Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “K”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Chemistry of Apollo 11 low-K mare basalts

A reexamination of the bulk major and trace element geochemistry of Apollo 11 low-K mare basalts is presented. New analyses are given for seven previously unanalyzed samples (10003, 10020, 10044, 10047, 10050, 10058, and 10062) and for two low-K basalts (10029 and 10092) and one high-K basalt (10071) for which comprehensive compositional data were previously lacking. The data show that three distinct magma types have been sampled, as proposed by Beaty and Albee (1978), and that these magma types are unrelated by near-surface crystal fractionation. Each magma type is characterized by distinctive magmaphile element ratios, which enable previously unclassified samples (10050 and 10062) to be assigned to an appropriate magma type.

Rhodes, J. M.↗

Solar plages and the interpretation of stellar Ca 2 H and K line variations in late type dwarfs

Approximately a dozen late type dwarf stars have been observed by Wilson (1978) to undergo cyclic variability in Ca II H and K line emission which seems analogous to the solar activity cycle. What might be learned about these stars from solar analogies? The Ca II K index is estimated variation of the Sun viewed as a star, and compared with the observed range of Wilson's stellar observations. Results indicate trends of increasing relative variation H-K(max)/H-K(min) with later spectral type, due to decreasing dilutional contribution of residual photospheric flux to a 1 A band at line center, and of increasing relative variation with decreasing relative time of rise to maximum tau rise/tau reminiscent of the observed solar correlation of a quick rise to sunspot maximum with a strong cycle.

Cook, J. W.↗

A 10 deg K triple-expansion Stirling-cycle cryocooler

The design of a triple expansion closed cycle Stirling cryocooler optimized for a cooling load of 50 mW at 10 K is described. The cooler was designed with the objectives of low power, low weight, compactness, low mechanical motion, low electromagnetic noise, and low output temperature fluctuations. The design employs a direct drive linear motion piston motor and a triple expansion free displacer. Piston motion is controlled by feedback from an optical position transducer. Mechanical vibrations are attenuated with a passive resonant counterbalance. Electromagnetic noise is attenuated with layered high permeability magnetic shielding. The regenerators move with the displacer within a thin titanium cold finger. The piston and displacer oscillate at 8.33 Hz on bearings and seals of reinforced Teflon. The cooler is designed to provide the desired 50 mW of cooling at 10 K with a power input of less than 100 W. The piston can be driven at a greater stroke to produce up to 200 mW of cooling with an input power of 250 W. A lead and copper cold tip heat exchanger will limit temperature fluctuations to within 0.01 K.

Newman, W.↗

Cellular localization of Na(+), K(+)-ATPase in the mammalian vestibular system

Two different, but complementary, procedures for cellular localization of Na+, K+-ATPase in the guinea pig vestibular system were employed. One of these techniques, devised by Stirling, depends upon the well documented ability of the specific inhibitor ouabain to bind selectively to Na+,K+-ATPase, blocking catalytic activity. Microdisected vestibular tissues are incubated with tritium-labelled (3H-) ouabain, and regions with a high concentration of Na+,K+-ATPase are subsequently identified by light microscope autoradiography. A second method, originated by Ernst, detects inorganic phosphate released from an artificial substrate (nitrophenyl phosphate) by catalytic activity of the enzyme. In the presence of strontium ion, phosphate is precipitated near regions of high activity, then converted to a product which may finally be visualized in the electron microscope. This cytochemical enzymatic reaction is inhibited by ouabain.

Kerr, T. P.↗

Fiberglass epoxy laminate fatigue properties at 300 and 20 K

A subcritical liquid hydrogen orbital storage and supply experiment is being designed for flight in the Space Shuttle cargo bay. The Cryogenic Fluid Management Experiment (CFME) includes a liquid hydrogen tank supported in a vacuum jacket by two fiberglass epoxy composite trunnion mounts. The ability of the CFME to last for the required seven missions depends primarily on the fatigue life of the composite trunnions at cryogenic temperatures. To verify the trunnion design and test the performance of the composite material, fatigue property data at 300 and 20 K were obtained for the specific E-glass fabric/S-glass unidirectional laminate that will be used for the CFME trunnions. The fatigue life of this laminate was greater at 20 K than at 300 K, and was satisfactory for the intended application.

