Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOTELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Influences of elevated thermal decomposition of ammonia gas on indium nitride grown by sol–gel spin coating method

Highlights: • A study on indium nitride growth via sol-gel spin coating and nitridation. • Thermal decomposition effects of ammonia gas on films properties are investigated. • Chemical processes describing InN crystal growth are revealed. • Thermal etching effect and metallic indium are observed at increasing temperature. • New insights in synthesizing InN thin films with a simple and low cost method. - Abstract: Indium nitride (InN) thin films grown on aluminum nitride on p-type silicon (111) [AlN/p-Si(111)] substrates are prepared via sol–gel spin coating method followed by nitridation. The thermal decomposition effects of ammonia (NH{sub 3}) gas on the structural properties and surface morphologies of the deposited films are investigated. X-ray diffraction results reveal that the crystalline quality of InN degrades markedly as thermal decomposition of NH{sub 3} gas increases from 700 to 850 °C, at which indium oxide (In{sub 2}O{sub 3}) forms in the deposited films. The thermal etching effect and formation of indium droplet on the film are observed at 850 °C. These findings are consistent with those of elementary and cross-sectional analysis obtained through energy dispersive spectroscopy and field-emission scanning electron microscopy. The findings deduced that InN thin films with densely packed grains can be grown at NH{sub 3} decomposition temperature of 700 °C.

36 MATERIALS SCIENCE↗

Single-Neutron States in {sup 101}Sn

A search for {gamma}-ray transitions in {sup 101}Sn, which contains only one neutron outside the {sup 100}Sn core, was carried out at the Argonne Tandem-Linac Accelerator System. {sup 101}Sn nuclei were produced using the {sup 46}Ti({sup 58}Ni,3n){sup 101}Sn reaction. In-beam {gamma} rays were detected in the Gammasphere Ge-detector array and were correlated with {sup 101}Sn {beta}-delayed protons using the Recoil-Decay Tagging method. A {gamma}-ray line at 172 keV was assigned to {sup 101}Sn and was interpreted as the transition between the single-neutron g{sub 7/2} and d{sub 5/2} states. The measured {nu}g{sub 7/2}-{nu} d5/2 energy splitting is compared with predictions of various mean-field potentials. It is also used to calculate multi-neutron configurations in light Sn isotopes. Prospects of using {beta}-delayed protons for tagging other exotic nuclei in the {sup 100}Sn region are discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An analytical model for pulse shape and electrothermal stability in two-body transition-edge sensor microcalorimeters

High-resolution superconducting gamma-ray sensors show potential for the more accurate analysis of nuclear material. These devices are part of a larger class of microcalorimeters and bolometers based on transition edge sensors (TESs) that have two distinct thermal bodies. We derive the time domain behavior of the current and temperature for compound TES devices in the small signal limit and demonstrate the utility of these equations for device design and characterization. In particular, we use the model to fit pulses from our gamma-ray microcalorimeters and demonstrate how critical damping and electrothermal stability can be predicted.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Vacancy-type defects in In{sub x}Ga{sub 1−x}N grown on GaN templates probed using monoenergetic positron beams

Native defects in In{sub x}Ga{sub 1−x}N layers grown by metalorganic chemical vapor deposition were studied using monoenergetic positron beams. Measurements of Doppler broadening spectra of the annihilation radiation and lifetime spectra of positrons for a 200-nm-thick In{sub 0.13}Ga{sub 0.87}N layer showed that vacancy-type defects were introduced by InN alloying, and the major species of such defects was identified as complexes between a cation vacancy and nitrogen vacancies. The presence of the defects correlated with lattice relaxation of the In{sub 0.13}Ga{sub 0.87}N layer and the increase in photon emissions from donor-acceptor-pair recombination. The species of native defects in In{sub 0.06}Ga{sub 0.94}N layers was the same but its concentration was decreased by decreasing the InN composition. With the layer thickness increased from 120 nm to 360 nm, a defect-rich region was introduced in the subsurface region (<160 nm), which can be associated with layer growth with the relaxation of compressive stress.

36 MATERIALS SCIENCE↗

Self-screening of the quantum confined Stark effect by the polarization induced bulk charges in the quantum barriers

InGaN/GaN light-emitting diodes (LEDs) grown along the polar orientations significantly suffer from the quantum confined Stark effect (QCSE) caused by the strong polarization induced electric field in the quantum wells, which is a fundamental problem intrinsic to the III-nitrides. Here, we show that the QCSE is self-screened by the polarization induced bulk charges enabled by designing quantum barriers. The InN composition of the InGaN quantum barrier graded along the growth orientation opportunely generates the polarization induced bulk charges in the quantum barrier, which well compensate the polarization induced interface charges, thus avoiding the electric field in the quantum wells. Consequently, the optical output power and the external quantum efficiency are substantially improved for the LEDs. The ability to self-screen the QCSE using polarization induced bulk charges opens up new possibilities for device engineering of III-nitrides not only in LEDs but also in other optoelectronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure of {sup 65,67}Co studied through the {beta} decay of {sup 65,67}Fe and a deep-inelastic reaction

The neutron-rich isotopes {sup 65,67}Fe and {sup 65}Co have been produced at the LISOL facility, Louvain-La-Neuve, in the proton-induced fission of {sup 238}U. Beams of these isotopes have been extracted with high selectivity by means of resonant laser ionization combined with mass separation. Yrast and near-yrast levels of {sup 65}Co have also been populated in the {sup 64}Ni+{sup 238}U reaction at Argonne National Laboratory. The level structure of {sup 65}Co could be investigated by combining all the information from both the {sup 65}Fe and {sup 65}Co{beta} decay and the deep-inelastic reaction. The {sup 65}Fe, {sup 65}Co, and {sup 67}Fe decay schemes and the {sup 65}Co yrast structure are fully established. The {sup 65,67}Co level structures can be interpreted as resulting from the coexistence of core-coupled states with levels based on a low-energy proton-intruder configuration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Resonant raman scattering and dispersion of polar optical and acoustic phonons in hexagonal inn

