Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Stable High‐Conductivity Ethylenedioxythiophene Polymers via Borane‐Adduct Doping

Efficient doping of polymer semiconductors is required for high conductivity and efficient thermoelectric performance. Lewis acids, e.g., B(C 6 F 5 ) 3 , have been widely employed as dopants, but the mechanism is not fully understood. 1:1 “Wheland type” or zwitterionic complexes of B(C 6 F 5 ) 3 are created with small conjugated molecules 3,6-bis(5-(7-(5-methylthiophen-2-yl)-2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)thiophen-2-yl)-2,5-dioctyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione [oligo_DPP(EDOT) 2 ] and 3,6-bis(5''-methyl-[2,2':5',2''-terthiophen]-5-yl)-2,5-dioctyl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione [oligo_DPP(Th) 2 ]. Using a wide variety of experimental and computational approaches, the doping ability of these Wheland Complexes with B(C 6 F 5 ) 3 are characterized for five novel diketopyrrolopyrrole-ethylenedioxythiophene (DPP-EDOT)-based conjugated polymers. The electrical properties are a strong function of the specific conjugated molecule constituting the adduct, rather than acidic protons generated via hydrolysis of B(C 6 F 5 ) 3 , serving as the oxidant. It is highly probable that certain repeat units/segments form adduct structures in p -type conjugated polymers which act as intermediates for conjugated polymer doping. Electronic and optical properties are consistent with the increase in hole-donating ability of polymers with their cumulative donor strengths. The doped film of polymer (DPP(EDOT) 2 -(EDOT) 2 ) exhibits exceptionally good thermal and air-storage stability. The highest conductivities, ≈300 and ≈200 S cm -1 , are achieved for DPP(EDOT) 2 -(EDOT) 2 doped with B(C 6 F 5 ) 3 and its Wheland complexes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The Key Role of Grain Boundary Dynamics in Revolutionizing the Potential of Solid Electrolytes

Solid electrolytes (SEs) have the potential to enhance the safety and performance of Li-metal batteries. However, the existence of grain boundaries in polycrystalline SEs presents a significant challenge for both ionic and electronic migration, promoting the propagation of detrimental lithium dendrites. This study compares the roles of grain boundaries in electrical properties of three distinct SEs including garnet-type Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZO), argyrodite-type Li 6 PS 5 Cl (LPSC), and NASICON-type Li 1+x+y Al x (Ti,Ge) 2-x Si y P 3-y O 12 (LATP). Results demonstrate that the electronic and ionic conductivities of solid-state electrolytes are affected differently by grain boundaries, depending on the specific type of electrolyte. For instance, LLZO and LATP experience dielectric breakdown at 3.7 and 5.3 V, respectively, while LPSC does not exhibit such behavior. Here, a new chemical modification is proposed that simultaneously alters the composition of both the surface and grain boundaries of SEs, ultimately reducing electronic conductivity for the LLZO SEs. Consequently, the proposed LLZO exhibits unprecedented dendrite-free cycling stability, achieving a remarkable 12 000-h lifetime at room temperature, surpassing conventional strategies such as surface coatings in dendrite mitigation. This study highlights the significance of modifying grain boundaries to design safe and durable Li-metal batteries. It provides new insights for developing SEs that are highly resistant to dendrite formation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hole-Trapping-Induced Stabilization of Ni 4+ in SrNiO 3 /LaFeO 3 Superlattices

Creating new functionality in materials containing transition metals is predicated on our ability to control the associated charge states. For a given metal, forming lower oxidation states is typically easier than generating higher values, and there is an upper limit on valence that is not exceeded under normal conditions. Here we demonstrate that we can exceed the normal upper limit of 3+ for Ni and Fe via synthesis of (SrNiO 3 )m/(LaFeO 3 )n superlattices by tuning n and m. The Goldschmidt tolerance constraints are lifted and SrNi 4+ O 3 with holes on adjacent O anions can be stabilized as a perovskite at the single unit cell level (m = 1). Spectroscopy reveals that the n = 1 superlattice contains Ni 3+ and Fe 4+ , whereas Ni 4+ and Fe 3+ are observed in the n = 5 superlattice. Here, our results show that the B-site cation valences can be tuned by controlling the magnitude of the FeO6 octahedral rotations which in turn drive the energy balance between Ni 3+ /Fe 4+ and Ni 4+ /Fe 3+ , thus controlling emergent electrical properties such as the band alignment and resulting hole confinement. We suggest that this approach may be generally useful for synthesizing novel, metastable layered structures with new functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Transparent and Conductive Polyimide‐Ionene Hybrid Interlayers for High Performance and Cost‐Effective Semitransparent Organic Solar Cells