Toth, J. M., Jr.↗

Vuilleumier cycle cryocooler operating below 8 K

This paper describes the design and development of a Vuilleumier cycle cryocooler (VM cooler) operating below 8 K, for the application of small superconducting devices. Liquid nitrogen has been used as a heat sink of the hot displacer. The annular gap between the phenolic displacer and SUS 304 stainless cylinder has been used as a gap regenerator. In order to obtain the cooling temperature below 3 K, we designed a single stage VM cooler which is precooled to 10 K by another two stage VM cooler. The effect of the mean operating pressure, cycle speed and phase difference between the hot and cold displacer of each VM cooler will be also discussed, including the experimental results.

Matsubara, Y.↗

Partitioning of K, U, and Th between sulfide and silicate liquids - Implications for radioactive heating of planetary cores

Experimental partitioning studies are reported of K, U, and Th between silicate and FeFeS liquids designed to test the proposal that actinide partitioning into sulfide liquids is more important then K partitioning in the radioactive heating of planetary cores. For a basaltic liquid at 1450 C and 1.5 GPa, U partitioning into FeFeS liquids is five times greater than K partitioning. A typical value for the liquid partition coefficient for U from a granitic silicate liquid at one atmosphere at 1150 C and low fO2 is about 0.02; the coefficient for Th is similar. At low fO2 and higher temperature, experiments with basaltic liquids produce strong Ca and U partitioning into the sulfide liquid with U coefficient greater than one. The Th coefficient is less strongly affected.

Murrell, M. T.↗

The 1- to 4-K refrigeration techniques for cooling masers on a beam waveguide antenna

The status of technology is reported for various 1- to 4-K commercially available refrigeration systems capable of producing 1.5-K refrigeration to cool masers and superconducting cavity oscillators on the proposed beam waveguide antenna. The design requirements for the refrigeration system and the cryostat are presented. A continuously operating evaporation refrigerator that uses capillary tubing to provide a continuous, self-regulating flow of helium at approximately 1.5 K has been selected as the first refrigerator design for the beam waveguide antenna.

Johnson, D. L.↗

Rate constant for the reaction of O(3P) with diacetylene from 210 to 423 K

The absolute rate constant for the reaction of O(3P) with diacetylene (C4H2) has been measured as a function of pressure and temperature by the flash-photolysis/resonance-fluorescence method. At 298 K and below, no pressure dependence of the rate constant was observed, but at 423 K a moderate (factor-of-2) increase was detected in the range 3 to 75 torr Ar.Results at or near the high-pressure limit are represented by an Arrhenius expression over the temperature range 210 to 423 K. The results are compared with previous determinations, all of which employed the discharge-flow/mass-spectrometry technique. The mechanism of the reaction is considered, including both primary and secondary processes. The heats of formation of the reactants, adducts, and products for the O(3P) + C4H2 reaction are discussed and contrasted with those for O(3P) + C2H2.

Mitchell, M. B.↗

Noise parameters and light sensitivity of low-noise high-electron-mobility transistors at 300 and 12.5 K

The four noise parameters of cryogenically cooled HEMTs have been investigated. Two different HEMT structures, with and without a spacer layer, were tested. The noise parameters of both structures were similar at room temperature, while they were dramatically different at cryogenic temperatures. The minimum noise temperatures measured at 8.4 GHz were 75 + or 5 K at room temperature and 8.5 + or - 1.5 K at the temperature of 12.5 K. The cryogenic performance is the best ever observed for field-effect transistors.

Pospieszalski, Marian W.↗

Geochronology of high-K aluminous mare basalt clasts from Apollo 14 breccia 14304

Two aluminous mare basalt clasts of high K abundances from Apollo 14 breccia 14304 (the 14304,127 and 14304,128 samples) were characterized with respect to the Rb and Sr concentrations and isotopic compositions, and the Rb-Sr, K-Ar, and Sm-Nd isotopic age determinations were carried out. The results suggest that these high-K basalts were melts derived from mantle material and that they have experienced about ten-fold Rb/Sr and K/La enrichments at approximately the time of crystallization.

