Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dislocation Lines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Mechanical behavior and microstructure of Ti{sub 20}Hf{sub 20}Zr{sub 20}Ta{sub 20}Nb{sub 20} high-entropy alloy loaded under quasi-static and dynamic compression conditions

The microstructure and the mechanical behavior of equimolar Ti{sub 20}Hf{sub 20}Zr{sub 20}Ta{sub 20}Nb{sub 20} high-entropy alloy in a wide range of initial strain rates between ~ 10{sup −3} s{sup −1} and ~ 3.4 × 10{sup 3} s{sup −1} were studied. A significant increment in the yield strength with increasing strain rate was observed. The yield strength at ~ 3.4 × 10{sup 3} s{sup −1} was about 40% higher than that measured at ~ 10{sup −3} s{sup −1}. Analysis by electron backscatter diffraction shows that in the low strain rate regime (up to ~ 10 s{sup −1}) the deformation occurs mainly in evenly distributed bands, while in the dynamic regime the deformation is strongly localized in macroscopic shear bands accompanied by softening even after the onset of yielding. The Kernel Average Misorientation technique reveals a high level of lattice rotation within these bands that also carries intense shear. In addition, X-ray diffraction line profile analysis indicates that the sharp increase in the flow stress is mostly related to an increase of the dislocation density. - Highlights: • Strain rate effect on the plastic behavior of Ti{sub 20}Hf{sub 20}Zr{sub 20}Ta{sub 20}Nb{sub 20} HEA was studied. • Low strain rate regime was characterized by a continuous hardening. • At high strain rates softening occurred shortly after the onset of yielding. • Intense strain localization in shear bands occurred in the high strain rate regime. • High dislocation density explained the upturn of flow stress at high strain rates.

36 MATERIALS SCIENCE↗
NASA NTRS1992

Cathodoluminescence and transmission electron microscopy study of dark line defects in thick In(0.2)Ga(0.8)As/GaAs multiple quantum wells

TEM and cathodoluminescence (CL) imaging and spectroscopy have been performed on In(0.2)Ga(0.8)As/GaAs MQW structures. Cross-sectional and plan-view TEM demonstrates that misfit dislocations (MDs) are confined to the MQW-to-GaAs interfacial regions. The observed large variation in the exciton luminescence intensity is interpreted as due to the presence of nonradiative recombination centers spread homogeneously in the MQW region away from interface MDs. These nonradiative recombination centers compete with exciton and midgap radiative centers at wavelengths of 950 nm and 1000-1600 nm, respectively, resulting in spatiallty correlated dark line defects for all CL imaging wavelengths.

Rich, D. H.↗
DOE OSTI2013

Systematic study of polycrystalline flow during tension test of sheet 304 austenitic stainless steel at room temperature

By systematic study the mapping of polycrystalline flow of sheet 304 austenitic stainless steel (ASS) during tension test at constant crosshead velocity at room temperature was obtained. The main results establish that the trajectory of crystals in the polycrystalline spatially extended system (PCSES), during irreversible deformation process obey a hyperbolic motion. Where, the ratio between the expansion velocity of the field and the velocity of the field source is not constant and the field lines of such trajectory of crystals become curved, this accelerated motion is called a hyperbolic motion. Such behavior is assisted by dislocations dynamics and self-accommodation process between crystals in the PCSES. Furthermore, by applying the quantum mechanics and relativistic model proposed by Muñoz-Andrade, the activation energy for polycrystalline flow during the tension test of 304 ASS was calculated for each instant in a global form. In conclusion was established that the mapping of the polycrystalline flow is fundamental to describe in an integral way the phenomenology and mechanics of irreversible deformation processes.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Orientation and temperature dependence of some mechanical properties of the single-crystal nickel-base superalloy Rene N4. I - Tensile behavior

Single crystal specimens of a nickel-base superalloy with axes near 001, 011, and -112 were tested in tension at room temperature, 760, and 980 C. The alloy Rene N-4, was developed for gas turbine engine blades and has the nominal composition 3.7 Al, 4.2 Ti, 4 Ta, 0.5 Nb, 6 W, 1.5 Mo, 9 Cr, 7.5 Co, balance Ni, (all in weight percent). Analysis of slip band traces, specimen axis rotation, and dislocation Burgers vectors showed that at 760 and 980 C primary cube slip supplanted normal octahedral slip for the -112 line-oriented specimens. The other two orientations, which have lower resolved shear stresses on the cube system, exhibited octahedral slip at all three temperatures. The critical resolved shear stress is considerably greater on the cube system than on the octahedral system at room temperature. However, at 760 and 980 C the critical resolved shear stresses on the two systems are about the same. While the room temperature and 980 C yield strengths for the two orientations exhibiting octahedral slip could be rationalized on the basis of resolved shear stress, those at 760 C could not. Such violations of Schmid's law have previously been observed in other superalloys and single phase gamma-prime.

