Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FISSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Cold-end Subsystem Testing for the Fission Power System Technology Demonstration Unit

The Fission Power System (FPS) Technology Demonstration Unit (TDU) consists of a pumped sodium-potassium (NaK) loop that provides heat to a Stirling Power Conversion Unit (PCU), which converts some of that heat into electricity and rejects the waste heat to a pumped water loop. Each of the TDU subsystems is being tested independently prior to full system testing at the NASA Glenn Research Center. The pumped NaK loop is being tested at NASA Marshall Space Flight Center; the Stirling PCU and electrical controller are being tested by Sunpower Inc.; and the pumped water loop is being tested at Glenn. This paper describes cold-end subsystem setup and testing at Glenn. The TDU cold end has been assembled in Vacuum Facility 6 (VF 6) at Glenn, the same chamber that will be used for TDU testing. Cold-end testing in VF 6 will demonstrate functionality; validated cold-end fill, drain, and emergency backup systems; and generated pump performance and system pressure drop data used to validate models. In addition, a low-cost proof-of concept radiator has been built and tested at Glenn, validating the design and demonstrating the feasibility of using low-cost metal radiators as an alternative to high-cost composite radiators in an end-to-end TDU test.

Briggs, Maxwell↗
NASA NTRS2013

Cold-End Subsystem Testing for the Fission Power System Technology Demonstration Unit

The Fission Power System (FPS) Technology Demonstration Unit (TDU) consists of a pumped sodiumpotassium (NaK) loop that provides heat to a Stirling Power Conversion Unit (PCU), which converts some of that heat into electricity and rejects the waste heat to a pumped water loop. Each of the TDU subsystems is being tested independently prior to full system testing at the NASA Glenn Research Center. The pumped NaK loop is being tested at NASA Marshall Space Flight Center; the Stirling PCU and electrical controller are being tested by Sunpower Inc.; and the pumped water loop is being tested at Glenn. This paper describes cold-end subsystem setup and testing at Glenn. The TDU cold end has been assembled in Vacuum Facility 6 (VF 6) at Glenn, the same chamber that will be used for TDU testing. Cold-end testing in VF 6 will demonstrate functionality; validated coldend fill, drain, and emergency backup systems; and generated pump performance and system pressure drop data used to validate models. In addition, a low-cost proof-of concept radiator has been built and tested at Glenn, validating the design and demonstrating the feasibility of using low-cost metal radiators as an alternative to highcost composite radiators in an end-to-end TDU test.

Briggs, Mazwell↗
NASA NTRS2019

Update on Radiation Testing for Space Fission Power Systems

Radiation effects on materials and electronics is a major topic that needs to be addressed for a nuclear reactor flight demonstration of the Kilopower reactor. The Kilopower project team has taken steps towards developing a standardized radiation environment qualification program for components and materials. Candidate nuclear reactor facilities for both low fluence electronics and high fluence materials irradiations have been identified and approached. Collaborations are being pursued with both NASA and external experts to ensure that the results of the qualification testing are appropriate and relevant to nuclear fission power flight systems.

Chaiken, Max F.↗
NASA NTRS2019

Commercialization and Human Settlement of the Moon and Cislunar Space Using ISRU, Fission Surface Power, and Advanced In-Space Propulsion Systems

Over 50 years have passed since themovie 2001: A Space Odyssey debuted in April 1968. In the film, Dr. Heywood Floyd flies to a large artificial gravity space station orbiting Earth aboard a commercial space plane. He then embarks on a commuter flight to the Moon arriving there 25 hours later. Today, on the 50th anniversary of the Apollo 11lunar landing, the images portrayed in 2001 remain well beyond our capabilities and 2100: A Space Odyssey seems a more appropriate title for Kubrick and Clarke's film. This paper looks at the key technologies, systems, and supporting infrastructure (in-situ resource utilization (ISRU), fission surface power (FSP), nuclear thermal propulsion (NTP), andorbiting propellant depots), that could be developed by NASA and the private sector over the next 30years allowing the operational capabilities presented in 2001 to be achieved, albeit on a more spartan scale.

Borowski, Stan↗
NASA NTRS2019

Space fission power: NASA's best bet to continue to explore the outer solar system

Implementation of balanced, cost-efficient programs to develop power technologies would enable future Voyager- and Cassini-class missions at the outermost planets; open up subsurface missions at Europa, Enceladus, and Titan; and facilitate orbiter and lander missions at Neptune and Triton. A rebalancing of the NASA power technology portfolio could establish the option of using fission power in space. The timing is right for the development of a small nuclear reactor design (such as KRUSTY) that can provide power for multi-year robotic missions and serve as a pathfinder and risk reduction strategy for the larger needs of future human exploration space power systems.

