Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isomerism”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Impact of Alkali and Alkali‐Earth Cations on Ni‐Catalyzed Dimerization of Butene

Abstract The presence of alkali (Na + or Li + ) or alkali‐earth (Ca 2+ or Mg 2+ ) cations adjusting the acid‐base properties on amorphous silica‐alumina influences markedly the catalytic properties of supported Ni for 1‐butene dimerization. The low concentration of Brønsted acid sites on these catalysts reduces the double bond isomerization of butene and inhibits the formation of dimethylhexene as primary product. While the alkali and alkali‐earth cations act as weak Lewis acid sites, only Ni 2+ sites are catalytically active for dimerization of 1‐butene. n ‐Octene and methylheptene are formed selectively as primary products; dimethylhexene is a secondary product. The open environment of the Ni 2+ sites does not induce different reaction pathways compared to Ni 2+ in the pores of zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Fluxionality of Subnano Clusters Reshapes the Activity Volcano of Electrocatalysis

The Sabatier activity volcano provides intuitive guide for catalyst design, but also imposes fundamental limitations on the composition and maximal activity of catalysts. Here we show that the ORR activity volcano is shifted and reshaped by the potential-dependent fluxionality of subnano cluster catalysts. Fluxionality causes the typically under-binding Ag/Au to gain optimal activity in the cluster form, and surpass Pt/Pd. Furthermore, isomerization of clusters as a function of the potential breaks linear scaling relationships, enabling surpassing the volcano “apex” relative to the bulk. The effect is likely general for fluxional cluster catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Reversible Photoswitching in Poly(2-oxazoline) Nanoreactors

This contribution reports light responsive catalytic nanoreactors based on poly(2-oxazoline) diblock copolymers. The hydrophobic block of the copolymer is a random copolymer consisting of a spiropyran functionalized 2-oxazoline (SPOx) and 2-(but-3-yn-1-yl)-4,5-dihydrooxazole (ButynOx), while the hydrophilic block is based on 2-methyl-2-oxazoline (MeOx). The block copolymer is terminated with tris(2-aminoethyl) amine (TREN) that serves as catalyst in a Knoevenagel condensation. Four block copolymers with different ButynOx/SPOx and hydrophilic/hydrophobic ratios are synthesized and self-assembled through solvent exchange. Micelles and vesicles of various sizes are observed by TEM, which undergo morphological and size changes in response to irradiation with UV light. We hypothesize that these transformations in the nanostructures are caused by increases in the hydrophilicity of the hydrophobic block when spiropyran (SP) isomerizes to merocyanine (MC) in the presence of UV light. The reversible transition from micellar to vesicular nanoreactors resulted in increased reaction kinetics through improved substrate accessibility to the catalytic site, or termination of the catalytic reaction due to polymer precipitation. Furthermore, these nanoreactors present a promising platform towards photoregulating reaction outcomes based on changes in nanostructure morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Symmetry Effects in Photoinduced Electron Transfer in Chlorin-Quinone Dyads: Adiabatic Suppression in the Marcus Inverted Region

In donor–acceptor dyads undergoing photoinduced electron transfer (PET), a direction or pathway for electron movement is usually dictated by the redox properties and the separation distance between the donor and acceptor subunits, while the effect of symmetry is less recognized. We have designed and synthesized two isomeric donor–acceptor assemblies in which electronic coupling between donor and acceptor is altered by the orbital symmetry control with the reorganization energy and charge transfer exothermicity being kept unchanged. Analysis of the optical absorption and luminescence spectra, supported by the DFT and TD-DFT calculations, showed that PET in these assemblies corresponds to the Marcus inverted region (MIR) and has larger rate for isomer with weaker electronic coupling. This surprising observation provides the first experimental evidence for theoretically predicted adiabatic suppression of PET in MIR, which unambiguously controlled solely by symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

E ‐selective Semi‐hydrogenation of Alkynes under Mild Conditions by a Diruthenium Hydride Complex

