Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLUID MECHANICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Stability and Heat Transfer Characteristics of Condensing Films

The overall objective of this research is to investigate the fundamental physics of film condensation in reduced gravity. The condensation of vapor on a cool surface is important in many engineering problems,including spacecraft thermal control and also the behavior of condensate films that may form on the interior surfaces of spacecraft. To examine the effects of body force on condensing films, two different geometries have been tested in the laboratory: (1) a stabilizing gravitational body force (+1g, or condensing surface facing 'upwards') and (2) de-stabilizing gravitational body force (-1g, or 'downwards'). For each geometry, different fluid configurations are employed to help isolate the fluid mechanical and thermal mechanisms operative in condensing films. The fluid configurations are (a) a condensing film, and (b) a non-condensing film with film growth by mass addition by through the plate surface. Condensation experiments are conducted in a test cell containing a cooled copper or brass plate with an exposed diameter of 12.7 cm. The metal surface is polished to allow for double-pass shadowgraph imaging, and the test surface is instrumented with imbedded heat transfer gauges and thermocouples. Representative shadowgraph images of a condensing, unstable (-1g) n-pentane film are shown. The interfacial disturbances associated with the de-stabilizing body force leading to droplet formation and break-off can be clearly seen. The heat transfer coefficient associated with the condensing film is shown. The heat transfer coefficient is seen to initially decrease, consistent with the increased thermal resistance due to layer growth. For sufficiently long time, a steady value of heat transfer is observed, accompanied by continuous droplet formation and break-off. The non-condensing cell consists of a stack of thin stainless steel disks 10 cm in diameter mounted in a brass enclosure. The disks are perforated with a regular pattern of 361 holes each 0.25 mm in diameter. Non-condensing experiments in -1g have employed 50 cSt and 125 cSt silicone oil pumped through the perforated disks at a specified rate by a syringe micropump. The time to droplet break-off and the disturbance wavelengths appear to decrease with increasing pumping rate. The ability to reliably perform multi-point, ultrasonic measurements of the film thickness has been demonstrated. A linear array of eight transducers of 6 mm diameter (with a beam footprint of comparable size) are pulsed with a square-wave signal at a frequency of 5 MHz and a pulse duration of approximately 0.3 s. For thin films (60 m to 2-3 mm in thickness) the layer thickness is determined by frequency analysis, where the received ultrasound pulse is Fourier transformed and the spacing between the peaks in the frequency spectrum is analyzed. For thicker layers (up to at least 1 cm in thickness), time-domain analysis is performed of the received ultrasound pulses to generate directly the layer thickness. A time-trace of the film thickness at a point using a single transducer in the linear array is shown for the case of an unstable (-1g) n-pentane film. The oscillations in film thickness are evidently due to the passage and/or shedding of droplets from the cooled plate surface. The entire transducer array was used to measure the changes in film thickness resulting from the passage of gravity waves generated either by an oscillating wall or the impact of a single droplet on the free surface of a film. The enclosure in both cases was 14 cm square and the transducer spacing was 12 mm. Best results were obtained using as test fluid a mixture of 50% glycerol and 50% water with a fluid layer thickness of 3-5 mm. In both cases the measured wavelengths and wave propagation speeds using the ultrasound technique compared reasonably well with those observed by optical imaging. Additional information can be found in the original extended abstract.

Hermanson, J. C.↗
NASA NTRS2000

Novel Optical Diagnostic Techniques for Studying Particle Deposition Upon Large Cylinders in a Sheared Suspension

On a twelve-month voyage to Mars, one astronaut will require at least two tons of potable water and two tons of pure oxygen. Efficient, reliable fluid reclamation is therefore necessary for manned space exploration. Space habitats require a compact, flexible, and robust apparatus capable of solid-fluid mechanical separation over a wide range of fluid and particle densities and particle sizes. In space, centrifugal filtration, where particles suspended in fluid are captured by rotating fixed-fiber mat filters, is a logical candidate for mechanical separation. Non-colloidal particles are deposited on the fibers due to inertial impaction or direct interception. Since rotation rates are easily adjustable, inertial effects are the most practical way to control separation rates for a wide variety of multiphase mixtures in variable gravity environments. Understanding how fluid inertia and differential fluid-particle inertia, characterized by the Reynolds and Stokes numbers, respectively, affect deposition is critical in optimizing filtration in a microgravity environment. This work will develop non-intrusive optical diagnostic techniques for directly visualizing where and when non-colloidal particles deposit upon, or contact, solid surfaces: 'particle proximity sensors'. To model particle deposition upon a single filter fiber, these sensors will be used in ground-based experiments to study particle dynamics as in the vicinity of a large (compared with the particles) cylinder in a simply sheared (i.e., linearly-varying, zero-mean velocity profile) neutrally-buoyant, refractive-index matched solid-liquid suspension.

