Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOUG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

BAL OUTFLOW CONTRIBUTION TO AGN FEEDBACK: FREQUENCY OF S IV OUTFLOWS IN THE SDSS

We present a study of broad absorption line (BAL) quasar outflows that show S IV {lambda}1063 and S IV* {lambda}1073 troughs. The fractional abundances of S IV and C IV peak at similar value of the ionization parameter, implying that they arise from the same physical component of the outflow. Detection of the S IV* troughs will allow us to determine the distance to this gas with higher resolution and higher signal-to-noise spectra, therefore providing the distance and energetics of the ubiquitous C IV BAL outflows. In our bright sample of 156 SDSS quasars, 14% show C IV and 1.9% S IV troughs, which are consistent with a fainter magnitude sample with twice as many objects. One object in the fainter sample shows evidence of a broad S IV trough without any significant trough present from the excited state line, which implies that this outflow could be at a distance of several kpc. Given the fractions of C IV and S IV, we establish firm limits on the global covering factor on S IV that ranges from 2.8% to 21% (allowing for the k-correction). Comparison of the expected optical depth for these ions with their detected percentage suggests that these species arise from common outflows with a covering factor closer to the latter.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

A 10 kpc SCALE SEYFERT GALAXY OUTFLOW: HST/COS OBSERVATIONS OF IRAS F22456-5125

We present analysis of the UV spectrum of the low-z AGN IRAS F22456-5125 obtained with the Cosmic Origins Spectrograph on board the Hubble Space Telescope. The spectrum reveals six main kinematic components, spanning a range of velocities of up to 800 km s{sup -1}, which for the first time are observed in troughs associated with C II, C IV, N V, Si II, Si III, Si IV, and S IV. We also obtain data on the O VI troughs, which we compare to those available from an earlier Far Ultraviolet Spectroscopic Explorer epoch. Column densities measured from these ions allow us to derive a well-constrained photoionization solution for each outflow component. Two of these kinematic components show troughs associated with transitions from excited states of Si II and C II. The number density inferred from these troughs, in combination with the deduced ionization parameter, allows us to determine the distance to these outflow components from the central source. We find these components to be at a distance of {approx}10 kpc. The distances and the number densities derived are consistent with the outflow being part of a galactic wind.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

ASPECT RATIO DEPENDENCE OF THE FREE-FALL TIME FOR NON-SPHERICAL SYMMETRIES

We investigate the collapse of non-spherical substructures, such as sheets and filaments, which are ubiquitous in molecular clouds. Such non-spherical substructures collapse homologously in their interiors but are influenced by an edge effect that causes their edges to be preferentially accelerated. We analytically compute the homologous collapse timescales of the interiors of uniform-density, self-gravitating filaments and find that the homologous collapse timescale scales linearly with the aspect ratio. The characteristic timescale for an edge-driven collapse mode in a filament, however, is shown to have a square-root dependence on the aspect ratio. For both filaments and circular sheets, we find that selective edge acceleration becomes more important with increasing aspect ratio. In general, we find that lower dimensional objects and objects with larger aspect ratios have longer collapse timescales. We show that estimates for star formation rates, based upon gas densities, can be overestimated by an order of magnitude if the geometry of a cloud is not taken into account.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2012

FILAMENTARY STAR FORMATION: OBSERVING THE EVOLUTION TOWARD FLATTENED ENVELOPES

Filamentary structures are ubiquitous from large-scale molecular clouds (a few parsecs) to small-scale circumstellar envelopes around Class 0 sources ({approx}1000 AU to {approx}0.1 pc). In particular, recent observations with the Herschel Space Observatory emphasize the importance of large-scale filaments (a few parsecs) and star formation. The small-scale flattened envelopes around Class 0 sources are reminiscent of the large-scale filaments. We propose an observationally derived scenario for filamentary star formation that describes the evolution of filaments as part of the process for formation of cores and circumstellar envelopes. If such a scenario is correct, small-scale filamentary structures (0.1 pc in length) with higher densities embedded in starless cores should exist, although to date almost all the interferometers have failed to observe such structures. We perform synthetic observations of filaments at the prestellar stage by modeling the known Class 0 flattened envelope in L1157 using both the Combined Array for Research in Millimeter-wave Astronomy (CARMA) and the Atacama Large Millimeter/Submillimeter Array (ALMA). We show that with reasonable estimates for the column density through the flattened envelope, the CARMA D array at 3 mm wavelengths is not able to detect such filamentary structure, so previous studies would not have detected them. However, the substructures may be detected with the CARMA D+E array at 3 mm and the CARMA E array at 1 mm as a result of more appropriate resolution and sensitivity. ALMA is also capable of detecting the substructures and showing the structures in detail compared to the CARMA results with its unprecedented sensitivity. Such detection will confirm the new proposed paradigm of non-spherical star formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