Abstract The synthesis, characterization and catalytic activity of a new class of diruthenium hydrido carbonyl complexes bound to the t Bu PNNP expanded pincer ligand is described. Reacting t Bu PNNP with two equiv of RuHCl(PPh 3 ) 3 (CO) at 140 °C produces an insoluble air‐stable complex, which was structurally characterized as [Ru 2 ( t Bu PNNP)H(μ‐H)Cl(μ‐Cl)(CO) 2 ] ( 1 ) using solid‐state NMR, IR and X‐ray absorption spectroscopies and follow‐up reactivity. A reaction with KO t Bu results in deprotonation of a methylene linker to produce [Ru 2 ( t Bu PNNP * )H(μ‐H)(μ‐O t Bu)(CO) 2 ] ( 3 ) featuring a partially dearomatized naphthyridine core. This enables metal‐ligand cooperative activation of H 2 analogous to the mononuclear analogue, [Ru( t Bu PNP*)H(CO)]. In contrast to the mononuclear system, the bimetallic analogue 3 catalyzes the E ‐selective semi‐hydrogenation of alkynes at ambient temperature and atmospheric H 2 pressure with good functional group tolerance. Monitoring the semi‐hydrogenation of diphenylacetylene by 1 H NMR spectroscopy shows the intermediacy of Z ‐stilbene, which is subsequently isomerized to the E ‐isomer. Initial findings into the mode of action of this system are provided, including the spectroscopic characterization of a polyhydride intermediate and the isolation of a deactivated species with a partially hydrogenated naphthyridine backbone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Rational Control of Off‐State Heterogeneity in a Photoswitchable Fluorescent Protein Provides Switching Contrast Enhancement**

Abstract Reversibly photoswitchable fluorescent proteins are essential markers for advanced biological imaging, and optimization of their photophysical properties underlies improved performance and novel applications. Here we establish a link between photoswitching contrast, one of the key parameters that dictate the achievable resolution in nanoscopy applications, and chromophore conformation in the non‐fluorescent state of rsEGFP2, a widely employed label in REversible Saturable OpticaL Fluorescence Transitions (RESOLFT) microscopy. Upon illumination, the cis chromophore of rsEGFP2 isomerizes to two distinct off ‐state conformations, trans1 and trans2 , located on either side of the V151 side chain. Reducing or enlarging the side chain at this position (V151A and V151L variants) leads to single off ‐state conformations that exhibit higher and lower switching contrast, respectively, compared to the rsEGFP2 parent. The combination of structural information obtained by serial femtosecond crystallography with high‐level quantum chemical calculations and with spectroscopic and photophysical data determined in vitro suggests that the changes in switching contrast arise from blue‐ and red‐shifts of the absorption bands associated to trans1 and trans2 , respectively. Thus, due to elimination of trans2 , the V151A variants of rsEGFP2 and its superfolding variant rsFolder2 display a more than two‐fold higher switching contrast than their respective parent proteins, both in vitro and in E. coli cells. The application of the rsFolder2‐V151A variant is demonstrated in RESOLFT nanoscopy. Our study rationalizes the connection between structural and photophysical chromophore properties and suggests a means to rationally improve fluorescent proteins for nanoscopy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Gas–Phase Preparation of the 14π Hückel Polycyclic Aromatic Anthracene and Phenanthrene Isomers (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) Mechanism

Polycyclic aromatic hydrocarbons (PAHs) imply the missing link between resonantly stabilized free radicals and carbonaceous nanoparticles, commonly referred to as soot particles in combustion systems and interstellar grains in deep space. Whereas gas phase formation pathways to the simplest PAH – naphthalene (C 10 H 8 ) – are beginning to emerge, reaction pathways leading to the synthesis of the 14π Hückel aromatic PAHs anthracene and phenanthrene (C 14 H 10 ) are still incomplete. Here, by utilizing a chemical microreactor in conjunction with vacuum ultraviolet (VUV) photoionization (PI) of the products followed by detection of the ions in a reflectron time-of-flight mass spectrometer (ReTOF-MS), the reaction between the 1'- and 2'-methylnaphthyl radicals (C 11 H 9 •) with the propargyl radical (C 3 H 3 •) accesses anthracene (C 14 H 10 ) and phenanthrene (C 14 H 10 ) via the Propargyl Addition–BenzAnnulation (PABA) mechanism in conjunction with a hydrogen assisted isomerization. Furthermore, the preferential formation of the thermodynamically less stable anthracene isomer compared to phenanthrene suggests a kinetic, rather than a thermodynamics control of the reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Sn doping on partially dealuminated Beta zeolite by solid state ion exchange for 5‐hydroxymethylfurfural ( 5‐HMF ) production from glucose

