Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FACTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

An Experimental Investigation of Incompressible Richtmyer-Meshkov Instability

Richtmyer-Meshkov (RM) instability occurs when two different density fluids are impulsively accelerated in the direction normal to their nearly planar interface. The instability causes small perturbations on the interface to grow and eventually become a turbulent flow. It is closely related to Rayleigh-Taylor instability, which is the instability of a planar interface undergoing constant acceleration, such as caused by the suspension of a heavy fluid over a lighter one in the earth's gravitational field. Like the well-known Kelvin-Helmholtz instability, RM instability is a fundamental hydrodynamic instability which exhibits many of the nonlinear complexities that transform simple initial conditions into a complex turbulent flow. Furthermore, the simplicity of RM instability (in that it requires very few defining parameters), and the fact that it can be generated in a closed container, makes it an excellent test bed to study nonlinear stability theory as well as turbulent transport in a heterogeneous system. However, the fact that RM instability involves fluids of unequal densities which experience negligible gravitational force, except during the impulsive acceleration, requires RM instability experiments to be carried out under conditions of microgravity. This experimental study investigates the instability of an interface between incompressible, miscible liquids with an initial sinusoidal perturbation. The impulsive acceleration is generated by bouncing a rectangular tank containing two different density liquids off a retractable vertical spring. The initial perturbation is produced prior to release by oscillating the tank in the horizontal direction to produce a standing wave. The instability evolves in microgravity as the tank travels up and then down the vertical rails of a drop tower until hitting a shock absorber at the bottom. Planar Laser Induced Fluorescence (PLIF) is employed to visualize the flow. PLIF images are captured by a video camera that travels with the tank. Figure 1 is as sequence of images showing the development of the instability from the initial sinusoidal disturbance far into the nonlinear regime which is characterized by the appearance of mushroom structures resulting from the coalescence of baroclinic vorticity produced by the impulsive acceleration. At later times in this sequence the vortex cores are observed to become unstable showing the beginnings of the transition to turbulence in this flow. The amplitude of the growing disturbance after the impulsive acceleration is measured and found to agree well with theoretical predictions. The effects of Reynolds number (based on circulation) on the development of the vortices and the transition to turbulence are also determined.

Jacobs, J. W.↗
NASA NTRS2003

Time-Variable Gravity Signal due to Extratropic Pacific Water Mass Redistribution

Using the satellite-laser-ranging (SLR) data, Cox and Chao [2002] reported the detection of a large post-1998 anomaly (in the form of a positive jump) in the time series of Earth s lowest-degree gravity harmonic 52, or the dynamic oblateness. Among several groups now examining the mass redistribution in the global geophysical fluids in search of the cause(s), we report here a temporally coinciding anomalies found in the extratropic north + south Pacific basins. Clearly seen in the leading EOFPC mode for extratropic Pacific, these anomalies occurred in sea-surface height, sea-surface temperature, and temperature- and salinity-depth profiles. We based our analysis on two different data sources: TOPEX/Poseidon altimetry, and the ECCO ocean general circulation model output assimilating T/P data. The magnitude of these changes, when converted to equivalent J2 change, appears to be a few times too small to explain the observed J2 directly. These findings, and the fact that the anomalies occurred following the strong 1997-98 El Nino, suggest strong geophysical connection of the interannual-to-decadal variation of 52 with the Pacific Decadal Oscillation (PDO) and the ultimate global-change processes that cause PDO. More work is underway, and additional independent data sources are examined, paying close attention to the fact that the J2 anomaly has been reversing back to normal since 2001. These include: (1) cryospheric contributions (melting of glaciers and ice sheets); (2) land hydrological contributions; (3) polar sea influences ( e g , via deep flow); (4) fluid flow in Earth's core; (5) time-variable gravity signals from SLR in higher harmonic degree/order, including J3,J4, (2,1), and (2,2) coefficients, considering their lower signal-to-noise ratios; (6) Earth rotation data in terms of length-of-day and polar motion.

