Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Phase detection of spin waves in yttrium iron garnet and metal induced nonreciprocity

Herein we report experiments which characterize spin wave propagation in a thin (111) yttrium iron garnet film for arbitrary angles between the in-plane magnetic field and the mode wavevectors. By measuring the magnetic field evolution of the phase of the wave traveling across the film, we deduce the frequency dependence of the wavevector, the dispersion relation, from which the mode velocity follows. Additionally, we observe multiple nodes in the regime of the propagating Damon-Eshbach mode; these arise from avoided crossings associated with the higher, exchange split, standing wave modes along the film normal, the positions of which correlate with the direct absorption measurements of their positions. This information allows a determination of the exchange parameter. Using this technique, we examine the nonreciprocity in spin wave propagation that results from an adjacent metal layer.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale imaging of Gilbert damping using signal amplitude mapping

Ferromagnetic resonance force microscopy (FMRFM) is a powerful scanned probe technique that uses sub-micrometer-scale, spatially localized standing spin wave modes (LMs) to perform local ferromagnetic resonance (FMR) measurements. In this work, we show the spatially resolved imaging of Gilbert damping in a ferromagnetic material (FM) using FMRFM. Typically damping is measured from the FMR linewidth. We demonstrate an approach to image the spatial variation of Gilbert damping utilizing the LM resonance peak height to measure the LM resonance cone angle. This approach enables determination of damping through field-swept FMRFM at a single excitation frequency. The extreme force sensitivity of similar to 2 fN at room temperature can resolve changes of Gilbert damping as small as ~2 x 10 -4 at 2GHz, corresponding to ~0.16Oe in FMR linewidth resolution. This high sensitivity, high spatial resolution, and single frequency imaging of Gilbert damping creates the opportunity to study spin interactions at the interface between an insulating FM and a small volume of nonmagnetic material such as atomically thin two-dimensional materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proximity-induced magnetism and the enhancement of damping in ferromagnetic/heavy metal systems

The relationship between proximity-induced magnetism (PIM) at the heavy metal/ferromagnet interface and spin-transport across such interfaces has generated significant debate. To investigate the link between the two, element specific x-ray magnetic circular dichroism and ferromagnetic resonance measurements were made on the same CoFe/Au/Pt and NiFe/Au/Pt thin film samples with varying Au thickness, with complementary SIMS analysis, which shows evidence of Ni diffusion from NiFe into the Pt. An approximately linear relationship is observed between the magnitude of Pt PIM and magnitude of damping enhancement in both systems. The results demonstrate that electronic hybridization of the heavy metal and ferromagnet is required for a full understanding of damping enhancement and interfacial spintransport for spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of thin metal contacts on few-layer van der Waals ferrielectric CuInP 2 S 6

Out-of-plane polarized ferroelectric materials in a capacitive structure provide a key component for several technological applications. Furthermore, two-dimensional materials are expected to aid in the quest for both ultrathin and flexible electronics. Of the various two-dimensional ferroelectrics with out-of-plane polarization, CuInP 2 S 6 is special in that the Cu atoms are highly mobile and it has been shown to possess both low- and high-polarization states. Here, using density-functional-theory calculations, we explore the stabilization of the ferroelectric state for several prototypical metal contacts (Gr, Ni, Cu, Au, and Ag). In all cases, we find that the ferroelectric state can be stabilized at fewer layers than in the freestanding case. For all of the considered conventional metal contacts, we also find the existence of a quasi-ferroelectric state that stabilizes a polar phase for thicknesses greater than two layers of CIPS. In the cases of Au and Ag, interfacial alignment and strain can be used to stabilize ferroelectricity at the bilayer limit. Furthermore, we find that the strength of the interaction between the contact and CuInP 2 S 6 also leads to stabilization of the high-polarization state when ferroelectricity is stabilized. Lastly, energy-barrier calculations show that the system is still switchable in the presence of contact doping from the metal contacts.

