Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fast Ignition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Experimental investigation of piston heat transfer under conventional diesel and reactivity-controlled compression ignition combustion regimes

The piston of a heavy-duty single-cylinder research engine was instrumented with 11 fast-response surface thermocouples, and a commercial wireless telemetry system was used to transmit the signals from the moving piston. The raw thermocouple data were processed using an inverse heat conduction method that included Tikhonov regularization to recover transient heat flux. By applying symmetry, the data were compiled to provide time-resolved spatial maps of the piston heat flux and surface temperature. A detailed comparison was made between conventional diesel combustion and reactivity-controlled compression ignition combustion operations at matched conditions of load, speed, boost pressure, and combustion phasing. The integrated piston heat transfer was found to be 24% lower, and the mean surface temperature was 25 C lower for reactivity-controlled compression ignition operation as compared to conventional diesel combustion, in spite of the higher peak heat release rate. Lower integrated piston heat transfer for reactivity-controlled compression ignition was found over all the operating conditions tested. The results showed that increasing speed decreased the integrated heat transfer for conventional diesel combustion and reactivity-controlled compression ignition. The effect of the start of injection timing was found to strongly influence conventional diesel combustion heat flux, but had a negligible effect on reactivity-controlled compression ignition heat flux, even in the limit of near top dead center high-reactivity fuel injection timings. These results suggest that the role of the high-reactivity fuel injection does not significantly affect the thermal environment even though it is important for controlling the ignition timing and heat release rate shape. The integrated heat transfer and the dynamic surface heat flux were found to be insensitive to changes in boost pressure for both conventional diesel combustion and reactivity-controlled compression ignition. However, for reactivity-controlled compression ignition, the mean surface temperature increased with changes in boost suggesting that equivalence ratio affects steady-state heat transfer.

Splitter, Derek A↗

Enabling Low-Temperature (LTP) Ignition Technologies for Multi-Mode Engines through the Development of a Validated High-Fidelity LTP Model for Predicative Simulations Tools

The goal of multi-mode engine architectures is to extend current lean-burn dilution limits with renewable fuels, which requires spark plugs to deposit high energies (hundreds of mJ) in order to initiate ignition and complete combustion. At elevated energy deposition rates, spark plugs experience increased electrode erosion and thermal losses, which ultimately shortens the spark-plug lifetime and lowers ignition efficiency. As such, in order to safeguard the efficiency gains of multi-mode concepts, new and improved ignition technologies are required. Recently, non-equilibrium low-temperature plasmas (LTP) have been shown to promote energy-efficient ignition via quenching and transport of electronically excited atoms and molecules, selective radical production and fast heating of hydrocarbon/air mixtures [1-2]. Thus, LTP is seen as a technology that can potentially improve the energy extraction efficiency of fuels, while enabling kinetically controlled combustion modes towards fuel leaner conditions to realize current DOE VTO goals of improving the sustainability of future mobility [3]. Although many previous studies have demonstrated the efficacy of plasma-assisted ignition to enhance combustion, the detailed enhancement mechanisms remain largely unknown, especially for oxygenated fuels and at elevated pressures that are most relevant to practical engine conditions. These barriers hinder the development of accurate and comprehensive numerical models that seek to describe LTP-based ignition in existing engine design software tools and methods. Current state-of-the-art simulation capabilities for LTP ignition systems are in need of improvements since they deliver qualitative results only due to important limitations of existing approaches. Firstly, validated kinetic models with elementary steps for plasma discharges in oxygenated fuel/air mixtures of relevance to the transportation sector are required. Such kinetic models do not exist at present and will be developed and validated within this project. Secondly, plasma discharges and reactive mixture ignition are multi-scale, unsteady processes requiring high-performance numerical methods and software that execute efficiently on DOE supercomputers. Such software does not exist at present and will be developed and applied to practical LTP ignition scenarios as part of this project. Thirdly, experimental databases that are tailored to serve as benchmark in support of the development of predictive computational models of LTP ignition do not exist and will be part of this project.