Chao, B. F.↗
NASA NTRS2000

Hybrid Active/Passive Control of Sound Radiation from Panels with Constrained Layer Damping and Model Predictive Feedback Control

There has been considerable interest over the past several years in applying feedback control methods to problems of structural acoustics. One problem of particular interest is the control of sound radiation from aircraft panels excited on one side by a turbulent boundary layer (TBL). TBL excitation appears as many uncorrelated sources acting on the panel, which makes it difficult to find a single reference signal that is coherent with the excitation. Feedback methods have no need for a reference signal, and are thus suited to this problem. Some important considerations for the structural acoustics problem include the fact that the required controller bandwidth can easily extend to several hundred Hertz, so a digital controller would have to operate at a few kilohertz. In addition, aircraft panel structures have a reasonably high modal density over this frequency range. A model based controller must therefore handle the modally dense system, or have some way to reduce the bandwidth of the problem. Further complicating the problem is the fact that the stiffness and dynamic properties of an aircraft panel can vary considerably during flight due to altitude changes resulting in significant resonant frequency shifts. These considerations make the tradeoff between robustness to changes in the system being controlled and controller performance especially important. Recent papers concerning the design and implementation of robust controllers for structural acoustic problems highlight the need to consider both performance and robustness when designing the controller. While robust control methods such as H1 can be used to balance performance and robustness, their implementation is not easy and requires assumptions about the types of uncertainties in the plant being controlled. Achieving a useful controller design may require many tradeoff studies of different types of parametric uncertainties in the system. Another approach to achieving robustness to plant changes is to make the controller adaptive. For example, a mathematical model of the plant could be periodically updated as the plant changes, and the feedback gains recomputed from the updated model. To be practical, this approach requires a simple plant model that can be updated quickly with reasonable computational requirements. A recent paper by the authors discussed one way to simplify a feedback controller, by reducing the number of actuators and sensors needed for good performance. The work was done on a tensioned aircraft-style panel excited on one side by TBL flow in a low speed wind tunnel. Actuation was provided by a piezoelectric (PZT) actuator mounted on the center of the panel. For sensing, the responses of four accelerometers, positioned to approximate the response of the first radiation mode of the panel, were summed and fed back through the controller. This single input-single output topology was found to have nearly the same noise reduction performance as a controller with fifteen accelerometers and three PZT patches. This paper extends the previous results by looking at how constrained layer damping (CLD) on a panel can be used to enhance the performance of the feedback controller thus providing a more robust and efficient hybrid active/passive system. The eventual goal is to use the CLD to reduce sound radiation at high frequencies, then implement a very simple, reduced order, low sample rate adaptive controller to attenuate sound radiation at low frequencies. Additionally this added damping smoothes phase transitions over the bandwidth which promotes robustness to natural frequency shifts. Experiments were conducted in a transmission loss facility on a clamped-clamped aluminum panel driven on one side by a loudspeaker. A generalized predictive control (GPC) algorithm, which is suited to online adaptation of its parameters, was used in single input-single output and multiple input-single output configurations. Because this was a preliminary look at the potential constrained layer damping for adaptive control, static feedback control with no online adaptation was used. Two configurations of CLD in addition to a bare panel configuration were studied. For each CLD configuration, two sensor arrangements for the feedback controller were compared. The first arrangement used fifteen accelerometers on the panel to estimate the responses of the first six radiation modes of the panel. The second sensor arrangement was simpler, using the summed responses of only four accelerometers to approximate the response of the first radiation mode of the panel. In all cases a PZT patch was mounted at the center of the panel for control input. The performance of the controller was quantified using the responses of the fifteen accelerometers on the panel to estimate radiated sound power. The paper begins with a brief discussion of the GPC algorithm and the experimental setup. The experimental results are discussed next, comparing the CLD and sensor configurations, followed by discussion and conclusions.

