Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

1-Dodecane-sulfonic-acid-sodium-salt(LAS) assisted hydrothermal synthesis of Cd{sub x}Zn{sub 1-x}S solid solution as efficient photocatalysts under visible light irradiation

With anionic surfactant LAS assisted, series of zinc cadmium sulfide semiconductor photocatalysts were synthesized by hydrothermal method. These products were characterized by X-ray diffraction (XRD), UV-Vis absorption spectra (UV-Vis) and scanning electron microscopy (FESEM). The photocatalytic activities of as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible-light irradiation. The best synthesis parameters are: Composition 0.9:0.1 (Cd:Zn molar ratio), Temperature 160 deg. C, Hydrothermal Time 48 Hour, LAS Concentration 1.7 mmol/L, the maximum visible-light-catalytic hydrogen production rate is 161.25 {mu}mol/h (lambda>430 nm) which is higher than those of by coprecipitation method. The experiment results indicate that surfactant assisted hydrothermal method is an effective way to get highly active CdZnS solid solution photocatalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Utilization of municipal solid waste incineration fly ash for sulfoaluminate cement clinker production

Highlights: > The replacement can be taken up to 30% of MSWI fly ash in the raw mix. > The novelty compositional parameters were defined, their optimum values were determined. > Expansive property of SAC is strongly depended on gypsum content. > Three leaching test methods are used to assess the environmental impact. - Abstract: The feasibility of partially substituting raw materials with municipal solid waste incineration (MSWI) fly ash in sulfoaluminate cement (SAC) clinker production was investigated by X-ray diffraction (XRD), compressive strength and free expansion ratio testing. Three different leaching tests were used to assess the environmental impact of the produced material. Experimental results show that the replacement of MSWI fly ash could be taken up to 30% in the raw mixes. The good quality SAC clinkers are obtained by controlling the compositional parameters at alkalinity modulus (C{sub m}) around 1.05, alumina-sulfur ratio (P) around 2.5, alumina-silica ratio (N) around 2.0{approx}3.0 and firing the raw mixes at 1250 deg. C for 2 h. The compressive strengths of SAC are high in early age while that develop slowly in later age. Results also show that the expansive properties of SAC are strongly depended on the gypsum content. Leaching studies of toxic elements in the hydrated SAC-based system reveal that all the investigated elements are well bounded in the clinker minerals or immobilized by the hydration products. Although some limited positive results indicate that the SAC prepared from MSWI fly ash would present no immediate thread to the environment, the long-term toxicity leaching behavior needs to be further studied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

BFKL Pomeron loop contribution in diffractive photoproduction and inclusive hadroproduction of J/ψ and Υ

We analyze contributions to the heavy vector meson production with large transverse momentum in proton-proton and diffractive photon-proton scattering driven by an exchange of two Balitsky-Fadin-Kuraev-Lipatov Pomerons in the squared amplitudes. The Pomerons couple to a single parton and form a Pomeron loop closed by the vector meson impact factors. For the photon-proton case the diffractive cut of the Pomeron loop contributes, and for the inclusive hadroproduction one finds the loop with two cut Pomerons. We compute both of these Pomeron loop contributions and study in detail their properties. The results are then used to calculate the cross sections for diffractive J/ψ photoproduction with large transverse momentum at HERA and the correlated two Pomeron contribution for inclusive J/ψ and γ production cross sections at the LHC. Within a unified approach a good description of the photoproduction data is found, but correlated two Pomeron mechanism gives only a small contribution to hadroproduction of the vector mesons at the LHC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shape evolution of Eu-doped Bi{sub 2}WO{sub 6} and their photocatalytic properties

Highlights: • Hydrothermal synthesis of Eu-doped Bi{sub 2}WO{sub 6} micro/nanostructure without any additives. • Dopant and doping level affect the shape evolution and photocatalytic activities. • Eu-doped Bi{sub 2}WO{sub 6} exhibit superior photocatalytic activity in degradation of RhB. - Abstract: Europium-doped bismuth tungstate (Eu-doped Bi{sub 2}WO{sub 6}) was synthesized via hydrothermal method. The composition, structure, and microstructure of the products were characterized by X-ray diffraction and scanning electron microscopy. Depending on the doping level, nanoflakes and 3D hierarchical microspheres were formed. The photocatalytic activities of all products obtained were evaluated by the degradation of Rhodamine-B under visible light irradiation. A substantially improved photocatalytic performance of Eu-doped Bi{sub 2}WO{sub 6} is achieved. This study demonstrates a simple method that could produce stable photocatalysts with greatly enhanced performance.

