Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Martensite decomposition during rapid heating of Ti-6Al-4V studied via in situ synchrotron X-ray diffraction

Martensite, α‘, commonly appears in Ti-6Al-4V upon rapid cooling from above the β-transus temperature. It is known that α‘ decomposes into α and β at high temperatures but well below the β-transus temperature. Here, we study the decomposition of martensitic Ti-6Al-4V under rapid laser heating, employing in situ synchrotron X-ray diffraction. A comparison is made with post-annealed Ti-6Al-4V under heating to elucidate changes without martensite decomposition. The fast acquisition of X-ray diffraction data at 250 Hz temporally resolves the decomposition process initiated by annihilating dislocations in α‘. The recovery process is accompanied by structural changes in martensite, followed by the phase transformation to β. Thermal profiles estimated from the lattice parameter data reveal the influence of heating rates and dislocation densities on the decomposition process. Throughout the analysis of the diffraction profiles with respect to estimated temperature, we propose a straightforward method for approximating the initiation temperature of martensite decomposition.

42 ENGINEERING↗

High Quality GaAs Growth by MBE on Si Using GeSi Buffers and Prospects for Space Photovoltaics

III-V solar cells on Si substrates are of interest for space photovoltaics since this would combine high performance space cells with a strong, lightweight and inexpensive substrate. However, the primary obstacles blocking III-V/Si cells from achieving high performance to date have been fundamental materials incompatabilities, namely the 4% lattice mismatch between GaAs and Si, and the large mismatch in thermal expansion coefficient. In this paper, we report on the molecular beam epitaxial (MBE) growth and properties of GaAs layers and single junction GaAs cells on Si wafers which utilize compositionally graded GeSi Intermediate buffers grown by ultra-high vacuum chemical vapor deposition (UHVCVD) to mitigate the large lattice mismatch between GaAs and Si. Ga As cell structures were found to incorporate a threading dislocation density of 0.9-1.5 x 10 (exp 6) per square centimeter, identical to the underlying relaxed Ge cap of the graded buffer, via a combination of transmission electron microscopy, electron beam induced current, and etch pit density measurements. AlGaAs/GaAs double heterostructures wre grown on the GeSi/Si substrates for time-resolved photoluminescence measurements, which revealed a bulk GaAs minority carrier lifetime in excess of 10 ns, the highest lifetime ever reported for GaAs on Si. A series of growth were performed to ass3ss the impact of a GaAs buffer to a thickness of only 0.1 micrometer. Secondary ion mass spectroscopy studies revealed that there is negligible cross diffusion of Ga, As and Ge at he III-V/Ge interface, identical to our earlier findings for GaAs grown on Ge wafers using MBE. This indicates that there is no need for a buffer to "bury" regions of high autodopjing,a nd that either pn or np configuration cells are easily accomodated by these substrates. Preliminary diodes and single junction Al Ga As heteroface cells were grown and fabricated on the Ge/GeSi/Si substrates for the first time. Diodes fabricated on GaAs, Ge and Ge/GeSi/Si substrate show nearly identical I-V characteristics in both forward and reverse bias regions. External quantum efficiencies of AlGaAs/GaAs cell structures grown on Ge/GeSi/Si and Ge substrates demonstrated nearly identical photoresponse, which indicates that high lifetimes, diffusion lengths and efficient minority carrier collection is maintained after complete cell processing.

Carlin, J. A.↗

Adsorption Properties of Au−Ni Surface Alloys with a Nonstoichiometric Moiré Structure: A Density Functional Theory Study

Due to the large lattice mismatch between gold and nickel, gold–nickel surface alloys can form unique nonstoichiometric overlayer structures characterized by a moiré pattern and subsurface defects. For this work, we performed density functional theory (DFT) calculations to study the adsorption of molecular oxygen, atomic hydrogen, and atomic carbon on a gold–nickel(111) surface alloy with 0.46 monolayer gold randomly distributed in the surface layer. We observed six distinct adsorption structures for molecular oxygen characterized by intramolecular stretching frequencies of <700, 729, 795, 857, 929, and 1004 cm –1 , which describe well the experimentally observed high-resolution electron energy-loss spectra. Surface atomic hydrogen adsorption is associated with adsorbate–surface modes in the ∼1000 cm –1 range, while subsurface hydrogen can have features as low as ∼400 cm –1 . We observed a unique adsorption structure for atomic carbon inside the surface dislocation loop defect, which explains the experimentally observed low carbon-surface mode at ∼340 cm –1 . Our study sheds light on the unique adsorption properties of the gold–nickel surface alloys and helps with rationalizing vibrational frequency experimental studies for this system.

