Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Thiophene Rings Improve the Device Performance of Conjugated Polymers in Polymer Solar Cells with Thick Active Layers

Abstract Developing novel materials that tolerate thickness variations of the active layer is critical to further enhance the efficiency of polymer solar cells and enable large‐scale manufacturing. Presently, only a few polymers afford high efficiencies at active layer thickness exceeding 200 nm and molecular design guidelines for developing successful materials are lacking. It is thus highly desirable to identify structural factors that determine the performance of semiconducting conjugated polymers in thick‐film polymer solar cells. Here, it is demonstrated that thiophene rings, introduced in the backbone of alternating donor–acceptor type conjugated polymers, enhance the fill factor and overall efficiency for thick (>200 nm) solar cells. For a series of fluorinated semiconducting polymers derived from electron‐rich benzo[1,2‐ b :4,5‐ b′ ]dithiophene units and electron‐deficient 5,6‐difluorobenzo[2,1,3]thiazole units a steady increase of the fill factor and power conversion efficiency is found when introducing thiophene rings between the donor and acceptor units. The increased performance is a synergistic result of an enhanced hole mobility and a suppressed bimolecular charge recombination, which is attributed to more favorable polymer chain packing and finer phase separation.

Duan, Chunhui↗

Toward High Efficiency Polymer Solar Cells: Rearranging the Backbone Units into a Readily Accessible Random Tetrapolymer

Abstract Two donor–acceptor (D–A) conjugated polymers composed of the same ratio of 5‐fluorobenzothiadiazole and thiophene subunits are synthesized through different routes, providing a precisely regioregular ( 2TRR ) and a random ( 2TRA ) polymer structures. Detailed structural analyses indicate that the backbone of regioregular 2TRR has only one donor segment of bithiophene, while the backbone of random 2TRA consists of three different donor segments: thiophene, bithiophene, and terthiophene (in a ratio of 0.16:0.68:0.16). Synergetic contributions from these segments allow the “tetrapolymer” 2TRA to achieve more favorable film morphology and a higher hole‐mobility relative to 2TRR . Consequently, the random polymer 2TRA achieves a substantially higher power conversion efficiency (8.8%) than the regioregular polymer 2TRR (5.1%). Notably, the “tetrapolymer” 2TRA is readily synthesized from two monomers, rather than through complex conventional preparation required for similar multipolymers. These findings provide a novel route toward the design and synthesis of multipolymeric materials and demonstrate their potential advantages in high‐performance organic electronic applications.

Zhou, Cheng↗

Tackling P3HT:Y‐Series Miscibility Through Advanced Processing for Tunable Aggregation

Abstract Polymer and small molecule blend thin films are of strong interest for organic electronics and particularly organic solar cells. The high miscibility in blends of ordinary P3HT and state‐of‐the‐art Y‐series non‐fullerene acceptors (NFAs) suppresses phase separation and aggregation challenging successful charge separation and transport. In a recent work, current‐induced doping (CID) is introduced, a method to precisely control the aggregation of Poly(3‐hexylthiophene) (P3HT) in solution. The highly ordered pre‐aggregation in solution is used here to control the P3HT aggregation in neat films and blends with Y12 (BTP‐4F‐12). This results in a 25‐fold increase in hole mobility in P3HT organic field‐effect transistor (OFET) devices and tunability of the P3HT aggregate quality in the presence of Y12 over large ranges. At the same time, particularly the Y12 long‐range ordering is heavily suppressed by increasing P3HT aggregation. However, solvent vapor annealing (SVA) leads to an extraordinarily high Y12 ordering, changes in the crystal orientation of Y12, and a further improvement of P3HT aggregation. A broad range of different degrees of aggregation of both materials can therefore be obtained in the final thin films solely by changing processing parameters without changing the composition of the material system.

