SEARCH · Engineering Papers

Results for “Formation factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 2: Experimental determination of hydrogen isotopic equilibrium for ethane-H2 from 30 to 200 °C and propane-H2 from 75 to 200 °C

The stable isotopic compositions of light n-alkanes, including methane, ethane, and propane, are often used to identify the sources and thermal maturity of natural gas samples. Though stable isotopic compositions of these molecules are commonly assumed to be controlled by kinetic isotope effects, recent studies have proposed both carbon and hydrogen isotopic equilibrium may also occur in some samples. Assessing whether samples are in isotopic equilibrium requires knowledge of light alkane equilibrium fractionation factors over geologically relevant temperatures for formation and storage (up to ∼300 °C). In this study, we report experimental results of hydrogen isotopic equilibrium between ethane and H2 from 30 to 200 °C and propane and H2 from 75 to 200 °C. We compare these results with high-level theoretical calculations and provide a preferred polynomial fit to describe equilibrium fractionation factors. Comparison of these fractionation factors with a compilation of ∼500 compiled environmental gas samples supports the proposal that many (∼50%) of these natural gas samples exhibit hydrogen isotopic compositions consistent with having formed in or attained methane-ethane-propane hydrogen isotopic equilibrium over geologically relevant temperatures for formation and storage (50–300 °C).

Turner, Andrew C↗

DOE OSTI2020

Revealing the Formation Energy–Exfoliation Energy–Structure Correlation of MAB Phases Using Machine Learning and DFT

MAB phases are popular as high-temperature materials with high damage tolerance and excellent electrical conductivity that are used to exfoliate two-dimensional (2D) transition metal borides (MBenes); a promising material for developing next- generation nanodevices. In this report, we explore the correlation between the formation energy, exfoliation energy and structural factors of MAB phases using DFT and machine learning. In order to do so, we developed three different machine learning models based on the support vector machine, deep neural network, and random forest regressor to study the stability of the MAB phases by calculating their formation energies. Furthermore, our support vector machine and deep neural network models are capable of predicting the formation energies with mean absolute errors less than 0.1 eV/atom. We demonstrated that the stability of a MAB phase for a given transition metal decreases when the A element changes from Al to Tl. The density functional theory (DFT) re- vealed that M-A and M-B bond strength strongly correlates with the stability of MAB phases. In addition, the exfoliation possibility of 2D MBenes becomes higher when the A element changes from Al to Tl due to weakening of M-A and M-B bonds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Prolonged Stability of Pb-Catalyzed CO 2 Electroreduction to Methyl Formate in Acidic Methanol

Electrochemical CO 2 reduction from renewable energy is a promising route to mitigate greenhouse gas emissions from waste sources while generating value-added products. CO 2 electroreduction in methanol is particularly interesting due to the increased CO 2 solubility compared to water and the propensity to form methyl formate, a product absent in aqueous electrolysis. Here, four factors have been identified as critical to achieving prolonged high selectivity for methyl formate production on a Pb cathode in methanol: high pH near the electrode, low bulk pH, low water content, and regeneration of Pb 2+ sites. Increasing concentration of the formic acid product was observed to induce a selectivity shift towards hydrogen, which was mitigated by the in-situ conversion of the formic acid to methyl formate via an esterification reaction. Furthermore, co-electrolysis of CO 2 with dilute molecular oxygen (4% O 2 ) led to Pb catalyst repair through in-situ surface oxidation. Using CO 2 and dilute O 2 along with single-pass catholyte flow to maintain a low formic acid concentration, sustained high selectivity for methyl formate was attained at ~60% faradaic efficiency at -20 mA cm -2 for over 72 hours.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Oxidation and Associated Pore Structure Modification During Experimental Alteration of Granite

