Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Emulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Sensor assemblies and methods for emulating interaction of entities within water systems

Sensor assemblies are provided for use in modeling water systems. These sensor assemblies can be used as sensor fish. These assemblies can include a circuit board supporting processing circuitry components on either or both opposing component support surfaces of the circuit board and a housing above the circuit board and the components, with the housing being circular about the circuit board in at least one cross section, and wherein the supporting surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section. Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗

Closed Loop Testing of Microphonics Algorithms Using a Cavity Emulator

An analog crystal filter based cavity emulator is modified with reverse biased varactor diodes to provide a tuning range of around 160 Hz. The piezo drive voltage of the resonance controller is used to detune the cavity through the bias voltage. A signal conditioning and summing circuit allows the introduction of microphonics disturbance from a signal source or using real microphonics data from cavity testing. This setup is used in closed loop with a cavity controller and resonance controller to study the effectiveness of resonance control algorithms suitable for superconducting cavities.

43 PARTICLE ACCELERATORS↗

Sensor assemblies and methods for emulating interaction of entities within water systems

Methods for emulating interaction of entities within water systems are provided. The methods can include introducing a sensor assembly into a water system. The sensor assembly can include: a circuit board supporting processing circuitry components on either or both of opposing component support surfaces of the circuit board; a housing about the circuit board and the components, the housing being circular about the circuit board in at least one cross section; and wherein the support surfaces of the circuit board are substantially parallel with the plane of the housing in the one cross section.

Deng, Z. Daniel↗

Nonlinear Information from DESI Luminous Red Galaxies: An Emulator-Based Analysis of Pre- and Post-Reconstruction Power Spectra

We present joint measurements of the pre- and post-reconstruction power spectra, $P_{\rm pre}$ and $P_{\rm post}$, together with their cross-power spectrum, $P_{\rm cross}$, for the Luminous Red Galaxies (LRGs) in the DESI Data Release 1 (DR1). We jointly analyse these observables with an emulator-based full-shape modeling framework, thereby, for the first time, we extract complementary nonlinear information from the galaxy density field before and after reconstruction in real survey data. Specifically, including $P_{\rm post}$ and $P_{\rm cross}$ in addition to $P_{\rm pre}$ (hereafter $P_{\rm all}$) yields an improvement of approximately $18$-$27\%$ in the $σ_8$ constraint in both $Λ$CDM and $w$CDM, depending on the redshift bin, relative to the $P_{\rm pre}$-only analysis with the cosmic microwave background distance priors (hereafter CMB). In $w$CDM, the joint CMB+$P_{\rm all}$ analysis can tighten the constraints on $w$ by approximately $5$-$15\%$ across the two LRG redshift bins, compared to the CMB+$P_{\rm pre}$ combination. Further incorporating the Type Ia supernova dataset and comparing the cosmological constraints in $w$CDM from each individual power-spectrum component with those from the full combination, we find that $P_{\rm all}$ consistently provides the tightest constraints. From the joint CMB+$P_{\rm all}$+DES-Dovekie dataset, we obtain $Ω_m = 0.314 \pm 0.0048$ and $w = -0.988 \pm 0.023$ for the \texttt{LRG1} sample, and $Ω_m = 0.318 \pm 0.0046$ and $w = -0.988 \pm 0.025$ for \texttt{LRG2}. These results demonstrate that combining pre- and post-reconstruction power spectra with their cross-correlation enables DESI to harvest additional nonlinear information, leading to tighter constraints on cosmological parameters.

Wang, Yuting [NAOC, Beijing; Beijing, GUCAS] (ORCI↗

Emulation of fast reactor irradiated T91 using dual ion beam irradiation

In this work, dual ion irradiations using 5 MeV defocused Fe 2+ ions and co-injected He 2+ ions were conducted on a ferritic-martensitic steel alloy, T91, in the temperature range of 406 °C–570 °C over a damage range of 14.6–35 dpa followed by characterization of the microstructure using transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM). Dislocation loops were observed to increase in diameter and decrease in density with temperature until only network dislocations were observed at the highest temperatures of 520 °C and 570 °C. Swelling exhibited the expected bell-shaped trend with temperature following the number density of cavities, peaking at 460 °C and with a bimodal size distribution except at 520 °C and 570 °C. Nickel- and silicon-rich clusters formed under dual ion irradiations near the surface at all but the highest temperatures of 520 °C and 570 °C. Very little Cr and Si segregation was observed at lath boundaries while Ni enriched at all temperatures examined. Segregation of Cr and Ni appeared to saturate by 17 dpa, while Si enriched up to 35 dpa. The dislocation and cavity microstructures of dual ion irradiated T91 and T91 irradiated in the BOR-60 fast reactor matched extremely well using a temperature shift of +60–70 °C. However, segregation to grain boundaries and formation of nickel-silicon rich clusters were minimal in the dual ion irradiated T91 and less than that in T91 irradiated in the BOR-60 fast reactor.

36 MATERIALS SCIENCE↗

Comparing Emulation Methods for Computer Models with High Dimensional Output

This Master’s Capstone project will present a comparison of statistical models for computer simulation studies. The four models included in this comparison study were chosen for both their proven and diverse methodologies. We will present a case study on hurricane flood data in the Delaware bay which highlights the strengths and weaknesses of each model when applied to a very large spatial field. As computers have gotten faster, we have become interested in modeling increasingly large spatial fields in both size and resolution. Statistical algorithms that are able to efficiently handle these fields have never been more important. We therefore find this comparison to be extremely topical.

