SEARCH · Engineering Papers

Results for “INFRARED SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Infrared absorption spectra of metal carbides, nitrides and sulfides

The infrared absorption spectra of 12 kinds of metal carbides, 11 kinds of nitrides, and 7 kinds of sulfides, a total of 30 materials, were measured and the application of the infrared spectra of these materials to analytical chemistry was discussed. The measurements were done in the frequency (wave length) range of (1400 to 400/cm (7 to 25 mu). The carbides Al4C3, B4C, the nitrides AlN, BN, Si3N4, WB, and the sulfides Al2S3, FeS2, MnS, NiS and PbS were noted to have specific absorptions in the measured region. The sensitivity of Boron nitride was especially good and could be detected at 2 to 3 micrograms in 300 mg of potassium bromide.

Kammori, O.↗

NASA NTRS1990

Collecting, analyzing and archiving of ground based infrared solar spectra obtained from several locations

The infrared solar spectrum as observed from the ground under high resolution contains thousands of absorption lines. The majority of these lines are due to compounds that are present in the Earth's atmosphere. Ground based infrared solar spectra contain information concerning the composition of the atmosphere at the time the spectra were obtained. The objective of this program is to record solar spectra from various ground locations, and to analyze and archive these spectra. The analysis consists of determining, for as many of the absorption lines as possible, the molecular species responsible for the absorption, and to verify that current models of infrared transmission match the observed spectra. Archiving is an important part of the program, since a number of the features in the spectra have not been identified. At some later time, when the features are identified, it will be possible to determine the amount of that compound that was present in the atmosphere at the time the spectrum was taken.

Murcray, David G.↗

NASA NTRS1976

Infrared emission spectra from operating elastohydrodynamic sliding contacts

Infrared emission spectra from an operating EHD sliding contact were obtained through a diamond window for an aromatic polymer solute present in equal concentration in four different fluids. Three different temperature ranges, three different loads, and three different speeds for every load were examined. Very sensitive Fourier spectrophotometric (Interferometric) techniques were employed. Band Intensities and band intensity ratios found to depend both on the operating parameters and on the fluid. Fluid film and metal surface temperatures were calculated from the spectra and their dependence on the mechanical parameters plotted. The difference between these temperatures could be plotted against shear rate on one curve for all fluids. However, at the same shear rate the difference between bulk fluid temperature and diamond window temperature was much higher for one of the fluids, a traction fluid, than for the others.

Lauer, J. L.↗

NASA NTRS1992

Effects of surficial modification processes on thermal infrared signatures in the arid southwestern United States

Thermal infrared spectra from both laboratory and remote sensing instruments were used to distinguish different age lava flows with varying amounts of surficial modification at Cima and Lunar Crater volcanic fields. The modification processes affecting the lava flows cause spectral differences that can be seen in remotely sensed emittance spectra from the thermal infrared multispectral scanner. Important influences on the thermal infrared spectra include aeolian mantling, vegetation, lave flow roughness, and rock varnish. Laboratory thermal infrared reflectance spectra of the subaerially exposed surfaces of 1-15 cm basalt fragments at Cima volcanic field show a feature attributable to rock varnish on the younger flows (0.14-0.75 m.y.) that is lacking on the older flows (greater than 0.8 m.y.). This suggests that rock varnish is thinner on the older flows at Cima volcanic field. Scanning electron microscope images and thin sections of the different age flows at Cima volcanic field support the conclusion that rock varnish is thinner and may be eroding on the older flow surfaces.

Weitz, Catherine M.↗

NASA NTRS1993

Determination of Total Ozone over Mauna Loa Using Very High Resolution Infrared Solar Spectra

A very high resolution infrared Fourier transform spectrometer has been used to record solar spectra at the Mauna Loa Observatory in Hawaii. Spectra are normally taken one day a week at sunrise. These spectra have been analyzed for ozone and N2O total columns, and the ozone column compared with the value reported by tile Mauna Loa Dobson spectrophotometer. Aside from the FTIR reporting about 5% lower values than the Dobson (which may be due to a systematic difference in the treatment of tropospheric ozone), the FTIR and Dobson agree to within 2.7% (RMS) during this period.