Weathering plays a crucial role in a number of environmental processes, and the microstructure and evolution of multi-scale pore space is a critically important factor in the weathering of geological formations. In igneous rocks the infiltration of meteoric water into initially relatively dry material can cause the rock to begin to disaggregate, increasing porosity and surface area, and allowing further disaggregation and weathering to occur. These processes, in turn, allow biota to colonize the rock, further enhancing the weathering rate. In some igneous rocks this may be driven by oxidation of primary minerals. One such mineral, biotite, has been repeatedly mentioned as a cause of cracking during oxidation. However, the scale-dependence of the processes by which this occurs are poorly understood. We cannot, therefore, accurately extrapolate laboratory reaction rates to the field in predictive numerical models. In order to better understand the effects of oxidation and test the hypothesis that fracture and disaggregation are initiated by swelling of oxidizing biotites, we reacted granite cores in a selenic acid-rich aqueous solution at 200°C for up to 438 days. Elevated temperatures and selenic acid were used to provide relatively fast reaction rates and highly oxidizing conditions in sealed reaction vessels. These experiments were analyzed using a combination of imaging, X-ray diffraction, Mössbauer spectroscopy, and small- and ultra-small angle neutron scattering to interrogate porosity and microfracture formation. The experimental results show little observable biotite swelling, but significant transport and growth of iron oxides and/or clays along grain boundaries throughout the sample. Significant increases in porosity were also observed at the sample rim, likely associated with feldspar alteration. Fractures and transport were observed throughout the core, suggesting that stresses due to crystallization pressures caused by the growing iron phases may be the initiating factors in granite weathering, possibly followed by biotite swelling after sufficient permeability is achieved.

Anovitz, Lawrence M.↗

DOE OSTI2022

Biomass formation and sugar release efficiency of Populus modified by altered expression of a NAC transcription factor

Woody biomass is an important feedstock for biofuel production. Manipulation of wood properties that enable efficient conversion of biomass to biofuel reduces cost of biofuel production. Wood cell wall composition is regulated at several levels that involve expression of transcription factors such as wood-/secondary cell wall-associated NAC domains (WND or SND). In Arabidopsis thaliana, SND1 regulates cell wall composition through activation of its down-stream targets such as MYBs. The functional aspects of SND1 homologs in the woody Populus have been studied through transgenic manipulation. In this study, we investigated the role of PdWND1B, Populus SND1 sequence ortholog, in wood formation using transgenic manipulation through over-expression or silencing under the control of a vascular-specific 4-coumarate-CoA ligase (4CL) promoter. As compared with control plants, PdWND1B-RNAi plants were shorter in height, with significantly reduced stem diameter and dry biomass, whereas there were no significant differences in growth and productivity of PdWND1B over-expression plants. Conversely, PdWND1B over-expression lines showed a significant reduction in cellulose and increase in lignin content, whereas there was no significant impact on lignin content of downregulated lines. Stem carbohydrate composition analysis revealed a decrease in glucose, mannose, arabinose, and galactose, but an increase in xylose in the over-expression lines. Transcriptome analysis revealed upregulation of several downstream transcription factors and secondary cell wall related structural genes in the PdWND1B over-expression lines, partly explaining the observed phenotypic changes in cell wall chemistry. Relative to the control, glucose release efficiency and ethanol production from stem biomass was significantly reduced in over-expression lines. Our results show that PdWND1B is an important factor determining biomass productivity, cell wall chemistry and its conversion to biofuels in Populus.

09 BIOMASS FUELS↗

NASA NTRS1987

Theory of collapse and protostar formation

Interstellar clouds must increase in density by a factor of more than 10 to the 20th in order to form stars. Because observations of the phases intermediate between dense interstellar clouds and pre-main-sequence stars are difficult, theoretical solutions presently provide the primary means for exploring the collapse phase of protostellar formation. The mathematical formulation of the protostellar collapse problem is presented, and various methods employed in solving the equations are outlined. This tutorial emphasizes the numerical approach to the study of the nonlinear time-dependent evolution of collapsing interstellar clouds, including self-gravitation, rotation, and radiative transfer. Results are summarized for the restricted cases of spherical and axisymmetric symmetry, as well as for fully three-dimensional evolutions, and briefly compared to observations of star formation.