2D materials↗

Ice sculpting: An artificial spin ice Tutorial on controlling microstate and geometry for magnonics and neuromorphic computing

Artificial spin ice, arrays of strongly interacting nanomagnets, are complex magnetic systems with many emergent properties, rich microstate spaces, intrinsic physical memory, high-frequency dynamics in the GHz range, and compatibility with a broad range of measurement approaches. This Tutorial article aims to provide the foundational knowledge needed to understand, design, develop, and improve the dynamic properties of artificial spin ice. Special emphasis is placed on introducing the theory of micromagnetics, which describes the complex dynamics within these systems, along with their design, fabrication methods, and standard measurement and control techniques. The article begins with a review of the historical background, introducing the underlying physical phenomena and interactions that govern artificial spin ice. We then explore the standard experimental techniques used to prepare the microstate space of the nanomagnetic array and to characterize magnetization dynamics, both in artificial spin ice and more broadly in ferromagnetic materials. Finally, we introduce the basics of neuromorphic computing applied to the case of artificial spin ice systems with a goal to help researchers new to the field grasp these exciting new developments.

Sultana, Rawnak [Univ. of Delaware, Newark, DE (Un↗

ITER Test Blanket Module Error Field Simulation Experiments at DIII-D

Experiments at DIII-D investigated the effects of magnetic error fields similar to those expected from proposed ITER test blanket modules (TBMs) containing ferromagnetic material. Studied were effects on: plasma rotation and locking, confinement, L-H transition, the H-mode pedestal, edge localized modes (ELMs) and ELM suppression by resonant magnetic perturbations, energetic particle losses, and more. The experiments used a purpose-built three-coil mock-up of two magnetized ITER TBMs in one ITER equatorial port. The largest effect was a reduction in plasma toroidal rotation velocity v across the entire radial profile by as much as Delta upsilon/upsilon similar to 60% via non-resonant braking. Changes to global Delta n/n, Delta beta/beta and Delta H(98)/H(98) were similar to 3 times smaller. These effects are stronger at higher beta. Other effects were smaller. The TBM field increased sensitivity to locking by an applied known n = 1 test field in both L-and H-mode plasmas. Locked mode tolerance was completely restored in L-mode by re-adjusting the DIII-D n = 1 error field compensation system. Numerical modelling by IPEC reproduces the rotation braking and locking semi-quantitatively, and identifies plasma amplification of a few n = 1 Fourier harmonics as the main cause of braking. IPEC predicts that TBM braking in H-mode may be reduced by n = 1 control. Although extrapolation from DIII-D to ITER is still an open issue, these experiments suggest that a TBM-like error field will produce only a few potentially troublesome problems, and that they might be made acceptably small.

Schaffer, M J↗

Strong ultrafast demagnetization due to the intraband transitions

Abstract Demagnetization in ferromagnetic transition metals driven by a femtosecond laser pulse is a fundamental problem in solid state physics, and its understanding is essential to the development of spintronic devices.Ab initiocalculation of time-dependent magnetic moment in the velocity gauge so far has not been successful in reproducing the large amount of demagnetization observed in experiments. In this work, we propose a method to incorporate intraband transitions within the velocity gauge through a convective derivative in the crystal momentum space. Our results for transition-element bulk crystals (bcc Fe, hcp Co and fcc Ni) based on the time-dependent quantum Liouville equation show a dramatic enhancement in the amount of demagnetization after the inclusion of an intraband term, in agreement with experiments. We also find that the effect of intraband transitions on each ferromagnetic material is distinctly different because of their band structure and spin property differences. Our finding has a far-reaching impact on understanding of ultrafast demagnetization.

Physics↗

Suppression of spin-state transition in epitaxially strained LaCoO{sub 3}

Epitaxial thin films of LaCoO{sub 3} (e-LCO) exhibit ferromagnetic order with a transition temperature T{sub C}=85 K while polycrystalline thin LaCoO{sub 3} films (p-LCO) remain paramagnetic. The temperature-dependent spin-state structure for both e-LCO and p-LCO was studied by x-ray absorption spectroscopy at the Co L{sub 2,3} and O K edges. Considerable spectral redistributions over temperature are observed for p-LCO. The spectra for e-LCO, on the other hand, do not show any significant changes for temperatures between 30 and 450 K at both edges, indicating that the spin state remains constant and that the epitaxial strain inhibits any population of the low-spin (S=0) state with decreasing temperature. This observation identifies an important prerequisite for ferromagnetism in e-LCO thin films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Short-range Incommensurate Magnetic Order Near the Superconducting Phase Boundary in Fe1+δTe1−xSex