33 ADVANCED PROPULSION SYSTEMS↗

The DISTINCTIVE University Consortium: Transforming High Activity Materials Research in the UK - 18212

The DISTINCTIVE consortium (Decommissioning, Immobilisation and Storage Solutions for Nuclear Waste Inventories) is a partnership of 11 research universities, working to decommission and clean up the legacy of civil nuclear energy generation, sponsored by the Engineering and Physical Sciences Research Council (EPSRC). An important component of the research programme is to develop the skills and facilities to address key research questions, requiring the use of highly radioactive materials. Here we highlight the outcomes of four research projects in which access to state of the art research facilities for working with radioactive materials, supported by international partnerships, has advanced research in plutonium storage and immobilisation, and the disposal of spent nuclear fuels. First, we have developed a viable formulation and process for immobilisation of the UK plutonium stockpile, including commissioning of a radiological hot isostatic press and validation studies using plutonium-239. Second, we have further underpinned the interim storage of PuO{sub 2}, through understanding of water and chlorine sorption / desorption, pertinent to the historic practice of containment within, and degradation of PVC bags. Third, we have developed a novel methodology to investigate the in situ radiolysis induced dissolution of actinide oxide thin films, using synchrotron radiation, to underpin the geological disposal of spent nuclear fuel. Fourth we monitored in situ the oxidation and self-ignition mechanism of uranium carbide, a legacy fuel from the Dounreay Prototype Fast Reactor that is waiting for oxidation treatment prior to permanent storage and/or disposal. Through this programme of research, the DISTINCTIVE consortium is rebuilding the UK capability for research with transuranic materials, which, hitherto, was eroded over decades of disinvestment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Strong shock generation by fast electron energy deposition

It has been suggested that fast electrons may play a beneficial role in the formation of the ignitor shock in shock ignition owing to the high areal density of the fuel at the time of the ignitor pulse. In this paper, we extend previous studies which have focused on monoenergetic electron sources to populations with extended energy distributions. In good agreement with analytic scalings, we show that strong shocks can be produced with peak pressures of a few hundred Mbar to over 1 Gbar using fast electron intensities of 1–10 PW/cm{sup 2} in a uniform deuterium-tritium plasma at 10 g/cm{sup 3}. However, the length required for shock formation increases with fast electron temperature. As this shock formation distance becomes comparable to the target size, the shock is not able to fully develop, and this implies a limit on the ability of fast electrons to aid shock formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An ultra-fast method for generating synthetic down-scattered neutron data for inertial confinement fusion implosions

In inertial confinement fusion experiments at the National Ignition Facility, asymmetries are probed by a variety of neutron diagnostics, including neutron imaging systems, real-time neutron activation diagnostics (RTNADs), and neutron spectrometers. It is often useful to generate synthetic data based on these diagnostics to validate and tune models. However, current methods of doing so using Monte Carlo particle tracing are time-consuming. In this paper, an ultra-fast method is presented for generating synthetic neutron images, RTNAD data, and spectrometry data using line integrals and 3D convolutions. While it does not contain as much physics as particle tracing codes, it is thousands of times faster and produces nearly identical data. This enables analysis techniques that depend on generating large amounts of synthetic data, which will prove very useful for the study of asymmetries going forward.

Deuterium↗

Flame acceleration and transition to detonation in a pre-/main-chamber combustion system

Numerical simulations are performed to study the mechanism of deflagration to detonation transition (DDT) in a pre-/main-chamber combustion system with a stoichiometric ethylene–oxygen mixture. A Godunov algorithm, fifth-order in space, and third-order in time, is used to solve the fully compressible Navier–Stokes equations on a dynamically adapting mesh. A single-step, calibrated chemical diffusive model described by Arrhenius kinetics is used for energy release and conservation between the fuel and the product. The two-dimensional simulation shows that a laminar flame grows in the pre-chamber and then develops into a jet flame as it passes through the orifice. A strong shock forms immediately ahead of the flame, reflecting off the walls and interacting with the flame front. The shock–flame interactions are crucial for the development of flame instabilities, which trigger the subsequent flame development. The DDT arises due to a shock-focusing mechanism, where multiple shocks collide at the flame front. A chemical explosive mode analysis (CEMA) criterion is developed to study the DDT ignition mode. Preliminary one-dimensional computations for a laminar propagating flame, a fast flame deflagration, and a Chapman–Jouguet detonation are conducted to demonstrate the validity of CEMA on the chemical-diffusive model, as well as to determine the proper conditioning value for CEMA diagnostic. The two-dimensional analysis with CEMA indicates that the DDT initiated by the shock-focusing mechanism can form a strong thermal expansion region at the flame front that features large positive eigenvalues for the chemical explosive mode and dominance of the local autoignition mode. Thus, the CEMA criterion proposed in this study provides a robust diagnostic for identifying autoignition-supported DDT, of which the emergence of excessive local autoignition mode is found to be a precursor. The effect of grid size, initial temperature, and orifice size are then evaluated, and results show that although the close-chamber DDT is highly stochastic, the detonation initiation mechanism remains robust.