Boss, A. P.↗

NASA NTRS2003

Martian and Terrestrial Rock Abrasion from Wind Tunnel and Field Studies

Earth and Mars exhibit ventifacts, rocks that have been abraded by saltating sand. Previous theoretical and laboratory studies have determined abrasion susceptibilities of rocks as a function of sand type and impact angle and rock material strengths. For the last two years we have been engaged in wind tunnel and field studies to better understand the fundamental factors which control and influence rock abrasion and ventifact formation on Earth and Mars. In particular, we are examining: 1) What types of rocks (composition, texture, and shape) preferentially erode and what are the relative rates of one type vs. another? 2) What are the controlling factors of the aeolian sand cloud (flux, particle speed, surface roughness, etc) which favor rock abrasion?, 3) How do specific ventifact characteristics tie into their mode of formation and rock properties? We find several important factors: 1) Initial rock shape controls the rate of abrasion, with steeper faces abrading faster than shallower ones. The relationship is partly dependent on angle-dependent flux (proportional to sin[theta]) but exhibits additional non-linear effects from momentum transfer efficiency and rebound effects that vary with incidence angle. 2) Irregular targets with pits or grooves abrade at greater rates than targets with smooth surfaces, with indentations generally enlarging with time. Surfaces become rougher with time. 3) Targets also abrade via slope retreat, which is roughly dependent on the slope of the front face. The formation of basal sills is common, as observed on terrestrial and Martian ventifacts.

Bridges, N. T.↗

NASA NTRS1978

Modeling structural damping for solids having distinct shear and dilatational loss factors

For steady state time harmonic problems (rigid format 8), the NASTRAN program as currently configured treats internal structural damping through the introduction of a single structural element damping coefficient that typically is viewed as the ratio of the complex to real modulus of elasticity. For problems dealing with two or three dimensional dynamic linear viscoelasticity (e.g. a Kelvin-Voigt viscoelastic model), the present NASTRAN capability cannot directly handle this situation wherein two independent damping coefficients are required to properly model the dissipation phenomenon. A technique is presented whereby the user can adapt the standard versions of NASTRAN (without resorting to either DMAP and/or FORTRAN coding changes) for the purpose of treating this class of problem.

Kalinowski, A. J.↗

NASA NTRS1982

Suppression of osteoblast differentiation during weightlessness

It is pointed out that associated with weightlessness is a marked depression or arrest of bone formation. Although the mechanism of this effect is unknown, it probably involves a failure of osteogenic induction. The present study's objective is to determine if weightlessness alters osteoblast differentiation, as evidenced by a change in relative distribution of large to small nuclei in rat moral periodontal ligament of the maxilla. In conjunction with the U.S./USSR Biological Satellite Program, male Wistar rats were flown aboard a modified Soviet Vostok spacecraft (Cosmos 1129). The results of the study are discussed. Morphometric investigations suggest that depleted numbers of preosteoblasts may be an important factor in the inhibition of bone formation during weightlessness.

Roberts, W. E.↗

NASA NTRS2012

Inviscid Analysis of Extended Formation Flight

Flying airplanes in extended formations, with separation distances of tens of wingspans, significantly improves safety while maintaining most of the fuel savings achieved in close formations. The present study investigates the impact of roll trim and compressibility at fixed lift coefficient on the benefits of extended formation flight. An Euler solver with adjoint-based mesh refinement combined with a wake propagation model is used to analyze a two-body echelon formation at a separation distance of 30 spans. Two geometries are examined: a simple wing and a wing-body geometry. Energy savings, quantified by both formation drag fraction and span efficiency factor, are investigated at subsonic and transonic speeds for a matrix of vortex locations. The results show that at fixed lift and trimmed for roll, the optimal location of vortex impingement is about 10% inboard of the trailing airplane s wing-tip. Interestingly, early results show the variation in drag fraction reduction is small in the neighborhood of the optimal position. Over 90% of energy benefits can be obtained with a 5% variation in transverse and 10% variation in crossflow directions. Early results suggest control surface deflections required to achieve trim reduce the benefits of formation flight by 3-5% at subsonic speeds. The final paper will include transonic effects and trim on extended formation flight drag benefits.

