Improving Thermal and Photostability of Polymer Solar Cells by Robust Interface Engineering
Explore the source record for details and available documents.
Su, Li-Yun↗
SEARCH · Engineering Papers
Results for “Interface modification”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
FFT methods in signal processing of the coal interface detector radar
The FM radar for the coal interface detector, operating in the frequency band 2 to 4 GHz, is intended for the display of thicknesses between 2 cm and 20 cm. Because of such a short range, the thickness information is contained in the very few lowest spectral components of the output signal. To overcome this inconvenience, the Fourier series of the output signal was augmented to approximate a Fourier integral. This modification in the signal processing resulted in a higher spectral density, which in turn enabled an easier identification of the interface position in the laboratory. The orientation and spacing of the receiving and transmitting antennas is found to have an important influence on the system performance.
Kajfez, D.↗
OLTARIS: On-Line Tool for the Assessment of Radiation in Space
The On-Line Tool for the Assessment of Radiation In Space (OLTARIS) is a World Wide Web based tool that assesses the effects of space radiation on humans and electronics in items such as spacecraft, habitats, rovers, and spacesuits. This document explains the basis behind the interface and framework used to input the data, perform the assessment, and output the results to the user as well as the physics, engineering, and computer science used to develop OLTARIS. The transport and physics is based on the HZETRN and NUCFRG research codes. The OLTARIS website is the successor to the SIREST website from the early 2000's. Modifications have been made to the code to enable easy maintenance, additions, and configuration management along with a more modern web interface. Overall, the code has been verified, tested, and modified to enable faster and more accurate assessments.
Singleterry, Robert C., Jr.↗
A Micro-scale Numerical Investigation of Internal and Interfacial Void Defects in Adhesive on Failure Behavior of Adhesively-Bonded Materials with Rough Surfaces
This paper studied the effects of air void defects on the failure behavior of adhesively-bonded materials under global shear via micro-scale computational modeling. The numerical results indicated that interfacial void defects can largely facilitate interfacial debonding of a weaker adherend/adhesive interface under shear. However, this is not the case for a stronger adherend/adhesive interface, showing the reduction on the nominal shear strength of an adhesive joint is mainly due to internal void defects. The reduced bonding performance due to voids can be improved by leveraging an appropriate surface roughness. This preliminary investigation is a first step to better understand the micro-mechanics of interfacial failure in the adhesion of a roughened/patterned adherend via surface modification(s) and an adhesive, and also shows the importance of minimizing interfacial void defects in particular at a weaker adherend/adhesive interface via different techniques.
Qiao, Yao↗
Nanoscale imaging of phonon dynamics by electron microscopy
Spatially resolved vibrational mapping of nanostructures is indispensable to the development and understanding of thermal nanodevices, modulation of thermal transport and novel nanostructured thermoelectric materials. Through the engineering of complex structures, such as alloys, nanostructures and superlattice interfaces, one can significantly alter the propagation of phonons and suppress material thermal conductivity while maintaining electrical conductivity. There have been no correlative experiments that spatially track the modulation of phonon properties in and around nanostructures due to spatial resolution limitations of conventional optical phonon detection techniques. Here we demonstrate two-dimensional spatial mapping of phonons in a single silicon–germanium (SiGe) quantum dot (QD) using monochromated electron energy loss spectroscopy in the transmission electron microscope. Tracking the variation of the Si optical mode in and around the QD, we observe the nanoscale modification of the composition-induced red shift. We observe non-equilibrium phonons that only exist near the interface and, furthermore, develop a novel technique to differentially map phonon momenta, providing direct evidence that the interplay between diffuse and specular reflection largely depends on the detailed atomistic structure: a major advancement in the field. Our work unveils the non-equilibrium phonon dynamics at nanoscale interfaces and can be used to study actual nanodevices and aid in the understanding of heat dissipation near nanoscale hotspots, which is crucial for future high-performance nanoelectronics.
