Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DSC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Microphase separation in copolymers of hydrophilic PEG blocks and hydrophobic tyrosine-derived segments using simultaneous SAXS/WAXS/DSC

Hydration- and temperature-induced microphase separations were investigated by simultaneous small- and wide-angle X-ray scattering (SAXS and WAXS) and differential scanning calorimetry (DSC) in a family of copolymers in which hydrophilic poly(ethylene glycol) (PEG) blocks are inserted randomly into a hydrophobic polymer made of either desaminotyrosyl-tyrosine ethyl ester (DTE) or iodinated I{sub 2}DTE segments. Iodination of the tyrosine rings in I{sub 2}DTE increased the X-ray contrast between the hydrophobic and hydrophilic segments in addition to facilitating the study of the effect of iodination on microphase separation. The formation of phase-separated, hydrated PEG domains is of considerable significance as it profoundly affects the polymer properties. The copolymers of DTE (or I{sub 2}DTE) and PEG are a useful model system, and the findings presented here may be applicable to other PEG-containing random copolymers. In copolymers of PEG and DTE and I{sub 2}DTE, the presence of PEG depressed the glass transition temperature (T{sub g}) of the copolymer relative to the homopolymer, poly(DTE carbonate), and the DTE/I{sub 2}DTE segments hindered the crystallization of the PEG segments. In the dry state, at large PEG fractions (>70 vol%), the PEG domains self-assembled into an ordered structure with 14-18 nm distance between the domains. These domains gave rise to a SAXS peak at all temperatures in the iodinated polymers, but only above the T{sub g} in non-iodinated polymers, due to the unexpected contrast-match between the crystalline PEG domains and the glassy DTE segments. Irrespective of whether PEG was crystalline or not, immersion of these copolymers in water resulted in the formation of hydrated PEG domains that were 10-20 nm apart. Since both water and the polymer chains must be mobile for the phase separation to occur, the PEG domains disappeared when the water froze, and reappeared as the ice began to melt. This transformation was reversible, and showed hysteresis as did the melting of ice and freezing of the water incorporated into the polymer. PEG-water complexes and PEG-water eutectics were observed in WAXS and DSC scans, respectively.

36 MATERIALS SCIENCE↗

A power compensated differential scanning calorimeter for protein stability characterization

This study presented a power compensated MEMS differential scanning calorimeter (DSC) for protein stability characterization. In this microfabricated sensor, PDMS (Polydimethylsiloxane) and polyimide were used to construct the adiabatic chamber (1 μL) and temperature sensitive vanadium oxide was used as the thermistor material. A power compensation system was implemented to maintain the sample and reference at the same temperature. The resolution study and step response characterization indicated the high sensitivity (6 V/W) and low noise level (60 μk) of the device. The test with IgG1 antibody (mAb1) samples showed clear phase transitions and the data was confirmed to be reasonable by comparing it with the results of commercial DSC’s test. Finally, this device used ~1uL sample amount and could complete the scanning process in 4 min, significantly increasing the throughput of the bimolecular thermodynamics study like drug formulation process.

36 MATERIALS SCIENCE↗

Microencapsulated n-octacosane as phase change material for thermal energy storage

This study deals with preparation and characterization of polymethylmetracrylate (PMMA) microcapsules containing n-octacosane as phase change material for thermal energy storage. The surface morphology, particle size and particle size distribution (PSD) were studied by scanning electron microscopy (SEM). The chemical characterization of PMMA/octacosane microcapsules was made by FT-IR spectroscopy method. Thermal properties and thermal stability of microencapsulated octacosane were determined using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). The melting and freezing temperatures and the latent heats of the microencapsulated octacosane as PCM were measured as 50.6 and 53.2 C, 86.4 and -88.5 J/g, respectively, by DSC analysis. TGA analysis indicated that the microencapsulated octacosane degrade in two steps and had good chemical stability. Thermal cycling test shows that the microcapsules have good thermal reliability with respect to the accelerated thermal cycling. Based on the results, it can be considered that the microencapsulated octacosane have good energy storage potential. (author)

25 ENERGY STORAGE↗

The fabrication of efficiency-improved W-series interconnect type of module by balancing the performance of single cells