adsorption↗

A closer look at spin textures

Here, Lorentz electron ptychography, a coherent diffractive imaging method, unveils magnetization singularities in a skyrmion lattice in FeGe and captures subtle internal structures near the skyrmion cores, boundaries, and dislocations.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructure Clones

Microstructure drives component behavior. Contemporary crystal plasticity studies compare strain measurements of polycrystal specimens to models. Because each specimen is unique, it is impossible to know which differences are significant. In this project, we invented microstructure clones and explored their use in understanding crystal plasticity. Microstructure clones are specimens with nearly identical microstructures, which allows for multiple destructive tests of a microstructure, insight into how a specimen will deform, variability quantification, and the ability to measure the effects of microstructural changes. Several sets of microstructure clones, pure nickel tensile bars, were tested. The techniques of digital image correlation, crystal plasticity finite element analysis, high resolution electron backscatter diffraction, transmission electron microscopy, and dislocation dynamics were used to understand the structural behavior of these microstructures. This work reshapes the fields of crystal plasticity and structure-property relationships by providing a technique to control for specific variables, quantify microstructural stochasticity, and replicate experiments.

36 MATERIALS SCIENCE↗

Structure of transient oxides formed on NiCrAl alloys

It is one of the three objectives of the present study to document the fine internal structure of the transient scales in order to clarify the development of the stable alpha-Al2O3 from a structural point of view. Another objective is concerned with the origin of features found in the mature alpha-Al2O3 scales, such as voids, taking into account an examination in the early stages of oxidation. The third objective is to relate any difference in scale structure caused by oxide adherence additives (Y or Zr) to the current oxide adherence theories. The primary effect of short-time oxidation on the NiCrAl substrate structure is found to be production of dislocations and aluminum-depleted phases. The random alpha-Al2O3 scale is the primary oxide phase observed in contact with the metal.

Smialek, J. L.↗

The stability of lamellar gamma-gamma-prime structures

The stability of stress-annealed gamma/gamma-prime lamellar structures were investigated using three nickel-base single-crystal alloys (the NASAIR 100 and two similar alloys, E and F, containing 5 and 10 wt pct Co, respectively) stress-annealed at 1000 C to form lamellae perpendicular to the applied stress. The rate of the lamellar thickening under various thermal and creep exposures was examined by SEM. For unstressed aging at 1100 C, the lamellar structures of the NASAIR and the E alloys exhibited continuous but slow lamellar coarsening, whereas the lamellae of the alloy F showed pronounced thickening plus spheroidization. Resistance to lamellar thickening was correlated with high magnitudes of lattice mismatch, which promoted a more regular lamellar structure and a finer spacing of misfit dislocations. Specimens which were tension-annealed prior to compressive creep testing exhibited an earlier onset of tertiary creep in comparison with only heat-treated specimens. This was associated with accelerated lamellar coarsening in the stress-annealed specimens.

Nathal, M. V.↗

Hardening mechanisms in a dynamic strain aging alloy, Hastelloy X, during isothermal and thermomechanical cyclic deformation

The relative contributions of the hardening mechanisms in Hastelloy X during cyclic deformation were investigated by conducting isothermal cyclic deformation tests within a total strain range of +/-0.3 pct and at several temperatures and strain rates, and thermomechanical tests within several different temperature limits. The results of the TEM examinations and special constant structure tests showed that the precipitation on dislocations of Cr23C6 contributed to hardening, but only after sufficient time above 500 C. Solute drag alone produced very considerable cyclic hardening. Heat dislocation densities, peaking around 10 exp 11 per sq cm, were found to develop at temperatures producing the greatest cyclic hardening.