36 MATERIALS SCIENCE↗
Autonomous Formation Flying from Ground to Flight
The cost of on-orbit operations remains a significant and increasingly visible concern in the support of satellite missions. Headway has been made in automating some ground operations; however, increased mission complexity and more precise orbital constraints have compelled continuing human involvement in mission design and maneuver planning operations. AI Solutions, Inc. in cooperation with the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) has tackled these more complex problems through the development of AutoCon as a tool for an automated solution. NASA is using AutoCon to automate the maneuver planning for the Earth Orbiter-1 (EO-1) mission. AutoCon was developed originally as a ground system tool. The EO-1 mission will be using a scaled version of AutoCon on-board the EO-1 satellite to command orbit adjustment maneuvers. The flight version of AutoCon plans maneuvers based on formation flying algorithms developed by GSFC, JPL, and other industry partners. In its fully autonomous mode, an AutoCon planned maneuver will be executed on-board the satellite without intervention from the ground. This paper describes how AutoCon automates maneuver planning for the formation flying constraints of the EO-1 mission. AutoCon was modified in a number of ways to automate the maneuver planning on-board the satellite. This paper describes how the interface and functionality of AutoCon were modified to support the on-board system. A significant component of this modification was the implementation of a data smoother, based on a Kalman filter, that ensures that the spacecraft states estimated by an on-board GPS receiver are as accurate as possible for maneuver planning. This paper also presents the methodology use to scale the AutoCon functionality to fit and execute on the flight hardware. This paper also presents the modes built that allow the incremental phasing in of autonomy. New technologies for autonomous operations are usually received with significant, and probably appropriate trepidation. A number of safeguards have been designed in both AutoCon and the interfacing systems to alleviate the potential of mission-impacting anomalies from the on-board autonomous system. This paper describes the error checking, input data integrity validation and limits set on maneuvers in AutoCon and the on-board system.
Chapman, Keith B.↗
The Environment for Application Software Integration and Execution (EASIE), version 1.0. Volume 3: Program execution guide
The Environment for Application Software Integration and Execution, EASIE, provides a methodology and a set of software utility programs to ease the task of coordinating engineering design and analysis codes. EASIE was designed to meet the needs of conceptual design engineers that face the task of integrating the results of many stand-alone engineering analysis programs. EASIE provides access to these programs via a quick, uniform, user-friendly interface. In addition, EASIE provides utilities which aid in the execution of the following tasks: selection of application programs, modification and review of program data, automatic definition and coordination of data files during program execution and a logging of steps executed throughout a design study. Volume 3, the Program Execution Guide, describes the executive capabilities provided by EASIE and defines the command language and menus available under Version 1.0. EASIE provides users with two basic modes of operation. One is the Application-Derived Executive (ADE) which provides users with sufficient guidance to quickly review data, select menu action items, and execute application programs. The second is the Complete Control Executive (CCE), which provides a full executive interface allowing users in-depth control of the design process.
Schwing, James L.↗
Coupling TRACE with nodal neutronics code Ants using the Exterior Communications Interface and VTT's multi-physics driver Cerberus
In this paper a recently developed coupling between system code TRACE and nodal neutronics code Ants is presented. The TRAC/RELAP Advanced Computational Engine (TRACE) is a reactor system code developed by U.S. Nuclear Regulatory Commission (NRC). The code has been designed to analyse loss-of-coolant accidents (LOCAs), operational transients and other accident scenarios in light water reactors. Ants is the reduced order nodal neutronics code of the Kraken framework. The diffusion solution method in Ants is based on the Analytic Function Expansion Nodal method (AFEN) and Flux Expansion Nodal Method (FENM). Rectangular, hexagonal and triangular geometries are supported. Both steady state and burnup problems including micro-depletion can be simulated. The coupling is implemented using VTT's multi-physics driver Cerberus and the Exterior Communications Interface (ECI) which is supplied with TRACE and enables the coupling of TRACE without source code modifications. The main focus in the paper is on describing the TRACE-Ants coupling in detail in order to share to other code developers what we have learned from the ECI based coupling process. The coupled code system is briefly tested by simulating a simple transient in a SMR core initiated by control rod movement. The results of the test calculation look reasonable and more complicated test cases will be modelled in the near future.
22 GENERAL STUDIES OF NUCLEAR REACTORS↗
Experimental and numerical evaluation of laser shinethrough in polystyrene at 3 ω and 4 ω laser frequencies
In laser-direct-drive inertial confinement fusion (ICF), laser shinethrough is the process associated with laser propagation through the target plastic ablator, polystyrene is often used in ICF experiments, and leads to energy deposition in the target until the critical density is established at the ablator front surface. This process causes material modifications that may change the shock propagation and lead to density and pressure perturbations at the interface between the polystyrene and cryogenic deuterium-tritium (DT) layer. This work reports on experimental observations and numerical investigations of laser shinethrough at the third and the fourth harmonic of ICF class laser systems (1 ω corresponds to a wavelength of ∼1.06 μm ). The experiments evidence that, at 4 ω , the laser is absorbed over a distance of about a few microns and laser shinethrough is completely eliminated in contrast with the behavior at 3 ω . These experimental observations are reproduced by numerical simulations. The laser fluence required to reach the critical density at the ablator front surface is also found to be more than one order of magnitude higher at the third harmonic. Finally, modeling suggests that the back surface of the ablator exhibits ion temperatures greater than the melting temperature of cryogenic DT and electron pressure larger than the bulk and shear moduli of cryogenic DT for the case of using a 3 ω laser.