Chemistry↗

Molten Salts-Driven Discovery of a Polar Mixed-Anion 3D Framework at the Nanoscale: Zn 4 Si 2 O 7 Cl 2 , Charge Transport and Photoelectrocatalytic Water Splitting

Mixed-anion compounds widen the chemical space of attainable materials compared to single anionic compounds, but the exploration of their structural diversity is limited by common synthetic paths. Especially, oxychlorides rely mainly on layered structures, which suffer from low stability during photo(electro)catalytic processes. Herein we report a strategy to design a new polar 3D tetrahedral framework with composition Zn 4 Si 2 O 7 Cl 2 . We use a molten salt medium to enable low temperature crystallization of nanowires of this new compound, by relying on tetrahedral building units present in the melt to build the connectivity of the oxychloride. These units are combined with silicon-based connectors from a non-oxidic Zintl phase to enable precise tuning of the oxygen content. This structure brings high chemical and thermal stability, as well as strongly anisotropic hole mobility along the polar axis. These features, associated with the ability to adjust the transport properties by doping, enable to tune water splitting properties for photoelectrocatalytic H 2 evolution and water oxidation. This work then paves the way to a new family of mixed-anion solids

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterizing Electric Field Exposed P3HT Thin Films Using Polarized-Light Spectroscopies

P3HT (poly (3-hexylthiophene)) has been widely used as a donor in the active layer in organic photovoltaic devices. Although moderately high-power conversion efficiencies have been achieved with P3HT-based devices, structural details, such as the orientation of polymer units and the extent of H- and J-aggregation are not yet fully understood; and different measures have been taken to control the ordering in the material. One such measure, which we have exploited, is to apply an electric field from a Van de Graaff generator. We used fluorescence (to measure anisotropy instead of polarization, which is more commonly measured) and Raman spectroscopy to characterize the order of P3HT molecules in thin films resulting from the field. We determine preferential orientations of the units in a thin film, consistent with observed hole mobility in thin-film-transistors, and observe that the apparent H-coupling strength changes when the films are exposed to oriented electrical fields during drying.

36 MATERIALS SCIENCE↗

Minimization of the auxiliary reagent loading for direct arylation polymerization (DArP) of 2‐bromo‐3‐hexylthiophene

ABSTRACT In this work, we present a powerful set of synthetic strategies aimed at minimization of auxiliary reagent loading for direct arylation polymerization (DArP) of 2‐bromo‐3‐hexylthiophene. As such, we report efficient lowering of Pd(OAc) 2 catalyst loading as well as loading of other auxiliary reagents, such as neodecanoic acid and N , N ‐dimethylacetamide. Unprecedented low loadings of catalyst down to 0.0313% (313 ppm) were achieved, while producing polymer in high yield (91% after Soxhlet extraction), with a high molecular weight (24.2 kDa) and carefully controlled chemical structure thus making the optimized DArP protocol significantly more cost‐effective, convenient, sustainable, and environmentally friendly. The resulting polymer samples were thoroughly investigated in terms of their chemical structure as well as optical, thermal, chain ordering and electronic properties using GPC analysis, 1 H NMR, MALDI, UV–vis, GIXRD spectroscopy, DSC, and SCLC hole mobility measurements. The results demonstrate that the reagent lowering strategies increase the polymer regioregularity from 94.6 to 96.5% as evidenced by 1 H NMR spectra and corroborated by GIXRD, DSC, and UV–vis measurements. Additionally, polymer samples obtained at low reagent loading are more uniformly proton‐terminated as evidenced by 1 H NMR and MALDI end‐group analysis. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53 , 1492–1499

Rudenko, Andrey E.↗

Hall Effect Characterization of α ‐Irradiated p‐Type 4H‐SiC

Most electrical characterization of radiation damage to semiconductors is conducted on full devices or on low‐doped material. However, evaluating the radiation hardness is challenging in less mature semiconductor systems where low‐doped material is unavailable and full devices are difficult to realize. Herein, temperature‐dependent Hall effect measurements are used to demonstrate α particle‐induced radiation effects in p‐type 4H‐SiC with a room temperature hole concentration of . The 4H‐SiC is irradiated by α particles from a 210 Po source over a fluence of –. Modeling the hole concentration as a function of temperature shows that α radiation causes hole compensation through the introduction of hole traps. The radiation also induces a reduction in hole mobility due to an increase in defect‐related scattering centers. At low temperatures and increasingly higher fluences, the conduction mechanism changes from band conduction to another mechanism.

