Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FREQUENCY MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Paired circularly polarized heterodyne ellipsometer

We develop a paired circularly polarized heterodyne ellipsometer (PCPHE), in which a heterodyne interferometer based on a two-frequency circularly polarized laser beam is set up. It belongs to an amplitude-sensitive ellipsometer that is able to provide not only a wider dynamic range of polarization modulation frequency but also a higher detection sensitivity than that of a conventional photometric ellipsometer. A real-time and precise measurement of ellipsometric parameters, which demonstrated an accuracy of less than 1 nm on thickness measurement of SiO2 thin film deposited on silicon substrate, can be applied with the PCPHE.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

RF System Modeling for the CEBAF Energy Upgrade

An RF system model, based on MATLAB/SIMULINK, has been developed for analyzing the basic characteristics of the low level RF (LLRF) control system being designed for the CEBAF 12 GeV Energy Upgrade. In our model, a typical passband cavity representation is simplified to in-phase and quadrature (I&Q) components. Lorentz Force and microphonic detuning are incorporated as a new quadrature carrier frequency (frequency modulation). Beam is also represented as in-phase and quadrature components and superpositioned with the cavity field vector. Signals pass through two low pass filters, where the cutoff frequency is equal to half of the cavity bandwidth, then they are demodulated using the same detuning frequency. Because only baseband I&Q signals are calculated, the simulation process is very fast when compared to other controller-cavity models. During the design process we successfully analyzed gain requirements vs. field stability for different superconducting cavity microphonic backgrounds and Lorentz Force coefficients. Moreover, we were able to evaluate different types of a LLRF system’s control algorithm: GDR (Generator Driven Resonator) and SEL (Self Excited Loop) [1] as well as klystron power requirements for different cavities and beam loads.

99 GENERAL AND MISCELLANEOUS↗

Collisional and Radiative Effects in Transient sub-Doppler Hole Burning: Double Resonance Measurements in CN

We report transient hole-burning and saturation recovery measurements in the CN radical with MHz frequency resolution and 20 ns time resolution. Narrow velocity groups of individual hyperfine levels of selected rotational states in CN (X{sup 2} {Sigma}{sup +}) are depleted and excited (A{sup 2}{pi}{sub i}) with a saturation laser and probed by a counterpropagating, frequency modulated probe beam. Recent work in our lab has used this method to measure and characterize the hyperfine splittings for a set of rotational, fine structure, and parity components of CN (A{sup 2}{pi}{sub i}, v=1). Extending this work, we report time and frequency dependence of the saturation signals following abrupt switching of the CW saturation beam on and off with an electro-optic amplitude modulator. Recovery of the unsaturated absorption following the turnoff of the saturation beam follows pressure-dependent kinetics, driven by collisions with the undissociated NCCN precursor with a rate coefficient of 2 x 10{sup -9} cm{sup 3} s{sup -1} molec{sup -1}. Similar recovery kinetics are observed for two-level saturation resonances, where the signal observed is a combination of X- and A-state kinetics, as well as for three-level crossover resonances, which can be chosen to probe selectively the holefilling in the X state or the decay of velocity-selected A state radicals. The observed recovery rates are 8-10 times faster than the estimated rotationally inelastic contribution. The observed recovery rates are likely dominated by velocity-changing collisions in both X and A states, occurring with similar rates, despite the large difference in the properties of these electronic states. Transient signal risetimes following the turning on of the saturation pulse are consistent with the expected Rabi frequency. At lower pressures ({approx}50 mTorr) and higher beam power ({approx}200 mW), we can observe multiple Rabi cycles before collisions disrupt the coherent excitation and the transient signal reaches a steady state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Gas breakdown mechanism in pulse-modulated asymmetric ratio frequency dielectric barrier discharges