David, Shelle J.↗

NASA NTRS1991

Infrared reflectance spectra (4-12 micron) of lunar samples

Presented here are infrared reflectance spectra of a typical set of Apollo samples to illustrate spectral character in the mid-infrared (4 to 12 microns) of lunar materials and how the spectra varies among three main forms: soil, breccia, and igneous rocks. Reflectance data, to a close approximation, are the inverse of emission spectra; thus, for a given material the spectral reflectance (R) at any given wavelength is related to emission (E) by 1 - R equals E. Therefore, one can use reflectance spectra of lunar samples to predict how emission spectra of material on the lunar surface will appear to spectrometers on orbiting spacecraft or earthbound telescopes. Spectra were measured in the lab in dry air using a Fourier Transform Infrared spectrometer. Shown here is only the key portion (4 to 12 microns) of each spectrum relating to the principal spectral emission region for sunlit lunar materials and to where the most diagnostic spectral features occur.

Nash, Douglas B.↗

NASA NTRS1993

The Mid-Infrared Transmission Spectra of Antarctic Ureilites

The mid-infrared (4000-450 1/cm; 2.5-22.2 micron) transmission spectra of seven Antarctic ureilites and 10 Antarctic H-5 ordinary chondrites are presented. The ureilite spectra show a number of absorption bands, the strongest of which is a wide, complex feature centered near 1000 1/cm (10 micron) due to Si-O stretching vibrations in silicates. The profiles and positions of the substructure in this feature indicate that Mg-rich olivines and pyroxenes are the main silicates responsible. The relative abundances of these two minerals, as inferred from the spectra, show substantial variation from meteorite to meteorite, but generally indicate olivine is the most abundant (olivine:pyroxene = 60:40 to 95:5). Both the predominance of olivine and the variable olivine-to-pyroxene ratio are consistent with the known composition and heterogeneity of ureilites. The H-5 ordinary chondrites spanned a range of weathering classes and were used to provide a means of addressing the extent to which the ureilite spectra may have been altered by weathering processes. It was found that, while weathering of these meteorites produces some weak bands due to the formation of small amounts of carbonates and hydrates, the profile of the main silicate feature has been little affected by Antarctic exposure in the meteorites studied here. The mid-infrared ureilite spectra provide an additional means of testing potential asteroidal parent bodies for the ureilites. At present, the best candidates include the subset of S-type asteroids having low albedos and weak absorption features in the near infrared.

Sandford, Scott A.↗

NASA NTRS2000

Thermal Emission Spectra of Phobos, Vesta, Ceres, and Pallas: A Comparison

Ultraviolet, visual, and near-infrared spectra of Phobos, obtained by Mariner 9 and Viking Orbiters, were interpreted to suggest a compositional similarity with carbonaceous chrondrites. Such a composition would be inconsistent with the moon's origin in the proto-Mars region, as Mars is composed chiefly of differentiated silicates. This interpretation was used to suggest that the moons originated in the main-asteroid belt, with subsequent capture and orbital evolution into their current locations. Interpretations of more recent visual and near-infrared spectra, obtained by Phobos-2 and Mars Pathfinder, have demonstrated that the Phobos spectrum is more similar to spectra of other classes of asteroids and lunar soils. If lunar mare soil is the correct analogy, then such a composition suggests a formation of Phobos from materials similar to that on Mars, i.e. basalts, and would not require a dynamically difficult capture and orbital evolution. During the science phasing orbits of the Mars Global Surveyor mission Thermal Emission Spectrometer (TES) observations of Phobos were acquired at each of four encounters. The spectral variability observed for localized surface regions on Phobos has been previously reported and is greatest near the northern wall of Stickney crater. Interpretation of the thermal infrared spectra of airless bodies, based upon most existing laboratory measurements, is complicated by the absence of interstitial gases on the celestial objects that would act to minimize potential thermal gradients in the upper layers of the surface. As an aid to interpretation of the TES Phobos spectra are compared to telescopic and airborne thermal infrared spectra of asteroids from several classes, including Ceres (G), Pallas (B), and Vesta (V). The asteroid spectra provide a direct analogy to the physical situation encountered at the surface of Phobos, albeit different thermal gradients may exist for each surface. This work is supported by NASA RTOP's 344-30-30-01 and 344-34-21-08.

