Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “II&C”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Minimizing Cr-Evaporation from Balance Of Plant Components By Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al 2 O 3 -forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Minimizing Cr-Evaporation from Balance of Plant Components by Utilizing Cost-Effective Alumina-Forming Austenitic Steels

A solid oxide fuel cell (SOFC) is a clean and efficient energy conversion device. The development of intermediate-temperature SOFCs has made it preferable to use metallic interconnects (MICs) to greatly reduce the cost and significantly increase the efficiency compared to ceramic interconnect materials. However, gaseous chromium species will evaporate from the chromium-containing layer formed on the surface of commonly used MICs and balance of plant (BoP) components. Volatile chromium species have been shown to form solid deposits which poison the cathodes of SOFCs, causing drastic cell performance degradation and thereby limiting commercialization. In order to alleviate the Cr poisoning and achieve long-term high performance of SOFC stacks, various Al2O3-forming austenitic (AFA) stainless steels applied at different temperatures are evaluated in this project. Based on our Phase I results (500 h operation), it is shown that on the AFAs, an alumina-based protective layer forms under high temperature that is invulnerable to water vapor effects and suppresses the diffusion of chromium and manganese which can prevent the generation of spinels on the alloy surface. Therefore, 310S, OC4 and OC5 at 800 °C and 625, OC11 and OC11LZ at 900 °C are selected to be tested in the Phase II long-term operation. From the results, we find that besides the lower Cr evaporation rates and better oxidation resistance of AFAs than benchmark alloys after short-term (500 h) operation, AFAs also possess the sturdy and compact alumina layer after a long-term operation (5000 h). A protective oxide layer is of great importance for the long-term high-temperature operation of structural materials. The high-temperature oxidation behavior of AFAs and commercial 310S and 625 alloys in Air + 10% H 2 O at 800 °C and 900 °C is systematically investigated. Severe breakaway oxidation and minor spallation are observed for the 310S and 625 after the long-term operation, while the AFAs show high oxidation resistance. It is found that the formation of a continuous alumina layer could greatly prevent the volatilization of chromium vapors. In addition, the corresponding evolving models are discussed. Chromium evaporation from BoP components in high-temperature environment could severely deteriorate the electrochemical performance of SOFC. Several methods were applied to evaluate the Cr evaporation rates of BoP after 500 h exposure at 800 °C to 900 °C in air with 10% H 2 O. An optimal method was designed to exclude the effect of silicon (Si) deposits from quartz tube and sodium (Na) deposits from the sodium carbonate on the oxidation process and the chemical interaction between Cr gaseous species and alumina tube which could provide further quantitative correlation of the evaporated Cr species quantities and degradation rates of SOFC. Based on the great performance of AFAs after long-term operation, AFAs are assembled with Anode-supported cells (ASC) to investigate the the Cr deposition of anode-supported cell under a constant current density of 0.5 A cm -2 at 800 °C with AFA alloys compared with commercial alloys. In addition, the anodic and cathodic processes are deconvoluted by distribution of relaxation times (DRT) method which are comprehensively discussed. It is found out that the voltage exhibited a slight decrease of 5.09 % and 1.54 % in the presence of OC11 and OC11LZA alloy, respectively. However, a considerable decrease of 22.14 % and 12.06 % was determined in the presence of 310S and 625 alloy, respectively. AFAs possessing the low-cost, low Cr evaporation rates and the high oxidation resistance will make it of great potential to replace the existing BoP components.

36 MATERIALS SCIENCE↗
DOE OSTI2021

New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na 2 WO 4 /SiO 2 Catalysts

Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.

Sourav, Sagar↗
DOE OSTI2021

New Mechanistic and Reaction Pathway Insights for Oxidative Coupling of Methane (OCM) over Supported Na 2 WO 4 /SiO 2 Catalysts

Abstract The complex structure of the catalytic active phase, and surface‐gas reaction networks have hindered understanding of the oxidative coupling of methane (OCM) reaction mechanism by supported Na 2 WO 4 /SiO 2 catalysts. The present study demonstrates, with the aid of in situ Raman spectroscopy and chemical probe (H 2 ‐TPR, TAP and steady‐state kinetics) experiments, that the long speculated crystalline Na 2 WO 4 active phase is unstable and melts under OCM reaction conditions, partially transforming to thermally stable surface Na‐WO x sites. Kinetic analysis via temporal analysis of products (TAP) and steady‐state OCM reaction studies demonstrate that ( i ) surface Na‐WO x sites are responsible for selectively activating CH 4 to C 2 H x and over‐oxidizing CH y to CO and ( ii ) molten Na 2 WO 4 phase is mainly responsible for over‐oxidation of CH 4 to CO 2 and also assists in oxidative dehydrogenation of C 2 H 6 to C 2 H 4 . These new insights reveal the nature of catalytic active sites and resolve the OCM reaction mechanism over supported Na 2 WO 4 /SiO 2 catalysts.