36 MATERIALS SCIENCE↗

In situ deformation of antigorite-olivine two-phase mixtures: Implications for dynamics and seismic anisotropy in the mantle wedge

Water released from hydrous minerals in subducting slabs reacts with the overlying plate, resulting in widespread serpentinization in the mantle wedge. Deformation of serpentinized peridotites has been invoked to explain forearc seismic anisotropy, yet studies of the mechanical properties and deformation behaviors of serpentine-bearing multiphase aggregates remain limited. Here we deformed olivine-antigorite mixtures containing 70, 50, and 20 vol.% of antigorite at 2.5 – 7.6 GPa, 673 K and strain rates of ∼10 –5 –10 –4 s –1 . Elasto-viscoplastic self-consistent simulations, constrained by synchrotron X-ray diffraction (XRD) data, were used to estimate lattice strain, stress–strain partitioning, crystallographic preferred orientations (CPO) development, and aggregate strength. Selected run products were also analyzed by electron backscatter diffraction for comparison with the CPO results obtained from XRD experiments. We found olivine transitions from A- or B-type to C-type when antigorite fraction drops to 20 vol.%, coinciding with a microstructural change from interconnected weak layers to a load-bearing framework (LBF). An additional run on a sample Atg50/Ol50 with preexisting microstructures suggested the formation of LBF was promoted by these microstructures, although the preexisting antigorite CPO has been overprinted at 20.8 % strain and could be erased completely by subsequent deformation in nature. Estimated viscosity of the two-phase mixtures suggests that low-degree serpentinization (≤20 %) in the mantle wedge may increase the strength of olivine-rich peridotite and hinder slab-mantle decoupling, whereas high-degree serpentinization (≥50–70 %) weakens the peridotite and favors decoupling if sufficient viscosity contrast (>10) develops. Seismic anisotropy shows a nonlinear dependence on antigorite fraction: antigorite CPO governs the anisotropy of the mixtures with ≥50 vol.% antigorite, whereas olivine CPO dominates at low fractions (∼20 vol.%). The presence of pre-existing microstructures reduces seismic anisotropy of the deformed mixtures, however the persistence of pre-existing CPO in actively subducting slabs remains uncertain, making their significance over geological timescales questionable.

Crystallographic preferred orientation↗

Oxidation characteristics of Ti-33Al-6Nb-1.4Ta

Static oxidation kinetics of the gamma titanium-aluminide alloy Ti-33Al-6Nb-1.4Ta (wt pct) have been investigated in air from 700 to 1000 C and in oxygen from 800 to 1000 C using thermogravimetric analysis. The oxidation kinetics were controlled by the presence of alumina for all oxygen exposures and in air below 800 C, while the kinetics in air above 800 C were more complex. Oxidation products were identified using X-ray diffraction techniques. Oxide scale morphology was examined by SEM and TEM of the surfaces and across sections of oxidized specimens. The oxidation products formed depended on the exposure: Al2O3 and TiO2 were identified on all specimens exposed in and air and oxygen; the nitride phases TiN and Ti2AlN were also found on specimens exposed in air.