Cassini, John↗
NASA NTRSDate not supplied

Continued Development of the Pulsed Magnetic Nozzle for the Pulsed Fission Fusion (PuFF) Vehicle

High thrust, high specific impulse propulsion systems, such as PuFF (Pulsed Fission-Fusion)offer a new paradigm of speed and safety when exploring the solar system. To realize thesepossibilites, PuFF needs a mature magnetic nozzle design. PuFF’s magnetic nozzle is uniquein that it must provide power in addition to thrust. In the authors’ opinion, the power systemdesign is fairly mature, but nozzle thrust coil design is less so. Previous work has suggested thatthe PuFF magnetic nozzle will behave similarly to a ‘magnetic reflection chamber,’ relying onprinciples of magnetic flux compression to re-direct nozzle flow. However, recent work, usingthe 3D modeling software SPFMax, suggests that plasma motion in the nozzle will be drivenby the Lorentz force. This recent work is limited in that the plasma did not completely leavethe nozzle before the simulation ended. In this work, we aim to extend the SPFMax modelfrom previous work, with a bolstered electromagnetic field solver, so the model can run untilthe plasma is fully evacuated. We hope to confirm previous results regarding the ideal PuFFnozzle design, but we could be surprised. Through improving the PuFF nozzle model, weaim to reduce technical risk with building the nozzle, realize paradigm-shifting performancenumbers, and allow rapid, reliable, and safe exploration of the solar system.

Nathan M Schilling↗
NASA NTRS2022

Fission Surface Power Project (FSP) TDM Annual Review

This is a power point document to be presented at NASA HQ on March 3, 2022 for the Technology Demonstration Mission program and the management of STMD. It summarizes the activities over the last year of the Fission Surface Power (FSP) project. FSP is a project with the main goal of developing a nuclear reactor for operation on the Moon.

Nuclear↗
NASA NTRS2016

Free-Piston Stirling Power Conversion Unit for Fission Power System, Phase II Final Report

In Phase II, the manufacture and testing of two 6-kW(sub e)Stirling engines was completed. The engines were delivered in an opposed 12-kW(sub e) arrangement with a common expansion space heater head. As described in the Phase I report, the engines were designed to be sealed both hermetically and with a bolted O-ring seal. The completed Phase II convertor is in the bolted configuration to allow future disassembly. By the end of Phase II, the convertor had passed all of the final testing requirements in preparation for delivery to the NASA Glenn Research Center. The electronic controller also was fabricated and tested during Phase II. The controller sets both piston amplitudes and maintains the phasing between them. It also sets the operating frequency of the machine. Details of the controller are described in the Phase I final report. Fabrication of the direct-current to direct-current (DC-DC) output stage, which would have stepped down the main controller output voltage from ~700 to 120 V(sub DC), was omitted from this phase of the project for budgetary reasons. However, the main controller was successfully built, tested with the engines, and delivered. We experienced very few development issues with this high-power controller. The project extended significantly longer than originally planned because of yearly funding delays. The team also experienced several hardware difficulties along the development path. Most of these were related to the different thermal expansions of adjacent parts constructed of different materials. This issue was made worse by the large size of the machine. Thermal expansion problems also caused difficulties in the brazing of the opposed stainless steel sodium-potassium (NaK) heater head. Despite repeated attempts Sunpower was not able to successfully braze the opposed head under this project. Near the end of the project, Glenn fabricated an opposed Inconel NaK head, which was installed prior to delivery for testing at Glenn. Engine development prior to this was performed using both single- and dual-opposed (common expansion space) Inconel heads with clamp-on electric heaters.

Free-piston Stirling Power Conversion Unit↗
NASA NTRS2020

Operational Considerations for Fission Reactors Utilized on Lunar In-Situ Resource Utilization Missions: A Report to the Nuclear Power & Propulsion Technical Discipline Team

This report identifies the considerations related to the operation of space nuclear power reactors that would be utilized for In Situ Resource Utilization (ISRU) missions on the lunar surface. The objective of this study is to evaluate the operational complexities of reactors that would provide electrical and thermal power to a growing lunar ISRU and mining outpost/base.

Fission reactor↗
NASA NTRS2003

A fission powered Mars Telecommunications Orbiter mission concept

This paper details the objectives of the mission, the key constraints that influenced the mission design, and the flight and ground system implementation. Issues that influenced the mission architecture are discussed, as well as the technology assumptions.

space↗