The contradiction between high transmittance and favorable conductivity poses a great challenge in developing effective cathode interlayer (CIL) materials with sufficient thickness tolerance, which hinders the further advancement of organic solar cells (OSCs). Herein, a completely new class of alcohol processable polyimide-ionene hybrids (PIIHs) is proposed by melding pyromellitic diimide (PMD) subunits into imidazolium-based ionenes backbone covalently. These PIIHs, named PMD-DI and PMD-PD, boast high transparency, suitable energy levels, and decent conductivity. A higher PMD content endows PMD-PD with improved work function tunability, electrical properties, and crystallinity, enabling PMD-PD as CIL material with excellent thickness-insensitive characteristics, while simultaneously improving device stability significantly. Furthermore, PMD-PD also exhibits good compatibility with various electrodes and active layers, offering solar cell efficiencies of up to 19.91% and 19.29% with Ag and Cu cathodes, respectively. More importantly, the application of PMD-PD can improve the performance of semi-transparent OSCs without losing transmittance, thereby drastically enhancing the light utilization efficiency to 4.04% with an ultrathin, low-cost Cu cathode, that competes with leading optical modulation-free semitransparent OSCs with expensive Ag cathodes. This work opens a pathway to realize transparent and conductive interlayers by strategic molecular design, leading to highly efficient, stable, and cost-effective OSCs suitable for diverse applications.

You, Zuhao↗
DOE OSTI2022

Electronic Topological Transition as a Route to Improve Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3

The electronic structure near the Fermi surface determines the electrical properties of the materials, which can be effectively tuned by external pressure. Bi0.5Sb1.5Te3 is a p-type thermoelectric material which holds the record high figure of merit at room temperature. Here it is examined whether the figure of merit of this model system can be further enhanced through some external parameter. With the application of pressure, it is surprisingly found that the power factor of this material exhibits λ behavior with a high value of 4.8 mW m –1 K –2 at pressure of 1.8 GPa. Such an enhancement is found to be driven by pressure-induced electronic topological transition, which is revealed by multiple techniques. Together with a low thermal conductivity of about 0.89 W m –1 K –1 at the same pressure, a figure of merit of 1.6 is achieved at room temperature. The results and findings highlight the electronic topological transition as a new route for improving the thermoelectric properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Revealing the Electrophilic‐Attack Doping Mechanism for Efficient and Universal p‐Doping of Organic Semiconductors

Abstract Doping is of great importance to tailor the electrical properties of semiconductors. However, the present doping methodologies for organic semiconductors (OSCs) are either inefficient or can only apply to some OSCs conditionally, seriously limiting their general applications. Herein, a novel p‐doping mechanism is revealed by investigating the interactions between the dopant trityl tetrakis(pentafluorophenyl) borate (TrTPFB) and poly(3‐hexylthiophene) (P3HT). It is found that electrophilic attack of the trityl cations on thiophenes results in the formation of tritylated thiophenium ions, which subsequently induce electron transfer from neighboring P3HT chains to realize p‐doping. This unique p‐doping mechanism enables TrTPFB to p‐dope various OSCs including those with high ionization energy (IE ≈ 5.8 eV). Moreover, this doping mechanism endows TrTPFB with strong doping capability, leading to doping efficiency of over 80% in P3HT. The discovery and elucidation of this novel doping mechanism not only points out that strong electrophiles are a class of efficient p‐dopants for OSCs, but also provides new opportunities toward highly efficient doping of various OSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Direct‐Write Printed Contacts to Layered and 2D Materials

Advancements in fabrication methods have shaped new computing device technologies. Among these methods, depositing electrical contacts to the channel material is fundamental to device characterization. Novel layered and 2D materials are promising for next-generation computing electronic channel materials. Direct-write printing of conductive inks is introduced as a surprisingly effective, significantly faster, and cleaner method to contact different classes of layered materials, including graphene (semi-metal), MoS 2 (semiconductor), Bi-2212 (superconductor), and Fe 5 GeTe 2 (metallic ferromagnet). Based on the electrical response, the quality of the printed contacts is comparable to what is achievable with resist-based lithography techniques. These devices are tested by sweeping gate voltage, temperature, and magnetic field to show that the materials remain pristine post-processing. This work demonstrates that direct-write printing is an agile method for prototyping and characterizing the electrical properties of novel layered materials.