Wallace, T. A.↗

Microemulsion-assisted solvothermal synthesis of Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures

Research highlights: {yields} Pyramid-like and spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures were synthesized using a microemulsion-assisted solvothermal method with precise control of the reaction time and reaction temperature. {yields} The obtained products were characterized by X-ray diffraction (XRD), differential scanning calorimetry and thermal gravimetric analysis (DSC-TGA), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron diffraction (ED). {yields} The increase in size of pyramid-like Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures with increasing reaction time was attributed to the typical Ostwald ripening process, while the increase in size of spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures with increasing reaction temperature was explained by the increasing collision probability of microemulsion droplets. -- Abstract: Microstructures of Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O with various morphological structures and sizes were successfully synthesized using the microemulsion-assisted solvothermal method. The obtained products were characterized by X-ray diffraction (XRD), differential scanning calorimetry and thermal gravimetric analysis (DSC-TGA), scanning electron microscope (SEM), transmission electron microscope (TEM) and electron diffraction (ED). The results showed that pyramid-like and spherical Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures were synthesized depending on the reaction time and reaction temperature. Moreover, the reaction time and temperature also played important roles in controlling the morphologies and sizes of the resulting Nd{sub 2}(CO{sub 3}){sub 3}.8H{sub 2}O microstructures.

36 MATERIALS SCIENCE↗

Effects of growth parameters on the yield and morphology of Si{sub 3}N{sub 4} microcoils prepared by chemical vapor deposition

Highlights: • CVD method was successfully applied to obtain Si{sub 3}N{sub 4} microcoils in high yield without the presence of catalyst. • The process was systematically investigated through a series of control experiments. • The effects of synthesis parameters on the yield and morphology of Si{sub 3}N{sub 4} microcoils were found. • The growth mechanism of the Si{sub 3}N{sub 4} microcoils could be explained by the different growth rates between the amorphous layer and the crystalline layer. - Abstract: In this study, we provided a reliable chemical vapor deposition (CVD) method to synthesize high-purity Si{sub 3}N{sub 4} microcoils in high yield without the presence of catalyst. The achieved products were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscope. The results indicated that the yield and morphology of Si{sub 3}N{sub 4} products were influenced by the synthesis parameters such as reaction temperature, reaction time and gas flow rate. The particular conditions favorable to high yield synthesis of Si{sub 3}N{sub 4} microcoils were obtained through a series of control experiments. Furthermore, the growth of Si{sub 3}N{sub 4} microcoils was supposed to be in accord with vapor-solid (VS) growth process and the different growth rates between the amorphous layer and the crystalline layer were used to explain the formation of the coil geometry.

36 MATERIALS SCIENCE↗

Interfacial Hydrophilicity Controls Mineral Transformation Outcomes for Enstatite and Amorphous MgSiO 3

Subsurface injection of carbon dioxide (CO 2 ) into mafic-ultramafic rocks for permanent storage via mineralization is being studied to reduce emissions. Here, we investigated the carbonation products of enstatite (MgSiO 3 ) to assess its efficiency in sequestering CO 2 for safe and permanent storage as carbonate minerals. This was accomplished by conducting variable temperature carbonation reactions with samples of differing crystallinities and surface chemistries. Reaction progress was monitored utilizing in situ X-ray diffraction, and the presence of carbonate products was confirmed using additional techniques, such as thermogravimetric analysis coupled with mass spectrometry and scanning electron microscopy with energy dispersive spectrometry. Our results show that crystalline enstatite produces small amounts of the anhydrous form of MgCO 3 (magnesite), while amorphous MgSiO 3 , which was used to simulate mafic glass, more readily converts to the hydrated/hydroxylated hydromagnesite [Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O]. These results, supplemented with dynamic vapor sorption experiments, suggest that surface properties play a significant role in the pathway and degree of carbonation. These developments concerning the reactivity of CO 2 with reactive mafic phases will help further our understanding of the reactivity of these mafic-ultramafic minerals with implications for permanent carbon storage and other subsurface engineering scenarios involving reactive reservoirs.

basalt↗

Residual strain mapping of Roman styli from Iulia Concordia, Italy

Iulia Concordia is an important Roman settlement known for the production of iron objects and weapons during the Roman Empire. A huge number of well-preserved styli were found in the past century in the bed of an old channel. In order to shed light about the production processes used by Roman for stylus manufacturing, a neutron diffraction residual strain analysis was performed on the POLDI materials science diffractometer at the Paul Scherrer Institut in Switzerland. Here, we present results from our investigation conducted on 11 samples, allowing to define, in a non-invasive way, the residual strain map related to the ancient Roman working techniques. - Highlights: • We examined 11 Roman styli from the settlement of Iulia Concordia, Italy. • We performed a neutron diffraction residual strain analysis on POLDI at PSI (CH). • We identified the production processes used by Roman for stylus manufacturing. • We clarified the way and direction of working applied for different classes of styli.