Large dye-sensitized solar cells (DSCs) are usually fabricated as module types instead of single cell types, because the overall efficiency of an area-expanded single DSC is decreased by its large surface resistances and low fill factor (FF). The general DSC module designs are the parallel grid, series interconnect, and series monolithic types. The W-series interconnect type of module has some advantages, such as its easy fabrication and simple structure. Moreover, it also avoids the reduction in the FF. However, it has an efficiency imbalance between the single cells, because of the discrepancy in their luminous intensity. Therefore, the fabrication of the W-series interconnect type of module will be cost-effective only if the problem of its efficiency imbalance is solved. In this study, the thickness of the Pt layer, which has a very high reflection rate, and that of the electrolyte layer are minimized and the transmitted light is reflected by a metallic thin film in order to increase the number of photons absorbed by the dye molecules in the module. As a result, the performance of the efficiency-balanced W-module is improved by approximately 1% as compared to that of the conventional module. (author)

14 SOLAR ENERGY↗

Aging behavior of polymeric solar absorber materials - Part 1: Engineering plastics

In this series of two papers, various polymeric materials are investigated as to their potential applicability as absorber materials for solar thermal collectors. The focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 C in water up to 16,000 h) and stagnation conditions (140 C in air up to 500 h) typical for northern climate. The materials supplied or produced as polymer films were first characterized in the unaged state and then for different states of aging by differential scanning calorimetry (DSC), by size exclusion chromatography (SEC) and by mechanical tensile tests. Physical aging phenomena were studied by DSC, SEC analysis provided information on chemical degradation of the materials. In addition, physical and chemical aging were both analyzed via the small and large strain mechanical behavior. While the present Part 1 of this paper series deals with the aging behavior of engineering plastics, including two amorphous polymers (a polyphenylene ether polystyrene blend (PPE + PS) and polycarbonate (PC)) and two semi-crystalline polymers (two types of polyamide 12 (PA12)), the aging behavior of so-called ''commodity'' plastics (PE and PP) is the subject of Part 2. Comparing the two aging conditions, the amorphous materials (PPE + PS and PC) turned out to be more prone to physical and chemical aging at 140 C in air. In contrast, the semi-crystalline PA12 materials were more strongly affected by exposure to water at 80 C, although to different degrees, depending on the modification. (author)

14 SOLAR ENERGY↗

Aging behavior of polymeric solar absorber materials - Part 2: Commodity plastics

In this series of two papers, various polymeric materials are investigated as to their potential applicability as absorber materials for solar thermal collectors. While Part 1 of this paper series deals with the aging behavior of engineering plastics, including two amorphous polymers (PPE + PS) and (PC) and two semi-crystalline polymers (two types of PA12), the present Part 2 treats the aging behavior of semi-crystalline so-called ''commodity'' plastics (two types of crosslinked polyethylene (PE-X) and two types of polypropylene (PP)). As in Part 1, the focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 C in water up to 16,000 h) and stagnation conditions (140 C in air up to 500 h) typical for northern climate. The materials supplied or produced as polymer films were first characterized in the unaged state and then for different states of aging by differential scanning calorimetry (DSC), by size exclusion chromatography (SEC) and by mechanical tensile tests. DSC was applied primarily to obtain information on physical aging phenomena, whereas SEC analysis was used to characterize chemical degradation of the materials. In addition, physical and chemical aging were both analyzed via the small and large strain mechanical behavior. Comparing the two aging conditions in hot air and hot water, a rather stable mechanical performance profile was found for both PP types over the investigated aging time, which was interpreted in terms of competing physical and chemical aging mechanisms. Analogously such competing mechanisms were also inferred for one of the PE-X materials, while the other exhibited substantial degradation in terms of strain-to-break values for both aging conditions. In principle, both PP and PE-X are promising candidates for black absorber applications in northern climates if proper measures against overheating are taken and when adequately modified. (author)

14 SOLAR ENERGY↗

Alternative polymer separation technology by centrifugal force in a melted state

Highlights: • Waste separation should take place at high purity. • Developed a novel, alternative separation method, where the separation occurred in a melted state by centrifugal forces. • Possibility of separation two different plastics into neat fractions. • High purity fractions were established at granulates and also at prefabricated blend. • Results were verified by DSC, optical microscopy and Raman spectroscopy. - Abstract: In order to upgrade polymer waste during recycling, separation should take place at high purity. The present research was aimed to develop a novel, alternative separation opportunity, where the polymer fractions were separated by centrifugal force in melted state. The efficiency of the constructed separation equipment was verified by two immiscible plastics (polyethylene terephthalate, PET; low density polyethylene, LDPE), which have a high difference of density, and of which large quantities can also be found in the municipal solid waste. The results show that the developed equipment is suitable not only for separating dry blended mixtures of PET/LDPE into pure components again, but also for separating prefabricated polymer blends. By this process it becomes possible to recover pure polymer substances from multi-component products during the recycling process. The adequacy of results was verified by differential scanning calorimetry (DSC) measurement as well as optical microscopy and Raman spectroscopy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Thermal Stability of LiNi x Mn y Co z O 2 Cathode Materials