2D materials↗
DOE OSTI2024

Ionic Thermoelectric Generators in Vertical and Planar Topologies Based on Fluorinated Polymer Hybrid Materials with Ionic Liquids

Abstract Ionic thermoelectrics (TEs), in which voltage generation is based on ion migration, are suitable for applications based on their low cost, high flexibility, high ionic conductivity, and wide range of Seebeck coefficients. This work reports on the development of ionic TE materials based on the poly(vinylidene fluoride‐trifluoroethylene), Poly(VDF‐co‐TrFE), as host polymer blended with different contents of the ionic liquid, IL, 1‐ethyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI]. The morphology, physico‐chemical, thermal, mechanical, and electrical properties of the samples are evaluated together with the TE response. It is demonstrated that the IL acts as a nucleating agent for polymer crystallization. The mechanical properties and ionic conductivity values are dependent on the IL content. A high room temperature ionic conductivity of 0.008 S cm −1 is obtained for the sample with 60 wt% of [EMIM][TFSI] IL. The TE properties depend on both IL content and device topology‐vertical or planar‐the largest generated voltage range being obtained for the planar topology and the sample with 10 wt% of IL content, characterized by a Seebeck coefficient of 1.2 mV K −1 . Based on the obtained maximum power density of 4.9 µW m −2 , these materials are suitable for a new generation of TE devices.

Pereira, Nelson↗
DOE OSTI2021

Alignment frustration in block copolymer films with block copolymer grafted TiO 2 nanoparticles under soft-shear cold zone annealing

Block copolymers (BCPs) have received significant attention as promising candidates for sequestering nanoparticles and fabrication of aligned nanostructures with optimal optical or electrical properties. We investigate the influence of static and dynamic thermal field on the alignment of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) BCP morphology with the loading of novel poly(methyl methacrylate-block-Polystyrene) (PMMA-b-PS)-grafted-TiO 2 nanoparticles (BCP-g-TiO 2 ). Observation of characteristics IR peaks for PMMA and PS in BCP-g-TiO 2 nanoparticles and Transmission Electron Microscopy (TEM) results of the outer coating of core nanoparticle, validate the grafting to approach in synthesizing BCP-g-TiO 2 . In this work, we report that under the sharp dynamic thermal field, at low loading of BCP-g-TiO 2 , there is good dispersion of nanoparticles in unidirectionally aligned BCP matrix in film interior probed by GISAXS, while, at high nanoparticle loading (~10 wt%), there is local frustration in the unidirectional alignment of the BCP matrix due to aggregation of BCP-g-TiO 2 nanoparticles. However, Grazing incidence small angle X-ray scattering (GISAXS) shows clearly that the BCP films remain largely locally ordered at the domain scale, despite these large perturbations to long-range ordering even at high loading level, while bringing in new TiO 2 functionality to the BCP films, such as UVO absorptivity or biofouling prevention, important to potential new applications of such membranes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

In Situ Characterization of Ferroelectric HfO 2 During Rapid Thermal Annealing

Thermal annealing is critical in governing the phase distribution, and ultimately the electrical properties, of ferroelectric hafnium oxide films. In particular, rapid thermal annealing (RTA) has been shown to favor the formation of ferroelectric crystal phases, but the dynamic behavior of the film over the course of the anneal is not well understood. Herein, synchrotron X-ray diffraction is used to characterize the phase distribution of HfO 2 films deposited by atomic layer deposition (ALD) in situ during RTA, revealing complex phase transformations occurring on the scale of seconds. All samples investigated here transform into a nonmonoclinic phase, which is required for ferroelectric films. However, this phase often converts into the more stable monoclinic phase as annealing proceeds. The kinetic barrier to the transformation to the monoclinic phase during heating is higher than 1 eV f.u. -1 In this work, the initial crystallization into the ferroelectric phase and relatively high barrier to transformation to the nonferroelectric phase suggests that careful control of the thermal annealing profile can greatly increase the ferroelectric fraction of the film. By using a fast ramp rate and a short annealing time above the ferroelectric crystallization temperature, the remanent polarization of a pure HfO 2 film can be increased more than twofold.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Pyrrole Modified 3,4‐Propylenedioxythiophene Conjugated Polymer as Hole Transport Layer for Efficient and Stable Perovskite Solar Cells

Despite the outstanding electric properties and cost-effectiveness of poly(3,4-ethylenedioxythiophene) (PEDOT) and its derivatives, their performance as hole transport layer (HTL) materials in conventional perovskite solar cells (PSCs) has lagged behind that of widely used spirobifluorene-based molecules or poly(triaryl amine). This gap is mainly from their poor solubility and energy alignment mismatch. In this work, the design and synthesis of a pyrrole-modified HTL (PPr) based on 3,4-propylenedioxythiophene (ProDOT) are presented for efficient and stable PSCs. As a result of the superior defects passivation ability, excellent contact with perovskite, enhanced hole extraction, and high hydrophobicity, the unencapsulated PPr-based PSCs showed the peak PCE of 21.49% and outstanding moisture stability (over 4000 h). This work highlights the potential application of ProDOT-based materials as HTL for PSCs and underscores the importance of the rational design of PEDOT and its derivatives.