Miner, R. V.↗
DOE OSTI2014

Dislocation engineering in SiGe on periodic and aperiodic Si(001) templates studied by fast scanning X-ray nanodiffraction

Fast-scanning X-ray nanodiffraction microscopy is used to directly visualize the misfit dislocation network in a SiGe film deposited on a pit-patterned Si substrate at the beginning of plastic relaxation. X-ray real-space diffracted intensity maps are compared to topographic atomic force microscopy images, in which crosshatch lines can be seen. The change in intensity distribution as a function of the incidence angle shows localized variations in strain within the SiGe film. These variations, which reflect the order imposed by the substrate pattern, are attributed to the presence of both bunches of misfit dislocations and defect-free regions.

36 MATERIALS SCIENCE↗
DOE OSTI2013

X-Ray Diffraction Line Broadening in Shock Modified Pyrite [Book Chapter]

Powder compacts of a commercially-available pyrite, FeS 2 , have been subjected to controlled, quantitative high pressure shock loading at peak pressures from 7.5-22 GPa. The profiles of the x-ray diffraction lines have been examined to determine the reduction of the crystallite (domain) size and the introduction of residual microstrain due to defects and dislocations resulting from the transmission and interaction of the shockwave. Pyrite experience a surprisingly smaller profile broadening than observed for all other materials under similar shock conditions, suggesting a much more refractory character. Such small changes are consistent with low defect densities and with the relative low reaction activity (oxidation of sulfide to sulfate by humid air) observed on this material in the complementary studies.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Investigation of deformation micro-mechanisms in nickel consolidated from a bimodal powder by spark plasma sintering

Bulk polycrystalline nickel compact was processed by spark plasma sintering from heterogeneous powder consisting of a mixture of nanometer and micrometer sized particles. The consolidated samples inherited the bimodal structure of the starting powder and was composed of ~ 55 vol.% coarse-grained (with the grain size larger than 1 μm) and ~ 45 vol.% ultrafine-grained (with an average grain size of ~ 550 nm) components. The deformation mechanisms were established by EBSD, X-ray line profile analysis and in-situ TEM observations. In the ultrafine-grained volume, the deformation occurred mainly through the activation of dislocation sources emitting full or partial dislocation either from grain interior or grain boundaries. Besides dislocation activity, rolling and sliding of nanograins were also observed during deformation by in-situ transmission electron microscopy, which have a considerable contribution to the observed high strain rate sensitivity of the bimodal microstructure. The cracks formed during deformation easily propagated in the nanograin regions due to the weaker particle bonding caused by the relatively high fraction of native oxide layer on the surface of the initial nanoparticles. - Highlights: • Bulk bimodal polycrystalline Ni was processed by SPS from a heterogeneous powder. • High SRS of the flow stress was observed which enhanced ductility and strength. • In-situ TEM revealed dislocation sources inside and at the boundaries of UFGs. • Twinning, partial dislocation and NG rolling were observed at crack tip vicinity. • The high SRS pertained to both dislocation activity in CG and NG rolling.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1984

The crack-inclusion interaction problem

The general plane elastostatic problem of interaction between a crack and an inclusion is considered. The Green's functions for a pair of dislocations and a pair of concentrated body forces are used to generate the crack and the inclusion. Integral equations are obtained for a line crack and an elastic line inclusion having an arbitrary relative orientation and size. The nature of stress singularity around the end points of rigid and elastic inclusions is described and three special cases of this intersection problem are studied. The problem is solved for an arbitrary uniform stress state away from the crack-inclusion region. The nonintersecting crack-inclusion problem is considered for various relative size, orientation, and stiffness parameters, and the stress intensity factors at the ends of the inclusion and the crack are calculated. For the crack-inclusion intersection case, special stress intensity factors are defined and are calculated for various values of the parameters defining the relative size and orientation of the crack and the inclusion and the stiffness of the inclusion.