Kless, James↗

DOE OSTI2020

Numerical assessment of fault impact on caprock seals during CO 2 sequestration

Coupled fluid-flow and geomechanical analysis of caprock integrity has gained a lot of attention among scientists and researchers investigating the long-term performance of geologic carbon storage systems. Reactivation of pre-existing fractures within the caprock or re-opening of faults can create permeable pathways which can influence the seal integrity. Stability of the caprock during and after injection of super-critical CO 2 , and the impact of pre-existing fractures in the presence or absence of one or multiple faults have been investigated in this study. The impact of the wellbore orientation and the injection rate are among other key factors in understanding the structural trapping mechanisms within such geological formations. In this study, we numerically investigated the impact of each of these factors. This study revealed the interplay between joints and faults and how different leakage pathways are formed and under which scenario they play a dominant role in terms of CO 2 leakage. Finally, this study also highlights the role of one versus multiple faults in the domain and the importance of the fault hydrological property in forming leakage pathway.

58 GEOSCIENCES↗

DOE OSTI2021

MicroRNA-22 inhibition promotes the development of atherosclerosis via targeting interferon regulator factor 5

Atherosclerosis is generally accepted as a chronic inflammatory disease and is the most important pathological process underlying the cardiovascular diseases. MiR-22 exerts an important role in tumorgenesis, obesity and NAFLD development, as well as cardiovascular diseases. However, a certain role of miR-22 in the pathogenesis of atherosclerosis remains undetermined. Here, we showed that miR-22 exhibited a negative association with the deteriorated atherosclerotic plaque and showed significant downregulated expression in macrophages. Next, treatment of ApoE deficiency (ApoE{sup −/-}) mice with miR-22 inhibitors which were then subjected to high fat diet (HFD) for 12 weeks were performed to investigate the function of miR-22 on atherogenesis. The results exhibited that miR-22 inhibition dramatically promoted atherosclerotic plaques but attenuated plaque stabilization which were accompanied by decreased smooth muscle cell and collagen content, but increased macrophage infiltration and lipid accumulation. More importantly, the in vivo and in vitro experiments suggested that miR-22 inhibition accelerated inflammatory response and foam cell formation. Mechanistically, we demonstrated interferon regulator factor 5 (IRF5) was an important target of miR-22 and it was required for the regulation of inflammation mediated by miR-22 inhibition. Collectively, these evidences revealed that miR-22 inhibition promoted the atherosclerosis progression through activation of IRF5.

60 APPLIED LIFE SCIENCES↗

NASA NTRS2020

Revisiting the Effectiveness Of HCHO/NO2 Ratios for Inferring Ozone Sensitivity to Its Precursors Using High Resolution Airborne Remote Sensing Observations in A High Ozone Episode During the KORUS-AQ Campaign