Cabell, Randolph H.↗
NASA NTRS1986

Flash spectroscopic studies of the kinetics of the halorhodopsin photocycle

The photoreactions of halorhodopsin are complicated by the fact that the parent pigment and its photoproducts interact with chloride. Thus, in any photoreaction scheme at least four species have to be accounted for: HR565 and HR578 Cl-, as well as HR640 and HR520 Cl-. A photocycle scheme proposed earlier places the two main photointermediates of halorhodopsin, HR520 Cl- and HR640, into a single photocycle, with a chloride-dependent equilibrium between them [Oesterhelt, D., Hegemann, P., & Tittor, J. (1985) EMBO J. 4, 2351-2356]. This scheme, with the additional feature of direct photoproduction of HR640 from HR565, was tested in this work by using numerical solutions of the appropriate differential equations to simulate flash-induced absorption changes at 500 nm (production of HR520 Cl-) and at 660 nm (production of HR640). The time scale of the simulation was ms following the flash. Comparison of the simulated curves with experimental traces yielded a unique set of three rate constants. The proposed photocycle scheme and these rate constants predict well the shapes and amplitudes of flash traces at various chloride concentrations. It appears from the photocycle scheme, and the numerical values of rate constants, that chloride is bound with high affinity to the parent halorhodopsin molecule, but with much lower affinity to its main photointermediate. This may be the consequence of the fact that in the parent halorhodopsin in the retinal configuration is all-trans, but in the two photointermediates it is 13-cis.

Non-NASA Center↗
NASA NTRS1994

The Titan haze revisited: magnetospheric energy sources and quantitative tholin yields

We present laboratory measurements of the radiation yields of complex organic solids produced from N2/CH4 gas mixtures containing 10 or 0.1% CH4. These tholins are thought to resemble organic aerosols produced in the atmospheres of Titan, Pluto, and Triton. The tholin yields are large compared to the total yield of gaseous products: nominally, 13 (C + N)/100 eV for Titan tholin and 2.1 (C + N)/100 eV for Triton tholin. High-energy magnetospheric electrons responsible for tholin production represent a class distinct from the plasma electrons considered in models of Titan's airglow. Electrons with E > 20 keV provide an energy flux approximately 1 x 10(-2) erg cm-2 sec-1, implying from our measured tholin yields a mass flux of 0.5 to 4.0 x 10(-14) g cm-2 sec-1 of tholin. (The corresponding thickness of the tholin sedimentary column accumulated over 4 Gyr on Titan's surface is 4 to 30 m.) This figure is in agreement with required mass fluxes computed from recent radiative transfer and sedimentation models. If, however, these results, derived from experiments at approximately 2 mb, are applied to lower pressure levels toward peak auroral electron energy deposition and scaled with pressure as the gas-phase organic yields, the derived tholin mass flux is at least an order of magnitude less. We attribute this difference to the fact that tholin synthesis occurs well below the level of maximum electron energy deposition and to possible contributions to tholins from UV-derived C2-hydrocarbons. We conclude that Titan tholin, produced by magnetospheric electrons, is alone sufficient to supply at least a significant fraction of Titan's haze--a result consistent with the fact that the optical properties of Titan tholin, among all proposed materials, are best at reproducing Titan's geometric albedo spectrum from near UV to mid-IR in light-scattering models.

Non-NASA Center↗
NASA NTRS2004

ASK Magazine

In this issue, ASK writers explore ways to maintain their balance in their field of Project Management, and even what happens when they don't. From his own experiences. Colby Africa learned that pushing too hard can take a personal toll, even though his project was a success in the end. He looked back and asked himself. At what personal cost? Sometimes one of the most simple - and the most human way - of keeping oneself grounded is not to lose your sense of humor. Ray Morgan's story about a test flight gone bad tells how the sound of their model crashing to the ground was followed by the test team's hysterical laughter. The story, you will see, is much deeper. But the message in the example? Sometimes for no fault of our own. things just don t go as planned. One way of dealing with it is to be able to laugh at ourselves. Of course. a setback itself is not to be taken lightly, but a leader capable of lightening the moment is more likely to set a positive tone for the try, try again. Staying optimistic is important for team morale. specifically when a project is dealt a huge downsizing blow. After his project was cut significantly, Tom Sutliff was able to show his team that all was not lost and to help them focus on the fact that they still had a job to do. He had to balance the new project requirements with the fact that his team had been committed to the original prcject and would be personally affected. He stood back, got a new perspective. and upheld the positivity needed to lead them effectively. Even when you keep your chin up and work to the best of your ability, things still go wrong. It's human nature. People train for years to make it to the Olympics and blow their shot during one crucial second in the spotlight. For Marty Davis, his crucial second was when the contractor dropped his 3,000 pound spacecraft. Rather than point the finger at those around him. Marty stood up like a true leader and acknowledged what he could do better if ever in this situation again.