Sourav, Sagar↗
DOE OSTI2023

Statistical analysis of Al III and C III ] emission lines as virial black hole mass estimators in quasars

We test the usefulness of the intermediate ionisation lines Al IIIλ1860 and C III]λ1909 as reliable virial mass estimators for quasars. We identified a sample of 309 quasars from the Sloan Digital Sky Survey Data Release 16 (SDSS DR16) in the redshift range 1.2 ≤ z ≤ 1.4 that have [O II]λ3728 recorded on the same spectrum as Al IIIλ1860, Si III]λ1892, and C III]λ1909. We set the systemic quasar redshift using careful measurements of [O II]λ3728. We then classified the sources as Population A (Pop. A), extreme Population A (Pop. xA), and Population B (Pop. B), and analysed the 1900 Å blend using multi-component models to look for systematic line shifts of Al IIIλ1860 and C III]λ1909 along the quasar main sequence. We do not find significant shifts of the Al IIIλ1860 line peak in Pop. B or in the vast majority of Pop. A. For Pop. xA, a small median blueshift of -250 km s -1 was observed, motivating a decomposition of the Al III line profile into a virialised component centred at rest frame and a blueshifted component for an outflow emission. For Pop. B objects, we proved the empirical necessity to fit a redshifted very broad component, clearly seen in C III], and analysed the physical implications on a Pop. B composite spectrum using CLOUDY simulations. We find consistent black hole mass estimations using Al III and C III] as virial estimators for the bulk of Pop. A. Al III (and even C III]) is a reliable virial black hole mass estimator for Pop. A and Pop. B objects. The Pop. xA sources deserve special attention due to the significant blueshifted excess observed in the line profile of Al III, although it is not as large as the excess observed in C IVλ1549.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Pd III Sulfate Dimer Initiates Rapid Methane Monofunctionalization by H Atom Abstraction

An electrogenerated Pd III 2 species in fuming sulfuric acid is competent for rapid and concurrent methane monohydroxylation to methyl bisulfate (CH 3 OSO 3 H) and methane sulfonation to methanesulfonic acid (CH 3 SO 3 H). In situ NMR at 50 °C is used to track methane transformation exclusively to CH 3 OSO 3 H and CH 3 SO 3 H at high conversions. Integrating a set of kinetic and computational studies, the mechanism of methane monofunctionalization by Pd III 2 is examined. Here, experimental rate laws and common kinetic isotope effects for CH 3 OSO 3 H and CH 3 SO 3 H formation suggest that both transformations proceed via a common rate-limiting C-H activation step. Introduction of O 2 or Pd II,III 2 suppresses CH 3 SO 3 H generation, indicating a radical chain sequence. Although the metal-metal bonded Pd III 2 complex is a net two-electron oxidant, our aggregate kinetic data point to a mechanistic model that features rate-limiting H atom abstraction by the Pd III 2 complex to generate a methyl radical intermediate. The CH 3 • intermediate then recombines with Pd II,III 2 to furnish a CH 3 Pd III 2 intermediate that reductively eliminates CH 3 OSO 3 H. Alternatively, the CH 3 intermediate can enter a chain reaction with SO 3 to generate CH 3 SO 3 H. DFT computations support the radical-based C-H activation by Pd III 2 and delineate H atom abstraction pathways with computed reaction barriers and kinetic isotope effects (KIEs) that are consistent with experimental data. These mechanistic investigations challenge the paradigm of electrophilic C-H activation and highlight H atom abstraction as a potent pathway for selective methane C-H oxidative functionalization at high reaction rates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Bioinspired Cu(II) Defect Sites in ZIF-8 for Selective Methane Oxidation