MAJOR CONTRIBUTOR TO AGN FEEDBACK: VLT X-SHOOTER OBSERVATIONS OF S IV BALQSO OUTFLOWS

We present the most energetic BALQSO outflow measured to date, with a kinetic luminosity of at least 10{sup 46} erg s{sup -1}, which is 5% of the bolometric luminosity of this high Eddington ratio quasar. The associated mass-flow rate is 400 solar masses per year. Such kinetic luminosity and mass-flow rate should provide strong active galactic nucleus feedback effects. The outflow is located at about 300 pc from the quasar and has a velocity of roughly 8000 km s{sup -1}. Our distance and energetic measurements are based in large part on the identification and measurement of S IV and S IV* broad absorption lines (BALs). The use of this high-ionization species allows us to generalize the result to the majority of high-ionization BALQSOs that are identified by their C IV absorption. We also report the energetics of two other outflows seen in another object using the same technique. The distances of all three outflows from the central source (100-2000 pc) suggest that we observe BAL troughs much farther away from the central source than the assumed acceleration region of these outflows (0.01-0.1 pc).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

CONTINUUM VARIABILITY OF DEEPLY EMBEDDED PROTOSTARS AS A PROBE OF ENVELOPE STRUCTURE

Stars may be assembled in large growth spurts; however the evidence for this hypothesis is circumstantial. Directly studying the accretion at the earliest phases of stellar growth is challenging because young stars are deeply embedded in optically thick envelopes, which have spectral energy distributions that peak in the far-IR, where observations are difficult. In this paper, we consider the feasibility of detecting accretion outbursts from these younger stars by investigating the timescales for how the protostellar envelope responds to changes in the emission properties of the central source. The envelope heats up in response to an outburst, brightening at all wavelengths and with the emission peak moving to shorter wavelengths. The timescale for this change depends on the time for dust grains to heat and re-emit photons and the time required for the energy to escape the inner, optically thick portion of the envelope. We find that the dust response time is much shorter than the photon propagation time and thus the timescale over which the emission varies is set by time delays imposed by geometry. These times are hours to days near the peak of the spectral energy distribution and weeks to months in the sub-mm. The ideal location to quickly detect continuum variability is therefore in the mid- to far-IR, near the peak of the spectral energy distribution, where the change in emission amplitude is largest. Searching for variability in sub-mm continuum emission is also feasible, though with a longer time separation and a weaker relationship between the amount of detected emission amplitude and change in central source luminosity. Such observations would constrain accretion histories of protostars and would help to trace the disk/envelope instabilities that lead to stellar growth.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

Further evidence for a supermassive black hole mass-pitch angle relation

We present new and stronger evidence for a previously reported relationship between galactic spiral arm pitch angle P (a measure of the tightness of spiral structure) and the mass M {sub BH} of a disk galaxy's nuclear supermassive black hole (SMBH). We use an improved method to accurately measure the spiral arm pitch angle in disk galaxies to generate quantitative data on this morphological feature for 34 galaxies with directly measured black hole masses. We find a relation of log (M/M {sub ☉}) = (8.21 ± 0.16) – (0.062 ± 0.009)P. This method is compared with other means of estimating black hole mass to determine its effectiveness and usefulness relative to other existing relations. We argue that such a relationship is predicted by leading theories of spiral structure in disk galaxies, including the density wave theory. We propose this relationship as a tool for estimating SMBH masses in disk galaxies. This tool is potentially superior when compared to other methods for this class of galaxy and has the advantage of being unambiguously measurable from imaging data alone.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2013