The gas breakdown mechanisms, especially the roles of metastable species in atmospheric pressure pulse-modulated ratio frequency barrier discharges with co-axial cylindrical electrodes, were studied numerically using a one dimensional self-consistent fluid model. Simulation results showed that in low duty cycle cases, the electrons generated from the channels associated with metastable species played a more important role in initializing next breakdown than the direct ionization of helium atoms of electronic grounded states by electron-impact. In order to quantitatively evaluate the contribution to the discharge by the metastables, we defined a “characteristic time” and examined how the value varied with the gap distance and the electrode asymmetry. The results indicated that the lifetime of the metastable species (including He*and He{sub 2}{sup *}) was much longer than that of the pulse-on period and as effective sources of producing electrons they lasted over a period up to millisecond. When the ratio of the outer radius to the inner radius of the cylindrical electrodes was far bigger than one, it was found that the metastables distributed mainly in a cylindrical region around the inner electrode. When the ratio decreased as the inner electrode moved outward, the density of metastables in the discharge region near the outer electrode became gradually noticeable. As the discharging gap continued to decrease, the two hill-shaped distributions gradually merged to one big hill. When the discharge spacing was fixed, asymmetric electrodes facilitated the discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modulation sensitive search for nonvirialized dark-matter axions

Nonvirialized dark-matter axions may be present in the Milky Way halo in the form of low-velocity-dispersion flows. In this paper, the Axion Dark-Matter eXperiment performed a search for the conversion of these axions into microwave photons using a resonant cavity immersed in a strong, static magnetic field. The spread of photon energy in these measurements was measured at spectral resolutions of the order of 1 Hz and below. If the energy variation were this small, the frequency modulation of any real axion signal due to the orbital and rotational motion of Earth would become non-negligible. Conservative estimates of the expected signal modulation were made and used as a guide for the search procedure. The photon frequencies covered by this search are 812–852 and 858–892 MHz, which correspond to an axion mass of 3.36–3.52 and 3.55 – 3.69 μ eV . Finally, no axion signal was found, and limits were placed on the maximum local density of nonvirialized axions of these masses.

79 ASTRONOMY AND ASTROPHYSICS↗

New methodology for measuring electron density perturbations caused by plasma coherent modes using profile reflectometry: Magnitudes and radial profiles in DIII-D

New capabilities of fast-sweep frequency-modulated profile reflectometry are explored to measure electron density ne perturbation magnitudes and radial profiles due to plasma coherent modes in DIII-D. The first approach is based on the frequency analysis of phase perturbations associated with high frequency (~MHz) Alfvén eigenmodes (AEs). The measurement of ~5.5 MHz fast-ion-driven global Alfvén eigenmodes (GAEs) is demonstrated in a neutral beam-heated DIII-D plasma. The GAE induced a broad radial distribution of phase perturbations in the profile reflectometer data. Analysis of these data determined the effective cutoff location displacement and the estimated ne fluctuation profile. In the second approach, high resolution ne profiles are used directly to determine the radial structure of ne perturbations due to a neo-classical tearing mode. These new measurements broaden the application of profile reflectometry and advance the development of AE spectroscopy as a tool for non-invasive diagnosis of fast-ion-driven modes in DIII-D and burning plasmas such as ITER.

47 OTHER INSTRUMENTATION↗

What the Flicker is going on here? Temporal Light Modulation in Automotive Lighting

Temporal light modulation (TLM), colloquially known as “flicker,” is once again an issue in almost all lighting applications, due to widespread adoption of LED and OLED sources and their driving electronics. A subset of LED/OLED lighting systems delivers problematic TLM, often in specific types of residential, commercial, outdoor, and vehicular lighting. Dashboard displays, touchscreens, marker lights, taillights, daytime running lights, interior lighting, etc. frequently use PWM circuits to achieve different luminances for different times of day and user visual adaptation levels. The resulting TLM waveforms and viewing conditions can result in distraction and disorientation, nausea, cognitive effects, and serious health consequences in some populations, occurring with or without the driver, passenger, or pedestrian consciously “seeing” the flicker. There are three visual responses to TLM: direct flicker, the stroboscopic effect, and phantom array effect (also called the “beads effect”). Metrics for the first two have limitations in both calculation and application. The phantom array effect has no established visibility measure at all, and this is the effect most associated with vehicular flicker because of the widespread use of PWM. Conventional wisdom from the recent past, especially concerning acceptable driver frequency ranges, needs to be reconsidered and replaced with improved guidelines to protect health and comfort. Four principal TLM waveform characteristics affect TLM visibility: frequency, modulation depth, duty cycle, and waveshape. This paper proposes much higher frequency operation if PWM control cannot be avoided; but it may be possible to modify the four principal waveform characteristics together in order to achieve reduced TLM visibility and improved health and comfort.