Activating the C–H bonds of alkanes without further oxidation to more thermodynamically stable products, CO and CO 2 , is a long-sought goal of catalytic chemistry. Here, inspired by the monocopper active site of methane monooxygenase, we synthesized a Cu-doped ZIF-8 metal–organic framework with 25% Cu and 75% Zn in the nodes and activated it by heating to 200 °C and dosing in a stepwise fashion with O 2 , methane, and steam. We found that it does oxidize methane to methanol and formaldehyde. The catalysis persists through at least five cycles, and beyond the third cycle, the selectivity improves to the extent that no CO 2 can be detected. Experimental characterization and analysis were carried out by PXRD, DRUV–vis, SEM, and XAS (XANES and EXAFS). The reaction is postulated to proceed at open-coordination copper sites generated by defects, and the mechanism of methanol production was explicated by density functional calculations with the revMO6-L exchange–correlation functional. The calculations reveal a catalytic cycle of oxygen-activated Cu I involving the conversion of two molecules of CH 4 to two molecules of CH 3 OH by a sequence of hydrogen atom transfer reactions and rebound steps. For most steps in the cycle, the reaction is more favored by singlet species than by triplets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Photodepositing CdS on the Active Cyano Groups Decorated g‐C 3 N 4 in Z‐Scheme Manner Promotes Visible‐Light‐Driven Hydrogen Evolution

Abstract g‐C 3 N 4 /CdS heterojunctions are potential photocatalysts for hydrogen production but their traditional type‐II configuration generally leads to weak oxidative and reductive activity. How to construct the novel Z‐scheme g‐C 3 N 4 /CdS counterparts to address this issue remains a great challenge in this field. In this work, a new direct Z‐scheme heterojunction of defective g‐C 3 N 4 /CdS is designed by introducing cyano groups (NC‐) as the active bridge sites. Experimental observations in combination with density functional theory (DFT) calculations reveal that the unique electron‐withdrawing feature of cyano groups in the defective g‐C 3 N 4 /CdS heterostructure can endow this photocatalyst with numerous advantageous properties including high light absorption ability, strong redox performance, satisfactory charge separation efficiency, and long lifetime of charge carriers. Consequently, the resultant photocatalytic system exhibits more active performance than CdS and g‐C 3 N 4 under visible light and reaches an excellent hydrogen evolution rate of 1809.07 µmol h −1 g −1 , which is 6.09 times higher than pristine g‐C 3 N 4 . Moreover, the defective g‐C 3 N 4 /CdS photocatalyst maintains good stability after 40 h continuous test. This work provides new insights into design and construction of Z‐scheme heterojunctions for regulating the visible‐light‐induced photocatalytic activity for H 2 evolution.

Wang, Zhipeng↗
DOE OSTI2021

Type-II Dirac cones and electron-phonon interaction in monolayer biphenylene from first-principles calculations

In this work, we report a first-principles investigation of electronic structure, topological bands, and electron-phonon interactions in metallic biphenylene sheets. Biphenylene is a recently synthesized sp 2 -bonded carbon allotrope. We find coupling of electrons at the Fermi surface to very high frequency carbon-derived phonons, analogous to superconducting MgB 2 . This leads to low-temperature weak coupling superconductivity due to an unusual combination of exceptionally large logarithmically averaged phonon frequency ω log =1369 K and moderate electron-phonon coupling. The electronic structure shows a two-band Fermi surface dominated by C p z orbitals and a pair of type-II tilted Dirac cones along the Γ-Y line at the Brillouin zone boundary. Berry curvature and edge-state calculations show that monolayer biphenylene is a two-dimensional $\mathbb{Z}$ 2 topological material. Thus, monolayer biphenylene is predicted to be a topological superconductor based on C p orbitals and high-frequency phonons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Ground state rotational and kinetic temperatures of C 2 molecules in a laser-produced plasma

This study presents an experimental comparison between rotational and kinetic temperatures of molecular species in a laser-produced plasma, utilizing tunable laser absorption spectroscopy. We analyzed high-resolution and time-resolved absorption spectra of 31 rotational transitions within the Phillips A 1 II u –X 1 Σ g 3-0 band of the C 2 molecule, measured from a laser-produced graphite plasma in ~2 Torr argon, within the 771–781 nm spectral range. Spectral fitting provided quantitative state column densities of C 2 rotational energy levels in the ground electronic and vibrational states. Boltzmann analysis revealed thermalized rotational distributions showing rotational temperatures decreasing from 3000 to 600 K within 5–500 μs following the onset of the laser plasma. The measured kinetic and rotational temperatures of C 2 molecules are comparable, suggesting that collisional processes in the laser-produced plasma are sufficient to maintain thermal equilibrium between the C 2 molecules and the Ar background gas.