Frye, Clint D.↗

AC Magnetic Susceptibility of Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} Substituted by Nd{sup 3+} and Ca{sup 2+} Ions

Effect of Nd{sup 3+} and Ca{sup 2+} ion substitutions in Y{sub 3}Ba{sub 5}Cu{sub 8}O{sub 18} (Y-358) was studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), electrical resistivity, and ac magnetic susceptibility measurements. Superconducting samples of type Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} (with 0 ≤ x, y ≤ 0.4) were synthesized by the standard solid-state reaction technique. XRD patterns revealed that all the samples were mainly composed of Y-358 phase with orthorhombic structure. SEM micrographs showed that Nd{sup 3+} and Ca{sup 2+} ion substitutions had the ability to alter the grain morphology of Y-358 to irregular randomly oriented grains with smaller average grain sizes. The temperature-dependent electrical resistivity curves indicated that the superconducting transition temperature T{sub c} was decreased from 96.51 to 87.41 K as the substitution contents were increased from 0 to 0.4. Detailed AC magnetic susceptibility measurements were done using a quantum design physical property measurement system (PPMS) at different dc fields (B = 0.5–20 kG) and frequency of 1 kHz. A comparison between electrical resistivity and AC magnetic susceptibility data was performed. It was found that T{sub cs} obtained from AC magnetic susceptibility were much lower than those obtained from the resistivity measurements, for all studied samples. This was discussed in terms of filamentary paths that could produce sharp pronounced drops in diamagnetism. Generally, the depression in T{sub c} was attributed to the decrease in relative volume fraction of Y-358 or due to trapping of mobile holes or other mechanism connected with oxygen vacancy disorder. Werthamer–Helfand–Hohenberg (WHH) theory was employed to study the temperature dependence of the upper critical magnetic field B{sub c2}(T) for the samples. The relative importance of both orbital and paramagnetic effects in the suppression of superconductivity was described with the aid of Maki parameter (κ{sub M}). The estimated values of the upper critical magnetic field at 0 K, B{sub c2}(0), were found to decrease from 37.3 to 13.5 T as Nd{sup 3+} and Ca{sup 2+} contents were increased from 0 to 0.4. This decrement was attributed to the weak electron–phonon coupling and to the orbital as well as spin pair breaking mechanisms. Furthermore, Ginzburg–Landau coherence length ξ{sub GL} of Y{sub 3 − x}Nd{sub x}Ba{sub 5 − y}Ca{sub y}Cu{sub 8}O{sub 18} was found to increase with the increase of the Nd{sup 3+} and Ca{sup 2+} contents. Therefore, Nd{sup 3+} and Ca{sup 2+} ions play an important role in the pair-breaking mechanism and in suppressing superconductivity of the Y-358 phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

α Irradiation Response on the Electronic Transport Properties of p -B 12 P 2

B 12 P 2 , a wide bandgap semiconductor, has been previously reported to self-heal from high-energy electron bombardment as determined from transmission electron microscopy. However, the effect of irradiation on the electronic transport properties of B 12 P 2 has not been studied. We report electrical transport measurements on B 12 P 2 after α irradiation. The temperature-dependent Hall effect was measured on p-type B 12 P 2 after successive α irradiation from 210 Po over a fluence range of 1 × 10 11 –1 × 10 13 α/cm 2 to test for self-healing of B 12 P 2 to α bombardment. Prior to irradiation, B 12 P 2 displayed electrical transport characteristics of both hopping and impurity/defect band conduction due to background impurities and growth-induced defects. Fluences of 5 × 10 12 α/cm 2 or greater caused a decrease in the hole mobility and an increase in defect band conduction, suggesting defect accumulation in B 12 P 2 .

36 MATERIALS SCIENCE↗

High-performance multilayer WSe 2 field-effect transistors with carrier type control

In this paper, high-performance multilayer WSe 2 field-effect transistor (FET) devices with carrier type control are demonstrated via thickness modulation and a remote oxygen plasma surface treatment. Carrier type control in multilayer WSe 2 FET devices with Cr/Au contacts is initially demonstrated by modulating the WSe 2 thickness. The carrier type evolves with increasing WSe 2 channel thickness, being p-type, ambipolar, and n-type at thicknesses <3, ~4, and >5 nm, respectively. The thickness-dependent carrier type is attributed to changes in the bandgap of WSe 2 as a function of the thickness and the carrier band offsets relative to the metal contacts. Furthermore, we present a strong hole carrier doping effect via remote oxygen plasma treatment. It non-degenerately converts n-type characteristics into p-type and enhances field-effect hole mobility by three orders of magnitude. Finally, this work demonstrates progress towards the realization of high-performance multilayer WSe 2 FETs with carrier type control, potentially extendable to other transition metal dichalcogenides, for future electronic and optoelectronic applications.