flicker, TLM, temporal light modulation, automotiv↗

Watching Polarons Move in the Energy and Frequency Domains Using Color Impedance Spectroscopy

The hybrid electronic–ionic transport property of π-conjugated polymers enables new (opto)electrochemical device constructs for energy conversion and storage and biosensing applications. One major challenge is separating the energy and frequency dependence of Faradaic events–those involving charge transfer and the redox processes of the conjugated backbone–from the non-Faradaic components, such as ionic motion. Herein, we combine optical spectroscopy with electrochemical impedance spectroscopy (EIS) to resolve the frequency response of ionic–electronic coupling as a function of electrochemical doping potential. First, using EIS, we identify two different frequency regimes resulting in potential-dependent capacitive elements on the order of ~10 μF/cm 2 in a high-frequency regime and ~50–150 μF/cm 2 in a low-frequency regime. Given the larger magnitude and greater potential dependence, we posit that polaronic motion is more likely to occur at low frequencies (<1 kHz) and overlaps with ionic motion. The use of color impedance spectroscopy (CIS) enables observation of polaronic motion with frequency modulation. We observe that higher doping potentials show a greater motion of polarons above the DC-bias baseline concentration for onset in electrochemical doping, but all potentials considered demonstrate a critical frequency at which the polaronic motion is “frozen” (~40 Hz). Furthermore, this critical information obtained from CIS in highly dielectric environments offers a unique figure of merit for future studies on electronic–ionic coupling by which to compare across polymer/electrolyte interfaces, including the role of a charge-supporting electrolyte, a solvent, and alternative Faradaic processes (e.g., electrocatalysis).

36 MATERIALS SCIENCE↗

Implementation of the new multichannel X-mode edge density profile reflectometer for the ICRF antenna on ASDEX Upgrade

A new multichannel frequency modulated continuous-wave reflectometry diagnostic has been successfully installed and commissioned on ASDEX Upgrade to measure the plasma edge electron density profile evolution in front of the Ion Cyclotron Range of Frequencies (ICRF) antenna. The design of the new three-strap ICRF antenna integrates ten pairs (sending and receiving) of microwave reflectometry antennas. The multichannel reflectometer can use three of these to measure the edge electron density profiles up to 2 × 10{sup 19} m{sup −3}, at different poloidal locations, allowing the direct study of the local plasma layers in front of the ICRF antenna. ICRF power coupling, operational effects, and poloidal variations of the plasma density profile can be consistently studied for the first time. In this work the diagnostic hardware architecture is described and the obtained density profile measurements were used to track outer radial plasma position and plasma shape.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effective thermal parameters for a bilayer

A method for calculating the effective thermal conductivity and diffusivity for two-layer structures in photoacoustic experiments is proposed. Unlike previous methods, the proposed procedure provides effective thermal parameters preserving their original physical meaning and without artificial resonances as a function of the modulation frequency of the incident laser beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical and electrical characterization of pulse-modulated argon atmospheric-pressure inductively coupled microplasma jets

The critical parameters determining the generation of the pulse-modulated argon atmospheric-pressure inductively coupled plasma (AP-ICP) microjet were studied by varying the power, P, pulse-modulation frequency, f, and duty ratio, DR. The temporal changes in the net output power, P{sub net}, monitored between the very high frequency power supply and matching network by an rf sampler, and ArI 4s{sup '}[1/2]{sub 1}{sup O}-4p{sup '}[1/2]{sub 0} emission from the antenna were measured to elucidate the behavior of this plasma. The AP-ICP microjet, which produces high-density (0.9-1.1x10{sup 15} cm{sup -3}) nonequilibrium plasma, consists of an alumina discharge tube with the inner diameter of 0.8 mm. The generation diagram of the pulse-modulated plasma was created by having f as the horizontal axis and DR as the vertical axis while varying P up to 50 W. At f{<=}10 kHz, the plasma was generated at above the linear lines of f and DR, which indicated the existence of the critical power-off period of approximately 80 {mu}s. At f>10 kHz, the pulse-modulated plasma was produced above constant DR and almost independent of f. The time-averaged power, P, which is the product of P and DR, had to be more than 8-10 W to sustain the pulse-modulated plasma. From the measurement of the temporal changes in the net power and ArI emission, the dynamic behavior of the pulse-modulated plasma was revealed as follows. The prebreakdown period was present for {approx}5 {mu}s after the power was turned on. Once the plasma was generated, the impedance was changed and the reflected power gradually decreased. A strong emission peak was observed immediately after the breakdown, followed by the gradual increase up to the steady state. Finally, the intense afterpeak was observed at 0.8 {mu}s after the power was turned off.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear processes upon doubling the period of self-modulation oscillations in a solid-state ring laser

