Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Denver”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Airport surveillance using a solid state coherent lidar

The utility of solid state coherent LIDAR was assessed in the following application areas: (1) wake vortices; (2) dry and wet microburst windshear; (3) gusts; (4) vertical and general wind profiling; and (5) cloud ceiling. The system performance model described was based on a concept definition, system sizing, measurement planning, and algorithm and graphics display development. Data were collected at the Kennedy Space Center and the National Weather Service site adjacent to Denver's Stapleton Airport.

Huffaker, R. Milton↗
NASA NTRS1994

Relationship of ozone and carbon monoxide over North America

Observations at sites in eastern North America show a strong correlation between O3 and CO concentrations in summer, with a consistent slope DeltaO3/DeltaCO approximately = 0.3. Observations in the aged Denver plume at Niwot Ridge, Colorado, also show a strong correlation but with DeltaO3/DeltaCO = 0.15. These data offer a sensitive test for evaluating the ability of photochemical models to simulate production of O3 over North America and its export to the global atmosphere. Application to the Harvard/Goddard Institute for Space Studies three-dimensional, continental-scale model shows that the model gives a good simulation of the observed O3-CO correlations and of the associated DeltaO3/DeltaCO. This successful simulation lends support to model estimates of 6 Gmol/d for the net O3 production in the U.S. boundary layer in summer (corresponding to a net O3 production efficiency of 5.5, which is the number of O3 molecules produced per molecule of NOx consumed) and 70% for the fraction of the net production that is exported to the global atmosphere. Export of U.S. pollution appears to make a significant contribution to total tropospheric O3 over the northern hemisphere in summer. Simple interpretation of observed DeltaO3/DeltaCO as an O3/CO anthropogenic enhancement ratio is shown to underestimate substantially anthropogenic O3 production, because O3 and CO concentrations are negatively correlated in the absence of photochemistry. It is also shown that concurrent observations of DeltaO3/DeltaCO and DeltaO3/Delta(NO(y)-NO(x)) ratios can be used to impose lower and upper limits on the net O3 production efficiency.

Chin, Mian↗
NASA NTRS1994

Counting Particles Emitted by Stratospheric Aircraft and Measuring Size of Particles Emitted by Stratospheric Aircraft

There were two principal objectives of the cooperative agreement between NASA and the University of Denver. The first goal was to modify the design of the ER-2 condensation nuclei counter (CNC) so that the effective lower detection limit would be improved at high altitudes. This improvement was sought because, in the instrument used prior to 1993, diffusion losses prevented the smallest detectable particles from reaching the detection volume of the instrument during operation at low pressure. Therefore, in spite of the sensor's ability to detect particles as small as 0.008 microns in diameter, many of these particles were lost in transport to the sensing region and were not counted. Most of the particles emitted by aircraft are smaller than 0.1 micron in diameter. At the start date of this work, May 1990, continuous sizing techniques available on the ER-2 were only capable of detecting particles larger than 0.17 micron. Thus, the second objective of this work was to evaluate candidate sizing techniques in an effort to gain additional information concerning the size of particles emitted by aircraft.

Wilson, James Charles↗
NASA NTRS1995

Noise-Induced Sleep Disturbance in Residences Near Two Civil Airports

A large-scale field study of noise-induced sleep disturbance was conducted in the vicinities of Stapleton International Airport (DEN) and Denver International Airport (DIA) in anticipation of the closure of the former and opening of the latter. Both indoor and outdoor measurements of aircraft and other nighttime noises were made during four time periods. Measurements were made in 57 homes located as close as feasible to the runway ends of the two airports. Sleep disturbance was measured by several indices of behaviorally confirmed awakening (button pushes upon awakening) and body movement (as measured with wrist-worn actimeters). A total of 2717 subject-nights of observations were made over the course of the study. Although average noise event levels measured outdoors decreased markedly at DEN after closure of the airport and increased slightly at DIA after its opening, indoor noise event levels varied much less in homes near both airports. No large differences were observed in noise-induced sleep disturbance at either airport. Indoor sound exposure levels of noise events were, however, closely related to and good predictors of actimetrically defined motility and arousal.

Fidell, Sanford↗
NASA NTRS1995

Descent advisor preliminary field test

A field test of the Descent Advisor (DA) automation tool was conducted at the Denver Air Route Traffic Control Center in September 1994. DA is being developed to assist Center controllers in the efficient management and control of arrival traffic. DA generates advisories, based on trajectory predictions, to achieve accurate meter-fix arrival times in a fuel efficient manner while assisting the controller with the prediction and resolution of potential conflicts. The test objectives were to evaluate the accuracy of DA trajectory predictions for conventional- and flight-management-system-equipped jet transports, to identify significant sources of trajectory prediction error, and to investigate procedural and training issues (both air and ground) associated with DA operations. Various commercial aircraft (97 flights total) and a Boeing 737-100 research aircraft participated in the test. Preliminary results from the primary test set of 24 commercial flights indicate a mean DA arrival time prediction error of 2.4 sec late with a standard deviation of 13.1 sec. This paper describes the field test and presents preliminary results for the commercial flights.