We performed elastic neutron-scattering and magnetization measurements on Fe{sub 1.07}Te{sub 0.75}Se{sub 0.25} and FeTe{sub 0.7}Se{sub 0.3}. Short-range incommensurate magnetic order is observed in both samples. In the former sample with higher Fe content, a broad magnetic peak appears around (0.46,0,0.5) at low temperature, while in FeTe{sub 0.7}Se{sub 0.3}, the broad magnetic peak is found to be closer to the antiferromagnetic (AFM) wave vector (0.5,0,0.5). The incommensurate peaks are only observed on one side of the AFM wave vector for both samples, which can be modeled in terms of an imbalance of ferromagnetic/antiferromagnetic correlations between nearest-neighbor spins. We also find that with higher Se (and lower Fe) concentration, the magnetic order becomes weaker while the superconducting temperature and volume increase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stoner versus Heisenberg: Ultrafast exchange reduction and magnon generation during laser-induced demagnetization

Understanding how the electronic band structure of a ferromagnetic material is modified during laser-induced demagnetization on femtosecond timescales has been a long-standing question in condensed matter physics. Here, we use ultrafast high harmonics to measure time-, energy-, and angle-resolved M-edge magnetic asymmetry spectra for Co lms after optical pumping to induce ultrafast demagnetization. This provides a complete data set that we can compare with advanced ab initio magneto-optical calculations. Here, tur analysis identifies that the dominant mechanisms contributing to ultrafast demagnetization on timescales up to several picoseconds are a transient reduction in the exchange splitting and the excitation of ultrafast magnons. Surprisingly, we nd that the magnon contribution to ultrafast demagnetization is already strong on sub-picosecond timescales, while the reduction in exchange splitting persists to several picoseconds.

36 MATERIALS SCIENCE↗

First-order reversal curve of the magnetostructural phase transition in FeTe

We apply the first-order reversal curve (FORC) method, adapted from studies of ferromagnetic materials, to the magnetostructural phase transition of Fe 1+y Te. FORC measurements reveal two features in the hysteretic phase transition, even in samples where traditional temperature measurements display only a single transition. For Fe 1.13 Te, the influence of magnetic field suggests that the main feature is primarily structural while a smaller, slightly higher-temperature transition is magnetic in origin. By contrast, Fe 1.03 Te has a single transition which shows a uniform response to magnetic field, indicating a stronger coupling of the magnetic and structural phase transitions. We also introduce uniaxial stress, which spreads the distribution width without changing the underlying energy barrier of the transformation. Finally, the work shows how FORC can help disentangle the roles of the magnetic and structural phase transitions in FeTe.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Competition of lattice and spin excitations in the temperature dependence of spin-wave properties

The interplay of magnons and phonons can induce strong temperature variations in the magnetic exchange interactions, leading to changes in the magnetothermal response. This is a central mechanism in many magnetic phenomena, and in the new field of Spin Caloritronics, which focuses on the combination of heat and spin currents. Boson model systems have previously been developed to describe the magnon-phonon coupling but, until recently, studies rely on empirical parameters. In this paper, we propose a first-principles approach to describe the dependence of the magnetic exchange integrals on phonon renormalization, leading to changes in the magnon dispersion as a function of temperature. The temperature enters into the spin dynamics (by introducing fluctuations) as well as in the magnetic exchange itself. Depending on the strength of the coupling, these two temperatures may or may not be equilibrated, yielding different regimes. We test our approach in typical and well-known ferromagnetic materials: Ni, Fe, and Permalloy. Finally, we compare our results to recent experiments on the spin-wave stiffness, and discuss departures from Bloch’s law and parabolic dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrodynamic description of long-distance spin transport through noncollinear magnetization states: Role of dispersion, nonlinearity, and damping

Nonlocal compensation of magnetic damping by spin injection has been theoretically shown to display dynamic, noncollinear magnetization states that carry spin currents over micrometer distances. Such states can be generically referred to as dissipative exchange flows (DEFs) because spatially diffusing spin currents are established by the mutual exchange torque exerted by neighboring spins. Analytical studies to date have been limited to the weak spin injection assumption whereby the equation of motion for the magnetization is mapped to hydrodynamic equations describing spin flow and then linearized. In this work, we analytically and numerically study easy-plane ferromagnetic channels subject to spin injection of arbitrary strength at one extremum under a unified hydrodynamic framework. We propose that DEFs generally exhibit a nonlinear profile along the channel accompanied by a nonlinear frequency tunability. At large injection strengths, we fully characterize a magnetization state we call a contact-soliton DEF (CS-DEF) composed of a stationary soliton at the injection site, which smoothly transitions into a DEF and exhibits a negative frequency tunability. The transition between a DEF and a CS-DEF occurs at the maximum precessional frequency and coincides with the Landau criterion: a subsonic to supersonic flow transition. Leveraging the hydraulic-electrical analogy, the current-voltage characteristics of a nonlinear DEF circuit are presented. Micromagnetic simulations of nanowires that include magnetocrystalline anisotropy and nonlocal dipole fields are in qualitative agreement with the analytical results. The magnetization states found here along with their characteristic profile and spectral features provide quantitative guidelines to pursue an experimental demonstration of DEFs in ferromagnetic materials and establish a unified description for long-distance spin transport.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Continuum Modeling of Inductor Hysteresis and Eddy Current Loss Effects in Resonant Circuits

