Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Emulator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

High Altitude Re-entry Plasma Emulation Experiment (HARPEE)

A table-top apparatus has recently been constructed at the NASA Glenn Research Center to investigate potential solutions for the radio-frequency communication blackout problem -- experienced by landing modules during high-speed atmospheric entry. This customized plasma chamber was designed to emulate Earth-based atmospheric entry plasmas with electron densities in the range of 10^16 m^-3 to 10^19 m^-3. The system makes use of a 40-kHz, perforated coaxial electrode pair to generate a disk-shaped, static plasma with an approximate diameter and thickness of 405 mm and 100 mm, respectively. A translatable Langmuir probe was employed to characterize the radial profile of electron temperature and density as a function the 40-kHz power (< 1 kW) and dry-nitrogen flow rate (< 160 SCCM).

plasma↗
NASA NTRSDate not supplied

Testing of A Photon-Counting Optical Ground Receiver With Emulated Space-to-Ground Link Effects

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) developed and previously characterized a photon-counting optical ground receiver system. The receiver is compliant with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization High Photon Efficiency (HPE) Standard. The standard will be used on the Optical Artemis-2 Orion (O2O) communications demonstration and the Deep Space Optical Communication (DSOC) project aboard the Psyche spacecraft. The receiver system consists of a fiber interconnect, up to sixteen superconducting nanowire single-photon detectors (SNSPDs), and a field programmable gate array (FPGA) based receive modem. Previously, the receiver system architecture was described and test results without emulated link effects were presented. SNSPD device properties, which impact detection jitter and time delay, can limit the receiver dynamic range, especially when operating with varying flux rates (>10 dB) between detectors. Codeword error-rate curves with and without simulated clock drifts attributed to Doppler shift and space transmitter clock differences are presented. Results with ±66 ppm clock differences show minimal performance impact (<0.2 dB). Test results show that the receiver dynamic range (>28 dB) is limited by changing SNSPD detection delays at high photon flux rates.

optical communications↗
NASA NTRSDate not supplied

Testing of A Photon-Counting Optical Ground Receiver With Emulated Space-to-Ground Link Effects

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) developed and previously characterized a photon-counting optical ground receiver system. The receiver is compliant with the Consultative Committee for Space Data Systems (CCSDS) Optical Communications Coding and Synchronization High Photon Efficiency (HPE) Standard. The standard will be used on the Optical Artemis-2 Orion (O2O) communications demonstration and the Deep Space Optical Communication (DSOC) project aboard the Psyche spacecraft. The receiver system consists of a fiber interconnect, up to sixteen superconducting nanowire single-photon detectors (SNSPDs), and a field programmable gate array (FPGA) based receive modem. Previously, the receiver system architecture was described and test results without emulated link effects were presented. SNSPD device properties, which impact detection jitter and time delay, can limit the receiver dynamic range, especially when operating with varying flux rates (>10 dB) between detectors. Codeword error-rate curves with and without simulated clock drifts attributed to Doppler shift and space transmitter clock differences are presented. Results with ±66 ppm clock differences show minimal performance impact (<0.2 dB). Test results show that the receiver dynamic range (>28 dB) is limited by changing SNSPD detection delays at high photon flux rates.

optical communications↗
NASA NTRS2024

Moon Tycoon Version 2: A 3D Lunar Surface Emulator for Desktops and Virtual Reality

Moon Tycoon Version 2 (V2) enables and encourages in-situ resource utilization (ISRU) technology developers, principal investigators (PI), and managers across the agency to design and visualize various Lunar operations and missions with a high degree of photorealism. Users are completely immersed in the emulated Moon environment, enabling them to gain new knowledge as they explore the Lunar surface. Moon Tycoon V2 will soon be released to the NASA Software Catalog for public distribution, which will allow external partners, academia, and other interested parties from the public domain to take part.

Kurt Leucht↗
NASA NTRSDate not supplied

Comparison of Multivariate Time Series Prediction Techniques for Emulating Noah-LSM Soil Moisture Outputs

Land surface models are crucial tools for many earth science applications including numerical weather prediction, water resource and crop monitoring, and climatological analysis. Given a set of atmospheric forcings, seasonal data, and static parameters, models like Noah-LSM solve for land surface quantities including skin temperature, sensible heat flux, and soil moisture. While these calculations are theoretically robust, they are often computationally expensive. Since artificial neural networks (ANNs) are universal function approximators, they can learn to emulate the output of a deterministic numerical model given a time series of input forcings, with the learned ANN having substantially shorter execution time. The ANN could efficiently parameterize other models, generate ensembles, and provide first-guess inputs for retrievals. As such, with the goal of developing a model that efficiently mimics the output of Noah-LSM given NLDAS2 forcings on a region covering much of the central US, we examine and compare several neural network architectures for the multi-horizon multivariate time series forecasting problem. Recent literature includes a diverse set of approaches including autoregressive architectures like LSTM and GRU, parametric and non-parametric statistical predictors (ForecastNet and MQRNN), self-attention (LSTM-attention-LSTM), and temporal convovlution (DeepTCN). We implement several of these models for the Noah-LSM prediction task, highlighting the features and challenges for each and providing practical insight on the training process.