Laufer, Alexander↗
NASA NTRS2003

Major Impact of Fleet Renewal Over Airports Located in the Most Important Region of Brazil

The present article discusses and analyses the major impacts of the Brazilian carriers fleet renewal regarding Brazilian airport infrastructure in the most important region of the country, the Southeast (SE). A brief historical overview of the country's airline fleet will be presented, demonstrating the need for its renewal (m fact, Brazilian carriers started a major fleet renewal program m the last five years), while analyzing the periods in which a new breed of aircraft was put into service by the major carriers operating in the SE region. The trend of operating the classic regional jets plus the forthcoming entry into service of the "large regional jets" (LRJ, 70-115 seaters) in several point-to-point routes are presented along with the country's carriers" reality of operating these former aircraft in several high-capacity and medium-range routes. The article will focus on the ability of four of the major Southeast's airports to cope with the fleet modernization, mainly due to the fact that the region studied is the most socioeconomic developed, by far, with the largest demand for air transportation, thus making the impacts much more perceptible for the communities and the airport management involved. With the emergence of these impacts, several new projects and investments are being discussed and pushed forward, despite budgetary constrains being a reality in almost every Brazilian city, even in the SE region. In view of this, the paper presents how the general planning could be carried out in order to adapt the airports' infrastructures in function of the proposed (and in some cases, necessary) fleet renewal. Ultimately, we will present the present picture and two future scenarios m order to determine the level of service in the existent passenger terminal facilities in the wake of the possible operation of several new aircraft. Keywords: Airline fleet planning, Airport planning, Regional development, Regional Jets.

Maters, Rafael Waltz↗
NASA NTRS2003

Aircraft Noise Perception Study in Brazil: A Perspective on Airport Sustainable Growth and Environmental Awareness

Aircraft noise perception is related to several variables that are tangible and objective, such as the number of operations, flight schedules. Other variables, instead, are more subjective, such as preferences. However, although their elusiveness, they contribute to determine the individuals' perception of this type of externality. Despite the fact that the complaints related to aeronautical noise have been registered since the decade of 50, it has been observed that the perception of noise seems to have grown, especially since the 80's. It has been argued that this change in noise perception has its roots on the accelerated expansion of air traffic. But, it is necessary to point out the important role played on modeling preferences, by the growing environmental conscience and the higher welfare and quality of life standards and expectations. In that context, the main objective of this paper is to study the aeronautical noise perception in the neighborhoods of the Aeroporto Internacional de Sao Paulo - AISP (the biggest airport of South America). Specifically, it analyzes the relationship between aircraft noise perception and social class, which is expected to be positive. Since noise perception is an intangible variable, this study chose as a proxy the value losses of residential properties, caused by aeronautical noise. The variable social class has been measured utilizing average per capita income of the population who live nearby the airport. The comparison of both, the lowest and the highest social class suggests that the relationship between social class and noise perception is positive in the AISP region. Moreover, it was observed that all social classes are very susceptible to aircraft noise annoyance. In fact, the magnitude of the noise perception proxy for both social classes -the residential value losses- was found to be comparable to levels encountered in developed countries.

deArantesGomesEller, Rogerio↗
NASA NTRS2005

Drive Motor Improved for 8- by 6-Foot Supersonic Wind Tunnel/9- by 15-Foot Low-Speed Wind Tunnel Complex