CORRELATING INFALL WITH DEUTERIUM FRACTIONATION IN DENSE CORES

We present a survey of HCO{sup +} (3-2) observations pointed toward dense cores with previous measurements of N(N{sub 2}D{sup +})/N(N{sub 2}H{sup +}). Of the 26 cores in this survey, 5 show the spectroscopic signature of outward motion, 9 exhibit neither inward nor outward motion, 11 appear to be infalling, and 1 is not detected. We compare the degree of deuterium fractionation with infall velocities calculated from the HCO{sup +} spectra and find that those cores with [D]/[H] > 0.1 are more likely to have the signature of inward motions than cores with smaller [D]/[H] ratios. Infall motions are also much more common in cores with masses exceeding their thermal Jeans masses. The fastest infall velocity measured belongs to one of the two protostellar cores in our survey, L1521F, and the observed motions are typically on the order of the sound speed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Synthetic observations of the evolution of starless cores in a molecular cloud simulation: Comparisons with JCMT data and predictions for alma

Interpreting the nature of starless cores has been a prominent goal in star formation for many years. In order to characterize the evolutionary stages of these objects, we perform synthetic observations of a numerical simulation of a turbulent molecular cloud. We find that nearly all cores that we detect are associated with filaments and eventually form protostars. We conclude that observed starless cores that appear Jeans unstable are only marginally larger than their respective Jeans masses (within a factor of three). We note single dish observations such as those performed with the James Clerk Maxwell Telescope appear to miss significant core structure on small scales because of beam averaging. Finally, we predict that interferometric observations with Atacama Large Millimeter Array Cycle 1 will resolve the important small-scale structure, which has so far been missed by millimeter wavelength observations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

ALMA observations of the Orion proplyds

We present Atacama Large Millimeter/submillimeter Array (ALMA) observations of protoplanetary disks ('proplyds') in the Orion Nebula Cluster. We imaged five individual fields at 856 μm containing 22 Hubble Space Telescope (HST)-identified proplyds and detected 21 of them. Eight of those disks were detected for the first time at submillimeter wavelengths, including the most prominent, well-known proplyd in the entire Orion Nebula, 114-426. Thermal dust emission in excess of any free-free component was measured in all but one of the detected disks, and ranged between 1 and 163 mJy, with resulting disk masses of 0.3-79 M {sub jup}. An additional 26 stars with no prior evidence of associated disks in HST observations were also imaged within the 5 fields, but only 2 were detected. The disk mass upper limits for the undetected targets, which include OB stars, θ{sup 1} Ori C, and θ{sup 1} Ori F, range from 0.1 to 0.6 M {sub jup}. Combining these ALMA data with previous Submillimeter Array observations, we find a lack of massive (≳3 M {sub jup}) disks in the extreme-UV-dominated region of Orion, within 0.03 pc of θ{sup 1} Ori C. At larger separations from θ{sup 1} Ori C, in the far-UV-dominated region, there is a wide range of disk masses, similar to what is found in low-mass star forming regions. Taken together, these results suggest that a rapid dissipation of disk masses likely inhibits potential planet formation in the extreme-UV-dominated regions of OB associations, but leaves disks in the far-UV-dominated regions relatively unaffected.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

ALMA observations of a misaligned binary protoplanetary disk system in Orion

We present Atacama Large Millimeter/Submillimeter Array (ALMA) observations of a wide binary system in Orion, with projected separation 440 AU, in which we detect submillimeter emission from the protoplanetary disks around each star. Both disks appear moderately massive and have strong line emission in CO 3-2, HCO{sup +} 4-3, and HCN 3-2. In addition, CS 7-6 is detected in one disk. The line-to-continuum ratios are similar for the two disks in each of the lines. From the resolved velocity gradients across each disk, we constrain the masses of the central stars, and show consistency with optical-infrared spectroscopy, both indicative of a high mass ratio ∼9. The small difference between the systemic velocities indicates that the binary orbital plane is close to face-on. The angle between the projected disk rotation axes is very high, ∼72°, showing that the system did not form from a single massive disk or a rigidly rotating cloud core. This finding, which adds to related evidence from disk geometries in other systems, protostellar outflows, stellar rotation, and similar recent ALMA results, demonstrates that turbulence or dynamical interactions act on small scales well below that of molecular cores during the early stages of star formation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