Nonlinear phenomena appearing in a solid-state ring laser upon approaching the period-doubling bifurcation point of self-modulation oscillations and inside the doubling region are studied theoretically and experimentally. The bifurcation appears due to the parametric interaction of self-modulation oscillations of the first kind with relaxation oscillations. It is found that the bifurcation diagrams, time dependences of the intensities and power spectrum can significantly differ for counterpropagating waves because of the amplitude nonreciprocity of the ring resonator and the inequality of the moduli of the feedback coefficients. It is shown that when the self-modulation period is doubled, the widths of spectral peaks corresponding the self-modulation frequency and the fundamental relaxation frequency decrease. Noise precursors of doubling bifurcation are studied. It is found that the distance between the peaks of noise precursors increases with increasing the noise intensity. It is demonstrated experimentally that the noise modulation leads to the bifurcation point displacement, which increases with increasing the noise. (nonlinear optical phenomena)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhancement of pyroelectric signal by continuous ultraviolet illumination of epitaxial Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} films

The pyroelectric signal generated by an epitaxial Pb(Zr{sub 0.2}Ti{sub 0.8})O{sub 3} film can be enhanced by continuous illumination with ultraviolet (UV) light. The measured signal increases more than 2 times at low modulation frequencies of the incident infrared (IR) radiation (∼10 Hz) and at wavelengths where the short-circuit photocurrent presents the maximum value (∼280–300 nm). The tentative explanation is that the changes in polarization induced by the temperature variation under modulated IR illumination are generating a variable internal electric field, able to collect the photogenerated carriers produced under continuous UV illumination leading to an additional signal in phase with the pyroelectric one. This finding could be exploited for designing pyroelectric detectors with enhanced characteristics by combining both UV and IR responses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Space-time crystalline order of a high-critical-temperature superconductor with intrinsic Josephson junctions

Abstract We theoretically demonstrate that the high-critical-temperature (high- T c ) superconductor Bi 2 Sr 2 CaCu 2 O 8+ x (BSCCO) is a natural candidate for the recently envisioned classical space-time crystal. BSCCO intrinsically forms a stack of Josephson junctions. Under a periodic parametric modulation of the Josephson critical current density, the Josephson currents develop coupled space-time crystalline order, breaking the continuous translational symmetry in both space and time. The modulation frequency and amplitude span a (nonequilibrium) phase diagram for a so-defined spatiotemporal order parameter, which displays rigid pattern formation within a particular region of the phase diagram. Based on our calculations using representative material properties, we propose a laser-modulation experiment to realize the predicted space-time crystalline behavior. Our findings bring new insight into the nature of space-time crystals and, more generally, into nonequilibrium driven condensed matter systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photon counting technique applied to time-resolved laser-induced fluorescence measurements on a stabilized discharge

A novel approach to perform time-resolved laser-induced fluorescence (LIF) measurements in plasma discharges is presented. The LIF technique relies on a photon counting method associated with a sinusoidal potential modulation on a floating electrode located in the plasma to ensure time coherence. By tuning the modulation frequency, resonance can be reached with the discharge current in order to guarantee repeatable measurement conditions. Time-averaged characteristics of the discharge (such as T{sub e}, n{sub e}, V{sub p}, and V{sub ion}) remain unaffected by the modulation. As an example, the association of the photon counting method with the modulation system is employed to determine the time evolution of several ion velocity groups inside an E × B discharge. Interesting features of the velocity oscillations are examined and pave the way for more focused studies.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Ultrasonic, Non-Invasive Classification/Discrimination of Liquid Explosives (LEs) and Threat Liquids from Non-Threat Liquids in Sealed Containers

