Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Self-Consistent Model of Magnetospheric Ring Current and Propagating Electromagnetic Ion Cyclotron Waves: Waves, Precipitating Ring Current Ions, and Thermal Electron Heating - 2

This paper is dedicated to further presentations and discussions of the results from our new global self-consistent theoretical model of interacting ring current ions and electromagnetic ion cyclotron waves [Khazanov et al., 2006; here referred to as Paper 1]. In order to adequately take into account the wave propagation and refraction in a multi-ion plasmasphere, we explicitly include the ray tracing equations in our previous self-consistent model and use the general form of the wave kinetic equation [for details see Paper 1]. To demonstrate the effects of the EMIC wave propagation and refraction on the RC proton precipitations and heating of the thermal plasmaspheric electrons we simulate the May 1998 storm. The main findings of our simulation can be summarized as follows. Firstly, the wave induced precipitations have a quite fine structure, and are highly organized by location of the plasmapause gradient. The strongest fluxes of about 4 (raised dot) 10(exp 6) [(cm (raised dot) s (raised dot) sr)(sup -l)] are observed during the main and early recovery phases of the storm. The very interesting and probably more important finding is that in a number of cases the most intense precipitating fluxes are not simply connected to the most intense EMIC waves. The character of the EMIC wave power spectral density distribution over the equatorial wave normal angle is an extremely crucial for the effectiveness of the RC ion scattering. Secondly, comparison of the global proton precipitating patterns with the results from other ring current model [Kozyra et al., 1997] reveals that although we observe a qualitative agreement between localizations of the wave induced fluxes in the models, there is no quantitative agreement between the magnitudes of these fluxes. These differences are mainly due to a qualitative difference between the characters of the EMIC wave power spectral density distributions over the equatorial wave normal angle. Finally, the two energy sources to the plasmaspheric electrons are considered; (i) the heat fluxes caused by the EMIC wave energy absorption due to Landau resonance, and (ii) the heat fluxes due to Coulomb energy degradation of the RC o(+) ions. The heat fluxes caused by the EMIC wave energy absorption due to Landau resonance are observed in the postnoon-premidnight MLT sector, and maximize at the magnitude of 10l1 (eV/(cm(sup 2)(raised dot) s) at L=3.25, MLT=22 at 3400 UT after 1 May, 0000 UT. The greatest Coulomb energy deposition rates are about 2 (raised dot) 10(sup 10)(eV/(cm(sup 2)(raised dot) s) and observed during two periods; 32-48 hours, and 76-86 hours after 1 May, 0000 UT. The theoretically derived spatial structure of the thermal electron heating caused by interaction of the RC with plasmasphere is strongly supported by concurrent and conjugate plasma measurements from the plasmasphere, the RC, and the topside ionosphere [Gurgiolo et al., 20051.

Khazanov, G. V.↗
NASA NTRS2006

Self-Consistent Ring Current Modeling with Propagating Electromagnetic Ion Cyclotron Waves in the Presence of Heavy Ions

The self-consistent treatment of the RC ion dynamics and EMlC waves, which are thought to exert important influences on the ion dynamical evolution, is an important missing element in our understanding of the storm-and recovery-time ring current evolution. Under certain conditions, relativistic electrons, with energies greater than or equal to 1 MeV, can be removed from the outer radiation belt by EMlC wave scattering during a magnetic storm (Summers and Thorne, 2003; Albert, 2003). That is why the modeling of EMlC waves is critical and timely issue in magnetospheric physics. This study will generalize the self-consistent theoretical description of RC ions and EMlC waves that has been developed by Khazanov et al. [2002, 2003] and include the heavy ions and propagation effects of EMlC waves in the global dynamic of self-consistent RC - EMlC waves coupling. The results of our newly developed model that will be presented at Huntsville 2006 meeting, focusing mainly on the dynamic of EMlC waves and comparison of these results with the previous global RC modeling studies devoted to EMlC waves formation. We also discuss RC ion precipitations and wave induced thermal electron fluxes into the ionosphere.