Here, the thermal evolution of LiNi x Mn y Co z O 2 (NMC) lithium-ion battery electrode materials is examined at various states of charge (SOC) or lithium concentrations for a variety of Ni:Mn:Co ratios or electrode compositions. Synchrotron X-ray diffraction (XRD) combined with Rietveld analysis shows the onset decomposition temperatures of phases, decomposition products, lattice parameters, and phase fractions as a function of composition and SOC. SOC impacts the lattice parameters of the NMC phase, where a collapse of the c-axis in the NMC phases is noted due to lithium extraction. Among the compositions examined, the low-Ni NMC111 uncycled sample (NMC111 0% SOC) exhibited the highest thermal stability, with a decomposition temperature approximately 250 °C higher than that of NMC532 0% and NMC811 0%. When the SOC exceeds 50% (i.e., more than 0.4 mol of Li ions extracted), the influence of Ni content on the decomposition temperature becomes negligible, with decomposition occurring around 250−300 °C for all compositions. Ni content also affects the decomposition pathways: NMC111 tends to first form a TM 3 O 4 -type phase, where TM represents transition metals, before transforming into a TMO-type phase, whereas most of the NMC811 samples directly decompose into the TMO phase. The presence of metallic phases was confirmed by both XRD and thermogravimetric-differential scanning calorimetry (TGA-DSC) analysis, as a result of heating under inert conditions. The TGA-DSC results suggest that metallic phase formation is favored at lower SOC in samples with a higher Ni content. This work provides comprehensive insight into the thermal degradation pathways of NMC materials as a function of composition, SOC, and temperature.

Peng, Jian [Univ. of New South Wales, Sydney, NSW ↗

Simple but tricky: Investigations of terephthalic acid purity obtained from mixed PET waste

In this study, we report for the first time, the basic depolymerization of mixed waste-polyethylene terephthalate (PET) by hydrolysis and subsequent terephthalic acid monomer recovery at high purity using benign reaction conditions. Several conditions were tested for depolymerization such as PET chips size, concentration of aqueous sodium hydroxide (20 or 30%), organic co-solvent (ethylene glycol or ethanol), temperature at which the reaction was run and duration of the heating. More importantly, several batches of PET were utilized as starting materials including a commercial PET, chopped PET obtained from clean bottles whose caps and labels were removed and the purity of the product from each condition was evaluated via nuclear magnetic resonance (1HNMR and 13CNMR), differential scanning calorimetry (DSC) and powder Xray diffraction (XRD). Unsurprisingly, the conversion of PET is dependent on the particle size varying from 100% conversion for fine powder to 73% conversion for (300 µm, mesh 6 – 20 or mesh 14-20). Ethanol appears to be more efficient as a co-solvent than ethylene glycol, with higher PET depolymerization conversions (94% versus 75-80%), shorter reaction times (2h versus 6h) and lower temperatures (80 °C versus 110 °C). The terephthalic acid (TPA) recovered appeared to have only subtle differences among the batches, most notably a pink color when the reaction was run in ethanol/base. The DSC of the compounds produced in ethylene glycol water appear to display a melting point (280-288 °C) while the samples prepared in ethanol as well as a commercial sample did not. Overall, the purity of the various TPA batches is comparable, and similar to commercial TPA, demonstrating the utility of the method to depolymerize realistic waste streams. The method is simple, demonstrated on multigram scale (15-30g) and allows for the complete removal of waste other than PET unaffected by alkaline conditions.