It is shown that a study of the dependence of impurity-related resonant first-order Raman scattering on the frequency of excitation light makes it possible to observe the dispersion of polar optical and acoustic branches of vibrational spectrum in hexagonal InN within a wide range of wave vectors. It is established that the wave vectors of excited phonons are uniquely related to the energy of excitation photon. Frequencies of longitudinal optical phonons E{sub 1}(LO) and A{sub 1}(LO) in hexagonal InN were measured in the range of excitation-photon energies from 2.81 to 1.17 eV and the frequencies of longitudinal acoustic phonons were measured in the range 2.81-1.83 eV of excitation-photon energies. The obtained dependences made it possible to extrapolate the dispersion of phonons A{sub 1}(LO) and E{sub 1}(LO) to as far as the point {Gamma} in the Brillouin zone and estimate the center-band energies of these phonons (these energies have not been uniquely determined so far).

36 MATERIALS SCIENCE↗

Specific features of the photoexcitation spectra of epitaxial InN layers grown by molecular-beam epitaxy with the plasma activation of nitrogen

The results of studies of the photoexcitation spectra of epitaxial InN layers formed by molecular-beam epitaxy with the plasma activation of nitrogen are reported. The concentration of free charge carriers in the layers is 10{sup 18}–10{sup 19} cm{sup –3}. The photoconductivity, photoluminescence, and absorption spectra exhibit a shift of the long-wavelength threshold of interband transitions in accordance with the Burstein–Moss effect for n-InN with different concentrations of equilibrium electrons. In the samples, absolute negative photoconductivity with a nanosecond relaxation time is observed. The results of photoelectric, absorption, and luminescence spectroscopy experiments are correlated with the technological parameters and electron microscopy data.

36 MATERIALS SCIENCE↗

Measurements Conducted on an Unknown Object Labeled Pu-239

Measurements were carried out on 12 November 2013 to determine whether Pu-239 was present on an object discovered in a plastic bag with label “Pu-­239 6 uCi.” Following initial survey measurements to verify that the object was not leaking or contaminated, spectra were collected with a High Purity Germanium (HPGe) detector with object positioned in two different configurations. Analysis of the spectra did not yield any direct evidence of Pu-­239. From the measured spectra, minimum detectable activity (MDA) was determined to be approximately 2 uCi for the gamma-­ray measurements. Although there was no direct evidence of Pu-239, a peak at 60 keV characteristic of Am-­241 decay was observed. Since it is very likely that Am-­241 would be present in aged plutonium samples, this was interpreted as indirect evidence for the presence of plutonium on the object. Analysis of this peak led to an estimated Pu-­239 activity of 0.02–0.04 uCi, or <1x10 -6 grams.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Idling Reduction for Long-Haul Trucks: An Economic Comparison of On-Board and Wayside Technologies

Reducing the idling of long-haul heavy-duty trucks has long been recognized as a particularly low-hanging fruit of fuel efficiency and emissions reduction. The displacement of about 10 hours of diesel idling every day, for most days of the year, for as many as a million long-haul trucks has very clear benefits. This report considers the costs and return on investment (ROI) for idling reduction (IR) equipment for both truck owners and electrified parking space (EPS) equipment owners. For the truck owners, the key variables examined are idling hours to be displaced (generally 1,000 to 2,000 hours per year) and the price of fuel ($0 to $5/gal). The ideal IR option would provide complete services in varied climates in any location and offer the best ROI on trucks that log many idling hours. For trucks that have fewer idling hours, options with a fixed cost per hour (i.e., EPS) might be most attractive if they were available to all, or even most, truck drivers. EPS, however, is particularly cost effective for trucks on prescribed routes with a need for regular, extended stops at terminals. (EPS is also called truck stop electrification, or TSE.) The analysis shows that all IR options save money when fuel costs more than $2/gal. For trucks requiring bunk heat, a simple heater (plug-in or diesel) is almost always the most costeffective way to provide heat, even if the truck is equipped with an auxiliary power unit (APU) or is parked at a single-system EPS location. For trucks requiring bunk air-conditioning, the use of single-system EPS is most cost effective for those logging fewer idling hours. Even for trucks with higher idling hours, the cost of EPS may be about the same as that for on-board air-conditioning. Clearly, trucks’ locations and seasonal factors—and the availability of EPS— are significant in the choice of “best fit” IR equipment for truck owners. This report also considers costs and payback for owners of EPS infrastructure. An industry that 5 years ago had at least five players has been narrowed to two companies—one in single-system EPS (IdleAir) and the other in dual-system EPS (Shorepower Technologies). Use of EPS by truck drivers has not met initial expectations for a variety of reasons. One area where EPS has particular promise, however, is in the cost-effective provision of reliable air-conditioning. This analysis is focused strictly on cost and fuel savings; it does not consider the important benefits of reduced emissions (i.e., greenhouse gases and criteria pollutants). It is important to note that all IR options provide some emissions benefits. Even where an IR option may not have a rapid ROI, the emissions-reduction benefit may be considerable. Finally, as the U.S. Environmental Protection Agency (EPA) and the U.S. Department of Transportation’s National Highway Traffic Safety Administration (NHTSA) set stricter standards to reduce greenhouse gas emissions and improve the fuel efficiency of medium- and heavy-duty vehicles, the emissions benefits of IR strategies will become increasingly important.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