42 ENGINEERING↗

Solid polystyrene and deuterated polystyrene light output response to fast neutrons

The Neutron Imaging System has proven to be an important diagnostic in studying DT implosion characteristics at the National Ignition Facility. Here, the current system depends on a polystyrene scintillating fiber array, which detects fusion neutrons born in the DT hotspot as well as neutrons that have scattered to lower energies in the surrounding cold fuel. Increasing neutron yields at NIF, as well as a desire to resolve three-dimensional information about the fuel assembly, have provided the impetus to build and install two additional next-generation neutron imaging systems. We are currently investigating a novel neutron imaging system that will utilize a deuterated polystyrene (CD) fiber array instead of standard hydrogen-based polystyrene (CH). Studies of deuterated xylene or deuterated benzene liquid scintillator show an improvement in imaging resolution by a factor of two, but also a reduction in light output as compared to standard plastic. Tests of the relative light output of deuterated polystyrene and standard polystyrene were completed using 14 MeV fusion neutrons generated through implosions of deuterium-tritium filled capsules at the OMEGA laser facility. In addition, we collected data of the relative response of these two scintillators to a wide energy range of neutrons (1-800 MeV) at the Weapons Neutrons Research Facility. Results of these measurements are presented.

47 OTHER INSTRUMENTATION↗

3D Radio Frequency Mapping and Polarization Observations Show Lightning Flashes Were Ignited by Cosmic‐Ray Showers

Previous 2D radio frequency interferometric observations showed that lightning is commonly started with a positive fast discharge (+FD) before a normal negative leader continues from the origin of the +FD to the ensuing lightning flash. However, the inception and development of the +FD cannot be convincingly explained by existing discharge theories. With our new 3D broadband interferometric mapping and polarization system, we observed that the +FD was sometimes followed by an even faster and more extensive negative discharge (−FD) that propagated backward and overshoot the origin by a few hundred meters, as reported by an earlier 2D study. Surprisingly, the signal polarization, which measures the orientation of the discharge current, systematically slanted from the discharge propagation direction and rotated between the two opposite discharges, showing the +FD and −FD were driven by other storm-independent factors in addition to the storm electric field, or otherwise all would align in the same direction. Assuming a cosmic-ray shower (CRS) piercing through the cloud immediately before the +FD/−FD discharge, we found that their path is consistent with a pre-ionized path by the CRS, and the polarizations for the two opposite discharges are consistent with the respective deflected trajectories of high-energy positrons and electrons in the geomagnetic and an electric field. We further analyzed the more commonly observed +FD and showed that it is consistent with the CRS interpretation, suggesting these flashes in thunderstorms were ignited by cosmic-ray showers.

58 GEOSCIENCES↗

Dense plasma heating and Gbar shock formation by a high intensity flux of energetic electrons

Process of shock ignition in inertial confinement fusion implies creation of a high pressure shock with a laser spike having intensity of the order of a few PW/cm{sup 2}. However, the collisional (Bremsstrahlung) absorption at these intensities is inefficient and a significant part of laser energy is converted in a stream of energetic electrons. The process of shock formation in a dense plasma by an intense electron beam is studied in this paper in a planar geometry. The energy deposition takes place in a fixed mass target layer with the areal density determined by the electron range. A self-similar isothermal rarefaction wave of a fixed mass describes the expanding plasma. Formation of a shock wave in the target under the pressure of expanding plasma is described. The efficiency of electron beam energy conversion into the shock wave energy depends on the fast electron energy and the pulse duration. The model is applied to the laser produced fast electrons. The fast electron energy transport could be the dominant mechanism of ablation pressure creation under the conditions of shock ignition. The shock wave pressure exceeding 1 Gbar during 200–300 ps can be generated with the electron pulse intensity in the range of 5–10 PW/cm{sup 2}. The conclusions of theoretical model are confirmed in numerical simulations with a radiation hydrodynamic code coupled with a fast electron transport module.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improving the feasibility of economical proton-boron-11 fusion via alpha channeling with a hybrid fast and thermal proton scheme

The proton-boron-11 (p-B11) fusion reaction is much harder to harness for commercial power than the easiest fusion reaction, namely, the deuterium and tritium (DT) reaction. The p-B11 reaction requires much higher temperatures, and, even at those higher temperatures, the cross section is much smaller. However, as opposed to tritium, the reactants are both abundant and nonradioactive. It is also an aneutronic reaction, thus avoiding radioactivity-inducing neutrons. Economical fusion can only result, however, if the plasma is nearly ignited; in other words if the fusion power is at least nearly equal to the power lost due to radiation and thermal conduction. Because the required temperatures are so high, ignition is thought barely possible for p-B11, with fusion power exceeding the bremsstrahlung power by only around 3%. We show that there is a high upside to changing the natural flow of power in the reactor, putting more power into protons, and less into the electrons. This redirection can be done using waves, which tap the alpha particle power and redirect it into protons through alpha channeling. Using a simple power balance model, we show that such channeling could reduce the required energy confinement time for ignition by a factor of 2.6 when energy is channeled into thermal protons, and a factor of 6.9 when channeled into fast protons near the peak of the reactivity. Furthermore, alpha channeling could dramatically improve the feasibility of economical p-B11 fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of reactive high-power impulse magnetron sputtering discharge studied by time- and space-resolved optical emission spectroscopy and fast imaging