36 MATERIALS SCIENCE↗

Thermoelectric performance of Li doped, p-type Mg 2 (Ge,Sn) and comparison with Mg 2 (Si,Sn)

Solid solutions with chemical formula Mg 2 (Si,Ge,Sn) are promising thermoelectric materials with very good properties for the n-type material but significantly worse for the p-type. For power generation applications good n- and p-type materials are required and it has been shown recently that Li doping can enhance the carrier concentration and improve the thermoelectric properties for p-type Mg 2 Si 1-x Sn x . We have investigated the potential of p-type Mg 2 (Ge,Sn) by optimizing Mg 2 Ge 0.4 Sn 0.6 using Li as dopant. We were able to achieve high carrier concentrations (1.4 × 10 20 cm -3 ) and relatively high hole mobilities resulting in high power factors of 1.7 × 10 -3 W m -1 K -2 at 700 K, the highest value reported so far for this class of material. Exchanging Ge by Si allows for a systematic comparison of Mg 2 (Ge,Sn) with Mg 2 (Si,Sn) and shows that Si containing samples exhibit a lower power factor but also a lower thermal conductivity resulting in comparable thermoelectric figure-of-merit. The data is furthermore analyzed in the framework of a single parabolic band model to gain insight on the effect of composition on band structure.

36 MATERIALS SCIENCE↗

Low resistivity p-type Zn{sub 1−x}Al{sub x}O:Cu{sub 2}O composite transparent conducting oxide thin film fabricated by sol–gel method

Graphical abstract: Display Omitted Highlights: ► Cu{sub 2}O doped p-type AZO films was first prepared by sol–gel method. ► AZO:Cu{sub 2}O films showed a polycrystalline Cu{sub 2}O (1 1 0) and Cu (2 0 0) phases. ► p-Type conductivity was achieved by annealing in N{sub 2}/H{sub 2} forming gas at 400 °C. ► p–n junction (ITO/AZO:Cu{sub 2}O) revealed rectifying I–V characteristics. ► The mean optical transmittance of AZO:Cu{sub 2}Ofilms was >90%. -- Abstract: Highly transparent Cu{sub 2}O-doped p-type Zn{sub 1−x}Al{sub x}O (AZO; Al/Zn = 1.5 at%) conducting oxide films were synthesized on glass substrates using a cost effective low temperature sol–gel method. X-ray diffraction of the Cu{sub 2}O-doped AZO (AZO:Cu{sub 2}O) films revealed a polycrystalline Cu{sub 2}O (1 1 0) peak. The I–V measurements of the p–n junction (ITO/AZO:Cu{sub 2}O) revealed rectifying I–V characteristics, showing that these AZO:Cu{sub 2}O films exhibit p-type conductivity. p-Type conductivity was achieved by annealing the AZO:Cu{sub 2}O films in N{sub 2}/H{sub 2} forming gas at 400 °C. The hole concentration, hole mobility and resistivity of the 0.5–2 mol% AZO:Cu{sub 2}O films were 5.41 × 10{sup 18} to 1.99 × 10{sup 20} cm{sup −3}, 8.36–21.6 cm{sup 2}/V s and 1.66 × 10{sup −2} to 6.94 × 10{sup −3} Ω cm, respectively. These results show that post-annealing in a forming gas is effective and practicable in producing p-type AZO.

36 MATERIALS SCIENCE↗

Enhanced hindrance from phenyl outer side chains on nonfullerene acceptor enables unprecedented simultaneous enhancement in organic solar cell performances with 16.7% efficiency