14 SOLAR ENERGY↗
DOE OSTI2021

Super Flexible Transparent Conducting Oxide-Free Organic–Inorganic Hybrid Perovskite Solar Cells with 19.01% Efficiency (Active Area=1 cm 2 )

Highly efficient organic-inorganic hybrid perovskite solar cells (OIHP-SCs) are often fabricated on a transparent conducting oxide (TCO) substrate such as indium tin oxide (ITO). However, the presence of TCOs is disadvantageous to the development of flexible OIHP-SCs due to the brittle nature of ITO which is easily breakable during bending. Herein, a flexible TCO-free OIHP-SC is demonstrated by using lithium bis(trifluoromethane)sulfonimide (Li-TFSI) as a codopant for the single-layer graphene transparent conducting electrode and poly(triarylamine) hole-transporting material (HTM) on a flexible polydimethylsiloxane substrate. The optical and electrical properties of the Li-TFSI-doped graphene substrate are measured by controlling the doping amount and the best conditions for charge extraction are established at a doping concentration of 20 mm Li-TFSI, thus optimizing the device photovoltaic performance. As a result, a highest power conversion efficiency of 19.01% is demonstrated by the flexible TCO-free OIHP-SC devices with an active area of 1 cm 2 . In addition, the flexible TCO-free OIHP-SCs exhibit good bending stability after 5000 bending cycles at radii of 6, 4, and 2 mm and excellent light soaking stability under 1 Sun light intensity over 1000 h as opposed to the poor stability when using poly(3,4-ethylenedioxythiophene) polystyrene sulfonate as the HTM.

14 SOLAR ENERGY↗
DOE OSTI2024

Analysis of the turbostratic structures in PAN-based carbon fibers with wide-angle x-ray diffraction

Carbon fiber (CF) is a versatile material renowned for its excellent mechanical, thermal, and electrical properties. Polyacrylonitrile (PAN)-based CFs dominate the market due to their high tensile strength, rendering them suitable for structural applications in a wide variety of applications ranging from sporting goods to aerospace. Over five decades of commercial development of PAN-based CF has resulted in a range of varieties with different tensile moduli and tensile strengths. The microstructures, nanostructures, and crystal structures of PAN-based CF play pivotal roles in the macroscale properties of this material. In particular, the crystal structure and crystallite orientation in CF is closely related to the mechanical properties. The crystal structure of PAN-based CF generally consists of turbostratic carbon, which is a disordered form of graphite, the characteristics of which can be effectively characterized in a bulk format through wide-angle x-ray diffraction (WAXD). In this work, we employed a three-part approach to the analysis of WAXD patterns collected from four intermediate modulus PAN-based CFs. The approach incorporates a Scherrer analysis, a Debye analysis, and an orientational analysis to provide precise estimates of crystallite sizes, crystallite distributions, and crystallite orientations with the fiber axis. Furthermore, the results presented here suggest that intermediate modulus PAN-based CF mostly consists of small turbostratic crystallites (<4 nm), with larger crystallites having increased orientation with the fiber axis. The results here imply the presence of curvature and/or wrinkling of the turbostratic layers within the CF structure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Inkless, dry printing nanographene via in-Situ Coordinated laser ablation and sintering processes