Miner, R. V.↗

Effects of dislocations in Stranski-Krastanow quantum dots

The interrelations between structural and optical properties in Strasnki-Krastanow (S-K) quantum dots are examined trough different experiments that explore III-V quantum dots (QD) formation.

nanotechnology ordered structure photoiluminescenc↗

High-efficiency heteroepitaxial InP solar cells

High-efficiency, thin-film InP solar cells grown heteroepitaxially on GaAs and Si single-crystal bulk substrates are being developed as a means of eliminating the problems associated with using single-crystal InP substrates. A novel device structure employing a compositionally graded Ga(x)In(1-x)As layer between the bulk substrate and the InP cell layers is used to reduce the dislocation density and improve the minority carrier properties in the InP. The structures are grown in a continuous sequence of steps using computer-controlled atmospheric pressure metalorganic vapor phase epitaxy (APMOVPE). Dislocation densities as low as 3 x 10(exp 7) sq cm and minority carrier lifetimes as high as 3.3 ns are achieved in the InP layers with this method using both GaAs or Si substrates. Structures prepared in this fashion are also completely free of microcracks. These results represent a substantial improvement in InP layer quality when compared to heteroepitaxial InP prepared using conventional techniques such as thermally cycled growth and post-growth annealing. The present work is is concerned with the fabrication and characterization of high-efficiency, thin-film InP solar cells. Both one-sun and concentrator cells were prepared for device structures grown on GaAs substrates. One-cell cells have efficiencies as high as 13.7 percent at 25 C. However, results for the concentrator cells are emphasized. The concentrator cell performance is characterized as a function of the air mass zero (AM0) solar concentration ratio and operating temperature. From these data, the temperature coefficients of the cell performance parameters are derived as a function of the concentration ratio. Under concentration, the cells exhibit a dramatic increase in efficiency and an improved temperature coefficient of efficiency. At 25 C, a peak conversion efficiency of 18.9 percent is reported. At 80 C, the peak AM0 efficiency is 15.7 percent at 75.6 suns. These are the highest efficiencies yet reported for InP heteroepitaxial cells. Approaches for further improving the cell performance are discussed.

Wanlass, M. W.↗

Dislocation dynamics in heterogeneous nanostructured materials

Crystalline materials can be strengthened by introducing dissimilar phases that impede dislocation glide. At the same time, the changes in microstructure and chemistry usually make the materials less ductile. One way to circumvent the strength–ductility dilemma is to take advantage of heterogeneous nanophases which simultaneously serve as dislocation barriers and sources. Owing to their superior mechanical properties, heterogeneous nanostructured materials (HNMs) have attracted a lot of attention worldwide. Nevertheless, it has been difficult to characterize dislocation dynamics in HNMs using classical continuum models, mainly due to the challenges in describing the elastic and plastic heterogeneity among the phases. Here, in this work, we advance a phase-field dislocation dynamics (PFDD) model to treat multi-phase materials, consisting of phases differing in composition, structural order, and size in the same system. We then apply the advanced PFDD model to exploring two important but divergent materials design problems in HNMs: dislocation/obstacle interactions and dislocation/interface interactions. Results show that the interactions between a dislocation and distribution of obstacles varying in structure and composition cannot be understood by simply interpolating from their individual interactions with a dislocation. It is also found that materials containing interfaces with nanoscale thicknesses and compositional gradients have a much higher dislocation bypass stress than those with sharp interfaces, providing an explanation for the simultaneous high strength and toughness of thick interface-containing nanolaminates as observed in recent experiments.

36 MATERIALS SCIENCE↗

Microstructures and mechanical properties of a modified 9Cr ferritic-martensitic steel in the as-built condition after additive manufacturing

A newly developed nano-structured high-Mn 9Cr ferritic-martensitic (FM) steel designed for additive manufacturing (Additive-manufactured Nanostructured Alloy, ANA) was fabricated via the direct energy deposition method. The as-printed ANA2 showed tensile properties (strength and elongation) and Charpy impact toughness (upper-shelf energy and ductile-brittle transition temperature) comparable to oxide-dispersion-strengthened (ODS) Eurofer and PM2000. Compared with wrought P91, the as-built ANA2 showed significantly higher yield strength but inferior Charpy impact toughness and ductility. Microstructural characterization revealed uniformly distributed sub-micron pores, an extremely high dislocation density, and a high density of ultrafine nano-structured precipitates in the matrix. The microstructures indicated the dislocations as the dominant strengthening element and the ultrafine precipitates as the primary contribution to estimated irradiation sink density. This work demonstrates the ability to exploit the unique consolidation properties of additive manufacturing to fabricate steels which marry the benefits of both ODS alloys and conventionally processed FM steels.