The nonlinear chemical processes involved in ozone production (P(O3)) have necessitated using proxy indicators to convey information about the primary dependence of P(O3) on volatile organic compounds (VOCs) or nitrogen oxides (NOx). In particular, the ratio of remotely sensed columns of formaldehyde (HCHO) to nitrogen dioxide (NO2) has been widely used for studying O3 sensitivity. Previous studies found that the errors in retrievals and the incoherent relationship between the column and the near-surface concentrations are a barrier in applying the ratio in a robust way. In addition to these obstacles, we provide calculational-observational evidence, using an ensemble of 0-D photochemical box models constrained by DC-8 aircraft measurements on an ozone event during the Korea-United States Air Quality (KORUS-AQ) campaign over Seoul, to demonstrate the chemical feedback of NO2 on the formation of HCHO is a controlling factor for the transition line between NOx-sensitive and NOx-saturated regimes. A fixed value (~2.7) of the ratio of the chemical loss of NOx (LNOx) to the chemical loss of HO2+RO2 (LROx) perceptibly differentiates the regimes. Following this value, data points with a ratio of HCHO/NO2 less than 1 can be safely classified as NOx-saturated regime, whereas points with ratios between 1 and 4 fall into one or the other regime. We attribute this mainly to the HCHO-NO2 chemical relationship causing the transition line to occur at larger (smaller) HCHO/NO2 ratios in VOC-rich (VOC-poor) environments. We then redefine the transition line to LNOx/LROx~2.7 that accounts for the HCHO-NO2 chemical relationship leading to HCHO = 3.7 × (NO2 – 1.14 × 1016 molec.cm-2). Although the revised formula is locally calibrated (i.e., requires for readjustment for other regions), its mathematical format removes the need for having a wide range of thresholds used in HCHO/NO2 ratios that is a result of the chemical feedback. Therefore, to be able to properly take the chemical feedback into consideration, the use of HCHO = a × (NO2 – b) formula should be preferred to the ratio in future works. We then use the Geostationary Trace gas and Aerosol Sensor Optimization (GeoTASO) airborne instrument to study O3 sensitivity in Seoul. The unprecedented spatial (250 × 250 m2) and temporal (~every 2 h) resolutions of HCHO and NO2 observations form the sensor enhance our understanding of P(O3) in Seoul; rather than providing a crude label for the entire city, more in-depth variabilities in chemical regimes are observed that should be able to inform mitigation strategies correspondingly.

KORUS-AQ; formaldehyde; NOx; VOC; OMI; GeoTASO; oz↗

NASA NTRS2012

SGAS 143845.1 + 145407: A Big, Cool Starburst at Redshift 0.816

We present the discovery and a detailed multi-wavelength study of a strongly-lensed luminous infrared galaxy at z=0.816. Unlike most known lensed galaxies discovered at optical or near-infrared wavelengths, this lensed source is red, which the data presented here demonstrate is due to ongoing dusty star formation. The overall lensing magnification (a factor of 17) facilitates observations from the blue optical through to 500 micrometers, fully capturing both the stellar photospheric emission as well as the reprocessed thermal dust emission. We also present optical and near-IR spectroscopy. These extensive data show that this lensed galaxy is in many ways typical of IR-detected sources at z approximates 1, with both a total luminosity and size in accordance with other (albeit much less detailed) measurements in samples of galaxies observed in deep fields with the Spitzer telescope. Its far-infrared spectral energy distribution is well-fit by local templates that are an order of magnitude less luminous than the lensed galaxy; local templates of comparable luminosity are too hot to fit. Its size (D approximately 7 kpc) is much larger than local luminous infrared galaxies, but in line with sizes observed for such galaxies at z approximates 1. The star formation appears uniform across this spatial scale. Thus, this lensed galaxy, which appears representative of vigorously star-forming z approximates 1 galaxies, is forming stars in a fundamentally different mode than is seen at z approximates 0.

Gladders, Michael D.↗

NASA NTRS1987

Ancient dorsa-related stresses of the Tharsis region on Mars

The early structural history of the Martian Tharsis bulge was studied in terms of a compensation model proposed by Froidevaux and Isacks (1984) proposed for terrestrial plateau uplift. The analysis was based on the regional topographic data on the bulge and the distribution of compressional tectonic features and major volcanoes. The results indicate that the initial phases of the Tharsis formation were dominated by the mantle plume doming, followed by extrusional dome raising; the volcanism became the most important bulge building factor only after thickening of the crust. The formation of the Tharsis bulge and the partial relaxation of this bulge have led to significant horizontal stresses and compression within the peripheral areas. The compressional peripheral zone around the bulge gave rise to dorsa formation while the high bulge crests have been in tensional state.