Protoplanetary disk masses in the young NGC 2024 cluster

We present the results from a Submillimeter Array survey of the 887 μm continuum emission from the protoplanetary disks around 95 young stars in the young cluster NGC 2024. Emission was detected from 22 infrared sources, with flux densities from ∼5 to 330 mJy; upper limits (at 3σ) for the other 73 sources range from 3 to 24 mJy. For standard assumptions, the corresponding disk masses range from ∼0.003 to 0.2 M{sub ⊙}, with upper limits at 0.002–0.01 M{sub ⊙}. The NGC 2024 sample has a slightly more populated tail at the high end of its disk mass distribution compared to other clusters, but without more information on the nature of the sample hosts it remains unclear if this difference is statistically significant or a superficial selection effect. Unlike in the Orion Trapezium, there is no evidence for a disk mass dependence on the (projected) separation from the massive star IRS 2b in the NGC 2024 cluster. We suggest that this is due to either the cluster youth or a comparatively weaker photoionizing radiation field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

ALMA observations of the largest proto-planetary disk in the Orion Nebula, 114–426: A CO silhouette

We present ALMA observations of the largest protoplanetary disk in the Orion Nebula, 114–426. Detectable 345 GHz (856 μm) dust continuum is produced only in the 350 AU central region of the ∼1000 AU diameter silhouette seen against the bright Hα background in Hubble Space Telescope images. Assuming optically thin dust emission at 345 GHz, a gas-to-dust ratio of 100, and a grain temperature of 20 K, the disk gas-mass is estimated to be 3.1±0.6 Jupiter masses. If most solids and ices have been incorporated into large grains, however, this value is a lower limit. The disk is not detected in dense-gas tracers such as HCO{sup +} J = 4–3, HCN J = 4–3, or CS = 7–6. These results may indicate that the 114–426 disk is evolved and depleted in some light organic compounds found in molecular clouds. The CO J = 3–2 line is seen in absorption against the bright 50–80 K background of the Orion A molecular cloud over the full spatial extent and a little beyond the dust continuum emission. The CO absorption reaches a depth of 27 K below the background CO emission at V{sub LSR} ≈ 6.7 km s{sup −1} ∼ 0.″52 (210 AU) northeast and 12 K below the background CO emission at V{sub LSR} ≈ 9.7 km s{sup −1} ∼ 0.″34 (140 AU) southwest of the suspected location of the central star, implying that the embedded star has a mass less than 1 M{sub ⊙}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

YOUNG STELLAR OBJECTS IN THE GOULD BELT

We present the full catalog of Young Stellar Objects (YSOs) identified in the 18 molecular clouds surveyed by the Spitzer Space Telescope “cores to disks” (c2d) and “Gould Belt” (GB) Legacy surveys. Using standard techniques developed by the c2d project, we identify 3239 candidate YSOs in the 18 clouds, 2966 of which survive visual inspection and form our final catalog of YSOs in the GB. We compile extinction corrected spectral energy distributions for all 2966 YSOs and calculate and tabulate the infrared spectral index, bolometric luminosity, and bolometric temperature for each object. We find that 326 (11%), 210 (7%), 1248 (42%), and 1182 (40%) are classified as Class 0 + I, Flat-spectrum, Class II, and Class III, respectively, and show that the Class III sample suffers from an overall contamination rate by background Asymptotic Giant Branch stars between 25% and 90%. Adopting standard assumptions, we derive durations of 0.40–0.78 Myr for Class 0 + I YSOs and 0.26–0.50 Myr for Flat-spectrum YSOs, where the ranges encompass uncertainties in the adopted assumptions. Including information from (sub)millimeter wavelengths, one-third of the Class 0 + I sample is classified as Class 0, leading to durations of 0.13–0.26 Myr (Class 0) and 0.27–0.52 Myr (Class I). We revisit infrared color–color diagrams used in the literature to classify YSOs and propose minor revisions to classification boundaries in these diagrams. Finally, we show that the bolometric temperature is a poor discriminator between Class II and Class III YSOs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Matter power spectrum and the challenge of percent accuracy