Abstract BACKGROUND The conversion of glucose into 5‐hydroxymethylfurfural (5‐HMF) involves the isomerization of glucose to fructose catalyzed by Lewis acid and subsequent dehydration of fructose catalyzed by Brönsted acid. In this work, in order to obtain a high yield of 5‐HMF, a series of Sn‐Al‐Beta catalysts containing both Lewis and Brönsted acid sites were prepared by a convenient solid state ion exchange (SSIE) method using partially dealuminated Beta zeolite and tin(II) acetate. RESULTS The obtained bifunctional catalysts were investigated for one‐pot production of 5‐HMF from glucose in the ionic liquid (IL) [C 4 mim]Cl. Among various catalysts, Sn‐Al‐Beta‐ 4 ‐ 8 exhibited the best catalytic performance, giving a 5‐HMF yield of 54% under optimal reaction conditions (393 K, 2 h), along with a glucose conversion of 81%. The Sn‐Al‐Beta‐ 4‐8 catalyst and IL were regenerated by the extraction of 5‐HMF, and the reactivity was reserved after five runs of recycling. In addition to glucose, the Sn‐Al‐Beta‐ 4‐8 /[C 4 mim]Cl system was also proven to have the potential to effectively convert other carbohydrates into 5‐HMF. CONCLUSION The results suggested that the catalyst is convenient to prepare and has preferable efficiency and stability in the conversion of carbohydrates into 5‐HMF. © 2022 Society of Chemical Industry (SCI).

Zhang, Wei↗
DOE OSTI2020

Isomer-Dependent Reaction Mechanisms of Cyclic Ether Intermediates: cis -23-Dimethyloxirane and trans -23-Dimethyloxirane.

Oxiranes are a class of cyclic ethers formed in abundance during low-temperature combustion of hydrocarbons and biofuels, either via chain-propagating steps that occur from unimolecular decomposition of β-hydroperoxyalkyl radicals (β-˙QOOH) or from reactions of HÒO with alkenes. The cis- and trans-isomers of 2,3-dimethyloxirane are intermediates of n-butane oxidation, and while rate coefficients for β-˙QOOH → 2,3-dimethyloxirane + OH are reported extensively, subsequent reaction mechanisms of the cyclic ethers are not. As a result, chemical kinetics mechanisms commonly adopt simplified chemistry to describe the consumption of 2,3-dimethyloxirane by convoluting several elementary reactions into a single step, which may introduce mechanism truncation error—uncertainty derived from missing or incomplete chemistry. The present research examines the isomerdependence of 2,3-dimethyloxirane reaction mechanisms in support of ongoing efforts to minimize mechanism truncation error. Reaction mechanisms are inferred via the detection of products from Cl-initiated oxidation of both cis-2,3-dimethyloxirane and trans-2,3-dimethyloxirane using multiplexed photoionization mass spectrometry (MPIMS). The experiments were conducted at 10 Torr and temperatures of 650 K and 800 K. To complement the experiments, the enthalpies of stationary points on the ˙R + O 2 surfaces were computed at the ccCA-PS3 level of theory. In total, 28 barrier heights were computed on the 2,3-dimethyloxiranylperoxy surfaces. Two notable aspects are low-lying pathways that form resonance-stabilized ketohydroperoxide-type radicals caused by ˙QOOH ring-opening when the unpaired electron is localized adjacent to the ether group, and cis-trans isomerization of ˙R and ˙QOOH radicals, via inversion, which enable reaction pathways otherwise restricted by stereochemistry. Several species were identified in the MPIMS experiments from ring opening of 2,3-dimethyloxiranyl radicals. Neither of the two conjugate alkene isomers prototypical of ˙R + O 2 reactions were detected. Products were also identified from decomposition of ketohydroperoxide-type radicals. The present work provides the first analysis of 2,3-dimethyloxirane oxidation chemistry and reveals that consumption pathways are complex and require the expansion of submechanisms in chemical kinetics mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Diol isomer revealed as a source of methyl ketene from propionic acid unimolecular decomposition

Carboxylic acids are important combustion intermediates, especially regarding the combustion of oxygenates such as ethyl esters. The purpose of this study is to discern the unimolecular decomposition pathways of one such carboxylic acid, propionic acid, using microreactor flow experiments with line-tunable photoionization mass spectrometry and infrared spectroscopy, along with high-level electronic structure calculations (CCSD(T)/cc-pV∞Z//M06-2X/cc-pVTZ level of theory) and master equation theory. Here, microreactor experiments were performed at 300–1500 K, pressures decreasing from roughly 300 Torr to vacuum pressure, and around 100 μs residence times. Primary products are methyl ketene, ketene, ethylene, and methyl radical. Theory suggests the two lowest energy bond fissions are active at these conditions and responsible for the production of ketene, methyl radical, and some ethylene. Importantly, theory revealed the significance of the isomerization of propionic acid to propene-1,1-diol, and the subsequent dehydrogenation reaction of the diol as an alternative explanation for the unimolecular formation of methyl ketene. This is predicted to be the dominant thermal decomposition pathway at lower temperatures (up to ~850 K). Line-tunable VUV photons allowed for isomer resolution of the products and showed no evidence of the diol of propionic acid surviving until detection, suggesting propene-1,1-diol decomposes either to methyl ketene and water rapidly, fragments upon ionization to a distonic ion inseparable from methyl ketene through our detection methods, or never stabilizes as propionic acid well-skips directly to methyl ketene. Infrared spectroscopy showed no evidence of the decarboxylation of propionic acid at these conditions. Updated rate constants and branching ratios for propionic acid decomposition are calculated and provided for future modeling studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Investigation of the Impurities in Erythritol Tetranitrate (ETN) Using UHPLC-QTOF