36 MATERIALS SCIENCE↗

Dissolution and initial hydration behavior of tricalcium aluminate in low activity sulfate solutions

Influences of alkali or alkaline earth sulfates on the hydration of cubic tricalcium aluminate (C 3 A) were evaluated by in situ dissolution rate measurements, by ex situ near-surface composition measurements with secondary ion mass spectrometry, and by in situ synchrotron X-ray diffraction to monitor precipitation of hydration products. Both slight reductions in dissolution rate and cation-specific interactions with the solid were observed. The near-surface Ca/Al ratio is significantly lower after some dissolution and the electrolyte cations are incorporated within the surface with different affinities (Mg 2+ > K + > Na + ). An interfacial dissolution-reprecipitation mechanism may explain the observations as well as, or better than, a simple cation exchange. The sulfate concentration in solution affects the rates of both C 3 A dissolution and precipitation of hydration products. Aditionally, sulfate ions likely adsorb at the hydrous Al-rich surface layer, thereby reducing the dissolution rate of aluminates and delaying the precipitation of aluminate hydration products.

36 MATERIALS SCIENCE↗

New data on the thermal behavior of 14 Å tobermorite

The thermal behavior of two specimens of 14 Å tobermorite (plombièrite) was studied in situ at the GILDA beamline (ESRF, Grenoble, France). During dehydration, plombièrite shortens its basal spacing from 14 to 11 Å, through a progressive approaching of the complex structural modules characterizing its crystal structure. Upon heating, the 11 Å phase progressively contracts its c periodicity, with its d{sub 002} varying from 11.7 to 11.3 Å. At ca. 300 °C, a 9.6 Å phase appears; it is stable up to ca. 700 °C. Above this temperature, it expands its basal spacing up to 10.2 Å, before transforming into wollastonite. Moreover, one specimen was heated at 150 °C for 4 h and the heated product, identified as 11 Å tobermorite through X-ray powder diffraction, was used to collect micro-Raman spectra. The heated product shows single chains, in contrast with the 11 Å natural specimens studied up to now in which double wollastonite-like chains occur.

36 MATERIALS SCIENCE↗

Breakup of deuterons on tritons

The breakup reaction T (d, p)nt at the projectile deuteron energy of 36.9 MeV was studied theoretically and experimentally. The measured inclusive spectra and angular distributions of product protons are presented. A theoretical description of the reaction in question is based on the microscopic nuclear-diffractionmodel and on the theory of resonance processes. It is shown that, in T (d, p) processes, a significant role is played not only by quasifree processes involving final-state interaction that are considered in the diffraction approximation but also by the production of {sup 4}H* and {sup 4}He* resonance states. The experimental results obtained in the present study for the angular and energy distributions of final-state particles can be satisfactorily interpreted with allowance for these resonances. It is shown that only upon taking into account two {sup 4}H* resonances do the calculated spectra of protons from T (d, p) reactions appear to be in good numerical agreement with experimental data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Hydrothermal synthesis and infrared emissivity property of flower-like SnO{sub 2} particles

The flower-like SnO{sub 2} particles are synthesized through a simple hydrothermal process. The microstructure, morphology and the infrared emissivity property of the as-prepared products are characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), and infrared spectroradio meter (ISM) respectively. The results show that the as-prepared SnO{sub 2} products are all indexed to tetragonal cassiterite phase of SnO{sub 2}. The different molarity ratios of the OH{sup −} concentration to Sn{sup 4+} concentration ([OH{sup −}]:[Sn{sup 4+}]) and the polyacrylamide (PAM) lead to the different morphological structures of SnO{sub 2}, which indicates that both the [OH{sup −}]:[Sn{sup 4+}] and the PAM play an important role in the morphological evolution respectively. The infrared emissivities of the as-prepared SnO{sub 2} products are discussed.