Time- and space-resolved optical emission spectroscopy and fast imaging were used for the investigation of the plasma dynamics of high-power impulse magnetron sputtering discharges. 200 {mu}s pulses with a 50 Hz repetition frequency were applied to a Cr target in Ar, N{sub 2}, and N{sub 2}/Ar mixtures and in a pressure range from 0.7 to 2.66 Pa. The power density peaked at 2.2-6 kW cm{sup -2}. Evidence of dominating self-sputtering was found for all investigated conditions. Up to four different discharge phases within each pulse were identified: (i) the ignition phase, (ii) the high-current metal-dominated phase, (iii) the transient phase, and (iv) the low-current gas-dominated phase. The emission of working gas excited by fast electrons penetrating the space in-between the electrodes during the ignition phase spread far outwards from the target at a speed of 24 km s{sup -1} in 1.3 Pa of Ar and at 7.5 km s{sup -1} in 1.3 Pa of N{sub 2}. The dense metal plasma created next to the target propagated in the reactor at a speed ranging from 0.7 to 3.5 km s{sup -1}, depending on the working gas composition and the pressure. In fact, it increased with higher N{sub 2} concentration and lower pressure. The form of the propagating plasma wave changed from a hemispherical shape in Ar, to a droplike shape extending far from the target in N{sub 2}. An important N{sub 2} emission rise in the latter case was detected during the transition at the end of the metal-dominated phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Deflagration Wave Profiles

Shock initiation in a plastic-bonded explosives (PBX) is due to hot spots. Current reactive burn models are based, at least heuristically, on the ignition and growth concept. The ignition phase occurs when a small localized region of high temperature (or hot spot) burns on a fast time scale. This is followed by a growth phase in which a reactive front spreads out from the hot spot. Propagating reactive fronts are deflagration waves. A key question is the deflagration speed in a PBX compressed and heated by a shock wave that generated the hot spot. Here, the ODEs for a steady deflagration wave profile in a compressible fluid are derived, along with the needed thermodynamic quantities of realistic equations of state corresponding to the reactants and products of a PBX. The properties of the wave profile equations are analyzed and an algorithm is derived for computing the deflagration speed. As an illustrative example, the algorithm is applied to compute the deflagration speed in shock compressed PBX 9501 as a function of shock pressure. The calculated deflagration speed, even at the CJ pressure, is low compared to the detonation speed. The implication of this are briefly discussed.

36 MATERIALS SCIENCE↗

Effects of stereoisomeric structure and bond location on the ignition and reaction pathways of hexenes

The current work presents new experimental autoignition and speciation data on the two cis-hexene isomers: cis-2-hexene and cis-3-hexene. The new data provide insights on the effects of carbon-carbon double bond location and stereoisomeric structures on ignition delay times and reaction pathways for linear hexene isomers. Experiments were performed using the University of Michigan rapid compression facility to determine ignition delay times from pressure-time histories. Stoichiometric (Φ = 1.0) mixtures at dilution levels of inert gas to O 2 = 7.5:1 (mole basis) were investigated at an average pressure of 11 atm and temperatures from 809 to 1052 K. Speciation experiments were conducted at T = 900 K for the two cis-hexene isomers, where fast-gas sampling and gas chromatography were used to identify and quantify the two cis-hexene isomers and stable intermediate species. The ignition delay time data showed negligible sensitivity to the location of the carbon-carbon double bond and the stereoisomeric structure (cis-trans), and the species data showed no correlation with the stereoisomeric structure, but there was a strong correlation of some of the measured species with the location of the double bond in the hexene isomer. In particular, 2-hexene showed strong selectivity to propene, acetaldehyde, and 1,3-butadiene, and 3-hexene showed selectivity to propanal. Model predictions of ignition delay times were in excellent agreement with the experimental data. Furthermore, there was generally good agreement for the model predictions of the species data for 2-hexene; however, the mechanism overpredicted some of the small aldehyde (C 2 -C 4 ) species for 3-hexene. Reaction pathway analysis indicates the hexenes are almost exclusively consumed by H-atom abstraction reactions at the conditions studied (P = 11 atm, T > 900 K), and not by C 3 -C 4 scission as observed in high-temperature (>1300 K) hexene ignition studies. Improved estimates for 3-hexene + OH reactions may improve model predictions for the species measured in this work.