36 MATERIALS SCIENCE↗

In situ study on radiation response of tungsten manufactured by laser powder bed fusion

Tungsten (W) produced by laser powder bed fusion (LPBF) was examined by in situ Krypton (Kr) ion irradiation at 400 °C up to 2.52 displacements per atom (dpa) to investigate its radiation response. Dislocation loops with identical Burgers vectors form aligned raft structures, inducing significant grain misorientation accumulation. Defect saturation was observed beyond 0.36 dpa, marked by constant loop density and raft spacing. WO 3 nanoparticles are found in the as-printed matrix and served as efficient defect sinks. Dislocation loops were absorbed at the W/WO 3 interface, facilitating defect annihilation and suppressing defect accumulation. In conclusion, these findings highlight the role of LPBF microstructure and oxide interfaces in mediating radiation-induced defect evolution, offering insights for designing radiation tolerant W-based materials.

Defect sink↗

Pitting Corrosion in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion Additive Manufacturing: A Review and Perspective

Abstract 316L stainless steel (316L SS) is a flagship material for structural applications in corrosive environments, having been extensively studied for decades for its favorable balance between mechanical and corrosion properties. More recently, 316L SS has also proven to have excellent printability when parts are produced with additive manufacturing techniques, notably laser powder bed fusion (LPBF). Because of the harsh thermo-mechanical cycles experienced during rapid solidification and cooling, LPBF processing tends to generate unique microstructures. Strong heterogeneities can be found inside grains, including trapped elements, nano-inclusions, and a high density of dislocations that form the so-called cellular structure. Interestingly, LPBF 316L SS not only exhibits better mechanical properties than its conventionally processed counterpart, but it also usually offers much higher resistance to pitting in chloride solutions. Unfortunately, the complexity of the LPBF microstructures, in addition to process-induced defects, such as porosity and surface roughness, have slowed progress toward linking specific microstructural features to corrosion susceptibility and complicated the development of calibrated simulations of pitting phenomena. The first part of this article is dedicated to an in-depth review of the microstructures found in LPBF 316L SS and their potential effects on the corrosion properties, with an emphasis on pitting resistance. The second part offers a perspective of some relevant modeling techniques available to simulate the corrosion of LPBF 316L SS, including current challenges that should be overcome.

Voisin, T. (ORCID:0000000287462659)↗

Role of Chemical Disorder in High Temperature Dislocation Glide in Refractory Multi-principal Element Alloys

Refractory multi-principal element alloys (RMPEAs) combine a chemically disordered lattice with a structurally ordered, single‐phase body‐centered cubic (bcc) crystal structure. Chemical fluctuations in these alloys give rise to significant energy barriers that impede dislocation motion. In this study, we use phase field dislocation dynamics to examine how spatial temperature fluctuations compete with randomness in energy barriers to affect the motion of long screw dislocations in three equi-atomic MoNbTa‐based RMPEAs: MoNbTa, MoNbTaW, and MoNbTaVW. Over a wide range of homologous temperatures (T h ≈ 0–0.6), we determined a screw dislocation ‘flow stress’ as the minimum applied stress to sustain continuous motion over a long excursion distance within a fixed timeframe. All three RMPEAs exhibit temperature dependent flow stress with three characteristic glide regimes: at low homologous temperatures, flow stress drops sharply, and screw glide remains planar and rectilinear; at intermediate homologous temperatures, the flow stress levels off as glide becomes planar but wavy; and at high homologous temperatures, flow stress plateaus as screws exhibit nonplanar, three‐dimensional motion. Glide kinetics and transition temperatures are controlled by the chemically induced fluctuations in the energy landscape. The rectilinear to wavy transition temperature is controlled by statistically weakest local barriers in the glide plane, whereas the wavy to 3D transition temperature is governed by statistically strongest local barriers. At low and intermediate homologous temperatures, the relative spread in energy barriers governs glide behavior by controlling the local kinetics of kink pair formation and kink pinning. At high homologous temperatures, the average barrier height governs the glide behavior by controlling the number of out-of-plane excursions during 3D glide. These findings reveal how random chemical fluctuations determine screw‐driven plasticity in RMPEAs, providing critical insight for the design of high temperature structural alloys.