36 MATERIALS SCIENCE↗

Particle production with rapidity correlations in proton-nucleus collisions

We illustrate how a generalization of the JIMWLK formalism which treats independently the direct and complex conjugate amplitudes can be used to describe semi-inclusive multiparticle production with rapidity correlations in pA collisions. The evolution equations that are obtained with this formalism are susceptible of numerical implementation as a Langevin process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and characterization of nano-structured TiB{sub 2} processed by milling assisted SHS route

TiB{sub 2} was synthesized via milling assisted self-propagating high-temperature synthesis (SHS) route using TiO{sub 2}, H{sub 3}BO{sub 3} and Mg powders as starting materials. The milling products were compacted and subjected to a hot filament on their top to initiate SHS. Effects of the milling time and addition of NaCl as a process diluent on the phase composition and morphology of the products were investigated. X-ray diffraction analysis indicated the formation of nano-crystalline TiB{sub 2} with mean crystallite size of 31 nm after acid leaching process at room temperature. Addition of 2 mol of NaCl in the same sample decreases the mean crystallite size to 27 nm. SEM and TEM micrographs showed that the mean particle size of TiB{sub 2} decreased from 200 nm in the un-milled sample to about 50 nm in the 5-hour mechanically activated (MA) sample. - Graphical abstract: High purity nano particles of TiB{sub 2} were achieved after complete elimination of undesirable phases by acid leaching of MA-SHS product at ambient temperature. Highlights: Black-Right-Pointing-Pointer Nano-structured pure TiB{sub 2} was synthesized by MA-SHS route. Black-Right-Pointing-Pointer The mean particle size of TiB{sub 2} phase was 50 nm. Black-Right-Pointing-Pointer Impurities were eliminated by leaching of the products at ambient temperature.

36 MATERIALS SCIENCE↗

Charged particles produced in quark and gluon jets in proton-proton collisions

We investigate whether and how different fragmentation properties of quarks and gluons affect identified particle spectra. We present a systematic study of {pi}, K and p production in minimum bias (inelastic, non-diffractive), two- and three-jet events at RHIC, Tevatron and LHC energies. Through the study of two- and three-jet events and various jet-production channels we can directly access the fragmentation properties of quark and gluon jets. We present MC estimate for the contribution of quark and gluon jets to individual particle species spectra, that can be compared to experimental results and test our current knowledge of the physics behind particle production inside jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

I-NERI-2007-004-K, Development and Characterization of New High-Level Waste Forms for Achieving Waste Minimization from Pyroprocessing

Work describe in this report represents the final year activities for the 3-year International Nuclear Energy Research Initiative (I-NERI) project: Development and Characterization of New High-Level Waste Forms for Achieving Waste Minimization from Pyroprocessing. Used electrorefiner salt that contained actinide chlorides and was highly loaded with surrogate fission products was processed into three candidate waste forms. The first waste form, a high-loaded ceramic waste form is a variant to the CWF produced during the treatment of Experimental Breeder Reactor-II used fuel at the Idaho National Laboratory (INL). The two other waste forms were developed by researchers at the Korean Atomic Energy Research Institute (KAERI). These materials are based on a silica-alumina-phosphate matrix and a zinc/titanium oxide matrix. The proposed waste forms, and the processes to fabricate them, were designed to immobilize spent electrorefiner chloride salts containing alkali, alkaline earth, lanthanide, and halide fission products that accumulate in the salt during the processing of used nuclear fuel. This aspect of the I-NERI project was to demonstrate 'hot cell' fabrication and characterization of the proposed waste forms. The outline of the report includes the processing of the spent electrorefiner salt and the fabrication of each of the three waste forms. Also described is the characterization of the waste forms, and chemical durability testing of the material. While waste form fabrication and sample preparation for characterization must be accomplished in a radiological hot cell facility due to hazardous radioactivity levels, smaller quantities of each waste form were removed from the hot cell to perform various analyses. Characterization included density measurement, elemental analysis, x-ray diffraction, scanning electron microscopy and the Product Consistency Test, which is a leaching method to measure chemical durability. Favorable results from this demonstration project will provide additional options for fission product immobilization and waste management associated the electrochemical/pyrometallurgical processing of used nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