Pineau, A. [Univ. of Rochester, NY (United States)↗
Shuttle mission simulator baseline definition report, volume 1
A baseline definition of the space shuttle mission simulator is presented. The subjects discussed are: (1) physical arrangement of the complete simulator system in the appropriate facility, with a definition of the required facility modifications, (2) functional descriptions of all hardware units, including the operational features, data demands, and facility interfaces, (3) hardware features necessary to integrate the items into a baseline simulator system to include the rationale for selecting the chosen implementation, and (4) operating, maintenance, and configuration updating characteristics of the simulator hardware.
Burke, J. F.↗
Orbital demonstration - The prelude to large operational structures in space
The paper surveys three specific large space structures which have been analyzed to determine the technology needed to achieve a fully operational system. These are the multipurpose platforms; satellite power systems, and a deployable antenna. Further attention is also given to those technology needs which can be satisfied by ground based technology (simulation), such as payload carrier modification or design, platform element connectors and fittings, data compression and storage equipment, man-machine interface and productivity assessment, and astronaut aids. Also covered are those technology and performance parameters which require demonstration in orbit.
Hagler, T.↗
Concepted design of a surface measurement system for large deployable space antennas
The sensor system is in essence a point design, specifically interfacing with the Harris, Inc., 1000 meter deployable mesh communication antenna. The design can, without large modification, be adapted to other large deployable antennas such as the Lockheed Wrap-rib, the General Dynamics Precision Erectable Truss and the TRW Advanced Sunflower antennas. Measurements are optical displacements. The elements of the system are a central cluster of receivers near the apex of the antenna and active bright targets at the antenna. The cluster defines a single coordinate frame from which all surface positions are referenced. The receivers continuously observe an extended array of sample points located throughout the reflecting surface and its supporting structure. For the Harris antenna, the surface samples are at the mesh gore lines and at the supporting hoop. Output data is in real-time, compatible with on-board processing and active control of antenna figure. Lifetime of the system is at least 10 years continuous operation in space.
Neiswander, R. S.↗
Evaluating human performance modeling for system assessment: Promise and problems
The development and evaluation of computational human performance models is examined. An intention is to develop models which can be used to interact with system prototypes and simulations to perform system assessment. Currently LR is working on a set of models emulating cognitive, psychomotor, auditory, and visual activity for multiple operator positions of a command and control simulation system. These models, developed in conjunction with BBN Systems and Technologies, function within the simulation environment and allow for both unmanned system assessment and manned (human-in-loop) assessment of system interface and team interactions. These are relatively generic models with built-in flexibility which allows modification of some model parameters. These models have great potential for improving the efficiency and effectiveness of system design, test, and evaluation. However, the extent of the practical utility of these models is unclear. Initial verification efforts comparing model performance within the simulation to actual human operators on a similar, independent simulation have been performed and current efforts are directed at comparing human and model performance within the same simulation environment.
Patterson, Robert W.↗
Implementation of the WICS Wall Interference Correction System at the National Transonic Facility
The Wall Interference Correction System (WICS) is operational at the National Transonic Facility (NTF) of NASA Langley Research Center (NASA LaRC) for semispan and full span tests in the solid wall (slots covered) configuration, The method is based on the wall pressure signature method for computing corrections to the measured parameters. It is an adaptation of the WICS code operational at the 12 ft pressure wind tunnel (12ft PWT) of NASA Ames Research Center (NASA ARC). This paper discusses the details of implementation of WICS at the NTF including, tunnel calibration, code modifications for tunnel and support geometry, changes made for the NTF wall orifices layout, details of interfacing with the tunnel data processing system, and post-processing of results. Example results of applying WICS to a semispan test and a full span test are presented. Comparison with classical correction results and an analysis of uncertainty in the corrections are also given. As a special application of the code, the Mach number calibration data from a centerline pipe test was computed by WICS. Finally, future work for expanding the applicability of the code including online implementation is discussed.