Cosimbescu, Lelia↗

Hyperstoichiometric Uranium Dioxides: Rapid Synthesis and Irradiation-Induced Structural Changes

Uranium dioxide (UO 2 ), the primary fuel for commercial nuclear reactors, incorporates excess oxygen forming a series of hyperstoichiometric oxides. Thin layers of these oxides, such as UO 2.12 , form readily on the fuel surface and influence its properties, performance, and potentially geologic disposal. This work reports a rapid and straightforward combustion process in uranyl nitrate–glycine–water solutions to prepare UO 2.12 nanomaterials and thin films. We also report on the investigation of the structural changes induced in the material by irradiation. Despite the simple processing aspects, the combustion synthesis of UO 2.12 has a sophisticated chemical mechanism involving several exothermic steps. Raman spectroscopy and single-crystal X-ray diffraction (XRD) measurements reveal the formation of a complex compound containing the uranyl moiety, glycine, H 2 O, and NO 3 – groups in reactive solutions and dried combustion precursors. Combustion diagnostic methods, gas-phase mass spectroscopy, differential scanning calorimetry (DSC), and extracted activation energies from DSC measurements show that the rate-limiting step of the process is the reaction of ammonia with nitrogen oxides formed from the decomposition of glycine and uranyl nitrate, respectively. However, the exothermic decomposition of the complex compound determines the maximum temperature of the process. In situ transmission electron microscopy (TEM) imaging and electron diffraction measurements show that the decomposition of the complex compound directly produces UO 2 . The incorporation of oxygen at the cooling stage of the combustion process is responsible for the formation of UO 2.12 . Spin coating of the solutions and brief annealing at 670 K allow the deposition of uniform films of UO 2.12 with thicknesses up to 300 nm on an aluminum substrate. Irradiation of films with Ar 2+ ions (1.7 MeV energy, a fluence of up to 1 × 10 17 ions/cm 2 ) shows unusual defect-simulated grain growth and enhanced chemical mixing of UO 2.12 with the substrate due to the high uranium ion diffusion in films. As a result, the method described in this work allows the preparation of actinide oxide targets for fundamental nuclear science research and studies associated with stockpile stewardship.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modular Approach for the Synthesis of Bottlebrush Diblock Copolymers from Poly(Glycidyl Methacrylate)-block-Poly(Vinyldimethylazlactone) Backbones

A strategy that enables the facile synthesis of bottlebrush block copolymers with flexible backbones was developed. A demonstration of the strategy’s utility was carried out by grafting end-functionalized polymethylmethacrylate (PMMA) and polystyrene (PS) to the dually reactive block copolymer, poly(glycidyl methacrylate)-block-poly(vinyldimethylazlactone) (PGMA-b-PVDMA). Five different bottlebrush diblock copolymers were investigated by size-exclusion chromatography (SEC), 1H NMR, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray scattering methods, atomic force microscopy (AFM), rheology and computational simulations using molecular dynamics (MD), and self-consistent field theory (SCFT). A relationship between the glass transition temperature and the fraction of chain ends was demonstrated by DSC and highlights the potential of this synthetic method to tailor polymer properties. All five samples were found to be in a disordered phase exhibiting multiscale structures revealed by two broad peaks in small-angle X-ray scattering (SAXS) that can be attributed to graft-to-graft and backbone-to-backbone density correlations using MD simulations. The SCFT-based simulations justify the observation of a disordered phase due to its stabilization by the grafts. Additionally, this modular approach can be easily extended to other grafts, including responsive, conducting, and charged polymers with the prerequisite end groups. The versatility and ease of assembling these functional bottlebrushes constitute a powerful “toolbox” method for the rapid and scalable synthesis of novel bottlebrush block copolymers with desired properties.

36 MATERIALS SCIENCE↗

Proton Conducting Sulfonated Poly(Ionic Liquid) Block Copolymers

Herein, we report the synthesis of proton-conducting sulfonated poly(ionic liquid) block copolymers (S-PILBCPs) containing one block with sulfonic acid (sulfonated styrene, SS) and the other with an IL moiety (vinylbenzylmethylimidazolium bis(trifluoromethylsulfonyl)imide, VBMIm-TFSI) using reversible addition–fragmentation chain-transfer (RAFT) polymerization and post-polymerization modifications (i.e., functionalization, anion exchange reactions, and sulfonation). The S-PILBCPs uniquely conjoin the SS block with mobile protons (H + ) and the PIL block with mobile anions (TFSI – ), where multiple highly desired properties, including high proton conductivity (from the SS block), and high IL-philicity and oxygen solubility (from the PIL block) can exist compartmentally within a microphase separated morphology (evidenced by differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS)). High ion conductivity of 79.7 mS/cm at a PIL block composition of 21.6 mol % was observed at 80 °C and 90% relative humidity (RH) (comparable to the benchmark Nafion ionomer). This work successfully demonstrates the design of S-PILBCPs as a new material platform and showcases its promise as an ionomer for proton exchange membrane fuel cells (PEMFCs) as they simultaneously and compartmentally combine proton conductivity and oxygen solubility. Furthermore, these benefits have recently been leveraged to achieve substantial improvement in oxygen reduction reaction (ORR) activity and subsequently fuel cell performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Dynamical Insights into the Formation Process of a Cross-Linked Polymer Network in Acrylic Adhesives During Thermal Curing