Yoda, M.↗
DOE OSTI2023

MyCrunchGPT: A LLM Assisted Framework for Scientific Machine Learning

Scientific machine learning (SciML) has advanced recently across many different areas in computational science and engineering. Here, the objective is to integrate data and physics seamlessly without the need of employing elaborate and computationally taxing data assimilation schemes. However, preprocessing, problem formulation, code generation, postprocessing, and analysis are still time- consuming and may prevent SciML from wide applicability in industrial applications and in digital twin frameworks. Here, we integrate the various stages of SciML under the umbrella of ChatGPT, to formulate MyCrunchGPT, which plays the role of a conductor orchestrating the entire workflow of SciML based on simple prompts by the user. Specifically, we present two examples that demonstrate the potential use of MyCrunchGPT in optimizing airfoils in aerodynamics, and in obtaining flow fields in various geometries in interactive mode, with emphasis on the validation stage. To demonstrate the flow of the MyCrunchGPT, and create an infrastructure that can facilitate a broader vision, we built a web app based guided user interface, that includes options for a comprehensive summary report. The overall objective is to extend MyCrunchGPT to handle diverse problems in computational mechanics, design, optimization and controls, and general scientific computing tasks involved in SciML, hence using it as a research assistant tool but also as an educational tool. While here the examples focus on fluid mechanics, future versions will target solid mechanics and materials science, geophysics, systems biology, and bioinformatics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Deformation of Lie–Poisson algebras and chirality

Linearization of a Hamiltonian system around an equilibrium point yields a set of Hamiltonian symmetric spectra: If λ is an eigenvalue of the linearized generator, -λ and $\barλ$ (hence, -$\barλ$) are also eigenvalues—the former implies a time-reversal symmetry, while the latter guarantees the reality of the solution. However, linearization around a singular equilibrium point (which commonly exists in noncanonical Hamiltonian systems) works out differently, resulting in breaking of the Hamiltonian symmetry of spectra; time-reversal asymmetry causes chirality. This interesting phenomenon was first found in analyzing the chiral motion of the rattleback, a boat-shaped top having misaligned axes of inertia and geometry [Z. Yoshida et al., Phys. Lett. A 381, 2772–2777 (2017)]. To elucidate how chiral spectra are generated, we study the three-dimensional Lie–Poisson systems and classify the prototypes of singularities that cause symmetry breaking. The central idea is the deformation of the underlying Lie algebra; invoking Bianchi’s list of all three-dimensional Lie algebras, we show that the so-called class-B algebras, which are produced by asymmetric deformations of the simple algebra s o ( 3 ) , yield chiral spectra when linearized around their singularities. The theory of deformation is generalized to higher dimensions, including the infinite-dimensional Poisson manifolds relevant to fluid mechanics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Sensitivity of Thermal Predictions to Uncertain Surface Tension Data in Laser Additive Manufacturing

To understand the process-microstructure relationships in additive manufacturing (AM), it is necessary to predict the solidification characteristics in the melt pool. This study investigates the influence of Marangoni driven fluid flow on the predicted melt pool geometry and solidification conditions using a continuum finite volume model. A calibrated laser absorptivity was determined by comparing the model predictions (neglecting fluid flow) against melt pool dimensions obtained from single laser melt experiments on a nickel super alloy 625 (IN625) plate. Using this calibrated efficiency, predicted melt pool geometries agree well with experiments across a range of process conditions. When fluid mechanics is considered, a surface tension gradient recommended for IN625 tends to overpredict the influence of convective heat transfer, but the use of an intermediate value reported from experimental measurements of a similar nickel super alloy produces excellent experimental agreement. Despite its significant effect on the melt pool geometry predictions, fluid flow was found to have a small effect on the predicted solidification conditions compared to processing conditions. We find that this result suggests that under certain circumstances, a model only considering conductive heat transfer is sufficient for approximating process-microstructure relationships in laser AM. Extending the model to multiple laser passes further showed that fluid flow also has a small effect on the solidification conditions compared to the transient variations in the process. Furthermore, limitations of the current model and areas of improvement, including uncertainties associated with the phenomenological model inputs are discussed.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Three-dimensional Navier-Stokes calculations of multiple interacting vortex rings