Roush, Ted↗

NASA NTRS1983

Far-infrared reflectance spectra of optical black coatings

Far-infrared specular reflectance spectra of six optically black coatings near normal incidence are presented. The spectra were obtained using nine bandpass transmission filters in the wavelength range between 12 and 300 microns. Data on the construction, thickness, and rms surface roughness of the coatings are also presented. The chemical composition of two coatings can be distinguished from that of the others by a strong absorption feature between 20 and 40 microns which is attributed to amorphous silicate material. Inverse relationships between these spectra and coating roughness and thickness are noted and lead to development of a reflecting-layer model for the measured reflectance. The model is applied to the spectra of several coatings whose construction falls within its constraints.

Smith, S. M.↗

NASA NTRS1980

Infrared reflectance spectra of asteroids - A search for water of hydration

Infrared reflectance spectra have shown the presence of an absorption feature in the 3-4 micron region for seven C and U asteroids. By comparison with laboratory spectra of terrestrial silicates and meteorites, it is concluded that this band is probably due to water in the form of hydrated salts and silicates (clay minerals), implying that the surface material of these asteroids may be analogous to the CI and CM carbonaceous chondritic meteorites. The presence of other hydrated minerals, however, cannot be ruled out. The depths of the water bands in the spectra vary from asteroid to asteroid, though no asteroid spectrum shows a band as deep as was detected on 1 Ceres. On four other C asteroids, no water band was detected. The implications of these observations for the mineralogy of these asteroids are discussed

Lebofsky, L. A.↗

NASA NTRS1996

Stratospheric Observations of CH3D and HDO from ATMOS Infrared Solar Spectra: Enrichments of Deuterium in Methane and Implications for HD

Stratospheric mixing ratios of CH3D from 100 mb to 17mb (approximately equals 15 to 28 km)and HDO from 100 mb to 10 mb (approximately equals 15 to 32 km) have been inferred from high resolution solar occultation infrared spectra from the Atmospheric Trace MOlecule Spectroscopy (ATMOS) Fourier-transform interferometer. The spectra, taken on board the Space Shuttle during the Spacelab 3 and ATLAS-1, -2, and -3 missions, extend in latitude from 70 deg S to 65 deg N. We find CH3D entering the stratosphere at an average mixing ratio of (9.9 +/- 0.8) x 10(exp -10) with a D/H ratio in methane (7.1 +/- 7.4)% less than that in Standard Mean Ocean Water (SMOW) (1 sigma combined precision and systematic error). In the mid to lower stratosphere, the average lifetime of CH3D is found to be (1.19 +/- 0.02) times that of CH4, resulting in an increasing D/H ratio in methane as air 'ages' and the methane mixing ratio decreases. We find an average of (1.0 +/- 0.1) molecules of stratospheric HDO are produced for each CH3D destroyed (1 sigma combined precision and systematic error), indicating that the rate of HDO production is approximately equal to the rate of CH3D destruction. Assuming negligible amounts of deuterium in species other than HDO, CH3D and HD, this limits the possible change in the stratospheric HD mixing ratio below about 10 mb to be +/- 0.1 molecules HD created per molecule CH3D destroyed.

Irion, F. W.↗

NASA NTRS1986

Detection of 12 micron Mg I and OH lines in stellar spectra

Infrared lines of Mg I and OH have been detected in stellar spectra near 12.3 microns. The Mg I 7i-6h transition was seen in Alpha Ori and Alpha Tau, and the R2e(23.5) and R1f(24.5) transitions of OH were seen in Alpha Ori. All lines appear in absorption, in contrast to the solar spectrum where the Mg I line shows a prominent emission core. The lack of emission in these low surface gravity stars is due to a greatly reduced volume recombination rate for the high-n states of Mg I, which is not fully compensated by the increased chromospheric scale height. The OH equivalent widths are sensitive to the temperature structure of the upper photosphere of Alpha Ori, and they indicate that the photosphere near tau 5000 of about 10 to the -5th is approximately 100 K hotter than is given by flux constant models. The OH measurements agree more closely with the 1981 semiemprical model of Basri, Linsky, and Eriksson (1981), which is based on Ca II and Mg II ultraviolet features.