An operational change made recently in the drive motor system for the 8- by 6-Foot Supersonic Wind Tunnel (8x6 SWT)/9- by 15-Foot Low-Speed Wind Tunnel (9x15 LSWT) complex resulted in dramatic power savings and expanded operating range. The 8x6 SWT/9x15 LSWT complex offers a unique combination of wind tunnel conditions for both high- and low-speed testing. Prior to the work discussed in this article, the 8- by 6-ft test section offered airflows ranging from Mach 0.36 to 2.0. Subsonic testing was done in the 9-ft high, 15-ft wide test area in the return leg of the facility. The air speed in this test section can range from 0 to 175 mph (Mach 0.23). In the past, we varied the air speed by using a combination of the compressor speed and the position of the tunnel flow-control doors. When very slow speeds were required in the 9x15 LSWT, these large tunnel flow control doors might be very nearly full open, bleeding off large quantities of air, even with the drive system operating at its previous minimum speed of about 510 rpm. Power drawn during this mode of operation varied between 15 and 18 MW/hr, but clearly much of this power was not being used to provide air that would be used for testing in the test section. The air exiting these large doors represented wasted power. Early this year, the facility's tunnel drive system was run on one motor instead of three to see if lower drive speeds could be achieved that would, in turn, result in large power savings because unnecessary air would not be blown out of the flow-control doors unnecessarily. In addition, if the drive could be run slower, then slower speeds would also be possible in the 8x6 SWT test section as an added benefit. Results of the first tests performed early last year showed that in fact the drive, when operating on only one motor, actually reached a steady-state speed of only 337 rpm and drew an amazingly small 6 MW/hr of electrical power. During daytime operation of the drive, this meant that it would be possible to save as much as 10 MW/hr, or nearly $600 per hour of operation, for many of the 9x15 LSWT's testing regimes. An added benefit of this power-saving venture was that since the 8x6 SWT and 9x15 LSWT are indeed on a common loop, if the compressor is slowed down to benefit the 9x15 LSWT, then the air moving through the 8x6 SWT is also moving slower than ever before. In fact, testing has proven that the 8x6 SWT can now achieve Mach 0.25, whereas its previous lower limit was Mach 0.36. This added benefit has attracted additional customers

Source record↗
NASA NTRS2005

Effects of Control Mode and R-Ratio on the Fatigue Behavior of a Metal Matrix Composite

Composite Because of their high specific stiffness and strength at elevated temperatures, continuously reinforced metal matrix composites (MMC's) are under consideration for a future generation of aeropropulsion systems. Since components in aeropropulsion systems experience substantial cyclic thermal and mechanical loads, the fatigue behavior of MMC's is of great interest. Almost without exception, previous investigations of the fatigue behavior of MMC's have been conducted in a tension-tension, load-controlled mode. This has been due to the fact that available material is typically less than 2.5-mm thick and, therefore, unable to withstand high compressive loads without buckling. Since one possible use of MMC's is in aircraft skins, this type of testing mode may be appropriate. However, unlike aircraft skins, most engine components are thick. In addition, the transient thermal gradients experienced in an aircraft engine will impose tension-compression loading on engine components, requiring designers to understand how the MMC will behave under fully reversed loading conditions. The increased thickness of the MMC may also affect the fatigue life. Traditionally, low-cycle fatigue (LCF) tests on MMC's have been performed in load control. For monolithic alloys, low-cycle fatigue tests are more typically performed in strain control. Two reasons justify this choice: (1) the critical volume from which cracks initiate and grow is generally small and elastically constrained by the larger surrounding volume of material, and (2) load-controlled, low-cycle fatigue tests of monolithics invariably lead to unconstrained ratcheting and localized necking--an undesired material response because the failure mechanism is far more severe than, and unrelated to, the fatigue mechanism being studied. It is unknown if this is the proper approach to composite testing. However, there is a lack of strain-controlled data on which to base any decisions. Consequently, this study addresses the isothermal, LCF behavior of a [0]_32 MMC tested under strain- and load-controlled conditions for both zero-tension and tension-compression loading conditions. These tests were run at 427 C on thick specimens of SiC-reinforced Ti-15-3. For the fully-reversed tests, no difference was observed in the lives between the load- and strain-controlled tests. However, for the zero-tension tests, the strain-controlled tests had longer lives by a factor of 3 in comparison to the load-controlled tests. This was due to the fact that under strain-control the specimens cyclically softened, reducing the cracking potential. In contrast, the load-controlled tests ratcheted toward larger tensile strains leading to an eventual overload of the fibers. Fatigue tests revealed that specimens tested under fully-reversed conditions had lives approximately an order of magnitude longer than for those specimens tested under zero tension. When examined on a strain-range basis, the fully reversed specimens had similar, but still shorter lives than those of the unreinforced matrix material. However, the composite had a strain limitation at short lives because of the limited strain capacity of the brittle ceramic fiber. The composite also suffered at very high lives because of the lack of an apparent fatigue limit in comparison to the unreinforced matrix. The value of adding fibers to the matrix is apparent when the fatigue lives are plotted as a function of stress range. Here, the composite is far superior to the unreinforced matrix because of the additional load-carrying capacity of the fibers.