Shih, C.-Y.↗

Explosive volcanism, shock metamorphism and the K-T boundary

The issue of whether shocked quartz can be produced by explosive volcanic events is important in understanding the origin of the K-T boundary constituents. Proponents of a volcanic origin for the shocked quartz at the K-T boundary cite the suggestion of Rice, that peak overpressures of 1000 kbars can be generated during explosive volcanic eruptions, and may have occurred during the May, 1980 eruption of Mt. St. Helens. Attention was previously drawn to the fact that peak overpressures during explosive eruptions are limited by the strength of the rock confining the magma chamber to less than 8 kbars even under ideal conditions. The proposed volcanic mechanisms for generating pressures sufficient to shock quartz are further examined. Theoretical arguments, field evidence and petrographic data are presented showing that explosive volcanic eruptions cannot generate shock metamorphic features of the kind seen in minerals at the K-T boundary.

Desilva, S. L.↗

The Manson impact structure, a possible site for a Cretaceous-Tertiary (K-T) boundary impact

The Manson impact structure, about 35 km in diameter, is the largest impact crater recognized in the United States. Its center is located near the town of Manson, 29 km west of Fort Dodge, Iowa. The structure is not well known geologically because it is covered by tens of meters of glacial deposits. What is known about the structure was learned mostly from the study of water well cuttings. At Manson the normal Phanerozoic and Proterozoic sedimentary rocks were replaced by centrally uplifted Proterozoic crystalline rocks that are representative of the normal basement: This central uplift is surrounded by completely disrupted rocks which are roughly encircled by peripherally faulted and slumped sequences of normal sedimentary strata. Radially outward normal sedimentary strata are uplifted slightly. Manson, once interpreted as a cryptovolcanic structure, is now considered an impact structure based on its circular shape, its central uplift and the presence of multiple intersecting sets of shock lamellae in quartz grains from the central uplift. The Ar-40/Ar-39 age spectrum dating results for a microcline separate from the Manson 2-A core in the central uplift is shown. This spectrum is interpreted to indicate a nearly complete degassing of the microcline at the time of the Manson impact. The remainder of the gas released climbs in age with increasing temperature of release. This pattern of the age spectrum is interpreted to represent diffusional loss due to reheating at the time of the impact and during subsequent cooling. Shocked quartz grains, present in the iridium-bearing layer at the K-T boundary throughout the world, have a significantly larger size and are more abundant in the western interior of North America than elsewhere in the world. Furthermore, shocked feldspar and granitic fragments are found at the K-T boundary in North America. These observations indicate the K-T boundary impact must have penetrated continental crust in North America.

Hartung, J. B.↗

Bio-, Magneto- and event-stratigraphy across the K-T boundary

Determining the time and the time structure of rare events in geology can be accomplished by applying three different and independent stratigraphic methods: Biostratigraphy, magneto-stratigraphy and event-stratigraphy. The optimal time resolution of the two former methods is about 1000 years, while by means of event-stratigraphy a resolution of approximately one year can be achieved. For biostratigraphy across the Cretaceous-Tertiary (K-T) boundary micro- and nannofossils have been found best suited. The qualitative and quantitative analyses of minerals and trace elements across the K-T boundary show anomalies on a millimeter scale and permit conclusions regarding the time structure of the K-T event itself. The results of the analyses find a most consistent explanation by the assumption of an extraterrestrial impact. The main portion of the material rain from the atmosphere evidently was deposited within a short time. The long-time components consist of the finest portion of the material rain from the atmosphere and the transported and redeposited fall-out.

Preisinger, A.↗

Climatic changes resulting from mass extinctions at the K-T boundary (and other bio-events)