42 ENGINEERING↗

Squeezing a Prism into a Surface: Emulating Bulk Optics with Achromatic Metasurfaces

Metasurfaces promise to replace bulky prisms and lenses with 2D surfaces, revolutionizing wavefront control with technologically significant advantages in size, weight, and planar fabrication. However, conventional implementations suffer from large chromatic aberrations and cannot sustain performance over practical bandwidths of real-world signals because of the limited phase modulation margin available in a surface. How can an infinitely thin surface generate the arbitrarily large, broadband phase delay that bulk phase accumulation can provide? Here, equivalence between bulk optics and certain multiresonant metasurfaces is demonstrated, where phase delay arises from trains of multiple resonances in the effective sheet conductivities of the surface itself instead of accumulation of propagation phase. The fundamentally required electromagnetic surface conductivities of a purely achromatic metasurface are derived and general design rules for arbitrarily broadband beam steering and lensing are obtained. Both operation in transmission and reflection can be achieved in a unified way by proper alignment of the resonances, enabling 360° directionality. The arbitrary spectral bandwidth, dual reflection/transmission operation, and complete dispensability of propagation phase constitute a major advance in the state of the art of achromatic metasurfaces for wavefront manipulation.

36 MATERIALS SCIENCE↗

Emulation of Synaptic Plasticity in WO 3 ‐Based Ion‐Gated Transistors

Neuromorphic systems, inspired by the human brain, promise significant advancements in computational efficiency and power consumption by integrating processing and memory functions, thereby addressing the von Neumann bottleneck. This paper explores the synaptic plasticity of a WO3-based ion-gated transistor (IGT) in [EMIM][TFSI] and a 0.1 mol L −1 LiTFSI in [EMIM][TFSI] for neuromorphic computing applications. Cyclic voltammetry (CV), transistor characteristics, and atomic force microscopy (AFM) force–distance (FD) profiling analyses reveal that Li + brings about ion intercalation, together with higher mobility and conductance, and slower response time (τ). WO 3 IGTs exhibit spike amplitude-dependent plasticity (SADP), spike number-dependent plasticity (SNDP), spike duration-dependent plasticity (SDDP), frequency-dependent plasticity (FDP), and paired-pulse facilitation (PPF), which are all crucial for mimicking biological synaptic functions and understanding how to achieve different types of plasticity in the same IGT. The findings underscore the importance of selecting the appropriate ionic medium to optimize the performance of synaptic transistors, enabling the development of neuromorphic systems capable of adaptive learning and real-time processing, which are essential for applications in artificial intelligence (AI).

36 MATERIALS SCIENCE↗

Emulation of complex open quantum systems using superconducting qubits

With quantum computers being out of reach for now, quantum simulators are alternative devices for efficient and accurate simulation of problems that are challenging to tackle using conventional computers. Quantum simulators are classified into analog and digital, with the possibility of constructing “hybrid” simulators by combining both techniques. Here we focus on analog quantum simulators of open quantum systems and address the limit that they can beat classical computers. In particular, as an example, we discuss simulation of the chlorosome light-harvesting antenna from green sulfur bacteria with over 250 phonon modes coupled to each electronic state. Furthermore, we propose physical setups that can be used to reproduce the quantum dynamics of a standard and multiple-mode Holstein model. The proposed scheme is based on currently available technology of superconducting circuits consist of flux qubits and quantum oscillators.

97 MATHEMATICS AND COMPUTING↗

Emulating the impact of additional proton-proton interactions in the ATLAS simulation by pre-sampling sets of inelastic Monte Carlo events

The accurate simulation of additional interactions at the ATLAS experiment for the analysis of proton-proton collisions delivered by the Large Hadron Collider presents a significant challenge to the computing resources. During the LHC Run (2015-2018) there were up to 70 inelastic interactions per bunch crossing, which need to be accounted for in Monte Carlo (MC) production. In this document, a new method to account for these additional interactions in the simulation chain is described. Instead of sampling the inelastic interactions and adding their energy deposits to a hard-scatter interaction one-by-one, the inelastic interactions are presampled, independent of the hard scatter, and stored as combined events. Consequently, for each hard-scatter interaction only one such presampled event needs to be added as part of the simulation chain. For the Run 2 simulation chain, with an average of 35 interactions per bunch crossing, this new method provides a substantial reduction in MC production CPU needs of around 20%, while reproducing the properties of the reconstructed quantities relevant for physics analyses with good accuracy.

97 MATHEMATICS AND COMPUTING↗

Urban morphology from a landscape perspective: How building morphology distribution land models (BMDLM) emulate pattern and process

Urban form (e.g., building morphology such as height or footprint) can be used to predict environmental footprints, such as energy/water consumption and carbon emissions. Although progress has been made in predicting building characteristics to fill gaps in observation or derive 3-D representations, the relationships between morphology and other variables such as land use and population are poorly understood. Understanding these relationships may enable projections for how cities will evolve with landscapes in the future. A suite of random forest models, the Building Morphology Distribution Land Models (BMDLM), was developed to determine how well building morphology for two distinct statistical measures (central tendency and frequency) can be predicted using land use (e.g., zoning) and population at different resolutions. Clark County, Nevada and Los Angeles County, California are explored as case studies. Generally, 1-km models outperformed 30-m models. Frequency distribution models had the best performance, especially in LA County. Frequency models significantly outperformed spatial autocorrelative models using inverse distance weighting (IDW). BMDLM offers a new take on modeling urban form in which generalized landscape patterns are characterized to understand the influence of population and zoning on urban development, as described by urban scaling theory.

Sturtevant, Jillian [Baylor Univ., Waco, TX (Unite↗