Future galaxy surveys require one percent precision in the theoretical knowledge of the power spectrum over a large range including very nonlinear scales. While this level of accuracy is easily obtained in the linear regime with perturbation theory, it represents a serious challenge for small scales where numerical simulations are required. In this paper we quantify the precision of present-day N -body methods, identifying main potential error sources from the set-up of initial conditions to the measurement of the final power spectrum. We directly compare three widely used N -body codes, Ramses, Pkdgrav3, and Gadget3 which represent three main discretisation techniques: the particle-mesh method, the tree method, and a hybrid combination of the two. For standard run parameters, the codes agree to within one percent at k ≤1 h Mpc{sup −1} and to within three percent at k ≤10 h Mpc{sup −1}. We also consider the bispectrum and show that the reduced bispectra agree at the sub-percent level for k ≤ 2 h Mpc{sup −1}. In a second step, we quantify potential errors due to initial conditions, box size, and resolution using an extended suite of simulations performed with our fastest code Pkdgrav3. We demonstrate that the simulation box size should not be smaller than L =0.5 h {sup −1}Gpc to avoid systematic finite-volume effects (while much larger boxes are required to beat down the statistical sample variance). Furthermore, a maximum particle mass of M {sub p}=10{sup 9} h {sup −1}M{sub ⊙} is required to conservatively obtain one percent precision of the matter power spectrum. As a consequence, numerical simulations covering large survey volumes of upcoming missions such as DES, LSST, and Euclid will need more than a trillion particles to reproduce clustering properties at the targeted accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Machine Learning for the Zwicky Transient Facility

The Zwicky Transient Facility is a large optical survey in multiple filters producing hundreds of thousands of transient alerts per night. We describe here various machine learning (ML) implementations and plans to make the maximal use of the large data set by taking advantage of the temporal nature of the data, and further combining it with other data sets. We start with the initial steps of separating bogus candidates from real ones, separating stars and galaxies, and go on to the classification of real objects into various classes. Besides the usual methods (e.g., based on features extracted from light curves) we also describe early plans for alternate methods including the use of domain adaptation, and deep learning. In a similar fashion we describe efforts to detect fast moving asteroids. We also describe the use of the Zooniverse platform for helping with classifications through the creation of training samples, and active learning. Finally we mention the synergistic aspects of ZTF and LSST from the ML perspective.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2011

Heat load of a GaAs photocathode in an SRF electron gun

A great deal of effort has been made over the last decades to develop a better polarized electron source for high energy physics. Several laboratories operate DC guns with a gallium arsenide photocathode, which yield a highly polarized electron beam. However, the beam's emittance might well be improved by using a superconducting radio frequency (SRF) electron gun, which delivers beams of a higher brightness than that from DC guns because the field gradient at the cathode is higher. SRF guns with metal and CsTe cathodes have been tested successfully. To produce polarized electrons, a Gallium-Arsenide photo-cathode must be used: an experiment to do so in a superconducting RF gun is under way at BNL. Since a bulk gallium arsenide (GaAs) photocathode is normal conducting, a problem arises from the heat load stemming from the cathode. In this paper, we present our measurements of the electrical resistance of GaAs at cryogenic temperatures, a prediction of the heat load and verification by measuring the quality factor of the gun with and without the cathode at 2 K. We simulate heat generation and flow from the GaAs cathode using the ANSYS program. Finally, by following the findings with the heat load model, we designed and fabricated a new cathode holder (plug) to decrease the heat load from GaAs.

2 K test↗
DOE OSTI2020

Automated detector simulation and reconstruction parametrization using machine learning

Rapidly applying the effects of detector response to physics objects (e.g. electrons, muons, showers of particles) is essential in high energy physics. Presently available tools for the transformation from truth-level physics objects to reconstructed detector-level physics objects involve manually defining resolution functions. These resolution functions are typically derived in bins of variables that are correlated with the resolution (e.g. pseudorapidity and transverse momentum). This process is time consuming, requires manual updates when detector conditions change, and can miss important correlations. Machine learning offers a way to automate the process of building these truth-to-reconstructed object transformations and can capture complex correlation for any given set of input variables. Such machine learning algorithms, with sufficient optimization, could have a wide range of applications: improving phenomenological studies by using a better detector representation, allowing for more efficient production of Geant4 simulation by only simulating events within an interesting part of phase space, and studies on future experimental sensitivity to new physics.

47 OTHER INSTRUMENTATION↗