This paper presents experimental validation of a high-fidelity toroid inductor modeling technique. The aim of this research is to accurately model the instantaneous magnetization state and core losses in ferromagnetic materials. Quasi–static hysteresis effects are captured using a Preisach model. Eddy currents are included by coupling the associated quasi-static Everett function to a simple finite element model representing the inductor cross sectional area. The modeling technique is validated against the nonlinear frequency response from two different series RLC resonant circuits using inductors made of electrical steel and soft ferrite. The method is shown to accurately model shifts in resonant frequency and quality factor. The technique also successfully predicts a discontinuity in the frequency response of the ferrite inductor resonant circuit.

Pries, Jason L.↗

Analytical Modeling of a Double-Sided Flux Concentrating E-Core Transverse Flux Machine with Pole Windings

In this paper, a nonlinear analytical model based on the Magnetic Equivalent Circuit (MEC) method is developed for a double-sided E-Core Transverse Flux Machine (TFM). The proposed TFM has a cylindrical rotor, sandwiched between E-core stators on both sides. Ferrite magnets are used in the rotor with flux concentrating design to attain high airgap flux density, better magnet utilization, and higher torque density. The MEC model was developed using a series-parallel combination of flux tubes to estimate the reluctance network for different parts of the machine including air gaps, permanent magnets, and the stator and rotor ferromagnetic materials, in a two-dimensional (2-D) frame. An iterative Gauss-Siedel method is integrated with the MEC model to capture the effects of magnetic saturation. A single phase, 1 kW, 400 rpm E-Core TFM is analytically modeled and its results for flux linkage, no-load EMF, and generated torque, are verified with Finite Element Analysis (FEA). The analytical model significantly reduces the computation time while estimating results with less than 10 percent error.

30 DIRECT ENERGY CONVERSION↗

Observation of a periodic array of flux-closure quadrants in strained ferroelectric PbTiO 3 films

Nanoscale ferroelectrics are expected to exhibit various exotic domain configurations, such as the full flux-closure pattern that is well known in ferromagnetic materials. Here we observe not only the atomic morphology of the flux-closure quadrant but also a periodic array of flux closures in ferroelectric PbTiO 3 films, mediated by tensile strain on a GdScO 3 substrate. Using aberration-corrected scanning transmission electron microscopy, we directly visualize an alternating array of clockwise and counterclockwise flux closures, whose periodicity depends on the PbTiO 3 film thickness. In the vicinity of the core, the strain is sufficient to rupture the lattice, with strain gradients up to 10 9 per meter. We found engineering strain at the nanoscale may facilitate the development of nanoscale ferroelectric devices.

36 MATERIALS SCIENCE↗

Magnetocaloric effect in La(Fe{sub x}Si{sub 1-x}){sub 13} ferromagnets

The isothermal changes in the magnetic entropy and the lattice entropy and the adiabatic temperature change in La(Fe{sub 0.88}Si{sub 0.12}){sub 13} and La(Fe{sub 0.86}Si{sub 0.14}){sub 13} ferromagnets in a magnetic field are calculated. The calculations are performed with a generalized magnetostriction model of a ferromagnet; the calculation results are compared to experimental data. It is shown that the change in the lattice entropy decreases the magnetocaloric effect and makes it possible to explain the experimental data obtained for La(Fe{sub x}Si{sub 1-x}){sub 13} (x = 0.86, 0.88) ferromagnets. The temperature dependences of the bulk compression moduli of these ferromagnets are calculated, and these dependences indicate a strong lattice softening in the vicinity of the magnetic phase transition in them. The thermal expansion coefficient and some magnetic properties of the ferromagnet with x = 0.86 are measured to determine the numerical values of the parameters entering into calculation formulas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