In order to further gain a comprehensive chemical understanding of erythritol tetranitrate (ETN), the synthesis impurities of ETN were investigated using ultrahigh performance liquid chromatography with tandem high resolution mass spectrometry (UHPLC-MS/MS). A total of 12 impurities were identified relating to the synthesis of ETN. We have synthesized pure analytical standards of erythritol-1,4-dinitrate (1,4-EDiN) and erythritol-1,2,4-trinitrate (1,2,4-ETriN). Furthermore, these isomerically pure standards have allowed for confirmation of the identity of some of the discovered impurities. Additionally, partially nitrated with sulfate substituted erythritol was identified which is theorized to have formed from the incomplete displacement of the formed sulfate group on the alcohol position during nitration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

High-Pressure Characterization of Two Stereoisomers of Tetranitroester Cyclobutane

The high-pressure behavior of two stereoisomeric cyclobutane nitric ester materials were studied at room temperature to near 25 GPa via Raman spectroscopy and powder X-ray diffraction. The materials investigated included [cis-trans-cis]- and [all-cis]-tetranitrate ester cyclobutanes. Over the course of these studies no evidence of polymorphism was observed, highlighting the stability of the ambient pressure crystal structures of the cyclobutanes to conditions near the detonation pressure of the material. Differences were observed between the bulk moduli of the two stereoisomers, suggesting potential tunability in materials response under dynamic conditions through the use of isomeric materials. Finally, such findings suggest that these high-performance materials can serve as TNT replacement in novel melt-castable energetic formulations without the concern of uncontrolled polymorphism that might otherwise affect the performance and safety of a munition.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2025

Effect of Entropic Constraints on the Thermodynamics of Molecular Adsorption in Nano‐Porous Materials

Abstract Gas separation is a critical industrial process that consumes a significant amount of energy due to the widely used techniques that are currently employed. Adsorptive materials—such as metal–organic frameworks (MOFs)—show promise as an energy‐efficient alternative. Of particular current interest are novel, temperature‐dependent separation processes in MOFs, such as the recently reported separation of ternary isomeric hydrocarbon mixtures within one and the same material. However, the mechanisms of these highly desirable separations remain poorly understood. Herein, through a combination of ab initio simulations and statistical mechanics, it is shown that the temperature dependence is the result of a constraint on the guest molecule's entropic degrees of freedom when loaded into the MOF, caused by the fortuitous tight fitting of the guest inside the pore. While the framework applies to all molecular adsorption in porous media, it is essential for the description of large molecules in small pores, which is demonstrated here using the separation of C6 isomers in Ca(H 2 tcpb) as a test case. The developed framework and analysis not only reveal the reason why separation occurs but also predict the temperatures at which it takes place, thus opening the door to newly designed MOFs with tailor‐made precision.

Chemistry↗
DOE OSTI2021

First-Row Transition Metals Complexes with Fused Oxazolidine (FOX) Ligands

In this comprehensive study, we report the syntheses and crystal structures of 6 fused oxazolidine (FOX) bicycles and 22 complexes with FOX ligands. The structures are compared to the few FOX complexes found in literature. For our investigations, we developed synthetic strategies to selectively synthesize chiral or achiral FOX bicycles with pyridyl substituents. The coordination chemistry of the chiral and achiral FOX compounds with first-row transition metals is discussed in an indepth analysis of the crystal structures. We found that the binding modes of the ligands are dependent on the configuration of the FOX backbone and on the steric demand of the substituents which were introduced to the pyridyl groups. Here, the configuration of the FOX ligands is retained during the coordination of metal(II) ions such as Mn 2+ , Fe 2+ , Co 2+ , Ni 2+ , Cu 2+ . Reactions of these metal ions with chiral FOX ligands lead to the formation of chiral complexes. In contrast, stronger Lewis acidic metal(III) ions, such as Fe 3+ or Al 3+ , induce an isomerization of the chiral FOX ligands to their achiral diastereomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Implementation of Ion Mobility Spectrometry-Based Separations in Structures for Lossless Ion Manipulations (SLIM)