Defects↗

Heteroepitaxial Integration of ZnGeN 2 on GaN Buffers Using Molecular Beam Epitaxy

Recently theorized hybrid II-IV-N 2 /III-N heterostructures, based on current commercialized (In,Ga)N devices, are predicted to significantly advance the design space of highly efficient optoelectronics in the visible spectrum, yet there are few epitaxial studies of II-IV-N 2 materials. In this work, we present heteroepitaxial ZnGeN 2 grown on GaN buffers and AlN templates. We demonstrate that a GaN nucleating surface is crucial for increasing the ZnGeN 2 crystallization rate to combat Zn desorption, extending the stoichiometric growth window from 215 degrees C on AlN to 500 degrees C on GaN buffers. Structural characterization reveals well-crystallized films with threading dislocations extending from the GaN buffer. These films have a critical thickness for relaxation of 20-25 nm as determined by reflection high energy electron diffraction (RHEED) and cross-sectional scanning electron microscopy (SEM). The films exhibit a cation-disordered wurtzite structure, with lattice constants a = 3.216 +/- 0.004 A and c = 5.215 +/- 0.005 A determined by RHEED and X-ray diffraction (XRD). This work demonstrates a significant step toward the development of hybrid ZnGeN 2 -GaN integrated devices.

36 MATERIALS SCIENCE↗

The hierarchical energy landscape of screw dislocation motion in refractory high-entropy alloys

High-entropy alloys (HEAs) with concentrated solid solutions are conceived to possess a rugged atomic and energy landscape in which dislocation motion necessarily proceeds to accommodate mechanical deformation. Fundamental questions remain as to how rough the energy landscape is and to what extent it can be influenced by the local ordering of their constituent elements. Here, we construct and report the potential energy landscape (PEL) governing screw dislocation motion in refractory HEAs that reveals a hierarchical and multilevel structure with a collection of small basins nested in large metabasin. This striking feature pertaining to HEAs exerts a trapping force and back stress on saddle point activations, retarding dislocation movement. Further, by introducing chemical short-range order, the energy landscape is smoothed but skewed to different degrees that shifts the rate-liming process from kink-glide to kink-pair nucleation. The chemical disorder-roughened PEL in HEAs, analogous to structural disorder induced in metallic glasses, signifies the role of various barrier-hopping processes underlying the extraordinary mechanical behaviors of the two distinct groups of materials.

36 MATERIALS SCIENCE↗

Selective laser sintering and spark plasma sintering of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide ceramics

Abstract Two advanced manufacturing processes, spark plasma sintering (SPS) and selective laser sintering (SLS), have been developed for synthesis of (Zr,Nb,Ta,Ti,W)C compositionally complex carbide (CCC) via reactive sintering of a powder mixture of constitute monocarbides. X‐ray diffraction analysis confirmed that the single‐phase CCC can be formed by both SPS and SLS. While a homogenous microstructure with uniform metal element distributions was developed during SPS, three‐layer microstructures with a thin TiC‐rich layer and two TaC‐rich layers along with a TiO 2 ‐rich surface layer containing W nanoparticles were formed during SLS. In addition, cellular structures with W, Zr, and Ti element segregation and dislocations on cell boundaries were observed in the SLS‐CCC sample, indicating the effect of nonequilibrium conditions on microstructure formation during laser melting followed by rapid cooling and solidification process. Compared to the SPS‐CCC sample, the SLS‐CCC showed enhanced hardness and reduced thermal conductivity, which may be related to their unique cellular structures.

36 MATERIALS SCIENCE↗