Source record↗
NASA NTRS2005

Arcing in LEO - Does the Whole Array Discharge?

The conventional wisdom about solar array arcing in LEO is that only the parts the solar array that are swept over by the arc-generated plasma front are discharged in the initial arc. This limits the amount of energy that can be discharged. Recent work done at the NASA Glenn Research Center has shown that this idea is mistaken. In fact, the capacitance of the entire solar array may be discharged, which for large arrays leads to very large and possibly debilitating arcs, even if no sustained arc occurs. We present the laboratory work that conclusively demonstrates this fact by using a grounded plate that prevents the arc-plasma front from reaching certain array strings. Finally, we discuss the dependence of arc strength and arc pulse width on the capacitance that is discharged, and provide a physical mechanism for discharge of the entire array, even when parts of the array are not accessible to the arc-plasma front. Mitigation techniques are also presented.

Ferguson, Dale C.↗
NASA NTRS2005

Arcing in LEO: Does the Whole Array Discharge?

The conventional wisdom about solar array arcing in LEO is that only the parts of the solar array that are swept over by the arc-generated plasma front are discharged in the initial arc. This limits the amount of energy that can be discharged. Recent work done at the NASA Glenn Research Center has shown that this idea is mistaken. In fact, the capacitance of the entire solar array may be discharged, which for large arrays leads to very large and possibly debilitating arcs, even if no sustained arc occurs. We present the laboratory work that conclusively demonstrates this fact by using a grounded plate that prevents the arc-plasma front from reaching certain array strings. Finally, we discuss the dependence of arc strength and arc pulse width on the capacitance that is discharged, and provide a physical mechanism for discharge of the entire array, even when parts of the array are not accessible to the arc-plasma front. Mitigation techniques are also presented.

Ferguson, Dale C.↗
NASA NTRS2004

Vibration-Based Data Used to Detect Cracks in Rotating Disks

Rotor health monitoring and online damage detection are increasingly gaining the interest of aircraft engine manufacturers. This is primarily due to the fact that there is a necessity for improved safety during operation as well as a need for lower maintenance costs. Applied techniques for the damage detection and health monitoring of rotors are essential for engine safety, reliability, and life prediction. Recently, the United States set the ambitious goal of reducing the fatal accident rate for commercial aviation by 80 percent within 10 years. In turn, NASA, in collaboration with the Federal Aviation Administration, other Federal agencies, universities, and the airline and aircraft industries, responded by developing the Aviation Safety Program. This program provides research and technology products needed to help the aerospace industry achieve their aviation safety goal. The Nondestructive Evaluation (NDE) Group of the Optical Instrumentation Technology Branch at the NASA Glenn Research Center is currently developing propulsion-system-specific technologies to detect damage prior to catastrophe under the propulsion health management task. Currently, the NDE group is assessing the feasibility of utilizing real-time vibration data to detect cracks in turbine disks. The data are obtained from radial blade-tip clearance and shaft-clearance measurements made using capacitive or eddy-current probes. The concept is based on the fact that disk cracks distort the strain field within the component. This, in turn, causes a small deformation in the disk's geometry as well as a possible change in the system's center of mass. The geometric change and the center of mass shift can be indirectly characterized by monitoring the amplitude and phase of the first harmonic (i.e., the 1 component) of the vibration data. Spin pit experiments and full-scale engine tests have been conducted while monitoring for crack growth with this detection methodology. Even so, published data are extremely limited, and the basic foundation of the methodology has not been fully studied. The NDE group is working on developing this foundation on the basis of theoretical modeling as well as experimental data by using the newly constructed subscale spin system shown in the preceding photograph. This, in turn, involved designing an optimal sub-scale disk that was meant to represent a full-scale turbine disk; conducting finite element analyses of undamaged and damaged disks to define the disk's deformation and the resulting shift in center of mass; and creating a rotordynamic model of the complete disk and shaft assembly to confirm operation beyond the first critical concerning the subscale experimental setup. The finite element analysis data, defining the center of mass shift due to disk damage, are shown. As an example, the change in the center of mass for a disk spinning at 8000 rpm with a 0.963-in. notch was 1.3 x 10(exp -4) in. The actual vibration response of an undamaged disk as well as the theoretical response of a cracked disk is shown. Experiments with cracked disks are continuing, and new approaches for analyzing the captured vibration data are being developed to better detect damage in a rotor. In addition, the subscale spin system is being used to test the durability and sensitivity of new NDE sensors that focus on detecting localized damage. This is designed to supplement the global response of the crack-detection methodology described here.