Many modern adhesives, sealants, and coatings rely on the controlled transition from a liquid to a solid state by forming a three-dimensional cross-linked polymer network, often referred to as curing. The curing process, which is initiated by the mixing of reactive components or an external trigger, defines the structure of a network and further controls the final mechanical properties of cured materials. However, the curing mechanism is not fully understood yet due to the lack of experimental tools capable of directly probing the structure and dynamics of a network over relevant time- and length scales. Here, in this paper, we report the curing process of a commercial two-component methyl methacrylate (MMA) adhesive using in operando X-ray photon correlation spectroscopy (XPCS), a method that closely simulates the target manufacturing environment of the adhesive. The results are then integrated with those obtained by rheology, differential scanning calorimetry (DSC), and transmission electron microscopy to establish the structure–dynamics–process–property relationship. The XPCS results identify four distinct stages in the curing process after the mixing, extrusion, and deposition of the acrylic adhesive: (i) At a cure time (or “aging time”, t age ) of less than 1 min, nanodomains of polymerized MMA are formed within a liquid monomeric MMA matrix. The average size is several nm and remains constant over t age , while the dynamics of the nanodomains are slowed down with t age due to an increase in the viscosity of the MMA matrix. (ii) After t age > 1 min, the size of the nanodomains increases with t age until the gel point (= 6.3 min after mixing as determined by rheology). The dynamics of the nanodomains also increase due to the heat generated by the exothermic reaction. (iii) At the gel point, the nanodomains begin to interconnect each other, resulting in a network structure with a characteristic length of about 100 nm. This characteristic network size does not change for the rest of the curing process up to t age = 500 min. The dynamics of the network structure, however, show a rapid slowing down with t age up to t age ≈ 12 min, corresponding to the onset of vitrification (as determined by rheology). (iv) At t age > 12 min, when the DSC and rheology data can no longer provide meaningful information, the XPCS data show a further slowing down of the network dynamics associated with vitrification. Our results provide rich and complex insights into the physics and material design of thermosets in commercially relevant processes, which are essential for future industrial applications.

36 MATERIALS SCIENCE↗

Phase Behavior of Pyrene and Vinyl Polymers with Aromatic Side Groups

The phase behavior and thermodynamic properties of mixtures of pyrene and model vinyl polymers with and without aromatic side groups are investigated using differential scanning calorimetry (DSC) measurements. The melting temperature and associated heat of melting of the pyrene crystals in the mixtures are utilized to extract the effective interaction parameters χ and the composition of polymer-rich phases, respectively. The $χ$ of pyrene mixed with polymers with aromatic side groups investigated in this study, polystyrene, poly(2-vinylpyridine), and poly(3-vinylanisole), is less than 0.5 at the melting point of the pyrene crystals, suggesting that pyrene and the polymers with aromatic sides groups are enthalpically compatible, likely due to aromatic $π–π$ interactions. In contrast, the $χ$ of pyrene mixed with poly(1,4-isoprene) or poly(ethylene-alt-propylene) is larger than 0.5. The DSC measurements also enable characterization of the composition of polymer-rich phases. Interestingly, the polymers with aromatic side groups are found to have more pronounced miscibility with pyrene at symmetric compositions.