Khazanov, G. V.↗
NASA NTRS2007

Space Plasma Ion Processing of Ilmenite in the Lunar Soil: Insights from In-Situ TEM Ion Irradiation Experiments

Space weathering on the moon and asteroids results largely from the alteration of the outer surfaces of regolith grains by the combined effects of solar ion irradiation and other processes that include deposition of impact or sputter-derived vapors. Although no longer considered the sole driver of space weathering, solar ion irradiation remains a key part of the space weathering puzzle, and quantitative data on its effects on regolith minerals are still in short supply. For the lunar regolith, previous transmission electron microscope (TEM) studies performed by ourselves and others have uncovered altered rims on ilmenite (FeTiO3) grains that point to this phase as a unique "witness plate" for unraveling nanoscale space weathering processes. Most notably, the radiation processed portions of these ilmenite rims consistently have a crystalline structure, in contrast to radiation damaged rims on regolith silicates that are characteristically amorphous. While this has tended to support informal designation of ilmenite as a "radiation resistant" regolith mineral, there are to date no experimental data that directly and quantitatively compare ilmenite s response to ion radiation relative to lunar silicates. Such data are needed because the radiation processed rims on ilmenite grains, although crystalline, are microstructurally and chemically complex, and exhibit changes linked to the formation of nanophase Fe metal, a key space weathering process. We report here the first ion radiation processing study of ilmenite performed by in-situ means using the Intermediate Voltage Electron Microscope- Tandem Irradiation facility (IVEM-Tandem) at Argonne National Laboratory. The capability of this facility for performing real time TEM observations of samples concurrent with ion irradiation makes it uniquely suited for studying the dose-dependence of amorphization and other changes in irradiated samples.

Christoffersen, R.↗
NASA NTRS2018

Computational Investigation of the Near-Field Plasma Plume in Ion-Ion Propulsion

A two-fluid computational model of plasma flows was developed to investigate the plume of an ion-ion propulsion system. The densities of positive and negative ions, along with the associated values of net charge, electric field, and electric potential were calculated throughout the domain. The computational domain was chosen to be large enough (25 thruster diameters downstream of the accelerating grids) to examine the neutralization of the plume. The resulting plasma electric potential and charge neutrality at the downstream end of the domain are shown. The results from this simulation are compared to existing literature on ion-ion plasma thrusters.

Sankaran, K.↗
DOE OSTI2024

Bioleaching ion-unexchangeable rare earth in ion-adsorption type rare earth waste tailing

Ion-adsorption type rare earth ores (IREO) in China serve as the primary source of medium and heavy rare earth globally. With the rapidly growing demand for rare earth elements (REEs) and the dwindling supply of premium IREO, enhancing the recovery of REEs, especially the ion-unexchangeable REEs with ultra-low content and ambiguous speciation from IREO or its tailing, has become a critical trend and challenge. Here, this study identified the occurrences of ion-unexchangeable REEs, primarily detected in Fe-enriched minerals, xenotime, and monazite of IREO using TESCAN integrated mineral analyzer (TIMA) and laser ablation inductively coupled plasma mass spectrometer (LA-ICP-MS) analysis. To extract these elusive REEs, a bioleaching technique utilizing Aspergillus niger (A. niger) metabolites was proposed, achieving a leaching yield of 31.4 wt%. Complementary sequential chemical extraction methods (SCEM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations further elucidate the underlying mechanism, involving the carboxylic acid produced by the metabolic process of microbes that dissolves goethite by disrupting Fe—O bonds and liberating REEs, which complexed with carboxylate (R—COO—), to promote further dissolution. This work offers insight into enhancing the recovery of ion-unexchangeable REEs from IREO or its tailing, paving the way for sustainable and efficient rare earth mining practices.