Green, Steven M.↗
NASA NTRS1995

Structural Damage Prediction and Analysis for Hypervelocity Impact. UDRI Light Gas Gun Test Data Summaries

The HEX bumper was originally developed for use with the Defensive Shields Demonstration (DSD) Program. The University of Dayton Research Institute was a subcontractor to the Martin Marietta Astronautics Group in Denver Colorado at the time the HEX bumper was designed for use on the DSD Program. The design originated at the University and was essentially made available to interested parties. All HEX bumpers used in the DSD Program were fabricated at the University by rolling sheet stock through a special set of rollers. Two pieces of 3003-H14 aluminum sheet were rolled to produce the bumpers evaluated in Shots 4-1302 and 4-1304. A brief summary of the results of these tests is given in below. Contact prints of the multiple-exposure, orthogonal view radiographs of the debris clouds produced by the tests are attached. A sketch of the HEX bumper design is also attached.

Source record↗
NASA NTRS1996

Smart Material Demonstrators Based on Shape Memory Alloys and Electroceramics

This paper describes the development and characterization of two technology demonstrators that were produced under the auspices of an ARPA sponsored smart materials synthesis and processing effort. The ARPA Smart Materials and Synthesis (SMS) Program was a 2 year, $10M partnership led by Martin Marietta Laboratories - Baltimore and included Lockheed Missiles & Space Co., NRL, AVX Corp., Martin Marietta Astronautics Groups, BDM Federal, Inc., Virginia Tech, Clemson, University of Maryland, Denver University, and The Johns Hopkins University. In order to demonstrate the usefulness of magnetron sputtered shape memory foil and the manufacturability of reliable, reproducible electrostrictive actuators, the team designed a broadband active vibration cancellation device for suppressing the vibration load on delicate instruments and precision pointing devices mounted on orbiting satellites and spacecraft. The results of extensive device characterization and bench testing are discussed. Initial simulation results show excellent control authority and amplitude attenuation over the range of anticipated disturbance frequencies. The SMS Team has also developed an active 1-3 composite comprising micro-electrostrictive actuators embedded in a polymeric matrix suitable for underwater applications such as sonar quieting and listening arrays, and for medical imaging. Follow-on programs employing these technologies are also described.

Cooke, Arther V.↗
NASA NTRS1995

Descent Advisor Preliminary Field Test

A field test of the Descent Advisor (DA) automation tool was conducted at the Denver Air Route Traffic Control Center in September 1994. DA is being developed to assist Center controllers in the efficient management and control of arrival traffic. DA generates advisories, based on trajectory predictions, to achieve accurate meter-fix arrival times in a fuel efficient manner while assisting the controller with the prediction and resolution of potential conflicts. The test objectives were: (1) to evaluate the accuracy of DA trajectory predictions for conventional and flight-management system equipped jet transports, (2) to identify significant sources of trajectory prediction error, and (3) to investigate procedural and training issues (both air and ground) associated with DA operations. Various commercial aircraft (97 flights total) and a Boeing 737-100 research aircraft participated in the test. Preliminary results from the primary test set of 24 commercial flights indicate a mean DA arrival time prediction error of 2.4 seconds late with a standard deviation of 13.1 seconds. This paper describes the field test and presents preliminary results for the commercial flights.

Green, Steven M.↗
NASA NTRS1996

Comparison of Separation Shock for Explosive and Nonexplosive Release Actuators on a Small Spacecraft Panel

Functional shock, safety, overall system costs, and emergence of new technologies, have raised concerns regarding continued use of pyrotechnics on spacecraft. NASA Headquarters-Office of Chief Engineer requested Langley Research Center (LaRC) study pyrotechnic alternatives using non-explosive actuators (NEA's), and LARC participated with Lockheed Martin Missile and Space Co. (LMMSC)-Sunnyvale, CA in objectively evaluating applicability of some NEA mechanisms to reduce small spacecraft and booster separation event shock. Comparative tests were conducted on a structural simulator using five different separation nut mechanisms, consisting of three pyrotechnics from OEA-Aerospace and Hi-Shear Technology and two NEA's from G&H Technology and Lockheed Martin Astronautics (LMA)-Denver, CO. Multiple actuations were performed with preloads up to 7000 pounds, 7000 being the comparison standard. All devices except LMA's NEA rotary flywheel-nut concept were available units with no added provisions to attenuate shock. Accelerometer measurements were recorded, reviewed, processed into Shock Response Spectra (SRS), and comparisons performed. For the standard preload, pyrotechnics produced the most severe and the G&H NEA the least severe functional shock levels. Comparing all results, the LMA concept produced the lowest levels, with preload limited to approximately 4200 pounds. Testing this concept over a range of 3000 to 4200 pounds indicated no effect of preload on shock response levels. This report presents data from these tests and the comparative results.