36 MATERIALS SCIENCE↗

Liquid-Crystalline Phase Behavior in Polypeptoid Diblock Copolymers

Polypeptoid homopolymers and block copolymers undergo thermal transitions in the solid state that can be detected by differential scanning calorimetry (DSC), but so far there is neither consensus on the underpinnings of the observed thermal transitions nor consensus on the expected number of transitions. We synthesized a series of polypeptoid diblock copolymers containing hydrophobic alkyl side chains and hydrophilic ethylene oxide side chains, systematically varying side-chain length (S), backbone main-chain length (N), block copolymer composition (n/m), and N-terminal group, and studied their thermal transitions by a combination of X-ray scattering and DSC. The thermal transitions are largely unaffected by S, N, and n/m but strongly affected by the N-terminal group. Block copolymers with an acetylated N-terminus exhibit two thermal transitions. The low temperature thermal transition is due to a transition from a crystalline phase to a sanidic liquid crystalline mesophase. The molecules adopt planar, boardlike conformations and are arranged in a rectangular crystal lattice with extended backbones that run parallel to each other. The side chains extend on either side and are located within the plane of the backbone. The liquid crystalline phase is characterized by conformational disorder in dimensions normal to the molecular plane. The high temperature thermal transition is due to melting of the liquid crystalline phase to give an isotropic phase. Block copolymers with a free N-terminus (non-acetylated) exhibit only one thermal transition and similar out-of-plane conformational disorder. Finally, this disorder appears to be due to a difference in the pendant side chain display angle of the terminal nitrogen atom.

36 MATERIALS SCIENCE↗

Thienopyrroledione-Based Photosensitizers as Strong Photoinduced Oxidants: Oxidation of Fe(bpy) 3 2+ in a >1.3 V Dye-Sensitized Solar Cell

The creation of visible light absorbing organic dyes as strong photoinduced oxidants is needed for many potential applications in energy production and storage. In order to access more positive potentials, the electron deficient thienopyrroledione building block is promising as a π-bridge combined with weak aryl-ether donor groups and the phenyl-cyanoacetic acid acceptor group. The thienopyrroledione (TPD) building block is compared to the ubiquitous benzothiadiazole (BTD) building block which was recently used in a dye-sensitized solar cell (DSC) device with >1.4 V photovoltage output. The variation in dye donor group is studied through UV-Vis absorption spectroscopy and electrochemical methods both in solution and on TiO2 films. The TPD building block resulted in a more positive ground state and excited state oxidation potential, a higher photocurrent (up to 3.5 mA/cm 2 ), and a higher power conversion efficiency (up to 2.9%) than a BTD analogue while retaining comparable photovoltages (~1.3 V versus ~1.4 V). Computational analysis was used to better understand the optical properties of the thienopyrroledione-based dyes showing overlap of orbitals at the TPD bridge in the S 0 and S 1 states. The dyes were analyzed in high voltage-DSC devices with a challenging to oxidize redox shuttle, [Fe(bpy) 3 ] 2+ , at 1.37 V versus NHE.

25 ENERGY STORAGE↗

Surface-Functionalized Cellulose Nanocrystals as Nanofillers for Crosslinking Processes: Implications for Thermosetting Resins

Understanding the response of fillers in the epoxy resin crosslinking process and characterizing polymer–filler dynamics are the key features that guide the engineering of new thermosetting resin composites. Here, in this work, X-ray photon correlation spectroscopy (XPCS) is used as a thermal analysis tool to track the microscopic changes occurring during the cure of a functionalized cellulose nanocrystal (mCNC)–epoxy composite. In contrast, traditional methods such as differential scanning calorimetry (DSC) and curing rheology are used to understand the kinetics and properties on macroscopic length scales. Of interest is the influence of the mCNC on the curing kinetics and properties of the thermosetting resin. Two levels of modification (increasing hydrophobicity) were chosen to observe the effect of functionalization. Before cure, the highly functionalized CNC (mCNC3) shows a 44% increase in complex viscosity (η*), while the less functionalized CNC (mCNC2) shows a η* value similar to that of the neat resin. As the cure cycle progresses, results from DSC, rheology, and XPCS further show the enhancement in dispersion for mCNC3. The results show a clear difference in the maximum drift velocity, maximum heat flow, and complex viscosity during the ramp to the isothermal cure temperature (T cure ). Such results suggest that mCNC3 contains a well-dispersed network of particles due to the higher level of functionalization. During T cure , a transition in elastic modulus (G') occurs only for the highly functionalized CNC particle system. We believe that heat-induced aggregation occurs, and the crosslinked resin ultimately dominates the macroscopic properties of the final cured system for all samples. The results from the three techniques are in good agreement and showcase XPCS as a beneficial experimental tool for characterizing the microscopic dynamics of particulate-filled thermosetting resins. Hence, we envision this to be a fundamental curing study for the design of thermosetting resin composites.

36 MATERIALS SCIENCE↗