Mitchell Dodson↗
NASA NTRSDate not supplied

Evaluating a Cognitive Extension for the Licklider Transmission Protocol in a Spacecraft Emulation Testbed

In space communications, particularly when involving regions beyond cislunar space, the development of advanced networking solutions is essential to address the challenges posed by limited connectivity, substantial propagation delays, and radio signal variations. This study explores a data-driven approach to the Licklider Transmission Protocol (LTP), specifically focusing on dynamically adjusting the maximum payload size of segments. Prior research has emphasized the potential benefits of dynamically adjusting this parameter, introducing the concept of Cognitive LTP. This paper presents a software implementation of Cognitive LTP (CLTP) within an open-source Delay Tolerant Networking (DTN) framework, specifically the High-rate Delay Tolerant Networking (HDTN), and experimentally evaluates its performance under realistic space conditions. Leveraging the Cognitive Ground Testbed (CGT), developed by NASA GRC for spacecraft communication emulation, this study effectively bridges the gap between theoretical advancements and practical applications. By thoroughly analyzing CLTP’s functionality within the CGT, this research offers insights into the practical implications of adaptive networking strategies, emphasizing the importance of conducting tests in relevant environments for the maturation of space communication technologies.

Delay Tolerant Networking↗
NASA NTRSDate not supplied

GPS Multipath Emulation using Software Generated Signals

Depending on the environment, multipath can be one of the largest error sources contributing to degradation in Global Navigation Satellite System (GNSS) (e.g., GPS) performance. Currently, open-source tools for simulating GPS signals are available and can be used in the testing and evaluation of GPS receiver equipment. These tools can generate GPS signals that, when used by a GPS receiver, result in computation of a position solution that was pre-determined at the time of signal generation. This work utilizes a custom version of the open-source GPS-SDR-SIM to produce emulated multipath GPS signals. A proof of concept was prototyped and demonstrated using this modified version of GPS-SDR-SIM to produce GPS as well as multipath signals. The generated data was processed using a software defined GPS receiver (GNSS-SDR) and it was found that the introduction of simulated multipath signals successfully produced the expected characteristics of a composite multipath signal in simulation.

GPS↗
NASA NTRSDate not supplied

GPS Multipath Emulation using Software Generated Signals

Depending on the environment, multipath can be one of the largest error sources contributing to degradation in Global Navigation Satellite System (GNSS) (e.g., GPS) performance. Currently, open-source tools for simulating GPS signals are available and can be used in the testing and evaluation of GPS receiver equipment. These tools can generate GPS signals that, when used by a GPS receiver, result in computation of a position solution that was pre-determined at the time of signal generation. This work utilizes a custom version of the open-source GPS-SDR-SIM to produce emulated multipath GPS signals. A proof of concept was prototyped and demonstrated using this modified version of GPS-SDR-SIM to produce GPS as well as multipath signals. The generated data was processed using a software defined GPS receiver (GNSS-SDR) and it was found that the introduction of simulated multipath signals successfully produced the expected characteristics of a composite multipath signal in simulation.

GPS↗
DOE OSTI2021

Science Federation Emulation Testbed: Demonstration of VFSIE Functionalities

The Virtual Federated Science Instrument Environment (VFSIE) is a digital twin of a federated infrastructure of multiple sites with science instruments and computing systems that are geographically dispersed. It emulates the federation using containers and virtual hosts (vhosts) connected over local and wide-area networks for the main purpose of supporting the development and testing of science workflows and software stacks, which will subsequently transition to the physical infrastructure. In this demo, we present VFSIE of a four sites scenario and illustrate the following use cases: (i) execution of federation stack components that expose resources to enable a science user to execute workflows, (ii) execution of remote control commands of beam-line instruments to collect measurements and position the sensor, and (iii) remote execution and access of Jupyter Notebook for tomographic image computations

Al Najjar, Anees↗
DOE OSTI2022

Analysis on the Preliminary Gap Conductance Test with Single Primary Heat Extraction and Removal Emulator

Microreactor is a type of nuclear reactor that is intended to produce thermal energy from the micro and integrated design. Among various microreactor roadmaps, microreactor with heat pipes is one of the promising designs that under active development. At Idaho National Laboratory (INL) and supported by the Department of Energy (DOE) Microreactor Program (MRP), a Single Primary Heat Extraction and Removal Emulator (SPHERE) was developed. The main purpose of SPHRE is to understand thermal performance of heat pipe in the conjunction of heat source without using nuclear material. The heat pipe used in the SPHERE has sodium as a working fluid, with Argon gas in the vapor region, thus this heat pipe is variable conductance heat pipe (VCHP). The volume of non-condensable gas changes with power and elapsed time, so the area covered by non-condensable gas changes. This gives an effect that passively controls the cooling capability of condenser section. This preliminary experiment was intended to perform a gap conductance experiment that reveals heat transfer characteristics of gas at the gap around the heat pipe. However, there are not many experimental data that deals with heat transfer of the gas at the gap around heat pipe. In this research, the preliminary experimental result regarding to the heat pipe performance with different composition of gas at the gap, level of power is presented. The experimental data will be used for the validation study of SOCKEYE as a future plan.