Xue-Hui, L.↗
NASA NTRS1986

The crack-inclusion interaction problem

The general plane elastostatic problem of interaction between a crack and an inclusion is considered. The Green's functions for a pair of dislocations and a pair of concentrated body forces are used to generate the crack and the inclusion. Integral equations are obtained for a line crack and an elastic line inclusion having an arbitrary relative orientation and size. The nature of stress singularity around the end points of rigid and elastic inclusions is described and three special cases of this intersection problem are studied. The problem is solved for an arbitrary uniform stress state away from the crack-inclusion region. The nonintersecting crack-inclusion problem is considered for various relative size, orientation, and stiffness parameters, and the stress intensity factors at the ends of the inclusion and the crack are calculated. For the crack-inclusion intersection case, special stress intensity factors are defined and are calculated for various values of the parameters defining the relative size and orientation of the crack and the inclusion and the stiffness of the inclusion.

Liu, X.-H.↗
NASA NTRS1999

In-Situ Optical Determination of Thermomechanical Properties of ZnSe and ZnTe Crystals

At temperatures above 1/2 T(sub m), the generation and movement of dislocations may result due to the load created by the weight of the crystal itself The deformation may be expected to increase the line defect density and may result in generation of low angle grain boundaries, especially in the regions of the crystal attached to the ampule. It has often been suspected that elimination of this effect in space can improve crystallinity of crystals grown under microgravity conditions, however, a direct experimental proof of such relation is still missing. In this work we have designed and built a system of in-situ optical detection and measurement of the mechanical deformations of a crystal wafer under its own weight, and studied the deformation effects as a function of temperature. The results of the measurements for ZnSe and ZnTe crystal wafers will be presented.

Burger, A.↗
DOE OSTI2018

Three-dimensional X-ray diffraction imaging of dislocations in polycrystalline metals under tensile loading

Abstract The nucleation and propagation of dislocations is an ubiquitous process that accompanies the plastic deformation of materials. Consequently, following the first visualization of dislocations over 50 years ago with the advent of the first transmission electron microscopes, significant effort has been invested in tailoring material response through defect engineering and control. To accomplish this more effectively, the ability to identify and characterize defect structure and strain following external stimulus is vital. Here, using X-ray Bragg coherent diffraction imaging, we describe the first direct 3D X-ray imaging of the strain field surrounding a line defect within a grain of free-standing nanocrystalline material following tensile loading. By integrating the observed 3D structure into an atomistic model, we show that the measured strain field corresponds to a screw dislocation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The effect of local chemical ordering on Frank-Read source activation in a refractory multi-principal element alloy

In this work, we investigate the operation of Frank-Read (FR) sources in a refractory multi-principal element alloy (MPEA). Simulations of discrete dislocation motion in MPEAs is enabled by the development of a phase field dislocation dynamics model that treats the atomic-scale fluctuations in lattice energies across the glide plane, present due to local ordering in the chemical composition within the nominally random MPEA atomic structure. We consider, through simulation, a range of length scales over which ordering occurs, varying from short-range lengths, a few times dislocation core width, to long-range lengths, an order of magnitude longer than the core. Characteristic of this body-centered cubic MPEA, the simulations also include screw/edge character dependence in glide resistance, as informed by atomic scale simulation. The critical stresses to activate the source for the same source size are found to be statistically distributed, as a direct consequence of the underlying variation in lattice energy. Furthermore, analysis of critical state for activating edge and screw FR sources in the MPEA reveals that FR source operation occurs via a two-step mechanism, involving athermal kink-pair formation, unlike the conventional FR source operation in a material with no composition fluctuations. This mechanism lowers the average critical stress required to activate the FR source and causes the statistical dispersion in critical stress to depend on the range of composition ordering. More importantly, it leads to a more severe dependence of source strength on FR source length than predicted by line tension alone.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy

CrCoNi exhibits the best combination of strength and ductility among all the equiatomic single-phase FCC subsets of the CrMnFeCoNi high-entropy alloy. Here, its yield strength was determined in compression as a function of grain size and temperature. Yield strength was also plotted as a function of “crystallite” size, which takes into account both annealing twin boundaries and grain boundaries. The resulting Hall-Petch slopes were straight lines but with different slopes that depend on the number of twin boundaries per grain. Scanning transmission electron microscopy of deformed specimens revealed the formation of dislocation pile-ups at grain and annealing twin boundaries indicating that the latter also act as obstacles to slip and contribute to strength. Using a simple pile-up model, the strengths of the grain and twin boundaries were estimated to lie in the range 900–1250 MPa. Assuming that they have the same strength, in the case of twin boundaries this strength corresponds roughly to the stress required to constrict Shockley partials, which suggests that dissociated dislocations have to become compact before they can cross the annealing twin boundaries.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Stress and efficiency studies