Structures for Lossless Ion Manipulations (SLIM) is a powerful variant of traveling wave ion mobility spectrometry (TW-IMS) that uses a serpentine pattern of microelectrodes deposited onto printed circuit boards to achieve ultralong ion path lengths (13.5 m). Ions are propelled through SLIM platforms via arrays of TW electrodes while RF and DC electrodes provide radial confinement, establishing near lossless transmission. The recent ability to cycle ions multiple times through a SLIM has allowed ion path lengths to exceed 1000 m, providing unprecedented separation power and the ability to observe ion structural conformations unobtainable with other IMS technologies. The combination of high separation power, high signal intensity, and the ability to couple with mass spectrometry places SLIM in the unique position of being able to address longstanding proteomics and metabolomics challenges by allowing the characterization of isomeric mixtures containing low abundance analytes.

Hollerbach, Adam L.↗
DOE OSTI2024

High-resolution ion mobility based on traveling wave structures for lossless ion manipulation resolves hidden lipid features

Abstract High-resolution ion mobility (resolving power > 200) coupled with mass spectrometry (MS) is a powerful analytical tool for resolving isobars and isomers in complex samples. High-resolution ion mobility is capable of discerning additional structurally distinct features, which are not observed with conventional resolving power ion mobility (IM, resolving power ~ 50) techniques such as traveling wave IM and drift tube ion mobility (DTIM). DTIM in particular is considered to be the “gold standard” IM technique since collision cross section (CCS) values are directly obtained through a first-principles relationship, whereas traveling wave IM techniques require an additional calibration strategy to determine accurate CCS values. In this study, we aim to evaluate the separation capabilities of a traveling wave ion mobility structures for lossless ion manipulation platform integrated with mass spectrometry analysis (SLIM IM-MS) for both lipid isomer standards and complex lipid samples. A cross-platform investigation of seven subclass-specific lipid extracts examined by both DTIM-MS and SLIM IM-MS showed additional features were observed for all lipid extracts when examined under high resolving power IM conditions, with the number of CCS-aligned features that resolve into additional peaks from DTIM-MS to SLIM IM-MS analysis varying between 5 and 50%, depending on the specific lipid sub-class investigated. Lipid CCS values are obtained from SLIM IM ( TW(SLIM) CCS) through a two-step calibration procedure to align these measurements to within 2% average bias to reference values obtained via DTIM ( DT CCS). A total of 225 lipid features from seven lipid extracts are subsequently identified in the high resolving power IM analysis by a combination of accurate mass-to-charge, CCS, retention time, and linear mobility-mass correlations to curate a high-resolution IM lipid structural atlas. These results emphasize the high isomeric complexity present in lipidomic samples and underscore the need for multiple analytical stages of separation operated at high resolution. Graphical abstract

Reardon, Allison R. (ORCID:0000000165830134)↗
DOE OSTI2025

Radiochemical transport analysis of gamma spectroscopic data to support estimation of molten salt reactor off-gas inventories

This work introduces a novel application of radiochronometry to estimate nuclide inventories in molten salt reactor off-gas systems based on gamma spectroscopic data from the Molten Salt Reactor Experiment. By analyzing isotopic, isobaric, and isomeric activity ratios, key depletion model parameters related to species transport within the reactor system could be inferred. The findings demonstrate the potential of leveraging a limited subset of gamma spectroscopy measurements to accurately estimate nuclide inventories throughout the off-gas system. The approach can be useful in reactor design activities and support analyses relevant to operations, safety, security, and safeguards.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Integrating the Fields of Catalysis: Active Site Engineering in Metal Cluster, Metal Organic Framework and Metal Single Site

Research evolved using nanoparticles synthesized and characterized under reaction conditions opened the door to study all three fields of catalysis: heterogeneous, homogenous, and enzyme. Fundamental studies of catalytic reactions ranging from hydrogenation to understand Fischer-Tropsch synthesis and isomerization ultimately led to the integration of three fields of catalysis. Our recent work on bridging heterogeneous, homogenous, and enzymatic catalysis was present including functionalization of dendrimer encapsulated metal clusters surface for lactonization, active site engineering in metal organic framework catalysts for methanol production and oligomerization, and single site catalyst for hydrogen production. We envision that the combination of active site engineering and unifying fields of catalysis could be applied to solve practical issues of science-based technology and develop new fields useful in energy research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