42 ENGINEERING↗
NASA NTRS2001

Development of a fully integrated analysis system for ions based on ion-selective optodes and centrifugal microfluidics

A fully integrated, miniaturized analysis system for ions based on a centrifugal microfluidics platform and ion-selective optode membranes is described. The microfluidic architecture is composed of channels, five solution reservoirs, a measuring chamber, and a waste reservoir manufactured onto a disk-shaped substrate of poly(methyl methacrylate). Ion-selective optode membranes, composed of plasticized poly(vinyl chloride) impregnated with an ionophore, a proton chromoionophore, and a lipophilic anionic additive, were cast, with a spin-on device, onto a support layer and then immobilized on the disk. Fluid propulsion is achieved by the centrifugal force that results from spinning the disk, while a system of valves is built onto the disk to control flow. These valves operate based on fluid properties and fluid/substrate interactions and are controlled by the angular frequency of rotation. With this system, we have been able to deliver calibrant solutions, washing buffers, or "test" solutions to the measuring chamber where the optode membrane is located. An analysis system based on a potassium-selective optode has been characterized. Results indicate that optodes immobilized on the platform demonstrate theoretical responses in an absorbance mode of measurement. Samples of unknown concentration can be quantified to within 3% error by fitting the response function for a given optode membrane using an acid (for measuring the signal for a fully protonated chromoionophore), a base (for fully deprotonated chromoionophore), and two standard solutions. Further, the ability to measure ion concentrations by employing one standard solution in conjunction with acid and base and with two standards alone were studied to delineate whether the current architecture could be simplified. Finally, the efficacy of incorporating washing steps into the calibration protocol was investigated.

NASA Discipline Life Sciences Technologies↗
DOE OSTI2023

Novel effects of grain size and ion implantation on grain boundary segregation in ion irradiated austenitic steel

Nuclear reactor environments are extreme in nature due to the combination of exposure to corrosive coolant, mechanical stresses, and neutron irradiation damage. This combination of environments can lead to irradiation induced/assisted precipitation, segregation, and embrittlement coupled with enhanced creep and stress corrosion cracking. While nanostructured materials are of interest in a variety of applications due to their unique properties including high mechanical strength, for nuclear applications nanostructured materials have the added benefit of irradiation resistance due to the high volume density of sinks for irradiation-induced defects. In this study, we show unique radiation-induced segregation (RIS) behavior in nanocrystalline 304 stainless steel (SS304). Typical RIS in austenitic steels includes Ni enrichment and Cr depletion within the grain boundaries. In nanostructured SS304 this RIS is reduced. Furthermore, interestingly, some grain boundaries in the nanocrystalline SS304 in this study were found to be enriched in Cr after Fe 2+ ion irradiation at 500 °C up to 50 displacements per atom (dpa). To understand this unique observation, lattice-based atomic kinetic Monte Carlo simulations were performed to investigate the effects of grain size, thermal segregation, as well as injected interstitials (introduced as Fe self-ions). The results indicate that the Cr enrichment at grain boundaries may be caused by combined effects of grain size, self-ion injection and preferential Cr diffusion via the interstitial mechanism. In conclusion, the findings also suggest a possible difference in RIS between ion and neutron irradiations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Simulating the effects of warm O + ions on the growth of electromagnetic ion cyclotron (EMIC) waves

Electromagnetic ion cyclotron (EMIC) waves are believed to play a crucial role in the dynamics of the Earth’s magnetosphere. It has been widely accepted that plasma compositions can influence the growth rate of EMIC waves in the inner magnetosphere, but how warm O + ions change the wave growth rate is not well known. In this study, we investigate the impact of ring current O + concentration on the EMIC growth rate during a specific storm when the O + ion flux significantly increases. We calculate the growth rate of EMIC waves by using physics-based ion distributions output from the Ring current–Atmosphere interactions Model with Self-Consistent magnetic (B) and Electric (E) fields (RAM-SCBE) model. The percentage of warm O + is parametrically varied to examine how the maximum EMIC growth rate changes over time and how the global distribution of the maximum EMIC growth rate is affected. We found that the maximum growth rate of H-band appears in the dusk-to-midnight sector near the plasmapause, while O-band is excited at a slightly outer region. The maximum growth rate of He-band is closely related to the cold plasma density. With the increase of warm O + density, the maximum growth rate of H-band and He-band EMIC wave is reduced, while that of O-band EMIC wave is increased, and the region with this wave excitation is widened. Furthermore, such variation in the maximum EMIC growth rate implies a potential impact on the associated wave–particle interactions and change of the decay rate in the ring current.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Chemiresistor sensor based on ion-imprinted polymer (IIP)-functionalized rGO for Cd(II) ions in water