Gyekenyesi, Andrew L.↗
NASA NTRS2005

Keeping Promises

Commitments are between people, not schedules. Project management as practiced today creates a "commitment-free zone," because it assumes that people will commit to centrally managed schedules without providing a mechanism to ensure their work can be done. So they give it their best, but something always seems to come up ..."I tried, but you know how it is." This form of project management does not provide a mechanism to ensure that what should be done, can in fact be done at the required moment. Too often, promises reliable promise. made in coordination meetings are conditional and unreliable. It has been my experience that at times trust can be low and hard to build in this environment. The absence of reliable promises explains why on well-run projects, people are often only completing 30-50 percent of the deliverables they d promised for the week. We all know what a promise is; we have plenty of experience making them and receiving them from others. So what s the problem? The sad fact is that the project environment-like many other work environments- is often so filled with systemic dishonesty, that we don t expect promises that are reliable. Project managers excel when they manage their projects as networks of commitments and help their people learn to elicit and make reliable promises.

Howell, Gregory A.↗
NASA NTRS2005

Monitoring the Intrinsic Absorption Complex Toward RX J1230.8+115

There is a very prominent intrinsic absorption complex in the spectrum of the quasar RX J1230.8+115. It was diagnosed as intrinsic due to partial covering of the quasar by the absorber, which can only happen for material very near to the quasar. Measuring a variability timescale for the absorption would allow us to place a more stringent constraint on the distance of the absorber from the central engine. Furthermore, understanding the variability and covering factors in different transitions can help to identify if it is due to changes in the ionizing source or transverse motion of the absorber. The OVI doublet is covered in the FUSE wavelength range. Unfortunately, our initial target, RX J1230.8+0115 could not be observed due to the failure of the first reaction wheel. We determined that another target, H 1821+643, could be observed and would satisfy similar science goals, understanding intrinsic narrow absorption line systems. Our specific goal for that target was to search for Ne VI11 absorption from the associated absorber. This observation was attempted, but the counts in the Sic channel, where the absorption was expected to lie, were too low to satisfy our science goal. This was, at least in part, due to a misalignment of the SiC mirrors. Because of this problem, more time was awarded. However, even the extra time was too little. It appears that the quasar may be too faint to properly align all the mirrors. So with disappointment, I report that we were not able to accomplish our science goals for this program. The funds were used to support my work with a graduate student, Jie Ding, to evaluate possible replacement targets once we learned that Rx J1230.8+115 would not be observable. We considered the intrinsic NAL candidates that we could find through a partial coverage analysis of doublets in the STIS E140M and E230M quasar spectra taken from the HST archive. We then checked the flux in the FUSE wavelength range, and in most cases of interest it was found to be too low to satisfy our S/N requirement in the exposure time we had been awarded. We decided that H1821+643 was the best choice for this project, even though the associated absorber we would be studying might in fact originate in the cluster with the quasar and not in intrinsic gas. Part of the appeal of the target, was in fact the opportunity to consider this issue. Please do not hesitate to contact me if more detail is needed for this report. I found it difficult to write a satisfying report under the circumstance and am uncertain if I've provided the proper level of information.

