels.

09 BIOMASS FUELS↗

Probing Hydrogen-Bonding Interactions of Water Molecules Adsorbed on Silica, Sodium Calcium Silicate, and Calcium Aluminosilicate Glasses

Vibrational sum frequency generation (SFG) spectroscopy was used to study how hydrogen bonding interactions of physisorbed water layers vary with the glass composition and surface condition. Three different glass materials were used: amorphous silica (fused quartz), sodium calcium silicate (also called soda lime silica), and calcium aluminosilicate (boron-/fluorine-free E-glass). Two different surface conditions were compared: (i) a mechanically polished, fire-polished, and then annealed surface and (ii) an acid-leached surface (pH 1, 90 °C, 24 h). Compositional and structural information obtained by X-ray photoelectron spectroscopy, spectroscopic ellipsometry, and attenuated total reflection infrared spectroscopy were correlated with SFG spectral features. The temperature dependence of SFG spectral features revealed that regardless of the glass composition, the glass surface is free of physisorbed water at 250 °C, and during cooling in ambient air, it starts absorbing water at a temperature corresponding to a relative humidity of 1–2%. Humidity-controlled SFG measurements at room temperature showed that the hydrogen bonding interactions of water physisorbed on the glass surface cleaned with UV/O 3 are quite different depending on the glass composition and surface preparation history. This finding will be useful in understanding how surface properties of different glasses are altered by humidity in ambient air.

36 MATERIALS SCIENCE↗

Semi-monolithic Integration of All-Chalcopyrite Multijunction Solar Conversion Devices via Thin-Film Bonding and Exfoliation

Here we report on a semi-monolithic integration method to circumvent processing incompatibility between materials of dissimilar classes and combine them into multijunction devices for photovoltaic and photoelectrochemical applications. Proof-of-concept all-chalcopyrite tandems were obtained by consecutive transfer of fully integrated unpatterned 1.85 eV CuGa 3 Se 5 and 1.13 eV CuInGaSe 2 PV stacks from their Mo/soda lime glass substrates onto a new single host substrate. This transfer approach consists of two key steps: (1) bonding of the solar stack (face down) onto a handle (e.g., SnO 2 :F, FTO) using a transparent conductive composite and (2) delamination of the solar stack at the chalcopyrite/Mo interface by employing a wedge-based exfoliation technique. Upon transfer onto FTO, a CuGa 3 Se 5 champion device demonstrated near-coincident photocurrent density-voltage characteristic with a baseline measurement. Then, the exfoliated CuGa 3 Se 5 single-junction stack transferred onto FTO served as the new host onto which a second fully processed CuInGaSe 2 stack was bonded (face down) onto and liberated from its Mo/SLG substrate, leading to a complete transfer of both sub-cells onto one FTO substrate. A champion semi-monolithic tandem device exhibited a power conversion efficiency of 5.04% with an open-circuit voltage, a short-circuit current density, and a fill factor of 1.24 V, 7.19 mA/cm 2 , and 56.7%, respectively. This first-time demonstration of a fully operational semi-monolithic device provides a new avenue to combine thermally, mechanically, and/or chemically incompatible thin-film material classes into tandem photovoltaic and photoelectrochemical devices while maintaining state-of-the-art sub-cell processing.

14 SOLAR ENERGY↗

Optimization of Desalination Systems with Detailed Water Chemistry through Integration of Reaktoro in WaterTAP

Chemistry predictions are critical for an accurate estimation of performance and costs in desalination process models, which allows for the estimation of the value of new technologies and the viability of treating new water sources. Herein, we present how an implicit function formulation can be used to integrate the chemical modeling package, Reaktoro, into the techno-economic assessment and modeling platform, WaterTAP. This approach resolves the critical issues of integrating large-scale thermodynamic models and databases into equation-oriented process models while allowing more flexibility relative to previously presented surrogate-based methods. We describe how this integration into Pyomo and WaterTAP models is implemented and used through the open-source package Reaktoro-PSE . We first validate this integration approach by performing optimization on a previously presented desalination treatment train with softening and acid addition as the pretreatment steps. Then, to demonstrate the value of this approach, we extend the cost-optimization problem to include the simultaneous addition of lime and soda ash for softening, and HCl and H 2 SO 4 in the acidification steps. Finally, we were able to confirm the previously established results that were obtained by using surrogate models and demonstrate that the implicit function approach enables exploration of different feedwater compositions and a larger number of chemicals and their combinations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Physicochemical characterizations and desulfurization properties in coal combustion of three calcium and sodium industrial wastes