This study reports the design and development of a novel chemiresistor (CR) sensor using ion imprinted polymer (IIP)-functionalized reduced graphene oxide (rGO) [IIP/rGO-CR] for cadmium ions (Cd(II)) determination in water. The sensor consisted of a CR transducer made of rGO channel bridging source and drain electrodes prepared by self-assembly and thermal reduction of graphene oxide (GO) on Au interdigitated electrodes chip fabricated on Si/SiO 2 substrate. The IIP was then grafted on rGO using surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization with polyethylenimine (PEI) and methylacrylic acid (MAA) as dual functional monomers and Cd(II) ions as template through UV light-initiated copolymerization. The IIP functionalized on rGO acted as an effective recognition element that modulated the resistance of rGO-CR upon binding of Cd(II), enabling Cd(II) detection at ppb level in aqueous solutions. The prepared IIP/rGO-CR sensor worked effectively in the linear range of 2~200ppb and achieved a limit of detection (LOD) of 0.83 ppb, which is lower than the World Health Organization guidelines of 3ppb for drinking water quality. The developed sensor of IIP/rGO-CR showed a high selectivity against a variety of trace and heavy metal ions found in water and good stability for up to 60 days when stored at room temperature for Cd(II) determination in water. Further, the sensor was successfully applied to analyzing Cd(II) spiked in tap, lake and river waters with a 94.5%–113.5% recovery, demonstrating a high degree of accuracy even in complex water samples. Finally, our results illustrated that the CR sensor of IIP functionalized rGO provides a potential platform for sensitive, robust and low-cost environmental analysis of Cd(II) in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Higher Ion Selectivity with Lower Energy Usage Promoted by Electro-osmotic Flow in the Transport through Conical Nanopores

The tradeoff between selectivity and throughput presents fundamental challenges to improve desalination and charge storage, salinity gradient-based energy harvesting, memory device/circuit development, and so forth. The well-known ion-current rectification and the recently resolved time-dependent transport hysteresis in conical nanopores or asymmetric nanointerfaces offer new opportunities for the selective transport of matter. This report shows that electro-osmotic flow (EOF) is an overlooked factor that increases ion selectivity while maintaining enhanced transport throughput in rectified nanoscale electrokinetic transport. The increased selectivity originates primarily from the suppression of anion flux by the fluid flow in the opposite direction under the applied electrical field. By solving the Poisson and Nernst–Planck (PNP) equations without and with coupled Navier–Stokes (PNP–NS) equations, the EOF effects on cation and anion transport are unequivocally revealed in asymmetric nanopipettes. The flux of cations and anions as well as the transference number and flow velocity are elucidated using the models and boundary conditions validated by previous experiments. A dimensionless parameter, radius over the Debye length, reveals optimal ion selectivity and energy cost at intermediate ion concentrations and nanopore sizes, up to hundreds of millimolars and tens of nanometers under time-dependent potential stimulus. Furthermore, the fundamental insights into EOF at nanointerfaces suggest new routes/strategies for better separation, analysis, and energy applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ion Solvation Engineering: How to Manipulate the Multiplicity of the Coordination Environment of Multivalent Ions

During free energy analysis of solvation structures of free divalent cations, their ion pairs, and neutral aggregates in low dielectric solvents reveals the multiplicity of thermodynamically stable cation solvation configurations and identifies the micro- and macroscopic factors responsible for this phenomenon. Specifically, we show the role of ion-solvent interactions and solvent mixtures in determining the cation solvation free energy landscapes. We show that it is the entropic contribution of solvent degrees of freedom that is responsible for the solvation multiplicity, and the mutual balance between enthalpic and entropic forces or their concerted contributions is what ultimately defines the most stable ion solvation configuration and creates new ones. We show general consequences of ion solvation multiplicity on thermodynamics of complex electrolytes, specifically in the context of homogeneous or interfacial charge transfer. Identified factors and their interplay provide a pathway to formulation of solvation design rules that can be used to control bulk solvation, interfacial chemistry, and charge transfer. Our findings also suggest experimentally testable predictions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Improving the Comprehensive Performance of Na 0.7 MnO 2 for Sodium Ion Batteries by ZrO 2 Atomic Layer Deposition