Charlton, Jane↗
NASA NTRS2006

Overview of Propellant Delivery Systems at the NASA John C. Stennis Space Center

A wide range of rocket propulsion test work occurs at he NASA John C. Stennis Space Center (SSC) including full-scale engine test activities at test facilities A-1, A-2, B-1 and B-2 as well as combustion device research and development activities at the E-Complex (E-1, E-2. E-3 and E-4) test facilities. One of the greatest challenges associated with operating a test facility is maintaining the health of the primary propellant system and test-critical support systems. The challenge emerges due to the fact that the operating conditions of the various system components are extreme (e.g., low temperatures, high pressures) and due to the fact that many of the components and systems are unique. The purpose of this paper is to briefly describe the experience and modeling techniques that are used to operate the unique test facilities at NASA SSC that continue to support successful propulsion testing.

Haselmaier, L. Haynes↗
NASA NTRS2006

Bacterial Utilization of L-sugars and D-amino Acids

The fact that organotrophic organisms on Earth use L-amino acids and D-sugars as an energy source is recognized as one of the universal features of life. The chirality of organic molecules with asymmetric location of group- radicals was described a relatively long time ago. In 1848, Louis Pasteur discovered chiral molecules when he investigated the way that crystals of sodium ammonium paratartrate rotated the plane of polarization of light. He found that the crystal structures represented the underlying asymmetry of molecules that existed in either lea-handed or right-handed forms (enantiomers). Pasteur observed that abiotic (chemical) processes produced mixtures with equal numbers (racemic) of the two forms but that living organisms possessed a molecular asymmetry that included only one of the enantiomers (homochirality). He speculated that the origin of the asymmetry of chiral biomolecules might hold the key to the nature of life. All of the amino acids in proteins (except for Glycine which is symmetrical) exhibit the same absolute steric configuration as L-glyceraldehyde. D-amino acids are never found in proteins, although they do exist in nature and are often found in polypeptide antibiotics. Constitutional sugars of cells, opposite to the amino acids, are the D-enantiomers, and the appearance of L-sugars in Nature is extremely rare. Notwithstanding this fact, the metabolism of some bacteria does have capability to use amino acids and sugars with alternative chirality. This property may be caused by the function of specific enzymes belonging to the class of isomerases (racemases, epimerases, isomerases, tautomerases). In our laboratory, we have investigated several anaerobic bacterial strains, and have found that some of these bacteria are capable of using D-amino acids and L-sugars. Strain BK1 is capable of growth on D-arginine, but its growth characteristics on L-arginine are approximately twice higher. Another alkaliphilic strain SCAT(sup T) (= ATCC BAA-1084(sup T)= JCM 12857(sup T) = DSM 17722(sup T) = CIP 107910(sup T)) was found to be capable of growth on L-ribose and L-arabinose. It is interesting that this strain was incapable of growth on D-arabinose, which suggests the involvement of some alternative mechanism of enzyme activity. In this paper, we describe the preliminary results of these microbiological studies and discuss some possible implications.

Pikuta, Elena↗
NASA NTRS2008

Challenges and Demands on Automated Software Revision

In the past three decades, automated program verification has undoubtedly been one of the most successful contributions of formal methods to software development. However, when verification of a program against a logical specification discovers bugs in the program, manual manipulation of the program is needed in order to repair it. Thus, in the face of existence of numerous unverified and un- certified legacy software in virtually any organization, tools that enable engineers to automatically verify and subsequently fix existing programs are highly desirable. In addition, since requirements of software systems often evolve during the software life cycle, the issue of incomplete specification has become a customary fact in many design and development teams. Thus, automated techniques that revise existing programs according to new specifications are of great assistance to designers, developers, and maintenance engineers. As a result, incorporating program synthesis techniques where an algorithm generates a program, that is correct-by-construction, seems to be a necessity. The notion of manual program repair described above turns out to be even more complex when programs are integrated with large collections of sensors and actuators in hostile physical environments in the so-called cyber-physical systems. When such systems are safety/mission- critical (e.g., in avionics systems), it is essential that the system reacts to physical events such as faults, delays, signals, attacks, etc, so that the system specification is not violated. In fact, since it is impossible to anticipate all possible such physical events at design time, it is highly desirable to have automated techniques that revise programs with respect to newly identified physical events according to the system specification.

Bonakdarpour, Borzoo↗