42 ENGINEERING↗
DOE OSTI2022

Sensor assemblies and methods for emulating interaction of entities within water systems

Sensor assemblies are provided for use in modeling water systems. These sensor assemblies can be used as sensor fish. These assemblies can include a circuit board supporting processing circuitry components on either or both opposing component support surfaces of the circuit board and a housing above the circuit board and the components, with the housing being circular about the circuit board in at least one cross section, and wherein the supporting surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section. Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗
DOE OSTI2023

Closed Loop Testing of Microphonics Algorithms Using a Cavity Emulator

An analog crystal filter based cavity emulator is modified with reverse biased varactor diodes to provide a tuning range of around 160 Hz. The piezo drive voltage of the resonance controller is used to detune the cavity through the bias voltage. A signal conditioning and summing circuit allows the introduction of microphonics disturbance from a signal source or using real microphonics data from cavity testing. This setup is used in closed loop with a cavity controller and resonance controller to study the effectiveness of resonance control algorithms suitable for superconducting cavities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Sensor assemblies and methods for emulating interaction of entities within water systems

Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗
DOE OSTI2026

Nonlinear Information from DESI Luminous Red Galaxies: An Emulator-Based Analysis of Pre- and Post-Reconstruction Power Spectra

We present joint measurements of the pre- and post-reconstruction power spectra, $P_{\rm pre}$ and $P_{\rm post}$, together with their cross-power spectrum, $P_{\rm cross}$, for the Luminous Red Galaxies (LRGs) in the DESI Data Release 1 (DR1). We jointly analyse these observables with an emulator-based full-shape modeling framework, thereby, for the first time, we extract complementary nonlinear information from the galaxy density field before and after reconstruction in real survey data. Specifically, including $P_{\rm post}$ and $P_{\rm cross}$ in addition to $P_{\rm pre}$ (hereafter $P_{\rm all}$) yields an improvement of approximately $18$-$27\%$ in the $σ_8$ constraint in both $Λ$CDM and $w$CDM, depending on the redshift bin, relative to the $P_{\rm pre}$-only analysis with the cosmic microwave background distance priors (hereafter CMB). In $w$CDM, the joint CMB+$P_{\rm all}$ analysis can tighten the constraints on $w$ by approximately $5$-$15\%$ across the two LRG redshift bins, compared to the CMB+$P_{\rm pre}$ combination. Further incorporating the Type Ia supernova dataset and comparing the cosmological constraints in $w$CDM from each individual power-spectrum component with those from the full combination, we find that $P_{\rm all}$ consistently provides the tightest constraints. From the joint CMB+$P_{\rm all}$+DES-Dovekie dataset, we obtain $Ω_m = 0.314 \pm 0.0048$ and $w = -0.988 \pm 0.023$ for the \texttt{LRG1} sample, and $Ω_m = 0.318 \pm 0.0046$ and $w = -0.988 \pm 0.025$ for \texttt{LRG2}. These results demonstrate that combining pre- and post-reconstruction power spectra with their cross-correlation enables DESI to harvest additional nonlinear information, leading to tighter constraints on cosmological parameters.

Wang, Yuting [NAOC, Beijing; Beijing, GUCAS] (ORCI↗
DOE OSTI2021

Comparing Emulation Methods for Computer Models with High Dimensional Output

This Master’s Capstone project will present a comparison of statistical models for computer simulation studies. The four models included in this comparison study were chosen for both their proven and diverse methodologies. We will present a case study on hurricane flood data in the Delaware bay which highlights the strengths and weaknesses of each model when applied to a very large spatial field. As computers have gotten faster, we have become interested in modeling increasingly large spatial fields in both size and resolution. Statistical algorithms that are able to efficiently handle these fields have never been more important. We therefore find this comparison to be extremely topical.

42 ENGINEERING↗
NASA NTRS2015

Dynamic Emulation of NASA Missions for IVandV: A Case Study of JWST and SLS

Software-Only-Simulations are an emerging but quickly developing field of study throughout NASA. The NASA Independent Verification Validation (IVV) Independent Test Capability (ITC) team has been rapidly building a collection of simulators for a wide range of NASA missions. ITC specializes in full end-to-end simulations that enable developers, VV personnel, and operators to test-as-you-fly. In four years, the team has delivered a wide variety of spacecraft simulations ranging from low complexity science missions such as the Global Precipitation Management (GPM) satellite and the Deep Space Climate Observatory (DSCOVR), to the extremely complex missions such as the James Webb Space Telescope (JWST) and Space Launch System (SLS).

Emulation↗
NASA NTRS2016

Light Microscopy Module (LMM)-Emulator

The Light Microscopy Module (LMM) is a microscope facility developed at Glenn Research Center (GRC) that provides researchers with powerful imaging capability onboard the International Space Station (ISS). LMM has the ability to have its hardware recongured on-orbit to accommodate a wide variety of investigations, with the capability of remotely acquiring and downloading digital images across multiple levels of magnication.

LMM Emulator↗