Sodium ion batteries with Na-Mn-O compounds as cathode have been widely studied as substitutes for lithium ion batteries due to their abundant resources. Still, the relatively poor cycling stability and low capacity of Na-Mn-O compounds significantly limit their applications. Different approaches, including element substitution and surface modification, have been applied to improve the electrochemical performance of those cathode materials. Herein, element doping and coating of ZrO 2 on Na 0.7 MnO 2 particles have been achieved by atomic layer deposition (ALD) followed by post-annealing. The rate capability and cycling stability of the modified material were significantly improved, and the mechanism of performance enhancement was revealed. The ZrO 2 coatings acted as a stable interfacial layer to enhance the cycling stability of Na 0.7 MnO 2 by suppressing side reactions between the electrode and electrolyte. The doping of transition metal ions reduced energy barriers for sodium ion insertion and deintercalation during cycling, further improving the charge and discharge capacity and rate performance of Na 0.7 MnO 2 .

25 ENERGY STORAGE↗
DOE OSTI2024

Elucidating the Gas-Phase Behavior of Nitazene Analog Protomers Using Structures for Lossless Ion Manipulations Ion Mobility-Orbitrap Mass Spectrometry

2-benzylbenzimidazoles, or “nitazenes”, are a class of novel synthetic opioids (NSOs) that are increasingly being detected alongside fentanyl analogs and other opioids in drug overdose cases. Nitazenes can be 20x more potent than fentanyl but are not routinely tested for during postmortem or clinical toxicology drug screens; thus, their prevalence in drug overdose cases may be under-reported. Traditional analytical workflows utilizing liquid chromatography-tandem mass spectrometry (LC-MS/MS) often require additional confirmation with authentic reference standards to identify a novel nitazene. However, additional analytical measurements with ion mobility spectrometry (IMS) may provide a path towards reference-free identification, which would greatly accelerate NSO identification rates in toxicology labs. Presented here are the first IMS and collision cross section (CCS) measurements on a set of fourteen nitazene analogs using a Structures for Lossless Ion Manipulations (SLIM)-Orbitrap MS. All nitazenes exhibited two high intensity baseline-separated IMS distributions, which fentanyls and other drug and drug-like compounds also exhibit. Incorporating water into the electrospray ionization (ESI) solution caused the intensities of the higher mobility IMS distributions to increase the intensities of the lower mobility IMS distributions to decrease. Nitazenes lacking a nitro group at the R1 position exhibited the greatest shifts in signal intensities due to water. Furthermore, IMS-MS/MS experiments showed that the higher mobility IMS distributions of all nitazenes produced fragment ions with m/z 72, 100, and other low intensity fragments while the lower mobility IMS distributions only produced fragment ions with m/z 72 and 100. The IMS, solvent, and fragmentation studies provide experimental evidence that nitazenes potentially exhibit three gas-phase protomers. In conclusion, the cyclic IMS capability of SLIM was also employed to partially resolve four sets of structurally similar nitazene isomers (e.g., protonitazene/isotonitazene, butonitazene/isobutonitazene/secbutonitazene), showcasing the potential of using high-resolution IMS separations in MS-based workflows for reference-free identification of emerging nitazenes and other NSOs.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Design strategies for nonaqueous multivalent-ion and monovalent-ion battery anodes