Iyer, Venkit↗
Implementation of the WICS Wall Interference Correction System at the National Transonic Facility
The Wall Interference Correction System (WICS) is operational at the National Transonic Facility (NTF) of NASA Langley Research Center (NASA LaRC) for semispan and full span tests in the solid wall (slots covered) configuration. The method is based on the wall pressure signature method for computing corrections to the measured parameters. It is an adaptation of the WICS code operational at the 12 ft pressure wind tunnel (12ft PWT) of NASA Ames Research Center (NASA ARC). This paper discusses the details of implementation of WICS at the NTF including tunnel calibration, code modifications for tunnel and support geometry, changes made for the NTF wall orifices layout, details of interfacing with the tunnel data processing system, and post-processing of results. Example results of applying WICS to a semispan test and a full span test are presented. Comparison with classical correction results and an analysis of uncertainty in the corrections are also given. As a special application of the code, the Mach number calibration data from a centerline pipe test was computed by WICS. Finally, future work for expanding the applicability of the code including online implementation is discussed.
Iyer, Venkit↗
Antigen‐binding fragments with improved crystal lattice packing and enhanced conformational flexibility at the elbow region as crystallization chaperones
It has been shown previously that a set of three modifications—termed S1, Crystal Kappa, and elbow—act synergistically to improve the crystallizability of an antigen-binding fragment (Fab) framework. Here, we prepared a phage-displayed library and performed crystallization screenings to identify additional substitutions—located near the heavy-chain elbow region—which cooperate with the S1, Crystal Kappa, and elbow modifications to increase expression and improve crystallizability of the Fab framework even further. One substitution (K141Q) supports the signature Crystal Kappa-mediated Fab:Fab crystal lattice packing interaction. Another substitution (E172G) improves the compatibility of the elbow modification with the Fab framework by alleviating some of the strain incurred by the shortened and bulkier elbow linker region. A third substitution (F170W) generates a split-Fab conformation, resulting in a powerful crystal lattice packing interaction comprising the biological interaction interface between the variable heavy and light chain domains. In sum, we have used K141Q, E172G, and F170W substitutions—which complement the S1, Crystal Kappa, and elbow modifications—to generate a set of highly crystallizable Fab frameworks that can be used as chaperones to enable facile elucidation of Fab:antigen complex structures by x-ray crystallography.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Autonomous Formation Flying from the Ground to Flight
The cost of on-orbit operations remains a significant and increasingly visible concern in the support of satellite missions. Headway has been made in automating some ground operations; however, increased mission complexity and more precise orbital constraints have compelled continuing human involvement in mission design and maneuver planning operations. AI Solutions, Inc. in cooperation with the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) has tackled these more complex problems through the development of AutoCon(TM) as a tool for an automated solution. NASA is using AutoCon(TM) to automate the maneuver planning for the Earth Orbiter-1 (EO-1) mission. AutoCon(TM) was developed originally as a ground system tool. The EO-1 mission will be using a scaled version of AutoCon(TM) on-board the EO-1 satellite to command orbit adjustment maneuvers. The flight version of AutoCon(TM) plans maneuvers based on formation flying algorithms developed by GSFC, JPL, and other industry partners. In its fully autonomous mode, an AutoCon(TM) planned maneuver will be executed on-board the satellite without intervention from the ground. This paper describes how AutoCon(TM) automates maneuver planning for the formation flying constraints of the EO-1 mission. AutoCon(TM) was modified in a number of ways to automate the maneuver planning on-board the satellite. This paper describes how the interface and functionality of AutoCon(TM) were modified to support the on-board system. A significant component of this modification was the implementation of a data smoother, based on a Kalman filter, that ensures that the spacecraft states estimated by an on-board GPS receiver are as accurate as possible for maneuver planning. This paper also presents the methodology used to scale the AutoCon(TM) functionality to fit and execute on the flight hardware. This paper also presents the modes built into the system that allow the incremental phasing in of autonomy. New technologies for autonomous operations are usually received with significant, and probably appropriate, trepidation. A number of safeguards have been designed in both AutoCon(TM) and the interfacing systems to alleviate the potential of mission-impacting anomalies from the on-board autonomous system. This paper describes the error checking, input data integrity validation, and limits set on maneuvers in AutoCon(TM) and the on-board system.
Chapman, Keith B.↗
The theory of interface slicing
Interface slicing is a new tool which was developed to facilitate reuse-based software engineering, by addressing the following problems, needs, and issues: (1) size of systems incorporating reused modules; (2) knowledge requirements for program modification; (3) program understanding for reverse engineering; (4) module granularity and domain management; and (5) time and space complexity of conventional slicing. The definition of a form of static program analysis called interface slicing is addressed.
Beck, Jon↗