Results from a finite-difference Navier-Stokes code for three-dimensional, unsteady, vortical flows in unbounded domains are presented and analyzed in this paper. The vortical flows presented are representative of vortex rings and other closed vortical tubes or structures in fluid mechanics. Such structures are important elements in fluid flows such as jets, atmospheric turbulence, and the far-field wakes of aircraft, and studies of their interaction may aid in an understanding of complex fluid flows. The paper demonstrates that computational methods can be used as a viable alternative or supplement to experimental techniques for studying the physics of vortex flows. The separate visualization of vortex stretching, convection, and diffusion is presented in this paper for a single elliptical vortex ring.The calculations employ a truncated series expansion technique to simulate the unbounded nature of the fluid flow with a finite computational domain, which is a more accurate technique than the conventional freestream boundary specification. The numerical divergence of the three-dimensional vorticity field is considered as a useful estimate of truncation error, and the use of a kinetic energy decay law as a calculation check is demonstrated. Results from the Navier-Stokes code are presented for the unsteady motion of two and four vortex rings along parallel axes, and the results agree qualitatively with experimental flow visualization.

Chamberlain, J. P.↗
NASA NTRS1974

Application of wave mechanics theory to fluid dynamics problems: Fundamentals

The application of the basic formalistic elements of wave mechanics theory is discussed. The theory is used to describe the physical phenomena on the microscopic level, the fluid dynamics of gases and liquids, and the analysis of physical phenomena on the macroscopic (visually observable) level. The practical advantages of relating the two fields of wave mechanics and fluid mechanics through the use of the Schroedinger equation constitute the approach to this relationship. Some of the subjects include: (1) fundamental aspects of wave mechanics theory, (2) laminarity of flow, (3) velocity potential, (4) disturbances in fluids, (5) introductory elements of the bifurcation theory, and (6) physiological aspects in fluid dynamics.

Krzywoblocki, M. Z. V.↗
NASA NTRS2019

Restore-L Satellite Servicing Internship Final Report

This paper reviews the Restore-L mission purpose and the necessary research and simulations to meet mission specification for the Propellant Transfer Subsystem (PTS). It is essential the PTS undergoes functionality testing, environmental testing, and calculations to understand the capabilities of the system. For the testing of components from PTS, a proper test setup is required. It is vital for test hardware, such as hoses and valves, to stay in place while the test is being performed. For the test hardware to operate correctly, positioning, orientation, and alignment are critical as well. In addition to the testing, calculations for pressure drop were explored. To meet requirements for test setups, designs for test hardware mounts were sketched, 3D modeled, and manufactured. Using fluid mechanics for calculations, a pressure drop equation was applied with known variables from mission specification. With the test hardware mounts designed and manufactured, the test setup was assembled with mounts installed. Test hardware mounts met all design requirements. Calculation for pressure drop were concluded and an answer was achieved. Meeting design requirement, mission specification, and calculating correct results allow the Restore-L mission to make further progress and help understand the effectiveness of the Propellant Transfer Subsystem.

PTS↗
DOE OSTI2018

Principles of aerosol jet printing

Aerosol jet printing (AJP) has emerged as a promising method for microscale digital additive manufacturing using functional nanomaterial inks. While compelling capabilities have been demonstrated in the research community in recent years, the development and refinement of inks and process parameters largely follows empirical observations, with an extensive phase space over which to optimize. While this has led to general qualitative guidelines and ink- and machine-specific correlations, a more fundamental understanding based on principles of aerosol physics and fluid mechanics is lacking. This contrasts with more mature printing technologies, for which foundational physical principles have been rigorously examined. Presented here is a broad framework for describing the AJP process. Simple analytical models are employed to ensure generality and accessibility of the results, while experimental validation using a silver nanoparticle ink supports the physical relevance of the approach. In conclusion, this basic understanding enables a description of process limitations grounded in fundamental principles, as well as guidelines for improved printer design, ink formulation, and print parameter optimization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