Absorption spectroscopy↗
DOE OSTI2025

Late-Stage Oxidation of C( sp 3 )─H Bonds with High Efficiency and Alkyl Group Dihydroxylation of Complex Molecules

Here, the late-stage oxidation of C(sp 3 )─H bonds is highly valuable for modulating the solubility and binding of bioactive compounds and for diversification of complex molecules. Undirected methods for C(sp 3 )─H oxidation are valuable for the installation of hydroxyl groups at sites remote from other functional groups present in the molecule, but existing catalysts are limited by low turnover numbers and lengthy ligand syntheses. Perfluorinated ruthenium porphyrins are highly active catalysts for the oxidation of alkyl C─H bonds, but the scope of the transformation with complex molecules under conditions of limiting substrate has not been investigated. We report that carbonylruthenium(II) tetrakis(pentafluorophenyl)porphyrin [Ru(TPFPP)(CO)] catalyzes the selective oxidation of tertiary C(sp 3 )─H bonds in a broad range of complex natural products and drugs, with turnover numbers as high as 1000, and the tolerance of the reaction to various functional groups was rapidly assessed by performing a model reaction in the presence of additives. We show how the combination of this undirected C(sp 3 )─H oxidation and a directed C(sp 3 )─H silylation and oxidation provides rapid access to highly oxidized, 1,2-diol derivatives of natural products by a formal dihydroxylation of an alkyl group.

Alcohols↗
DOE OSTI2021

Ion irradiation induced strain and structural changes in LiTaO 3 perovskite

LiTaO 3 crystals irradiated with 3 MeV and 1.162 GeV Au ions were studied by single crystal x-ray diffraction and Raman scattering measurements. The maximum lattice strains after 3 MeV Au ion irradiation to a fluence of 1.2 × 10 13 cm -2 were 1.2% and 0.6% along the c- and a-/b-axes, respectively. Two effects were observed in 1.162 GeV Au ion irradiated samples: (i) the (0006) and (1120) Bragg peaks were split into doublets, which suggested a subtle structural change due to slight modification of chemical composition; and (ii) the pre-damaged 1.2% lattice strain along the c-axis was relaxed to 0.9% after subsequent irradiation with 1.162 GeV Au ions, while relaxation along the a- or b-axis was not obvious. A distinct change in the Raman spectrum of the <0001> oriented LiTaO 3 crystals was observed after 1.162 GeV Au ion irradiation, but no obvious change was observed in the <1120> oriented samples or in 3 MeV Au ion irradiated samples. Strain and structural changes in crystalline LiTaO3, with or without pre-existing defects, upon ion irradiation are delineated in its responding to inelastic ionization and elastic nuclear collisions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Measurement of isosteric heat of gas adsorption and Brunauer–Emmett–Teller (BET) surface area using a quartz crystal microbalance

The study of gas adsorption on a solid surface evaluates the affinity between sorbate gas and sorbent substrate and factors that contribute to this. This report presents a test platform for adsorption experiments of various gases on various solid surfaces. Controlled environmental conditions enable investigations in materials surface science and increase the consistency among adsorption data. The system utilizes a quartz crystal microbalance to perform gravimetric analysis of deposition and adsorption, enabling investigation of the interaction of gaseous molecules with solid surfaces. In this study, a quartz crystal microbalance as gas adsorption detector was integrated with an environmental chamber to create a versatile tool for gas adsorption experiments on thin films. Experimental operation of this apparatus was demonstrated via acquisition of the adsorption isotherms of cyclohexane vapor on a gold surface at 55 and 70 °C. The result indicated International Union of Pure and Applied Chemistry Type II adsorption. Consequentially, application of the Brunauer–Emmett–Teller model to the isotherm data subject to predefined criteria for linear region selection yielded a surface area of the sorbent of 0.53 cm2 at 55 °C. From the monolayer region of the isotherms, the isosteric heat of adsorption of the cyclohexane vapor on gold was calculated to be 37 kJ mol-1.

47 OTHER INSTRUMENTATION↗