Printing carbon, such as graphene and other carbon structures, for flexible and printed electronics currently relies on either ink-based printing, laser-induced forward transfer (LIFT), or laser-induced graphitization (LIG) to convert carbon-rich precursor materials, such as polymers, to graphene-like carbon structures. Liquid inks contain toxic solvents, surfactants, and stabilizing additives that degrade electrical conductivity and require high-temperature post-processing. On the other hand, LIG is limited by the substrate. Here, this study introduces an additive manufacturing method for dry-printing carbon nanomaterials, ranging from amorphous carbon to crystalline graphene-like structures, on various substrates. The system utilizes laser ablation of a solid graphite target to create pure carbon nanoparticles in situ and on demand. An inert gas carries the nanoparticles onto the substrate, where they can be deposited either as amorphous structures or laser-sintered in real time to form various graphitic structures. The study of laser processing parameters, specifically fluence and pulse repetition frequency, revealed three unique regimes of nanostructure evolution that influence the morphological and electrical properties of these printed structures. Raman spectroscopy confirmed graphitization with a resistivity slightly higher than that of the bulk graphite target. The conductivity/resistivity could be tuned as a function of sintering laser power. Scanning transmission electron microscopy (STEM) revealed that turbostratic nanographene formed with an interlayer spacing of 0.40 nm. Despite ink-based printing methods, such as screen printing, inkjet printing (IJP), and aerosol jet printing (AJP), this eco-friendly and green manufacturing technique could eliminate toxic chemicals, reduce environmental impact, and enable single-step fabrication of carbon-based devices for applications in wearable sensors, energy storage, flexible electronics, and Internet of Things (IoT) devices.

Additive nanomanufacturing↗
DOE OSTI2023

Buried interface modulation via $\mathrm{PEDOT:PSS}$ ionic exchange for the Sn-Pb mixed perovskite based solar cells

To apply Sn-Pb mixed perovskite solar cells for highly efficient single- or multi-junction devices, understanding device-specific buried interfaces is necessary. Poly [3,4-ethylenedioxythiophene]:poly[styrene sulfonate] (PEDOT:PSS) is primarily used as a hole transport layer in Sn-Pb mixed perovskite solar cells. However, the spatial heterogeneity of PEDOT:PSS, caused by its PEDOT-rich and PSS-rich domains, induces many defects at the buried interface in PEDOT:PSS/perovskite, which limits device performance. Here, we present ionic exchange (IE) of PEDOT:PSS via a combination of methylamine iodide (MAI) and dimethyl sulfoxide (DMSO). Through surface analyses and density functional theory (DFT) simulations, we confirm that the IE process preferentially form PEDOT-I and MA-PSS and that PSS-rich domains bind to DMSO. Thus, the spatial separation of PEDOT:PSS is solved, and the exchanged MA + and I - ions serve as a bridge between PEDOT:PSS and the perovskite, leading to improved physical, chemical, and electrical properties of the buried interface. The Sn-Pb mixed perovskite solar cells using IE-PEDOT:PSS achieve an improved efficiency of 21.3% with an open-circuit voltage of 0.85 V and show better long-term stability. Additionally, IE-PEDOT:PSS works effectively in 2-terminal all-perovskite tandem devices, resulting in an improved efficiency of 23.5% and high reproducibility.

14 SOLAR ENERGY↗
DOE OSTI2021

Review of additive manufacturing and densification techniques for the net- and near net-shaping of geometrically complex silicon nitride components

Silicon nitride (Si 3 N 4 ) is an advantageous material due its unique combination of mechanical, thermal, chemical, and electrical properties both at ambient and elevated temperatures. Because of these properties there are a wide range of applications for Si 3 N 4 components. Applications include heat exchangers, environmental barrier coatings, osteointegration scaffolds, radomes, and integrated circuitry. Furthermore, such applications often require geometric complexity for efficient and/or effective operation. However, traditional ceramics processing methods such as hot-pressing or die extrusion are typically limited to simple axis-symmetric shapes. With the advent of additive manufacturing, there has been significant advancement into the forming of geometrically complex Si 3 N 4 components. This review documents additive manufacturing advancements that have demonstrated, or are capable of, fabricating Si 3 N 4 components with complex geometry.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of Charge Transport Layers on Capacitance Measured in Halide Perovskite Solar Cells

Capacitance-based techniques were previously used to measure the electrical properties of halide perovskite solar cells (PSCs) such as defect activation energy and density, carrier concentration, and dielectric constant, which provide key information for evaluating the device performance. Herein, we show that capacitance-based techniques cannot be used to reliably analyze the properties of defects in the perovskite layer or at its interface, since the high-frequency capacitance signature is due to the response of charge carriers in the hole-transport layer (HTL). For HTL-free PSCs, the high-frequency capacitance can be considered as the geometric capacitance for analyzing the dielectric constant of the perovskite layer, since there is no trapping and de-trapping of charge carriers in the perovskite layer. We also find that the low-frequency capacitance signature can be used to calculate the activation energy of the ionic conductivity of the perovskite layer, but the overlapping effects with charge transport materials must be avoided.

14 SOLAR ENERGY↗