Inner side-chain engineering on Y6 has been a proven successful in improving short-circuit current density (JSC) through fine-tuning aggregated structures of acceptors. However, it fails in tuning the lowest unoccupied molecular orbital level (LUMO) and open-circuit voltage (V OC ). In this paper, we turn to focus on engineering the outer side chains on the flanking thienothiophene units with 4-hexylphenyl (PhC6) and 6-phenylhexyl (C6Ph) chains. Use of PhC6 enhances the steric effect between the attached phenyl and the ending group, which in combination with the additional conjugation effect provided by the linking phenyl leads to upshifted energy levels and increased V OC as a result. Again, substitution with the bulkier PhC6 unprecedentedly improves film-morphology with reduced paracrystalline disorder and long period and increased root-mean-square composition variations as well, leading to increased electron and hole mobilities and suppressed monomolecular recombination with J SC and fill-factor (FF) simultaneously enhanced. The PM6:BTP-PhC6-based devices yield a higher efficiency value of 16.7% than the PM6:BTP-C6Ph-based one (15.5%). Furthermore, this study shows a conceptual advance in materials design towards reducing the conflict between V OC and J SC in binary blended organic solar cells, which can be achieved by introducing bulkier chains to twist the backbone and simultaneously enhance the packing order.

14 SOLAR ENERGY↗

Chalcogenide perovskite BaZrS 3 thin-film electronic and optoelectronic devices by low temperature processing

Owing to its superior visible light absorption and high chemical stability, chalcogenide perovskite barium zirconium sulfide (BaZrS 3 ) has attracted significant attention in the past few years as a potential alternative to hybrid halide perovskites for optoelectronics. However, the high processing temperatures of BaZrS 3 thin films at above 1000 °C severely limits their potential for device applications. Herein, we report the synthesis of BaZrS 3 thin films at temperatures as low as 500 °C, by changing the chemical reaction pathway. The single phase BaZrS 3 thin film was confirmed by X-ray diffraction and Raman spectroscopy. Atomic force microscopy and scanning electron microscopy show that crystalline size and surface roughness were consistently reduced with decreasing annealing temperature. The lower temperatures further eliminate sulfur vacancies and carbon contaminations associated with high temperature processing. The ability to synthesize chalcogenide perovskite thin films at lower temperatures removes a major hurdle for their device fabrication. The photodetectors demonstrate fast response and an on/off ratio of 80. Finally, the fabricated field effect transistors show an ambipolar behavior with electron and hole mobilities of 16.8 cm 2 /Vs and 2.6 cm 2 /Vs, respectively.

36 MATERIALS SCIENCE↗

Near independence of OLED operating voltage on transport layer thickness

We report organic light emitting devices (OLEDs) with weak drive voltage dependence on the thickness of the hole transport layer (HTL) for thicknesses up to 1150 Å using the N,N'-Bis(naphthalen-1-yl)-N,N'-bis(phenyl)-benzidine (α-NPD) and N,N'-bis(3-methyl phenyl)-N,N'-diphenyl-[1,1'-biphenyl]-4,4'diamine (TPD), both of which have hole mobilities in the range of 2 × 10-3 cm2V-1s-1. Lower mobility HTL materials show larger operating voltage dependence on thickness. The near independence of the operating voltage for high mobility transport material thickness was only observed when the energy barrier for charge injection into the transport material was minimized. To ensure low injection barriers, a thin film of 2-(3-(adamantan-1-yl)propyl)-3,5,6-trifluorotetracyanoquinodimethane (F3TCNQ-Adl) was cast from solution onto the ITO surface. These results indicate that thick transport layers can be integrated into OLED stacks without the need for bulk conductivity doping.

30 DIRECT ENERGY CONVERSION↗

Low-boiling-point solvent additives can also enable morphological control in polymer solar cells

Processing organic photovoltaic (OPV) blend solutions with high-boiling-point solvent additives has recently been used for morphological control in bulk-heterojunction OPV cells. Here we show that even low-boiling-point solvents can be effective additives. When P3HT:PCBM OPV cells were processed with a low-boiling-point solvent tetrahydrafuran as an additive in parent solvent o-dichlorobenzene, charge extraction increased leading to fill factors as high as 69.5%, without low work-function cathodes, electrode buffer layers or thermal treatment. This was attributed to PCBM demixing from P3HT domains and better vertical phase separation, as indicated by photoluminescence lifetimes, hole mobilities, and shunt leakage currents. Dependence on solvent parameters and applicability beyond P3HT system was also investigated. (C) 2013 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

p -Azaquinodimethane: A Versatile Quinoidal Moiety for Functional Materials Discovery