Jennings, D. E.↗

DOE OSTI2022

Infrared Absorption Spectra of H2SO4, SO3, SO2, and H2O at 300C and 350C

Mid infrared absorption spectra of sulfuric acid (H2SO4), sulfur trioxide (SO3), sulfur dioxide (SO2), and water (H2O) were collected in a high temperature gas cell operating at either 300C or 350C. The spectra were collected using tunable external cavity quantum cascade lasers (ECQCLs) tuning, which were capable of operating over the wavelength range from approximately 7 microns to 9 microns, where H2SO4 and SO3 have their strongest absorption features. The spectra can be used as a library for developing gas sensors.

infrared absorption↗

NASA NTRS1983

Laboratory studies at high resolution of the infrared absorption spectra of a number of gases found in planetary atmospheres

The infrared absorption spectra of a number of gases found in planetary atmospheres were studied at high resolution. Absorption line measurements which can be of value for the interpretation of planetary spectra in terms of molecular abundances and conditions in the planetary atmospheres were provided. The high resolution spectra have yielded measurements of individual vibration rotation line parameters including positions, strengths, pressure broadened widths and, where assignments were unknown, the temperature sensitivity of the strengths. Such information allows the determinations of the absorption of a given molecular gas under planetary conditions of temperature and pressure and at the same time it provides the data necessary if the spectra are to be understood in terms of basic molecular theory. Thus this work has included spectral analysis in the form of line assignments as well as fitting of the data to Hamiltonian models. Such fitting is very useful in that it helps to confirm and extend the assignments.

Hunt, R. H.↗

NASA NTRS1986

Quantification of HCl from high-resolution, ground-based, infrared solar spectra in the 3000 per cm region

Recent ground-based infrared solar spectra at 0.02 per cm resolution in the 3000 per cm region have been analyzed for the atmospheric content of HCl. Nonlinear spectral least-squares fitting applied to spectra obtained at several zenith angles shows little sensitivity of the results to tropospheric HCl but provides an accurate measurement of the total column amount.

Goldman, A.↗

DOE OSTI2024

Comparison of effects from gamma, e-beam and X-ray radiation on multilayer polymer films used in biopharmaceutical devices by chemometric treatment of spectroscopic data

The present study investigated the effects of gamma-ray, electron beam, and X-ray radiation on polymers in EVA/EVOH/EVA multilayer films. Spectroscopic methods, including FTIR and UV–Vis, were employed in conjunction with chemometric treatments such as PCA, SIMPLISMA treatments, and PLS models. The feasibility of dose prediction on multilayer film, given a known dose, is attainable across various irradiation technologies. Both gamma ray and X-ray exhibit comparable effects on the multilayer film, and it is feasible to anticipate the dose released on the film by utilizing UV–Vis spectra or infrared spectra for gamma ray or X-ray of a predetermined dose.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NASA NTRS2010

TPSAS-NF1676L-10761-DND

The presentation summarizes the NASA CLARREO mission to observe decadal climate change using high accuracy SI traceable reflected solar spectra, infrared emission spectra, and radio occultation from the Earth.

Bruce A Wielicki↗

NASA NTRS1987

Quantification of HCl from High Resolution Infrared Solar Spectra Obtained at the South Pole in December 1986

Ground-based infrared solar spectra at 0.02/ cm resolution obtained at the Amundsen-Scott South Pole station in December 1986 have been analysed for the atmospheric content of HCl. Nonlinear least-squares spectral fitting applied to the spectra yields a total HCl column amount of (6.4 +/- 0.8) x 10(exp 15) molec/sq cm, most being stratospheric. This amount is larger than that extrapolated from earlier results on the latitudinal distribution of atmospheric HCl.

Goldman, A.↗