Raitala, Jouko↗

NASA NTRS1993

Oligomerization reactions of ribonucleotides - The reaction of the 5'-phosphorimidazolide of adenosine with diadenosine pyrophosphate on montmorillonite and other minerals

The overall regiospecificity of the 3',5'-phosphodiester bond formation is shown to be increased from 64 to 83 percent when a 9:1 ratio of ImpA to A5'ppA instead of ImpA alone is reacted in the presence of Na(+)-montmorillonite. The major factor in the regiospecificity increase is the formation of 3',5'-linked A5'ppA3'pA and A5'pp-A3'pA3'pA. The results obtained show that ImpA reacts more readily with A5'ppA than it does with another ImpA molecule and that A5'ppA plays a central role in directing the formation of 3',5'-phosphodiester bonds.

Ferris, James P.↗

DOE OSTI2022

Kinetic frustration by limited bond availability controls the LAT protein condensation phase transition on membranes

LAT is a membrane-linked scaffold protein that undergoes a phase transition to form a two-dimensional protein condensate on the membrane during T cell activation. Governed by tyrosine phosphorylation, LAT recruits various proteins that ultimately enable condensation through a percolation network of discrete and selective protein-protein interactions. Here, we describe detailed kinetic measurements of the phase transition, along with coarse-grained model simulations, that reveal that LAT condensation is kinetically frustrated by the availability of bonds to form the network. Unlike typical miscibility transitions in which compact domains may coexist at equilibrium, the LAT condensates are dynamically arrested in extended states, kinetically trapped out of equilibrium. Modeling identifies the structural basis for this kinetic arrest as the formation of spindle arrangements, favored by limited multivalent binding interactions along the flexible, intrinsically disordered LAT protein. These results reveal how local factors controlling the kinetics of LAT condensation enable formation of different, stable condensates, which may ultimately coexist within the cell.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Non-linear MHD modelling of transients in tokamaks: a review of recent advances with the JOREK code

Transient magneto-hydrodynamic (MHD) events like edge localized modes (ELMs) or disruptions are a concern for magnetic confinement fusion power plants. Research with the MHD code JOREK towards understanding control of such instabilities is reviewed here in a concise way to provide a complete overview, while we refer to the original publications for details. Experimental validation for unmitigated vertical displacement events progressed. The mechanism of vertical force mitigation by impurity injection was identified. Two-way eddy current coupling to CARIDDI was completed. Shattered pellet injection was simulated in JET, KSTAR, ASDEX Upgrade (AUG) and ITER. Benign runaway electron beam termination in JET and ITER was studied. Coupling of kinetic REs to the MHD is ongoing and a virtual RE synchrotron radiation diagnostic was developed. Regarding pedestal physics, regimes devoid of large ELMs in AUG were simulated and predictive JT60-SA simulations are ongoing. For ELM suppression by resonant magnetic perturbations (RMPs), AUG, ITER and EAST simulations were performed. A free boundary RMP model was validated against experiments. Evidence for penetrated magnetic islands at the pedestal top based on AUG experiments and simulations was found. Simulations of the naturally ELM-free quiescent H-mode in AUG and HL-3 show external kink mode formation prevents pedestal build-up towards an ELM within windows of the edge safety factor. With kinetic neutral particles, high field side high density formation in ITER was simulated and with kinetic impurities, tungsten transport in AUG RMP plasmas was studied. To capture turbulent transport, electro-static full-f particle in cell models for ion temperature gradient and trapped electron modes were established and benchmarked. Application to RMP plasmas shows enhanced turbulence in comparison to unperturbed states. Energetic particle interactions with MHD were studied. Flux pumping that prevents the safety factor on axis from dropping below unity was simulated. First non-linear stellarator applications include current relaxation in $l$ = 2 stellarators, while verification for advanced stellarators progresses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