Optical and electrical characterization of defects has been started in EFG ribbon grown in a system that will be used to test the stress model. Temperature and stress field modeling aimed at defining low stress growth configuration is also in progress, and results will be used to guide development of the experimental system. The baseline defect configuration for ribbon grown at speeds of approx. 1 cm/min consists of dislocation densities of the order of 10 to the 5th power to 10 to the 6th power/sq cm, as well as saucer type etch pits and line defects. All these defects are inhomogeneously distributed. EBIC measurements indicate that diffusion lengths are in the range 20 to 60 microns, and significant spatial inhomogeneities occur through the ribbon thickness. Growth speed changes in the range 0.7-1.0 cm/min do not produce significant variations in ribbon defect configurations.

Source record↗
NASA NTRS1989

The high temperature deformation in cyclic loading of a single crystal nickel-base superalloy

The high temperature cyclic stress softening response of the single crystal nickel-base superalloy PWA 1480 was investigated. Specimens oriented near the 001- and 111-lines were tested at 1050 C in low-cycle fatigue and then microstructurally evaluated. The 001- and 111-line specimens had dissimilar flow behavior in monotonic tensile tests, but comparable softening in low-cycle fatigue. This softening was accompanied by rapid generation of dislocation networks at the gamma-gamma-prime interfaces and by a slower time-dependent coarsening of gamma-prime precipitates. Due to the rapid formation of a dislocation substructure at the gamma-gamma-prime interfaces, the cyclic stress softening could be modeled with an existing theory which related cyclic stress to the evolving microstructure and dislocation structure.

Gabb, T. P.↗
NASA NTRS1991

Fracture of single crystals of the nickel-base superalloy PWA 1480E in helium at 22 C

The fracture behavior and deformation of He-charged (at 22 C) single crystals of PWA 1480E Ni-base superalloy were investigated using SEM and TEM techniques to observe the behavior of tensile fractures in notched single crystals with seven different crystal growth orientations: 100-line, 110-line, 111-line, 013-line, 112-line, 123-line, and 223-line. To identify the cleavage plane orientation, a stereoscopic technique, combined with the use of planar gamma-prime morphologies, was applied. It was found that gamma-prime particles were orderly and closely aligned with edges along the 100-line, 010-line, and 001-line-oriented directions of the gamma matrix. Different crystal growth orientations were found not to affect the morphology of gamma-prime particles. The accumulation of dislocations around gamma/gamma-prime interfaces formed strong barriers to subsequent dislocation movement and was the primary strengthening mechanism at room temperature.

Chen, P. S.↗
NASA NTRS2020

The Fast Radio Burst Luminosity Function and Death Line in the Low-Twist Magnetar Model

We explore the burst energy distribution of fast radio bursts(FRBs)in the low-twist magnetar model ofWadiasingh & Timokhin(WT19). Motivated by the power-lawfluence distributions of FRB121102, we proposean elementary model for the FRB luminosity function of individual repeaters with an inversion protocol thatdirectly relates the power-law distribution index of magnetar short burstfluences to that for FRBs. The protocolindicates that the FRB energy scales virtually linearly with crust/field dislocation amplitude, if magnetar shortbursts prevail in the magnetoelastic regime. Charge starvation in the magnetosphere during bursts(required inWT19)for individual repeaters implies the predicted burstfluence distribution is narrow,3 decades for yieldingstrains and oscillation frequencies feasible in magnetar crusts. Requiring magnetic confinement and chargestarvation, we obtain a death line for FRBs, which segregates magnetars from the normal pulsar population,suggesting only the former will host recurrent FRBs. We convolve the burst energy distribution for individualmagnetars to define the distribution of luminosities in evolved magnetar populations. The broken power-lawluminosity function’s low-energy character depends on the population model, while the high-energy index tracesthat of individual repeaters. Independent of the evolved population, the broken power-law isotropic-equivalentenergy/luminosity function peaks at∼1037–1040erg with a low-energy cutoff at∼1037erg. Lastly, we considerthe localfluence distribution of FRBs andfind that it can constrain the subset of FRB-producing magnetarprogenitors. Our model suggests that improvements in sensitivity may reveal aflattening of the global FRBfluencedistribution and saturation in FRB rates.

Cosmology↗