The mass extinctions at the Cretaceous-Tertiary (K-T) boundary include about 90 percent of marine calcareous nannoplankton (coccoliths), and carbon-isotope data show that marine primary productivity was drastically reduced for about 500,000 years after the boundary event, the so-called Strangelove Ocean effect. One result of the elimination of most marine phytoplankton would have been a severe reduction in production of dimethyl sulfide (DMS), a biogenic gas that is believed to be the major precursor of cloud condensation nuclei (CCN) over the oceans. A drastic reduction in marine CCN should lead to a cloud canopy with significantly lower reflectivity, and hence cause a significant warming at the earth's surface. Calculations suggest that, all other things being held constant, a reduction in CCN of more than 80 percent (a reasonable value for the K-T extinctions) could have produced a rapid global warming of 6 C or more. Oxygen-isotope analyses of marine sediments, and other kinds of paleoclimatic data, have provided for a marked warming, and a general instability of climate coincident with the killoff of marine plankton at the K-T boundary. Similar reductions in phytoplankton abundance at other boundaries, as indicated by marked shifts in carbon-isotope curves, suggest that severe temperature changes may have accompanied other mass extinctions, and raises the intriguing possibility that the extinction events themselves could have contributed to the climatic instabilities at critical bio-events in the geologic record.

Rampino, Michael R.↗

A regional perspective on the palynofloral response to K-T boundary event(s) with emphasis on variations imposed by the effects of sedimentary facies and latitude

Palynological studies deal with fossil reproductive bodies that were produced by fully functioning plants, whereas most faunal studies are based on death assemblages. Therefore, changes in pollen and spore assemblages cannot be used directly as evidence of catastrophic mass killings but only to indicate changes in ecological conditions. The impact of the Cretaceous-Tertiary boundary event on terrestrial plant communities is illustrated by the degree, rate and selectivity of change. As in most classical palynological studies, the degree of change is expressed in terms of relative abundance and changes in species diversity. It is recognized that sampling interval and continuity of the rock record within individual sections can affect the percieved rate of change. Even taking these factors into account, a gradual change in relative abundance and multiple levels of apparent extinctions, associated with the interval bounding the K-T boundary, can be demonstrated. Climatic change, which locally exceeds the tolerance of individual species, and the possible loss of a group of pollinating agents are examined as possible explanations for the selectivity of apparent extinctions and/or locally truncated occurrences. The aspects of change are demonstrated with data from four different K-T boundary localities in Western Canada between paleolatitudes 60 and 75 deg north. Together, the four localities discussed allow changes imposed by latitude and differences in the depositional environment be isolated from the boundary event itself which is reflected by the truncated ranges of several species throughout the region of study. What must be recognized is that variations in the response of vegetation to the K-T boundary event(s) occurred throughout the Western Interior basin.

Sweet, A. R.↗

The correlated-k method for radiation calculations in nonhomogeneous atmospheres

The accuracy of the correlated-k method, which is a technique for radiation calculations with spectrally averaged data in nonhomogeneous atmospheres, is investigated. Comparisons are made for scattering and absorbing atmospheres containing CO2, H2O, and O3, and it is concluded that: (1) the errors in correlated-k are generally of order of magnitude 1 percent, (2) much larger errors occur only when a radiative quantity is very much smaller than its average value, (3) errors do not depend systematically on the gas molecule, the distributions of gases and aerosols, or on the aerosol optical properties, and (4) errors do not systematically increase with the order of differencing. It is shown that the multiplication property for transmission by overlapping bands can be incorporated into correlated-k, that temperature effects can be interpolated on a coarse grid, and that 10 quadrature points are often sufficient to average over complex spectral intervals containing thousands of lines.

Goody, Richard↗

Tensile properties of HA 230 and HA 188 after 400 and 2500 hour exposures to LiF-22CaF2 and vacuum at 1093 K

The solid-to-liquid phase transformation of the nominal LiF-20CaF2 eutectic at 1043 K is considered to be an ideal candidate thermal energy storage mechanism for a space based low temperature Brayton cycle solar dynamic system. Although Co, Fe, and Ni superalloys are thought to be suitable containment materials for LiF based salts, long term containment is of concern because molten fluorides are usually corrosive and Cr can be lost into space through evaporation. Two examples of commercially available superalloys in sheet form, the Ni-base material HA 230 and the Co-base material Ha 88, have been exposed to molten LiF-22CaF2, its vapor, and vacuum, at 1093 K, for 400 and 2500 hr. Triplicate tensile testing of specimens subjected to all three environments have been undertaken between 77 to 1200 K. Comparison of the weight gain data, microstructure, and tensile properties indicate that little, if any, difference in behavior can be ascribed to the exposure environment.

Whittenberger, J. Daniel↗