The past 50 years of discovery in organic electronics have been driven in large part by the donor–acceptor design principle, wherein electron-rich and electron-poor units are assembled in conjugation with each other to produce small band gap materials. While the utility of this design strategy is undoubtable, it has been largely exhausted as a frontier of new avenues to produce and tune novel functional materials to meet the needs of the ever-increasing world of organic electronics applications. Its sister strategy of joining quinoidal and aromatic groups in conjugation has, by comparison, received much less attention, to a great extent due to the categorically poor stability of quinoidal conjugated motifs. In 2017 though, the p-azaquinodimethane (AQM) motif was first unveiled, which showed a remarkable level of stability despite being a close structural analogue to p-quinodimethane, a notably reactive compound. In contrast, dialkoxy AQM small molecules and polymers are stable even under harsh conditions and could thus be incorporated into conjugated polymers. When polymerized with aromatic subunits, these AQM-based polymers show notably reduced band gaps that follow reversed structure–property trends to some of their donor–acceptor polymer counterparts and yield organic field-effect transistor (OFET) hole mobilities above 5 cm 2 V –1 s –1 . Additionally, in an ongoing study, these AQM-based compounds are also showing promise as singlet fission (SF) active materials due to their mild diradicaloid character. An expanded world of AQMs was accessed through their ditriflate derivatives, which were first used to produce ionic AQMs (iAQMs) sporting two directly attached cationic groups that significantly affect the AQM motif’s electronics, producing strongly electron-withdrawing quinoidal building blocks. Conjugated polyelectrolytes (CPEs) created with these iAQM building blocks exhibit optical band gaps stretching into the near-infrared I (NIR-I) region and showed exemplary behavior as photothermal therapy agents. In contrast to these stable AQM examples, the synthetic exploration of AQMs also produced examples of more typical diradicaloid reactivity but in forms that were controllable and produced intriguing and high-value products. With certain substitution patterns, AQMs were found to dimerize to form highly substituted [2.2]paracyclophanes in distinctly more appreciable yields than typical cyclophane formation reactions. Certain AQM ditriflates, when crystallized, undergo light-induced topochemical polymerization to form ultrahigh molecular weight (>10 6 Da) polymers that showed excellent performances as dielectric energy storage materials. These same AQM ditriflates could be used to produce the strongly electron-donating redox-active pentacyclic structure: pyrazino[2,3-b:5,6-b']diindolizine (PDIz). Importantly, the PDIz motif allowed for the synthesis of exceedingly small band gap (0.7 eV) polymers with absorbances reaching all the way into the NIR-II region that were also found to produce strong photothermal effects. Both as stable quinoidal building blocks and through their controllable diradicaloid reactivity, AQMs have already proven to be versatile and effective as functional organic electronics materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Refined Synthesis and Crystal Growth of Pb{sub 2}P{sub 2}Se{sub 6} for Hard Radiation Detectors.

The refined synthesis and optimized crystal growth of high quality Pb2P2Se6 single crystals are reported. Improved experimental procedures were implemented to reduce the oxygen contamination and improve the stoichiometry of the single crystal samples. The impact of oxygen contamination and the nature of the stoichiometry deviation in the Pb2P2Se6 system were studied by first-principles density functional theory (DFT) electronic structure calculations as well as experimental methods. The DFT calculations indicated that the presence of interstitial oxygen atoms (O-int) leads to the formation of a deep level located near the middle of the gap, as well as a shallow acceptor level near the valence band maximum. In addition, total energy calculations of the heat of formation of Pb2P2Se6 suggest that the region of thermodynamic stability is sufficiently wide. By refining the preparative procedures, high quality Pb2P2Se6 single crystal samples were reproducibly obtained. These Pb2P2Se6 single crystals exhibited excellent optical transparency, electrical resistivity in the range of 10(11) Omega.cm, and a significant increase in photoconductivity. Infrared photoluminescence of the Pb2P2Se6 single crystals was observed over the temperature range of 15-75 K. Detectors fabricated from boules yielded a clear spectroscopic response to both Ag K alpha X-ray and Co-57 gamma-ray radiation. The electron and hole mobility lifetime product (mu tau) of the current Pb2P2Se6 detectors were estimated to be 3.1 x 10(-4) and 4.8 X 10(-5) cm(2)/V, respectively.

Wang, Peng L.↗