Lucy, M. H.↗
NASA NTRS1997

Membrane Transport Phenomena (MTP)

The third semi-annual period of the MTP project has been involved with performing experiments using the Membrane Transport Apparatus (MTA), development of analysis techniques for the experiment results, analytical modeling of the osmotic transport phenomena, and completion of a DC-9 microgravity flight to test candidate fluid cell geometries. Preparations were also made for the MTP Science Concept Review (SCR), held on 13 June 1997 at Lockheed Martin Astronautics in Denver. These activities are detailed in the report.

Mason, Larry W.↗
NASA NTRS1997

In-Situ Propellant Production on Mars: A Sabatier/Electrolysis Demonstration Plant

An efficient, reliable propellant production plant has been developed for use on Mars. Using a Sabatier reactor in conjunction with a water electrolysis system, a complete demonstration plant has produced methane and liquid oxygen from simulated Martian atmosphere. The production plant has demonstrated high efficiency, extended duration production and autonomous operations. This paper presents the results and conclusions relating to eventual use in a Mars sample return mission. This work was funded by the Jet Propulsion Laboratory (JPL). The production plant was built and tested at the Propulsion Center of Lockheed Martin at the Denver Colorado facility.

Clark, David L.↗
NASA NTRS1960

A Summary of Operating Conditions Experienced by Three Military Helicopters and a Mountain-Based Commercial Helicopter

The results of a survey of the flight conditions experienced by three military helicopters engaged in simulated and actual military missions, and a commercial helicopter operated in the mountainous terrain surrounding Denver, CO, are presented. The data, obtained with NASA helicopter VGHN recorders, represent 813 flights or 359 flying hours, and are compared where applicable to previous survey results. The current survey results show that none of the helicopters exceeded the maximum design airspeed. One military helicopter, used for instrument flight training, never exceeded 70 percent of its maximum design airspeed. The rates of climb and descent utilized by the IFR training helicopter and of the mountain-based helicopter were generally narrowly distributed within all the airspeed ranges. The number of landings per hour for all four of the helicopters ranged from 1.6 to 3.3. The turbine-engine helicopter experienced more frequent normal-acceleration increments above a threshold of +/-0.4g (where g is acceleration due to gravity) than the mountain-based helicopter, but the mountain-based helicopter experienced acceleration increments of greater magnitude. Limited rotor rotational speed time histories showed that all the helicopters were operated at normal rotor speeds during all flight conditions.

Connor, Andrew B.↗
NASA NTRS1998

An Operational Wake Vortex Sensor Using Pulsed Coherent Lidar

NASA and FAA initiated a program in 1994 to develop methods of setting spacings for landing aircraft by incorporating information on the real-time behavior of aircraft wake vortices. The current wake separation standards were developed in the 1970's when there was relatively light airport traffic and a logical break point by which to categorize aircraft. Today's continuum of aircraft sizes and increased airport packing densities have created a need for re-evaluation of wake separation standards. The goals of this effort are to ensure that separation standards are adequate for safety and to reduce aircraft spacing for higher airport capacity. Of particular interest are the different requirements for landing under visual flight conditions and instrument flight conditions. Over the years, greater spacings have been established for instrument flight than are allowed for visual flight conditions. Preliminary studies indicate that the airline industry would save considerable money and incur fewer passenger delays if a dynamic spacing system could reduce separations at major hubs during inclement weather to the levels routinely achieved under visual flight conditions. The sensor described herein may become part of this dynamic spacing system known as the "Aircraft VOrtex Spacing System" (AVOSS) that will interface with a future air traffic control system. AVOSS will use vortex behavioral models and short-term weather prediction models in order to predict vortex behavior sufficiently into the future to allow dynamic separation standards to be generated. The wake vortex sensor will periodically provide data to validate AVOSS predictions. Feasibility of measuring wake vortices using a lidar was first demonstrated using a continuous wave (CW) system from NASA Marshall Space Flight Sensor and tested at the Volpe National Transportation Systems Center's wake vortex test site at JFK International Airport. Other applications of CW lidar for wake vortex measurement have been made more recently, including a system developed by the MIT Lincoln Laboratory. This lidar has been used for detailed measurements of wake vortex velocities in support of wake vortex model validation. The first measurements of wake vortices using a pulsed, lidar were made by Coherent Technologies, Inc. (CTI) using a 2 micron solid-state, flashlamp-pumped system operating at 5 Hz. This system was first deployed at Denver's Stapleton Airport. Pulsed lidar has been selected as the baseline technology for an operational sensor due to its longer range capability.