Government agencies and homeland security organizations are searching for more effective approaches for dealing with the increasing demand for inspections involving potential threat liquids and hazardous chemicals, including liquid explosives (LEs). The quantity and variability of hand-held and cargo-sized containers being shipped worldwide drives the need for rapid and effective ways for conducting non-intrusive inspections of liquid-filled containers of a diverse range of types, shapes and sizes. Such inspections need to quickly classify/discriminate between liquids within containers and also ascertain the presence of unexpected objects within a container. The science base, methodology and prototype device for classification/discrimination between classes of liquids has been developed. The Pacific Northwest National Laboratory (PNNL) has developed a methodology and prototype device for classification/discrimination of a wide variety of liquids (including threat liquids and their precursors), providing noninvasive liquid classification/discrimination capabilities using a nondestructive ultrasonic measurement approach for inspecting sealed containers. The Container Screening Device (CSD) employs frequency-modulated (FM) chirp excitation and pulse-compression signal processing techniques to measure ultrasonic velocity and a relative attenuation value for liquids within a container, and is capable of determining other acoustic properties from through-transmission, contact measurements over a wide frequency range. Recent algorithm developments are beginning to address the issues of container wall variations and thickness. A description of the basic science, measurement approach and sources of variability in the measurement will be presented and laboratory measurements acquired from a suite of commercial products and precursor liquids used in the manufacturing of Homemade Explosives (HMEs) will be given.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Investigation on cloud vertical structures based on Ka-band cloud radar observations at Wuhan in Central China

Based on vertically pointing observations of Ka-band frequency-modulated continuous millimeter wave cloud radar (MMCR) in 2020, we investigate cloud vertical structures at Wuhan in central China. Case comparison indicates that the cloud top locations in the MMCR observation are largely consistent with those in satellite data. The precipitation has the occurrence frequency of 9.5% over the year, with the maximum value of 16.3% in July and the submaximal value of 14.7% in January, showing the significant influences of monsoons on precipitation at Wuhan. As the humid, cloudy and rainy climate, the probability of precipitation and non-precipitation clouds increases gradually from 53.9% in January to a large value of 71.5% in July. The non-precipitation clouds have the probability of 44.5% in the year, with two prominent peaks at the reflectivities of -35 to -30 dBZ around 12 km in summer and - 37– -32 dBZ around 10 km in spring. The cloud top can reach the heights of 14.49, 16.62, 13.38 and 11.73 km from spring to winter, respectively. The monthly mean cloud layer thickness is the largest (2.18 km) in May and September, and the smallest (1.36 km) in November. The seasonally averaged base and top heights and thickness of clouds have small diurnal variations. The high cloud is predominant in the warm months from May to September, and in the other cool months, the middle cloud has the most fraction. The quantitative investigation of clouds is helpful in improving the cloud parameterization in climate models.

54 ENVIRONMENTAL SCIENCES↗

A high-stability non-contact dilatometer for low-amplitude temperature-modulated measurements

Temperature modulated thermophysical measurements can deliver valuable insights into the phase transformation behavior of many different materials. While especially for non-metallic systems at low temperatures numerous powerful methods exist, no high-temperature device suitable for modulated measurements of bulk metallic alloy samples is available for routine use. In this work a dilatometer for temperature modulated isothermal and non-isothermal measurements in the temperature range from room temperature to 1300 K is presented. The length measuring system is based on a two-beam Michelson laser interferometer with an incremental resolution of 20 pm. The non-contact measurement principle allows for resolving sinusoidal length change signals with amplitudes in the sub-500 nm range and physically decouples the length measuring system from the temperature modulation and heating control. To demonstrate the low-amplitude capabilities, results for the thermal expansion of nickel for two different modulation frequencies are presented. These results prove that the novel method can be used to routinely resolve length-change signals of metallic samples with temperature amplitudes well below 1 K. This high resolution in combination with the non-contact measurement principle significantly extends the application range of modulated dilatometry towards high-stability phase transformation measurements on complex alloys.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