The inability of current battery technologies to keep up with the performance requirements of industry is pushing forward developments in electrochemistry. Specifically, the battery's negative electrode, the anode, presents many unique chemical, physical and engineering challenges. Lithium-based battery technologies have dominated the past decade, but concerns about the limited supply of lithium in the Earth's crust have led researchers to look towards alternative metal-ion technologies. Furthermore, various alkali metals (such as sodium and potassium) and alkali earth metals (such as magnesium and calcium) have attracted significant research interest. In this Review, we analyse these technologies in a coherent manner, addressing the problems of each type of anode, rather than those of specific types of metal-ion batteries. Covering direct metal plating and stripping, intercalation-based, alloy-based and conversion-reaction-based anode technologies, this analysis will offer the reader a comprehensive understanding of the behaviour of different metal-ion anodes and of what can be learned by transferring knowledge between these different systems. Increasing demand for energy-storage systems will inevitably stress the Earth's lithium supply; thus, the research focus is shifting towards other alkali and alkali earth metals. In summary, this Review compares and connects strategies to enable different multivalent and monovalent metal-ion battery anodes, including metal anodes and intercalation-based, alloy-based and conversion-reaction-based anodes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Review of Swift Heavy Ion Irradiation Effects in CeO2

Cerium dioxide (CeO2) exhibits complex behavior when irradiated with swift heavy ions. Modifications to this material originate from the production of atomic-scale defects, which accumulate and induce changes to the microstructure, chemistry, and material properties. As such, characterizing its radiation response requires a wide range of complementary characterization techniques to elucidate the defect formation and stability over multiple length scales, such as X-ray and neutron scattering, optical spectroscopy, and electron microscopy. In this article, recent experimental efforts are reviewed in order to holistically assess the current understanding and knowledge gaps regarding the underlying physical mechanisms that dictate the response of CeO2 and related materials to irradiation with swift heavy ions. The recent application of novel experimental techniques has provided additional insight into the structural and chemical behavior of irradiation-induced defects, from the local, atomic-scale arrangement to the long-range structure. However, future work must carefully account for the influence of experimental conditions, with respect to both sample properties (e.g., grain size and impurity content) and ion-beam parameters (e.g., ion mass and energy), to facilitate a more direct comparison of experimental results.

42 ENGINEERING↗
DOE OSTI2024

Chemo-Mechanical Instabilities in Lithium Cobalt Oxide at Higher State-Of-Charge in Li-Ion Batteries

Transition metal oxide cathodes are widely used in commercial Li-ion batteries. However, their practical charge capacity is limited due to severe chemo-mechanical instabilities at higher charge voltage, and state-of-charge condition. Here, in situ stress and strain measurements were synchronized to probe mechanical deformations in the lithium cobalt oxide (LCO) cathode via a multi-beam stress sensor and digital image correlation, respectively. In situ mechanical measurements revealed how Li removal from the electrode structure induces deformations on the LCO composite cathodes during cycling. The structure and morphology of the LCO cathodes were further investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. Two distinct electrochemical and mechanical behaviors were identified when the LCO was charged up to 4.65 V. The LCO undergoes a compressive stress generation when charged up to 4.2 V and surface fractures on the LCO particles were detected by SEM. LCO cathode experienced significantly large contractions (negative strains) when charged up to 4.65 V, where intergranular crack formation and phase transformation were detected on the LCO particles via SEM and XRD, respectively. Overall, the study bridges complicated structural deformations with in situ analysis of mechanical degradations in LCO cathodes charged at higher voltages. The correlation is vital to understanding instability mechanisms in transition metal oxides at high voltages for alkali metal ion batteries.

higher state-of-charge↗
DOE OSTI2021

Direct Cathode Recycling of End-Of-Life Li-Ion Batteries Enabled by Redox Mediation

The ongoing surge of electric vehicle (EV) adoption forecasts an unprecedented amount of lithium-ion battery wastes in the near future. Since cathode materials have the highest economic and engineering values, it is essential to recycle and reuse the end-of-life (EOL) cathode materials. Here, we show that redox mediators can deliver lithium ions and electrons from a lithium source to the cathode, efficiently relithiate the EOL cathode materials, and make them ready for new battery production after a postheat treatment. We have found that some quinone-based redox mediators, especially 3,5-di-tert-butyl-o-benzoquinone (DTBQ), can shuttle the charges very fast between Li metal and EOL cathode. Reduction of DTBQ on lithium is evidenced by chemical changes of Li metal and DTBQ, and successful relithiation of the EOL cathode by the subsequent oxidation of DTBQ is verified by electrochemical and structural evaluations.

battery recycling↗