Barker, Ben C., Jr.↗
NASA NTRS1999

Lockheed Martin Skunk Works Single Stage to Orbit/Reusable Launch Vehicle

Lockheed Martin Skunk Works has compiled an Annual Performance Report of the X-33/RLV Program. This report consists of individual reports from all industry team members, as well as NASA team centers. This portion of the report is comprised of a status report of Lockheed Martin's contribution to the program. The following is a summary of the Lockheed Martin Centers involved and work reviewed under their portion of the agreement: (1) Lockheed Martin Skunk Works - Vehicle Development, Operations Development, X-33 and RLV Systems Engineering, Manufacturing, Ground Operations, Reliability, Maintainability/Testability, Supportability, & Special Analysis Team, and X-33 Flight Assurance; (2) Lockheed Martin Technical Operations - Launch Support Systems, Ground Support Equipment, Flight Test Operations, and RLV Operations Development Support; (3) Lockheed Martin Space Operations - TAEM and A/L Guidance and Flight Control Design, Evaluation of Vehicle Configuration, TAEM and A/L Dispersion Analysis, Modeling and Simulations, Frequency Domain Analysis, Verification and Validation Activities, and Ancillary Support; (4) Lockheed Martin Astronautics-Denver - Systems Engineering, X-33 Development; (5) Sanders - A Lockheed Martin Company - Vehicle Health Management Subsystem Progress, GSS Progress; and (6) Lockheed Martin Michoud Space Systems - X-33 Liquid Oxygen (LOX) Tank, Key Challenges, Lessons Learned, X-33/RLV Composite Technology, Reusable Cyrogenic Insulation (RCI) and Vehicle Health Monitoring, Main Propulsion Systems (MPS), Structural Testing, X-33 System Integration and Analysis, and Cyrogenic Systems Operations.

Source record↗
NASA NTRS1999

In Situ Resource Utilization (ISRU 3) Technical Interchange Meeting: Abstracts

This volume contains abstracts that have been accepted for presentation at the In Situ Resource Utilization (ISRU III) Technical Interchange Meeting, February 11-12, 1999, hosted by the Lockheed Martin Astronautics Waterton Facility, Denver, Colorado. Administration and publication support for this meeting were provided by the staff of the Publications and Program Services Department at the Lunar and Planetary Institute.

Source record↗
NASA NTRS1999

Highly Resolved Aerosol Measurements from High Altitude Platforms

The University of Denver agreed to develop and fabricate two instruments for the characterization of submicron aerosol. The instruments were to be light weight for use on remotely-piloted aircraft or balloons. The instruments were to provide accurate size measurements of size distributions in the size range from 0.07 to 2 micrometers in diameter and concentration measurements in the size range approximately 0.01 to 2 micrometers in diameter. The instruments constructed under this cooperative agreement respond quite nearly as expected and meet the objective of being light and compact. One has been used for ground based and low altitude studies and the other will be deployed in high altitude studies this winter.

Wilson, James Charles↗
NASA NTRS1999

Collection and Analysis of Aircraft Emitted Particles

The University of Denver Aerosol Group proposed to adapt an impactor system for the collection of particles emitted by aircraft. The collection substrates were electron microscope grids which were analyzed by Dr. Pat Sheridan using a transmission electron microscope. The impactor was flown in the SNIFF behind aircraft and engine emissions were sampled. This report details the results of that work.

Wilson, James Charles↗
NASA NTRS1987

Infrared Measurements of Several Nitrogen Species Above the South Pole in December 1980 and November - December 1986

In December 1980 and November-December 1986, the University of Denver atmospheric spectroscopy group recorded numerous high-resolution infrared solar absorption spectra from the Amundsen-Scott south pole station. These spectra were obtained by Frank J. Murcray and Frank H. Murcray with a Michelson-type Fourier transform spectrometer and show absorption features of a number of minor and trace atmospheric gases with a minimum of atmospheric water vapor absorption. Quantifications of the total column amounts of O3, CH4, N2O, and H2O from the 1980 observations and RCI from the 1986 observations have been reported along with an atlas of the 750-960/ cm spectral region. In the present study, we report measurements of HNO3 total column amounts deduced from both data sets and NO, and NO2 total column amounts from the 1986 data set. Nitric acid may be important in the chemistry which creates the spring Antarctic ozone minimum, since it may condense in the cold winter polar stratosphere and become the dominant component of polar stratospheric clouds. The present measurements were obtained shortly after the austral spring ozone minimum and define for the first time the ambient levels of these nitrogen species immediately following the breakup of the polar vortex.

Murcray, F. J.↗