42 ENGINEERING↗

Design and fabrication of a window for the gas Cherenkov detector 3

The gas Cherenkov detector 3 was designed at Los Alamos National Laboratory for use in inertial confinement fusion experiments at both the Omega Laser Facility and the National Ignition Facility. This instrument uses a low-Z gamma-to-electron convertor plate and high pressure gas to convert MeV gammas into UV/visible Cherenkov photons for fast optical detection. This is a follow-on diagnostic from previous versions, with two notable differences: the pressure of the gas is four times higher, and it allows the use of fluorinated gas, requiring metal seals. These changes force significant changes in the window component, having a unique set of requirements and footprint limitations. The selected solution for this component, a sapphire window brazed into a stainless steel flange housing, is described.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Propagation of nuclear burning fronts on accreting neutron stars: X-ray bursts and sub-hertz noise

We identify a new regime of time dependent helium burning for high accretion rate neutron stars and suggest that this burning is the origin of the low-level luminosity variations (on timescales of 10-10(exp 4) s, designated the 'very low-frequency noise'(VLFN) by van der Klis and collaborators) always detected in the brightest accreting X-ray sources. Only two nuclear burning regimes were previously recognized. At accretion rates in excess of the Eddington limit (dot-M approximately greater than (1-3) x 10(exp -8) solar mass/yr), the accreted matter fuses steadily. At very low dot-M, the star's entire surface is rapidly (approximately less than 10 s) burned by a fast propagating convective burning front at regular intervals, giving quasi-periodic Type I X-ray bursts. We show that for the observationally interesting range of 5 x 10(exp -10) solar mass/yr approximately less than dot-M approximately less than 10(exp -8) solar mass/yr, parts of the stellar surface burn slowly. At these accretion rates, a local thermonuclear instability starts a fire which propagates horizontally at v approximately 300 cm/s. The fire propagates around the flammable surface in roughly the same time it takes to accrete enough fuel for the next instability (approximately 10(exp 3)-10(exp 4), so that only a few fires are burning at once, giving rise to large luminosity flares. Nuclear burning is always time dependent for sub-Eddington local accretion rates: a local patch undergoes a recurrent cycle, accumulation fuel for hours until it becomes thermally unstable or is 'ignited' by a nearby burning region. The global pattern of burning and the resulting luminosity are thus very dependent on how fast nuclear fires spread around the star. The nuclear burning luminosity is not uniform over the stellar surface and so may provide a handle on measuring, or constraining, the spin periods of these neutron stars.

Bildsten, Lars↗

Single Particle Combustion of Pre-Stressed Aluminum

An approach for optimizing fuel particle reactivity involves the metallurgical process of pre-stressing. This study examined the effects of pre-stressing on aluminum (Al) particle ignition delay and burn times upon thermal ignition by laser heating. Pre-stressing was by annealing Al powder at 573 K and quenching ranged from slow (i.e., 200 K/min) identified as pre-stressed (PS) Al to fast (i.e., 900 K/min) identified as super quenched (SQ) Al. Synchrotron X-ray Diffraction (XRD) analysis quantified an order of magnitude which increased dilatational strain that resulted from PS Al and SQ Al compared to untreated (UN) Al powder. The results show PS Al particles exhibit reduced ignition delay times resulting from elevated strain that relaxes upon laser heating. SQ Al particles exhibit faster burn times resulting from delamination at the particle core-shell interface that reduces dilatational strain and promotes accelerated diffusion reactions. These results link the mechanical property of strain to reaction mechanisms associated with shell mechanics that explain ignition and burning behavior, and show pre-stressing has the potential to improve particle reactivity.

Hill, Kevin J. (ORCID:0000000202822345)↗

Combustion chemistry of solid propellants

Several studies are described of the chemistry of solid propellant combustion which employed a fast-scanning optical spectrometer. Expanded abstracts are presented for four of the studies which were previously reported. One study of the ignition of composite propellants yielded data which suggested early ammonium perchlorate decomposition and reaction. The results of a study of the spatial distribution of molecular species in flames from uncatalyzed and copper or lead catalyzed double-based propellants support previously published conclusions concerning the site of action of these metal catalysts. A study of the ammonium-perchlorate-polymeric-fuel-binder reaction in thin films, made by use of infrared absorption spectrometry, yielded a characterization of a rapid condensed-phase reaction which is likely important during the ignition transient and the burning process.

Baer, A. D.↗