To recycle industrial wastes and reduce SO{sub 2} pollutant emission in coal combustion, the mineralogical compositions, porosity structures, surface morphologies, and desulfurization properties of three calcium and sodium industrial wastes were investigated via X-ray diffraction (XRD), porosimeter, scanning electron microscopy (SEM), and a fixed-bed reactor. (1) White lime mud (WLM) mainly composed of CaCO{sub 3} with Na{sub 2}O and K{sub 2}O impurities has smaller CaCO{sub 3} particles and a higher surface area than limestone. But calcined WLM has larger CaO particles and a lower surface area than limestone calcined at 1200{sup o}C for 300 s. (2) Calcium carbide residue (CCR) mainly composed of Ca(OH)2, has the highest surface area and smaller Ca(OH){sub 2} particles than the CaCO{sub 3} particles in WLM. Its surface area monotonously and dramatically decreases at 1200{sup o}C for 300 s, but the sintered CaO particles are still smaller than those in the limestone. (3) When brine sludge (BS), mainly composed of NaCl and CaCO{sub 3}, is heated at 1200{sup o}C for 300 s, the NaCl/CaO eutectic solvent facilitates the aggregation of some complex composites to form many larger particles. (4) WLM gives the highest desulfurization efficiency of 80.4% at 1000{sup o}C and 65.0% at 1100{sup o}C in coal combustion. Combined CCR and limestone give a synergistic desulfurization efficiency of 45.8% at 1200{sup o}C. BS with a molar ratio of Na/Ca at 1:15 effectively promotes the synergistic desulfurization efficiency of combined CCR and limestone to a peak of 54.9% at 1200{sup o}C. 23 refs., 10 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Screening of binders for pelletization of CaO-based sorbents for CO{sub 2} capture

CaO-based CO{sub 2} looping cycle technology is a promising method for separation of CO{sub 2} from flue gas and syngas at high temperatures. The process of CO{sub 2} capture is expected to take place in fluidized-bed combustion (FBC) systems, which implies significant attrition and elutriation of the solid sorbent. Hence, both reactivation of spent sorbent and preparation of modified CaO-based sorbent may be required to maximize the performance of the sorbent. We present initial results on the screening of suitable binders for pelletization. Two types of bentonite (Na- and Ca-bentonite) and four types of commercial calcium aluminate cements (CA-14, CA-25, Secar 51, and Secar 80) were investigated here, with a primary focus of maintaining a high CO{sub 2}-capture capacity over 30-35 cycles. The tests were carried out using a thermogravimetric analyzer (TGA), and the results showed that the presence of bentonites led to faster decay in activity as a result of the formation of calcium-silica compounds with low melting points, which leads to enhanced sintering. This is confirmed by scanning electron microscopy (SEM) and also X-ray diffraction (XRD), which showed the presence of spurrite (Ca{sub 5}(SiO{sub 4}){sub 2}CO{sub 3}) as the dominant compound in the pellet after this series of cycles. Better results were obtained with no binder, i.e., by hydration of lime, where Ca(OH){sub 2} plays the role of the binder. Promising results were obtained also with calcium aluminate cements, where no effect of sintering because of the presence of these binders was noticed. Thus, on the basis of this study, the use of calcium aluminate cements for pelletization of CaO-based sorbent is recommended. 39 refs., 9 figs., 2 tabs.

01 COAL, LIGNITE, AND PEAT↗

Development of a countercurrent multistage fluidized-bed reactor and mathematical modeling for prediction of removal efficiency of sulfur dioxide from flue gases

A bubbling countercurrent multistage fluidized-bed reactor for the sorption of sulfur dioxide by hydrated lime particles was simulated employing a two-phase model, with the bubble phase assumed to be in plug flow and with the emulsion phase either in plug flow (EGPF model) or in perfectly mixed flow (EGPM model). The model calculations were compared with experimental data in term of percentage removal efficiency of sulfur dioxide. Both models were applied to understand the influence of operating parameters on the reactor performance. The comparison showed that the EGPF model agreed well with the experimental data. From the perspective of use of a multistage fluidized-bed reactor as air pollution control equipment in industry, the model could be considered general enough for predicting the performance of reactors for gas-solid treatment.

01 COAL, LIGNITE, AND PEAT↗