Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISTRIBUTION FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Electroweak gauge boson parton distribution functions

Transverse and longitudinal electroweak gauge boson parton distribution functions (PDFs) are calculated in terms of deep-inelastic scattering structure functions, following the recently developed method to determine the photon PDF. The calculation provides initial conditions at the electroweak scale for PDF evolution to higher energies. Numerical results for the W ± and Z transverse, longitudinal and polarized PDFs, as well as the γZ transverse and polarized PDFs are reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Local Structure of Zr(OH) 4 and the Effect of Calcination Temperature from X-ray Pair Distribution Function Analysis

Analysis of X-ray pair distribution function data has provided a detailed picture of the local structure of amorphous Zr(OH) 4 and its thermal decomposition into ZrO 2 . In the untreated phase, the Zr atoms tend to be coordinated by six or seven oxygen atoms. The Zr centered polyhedra connect to each other primarily by sharing edges, but also with a significant amount of corner sharing, to form two-dimensional sheets in which the Zr are connected to an average of about five other Zr. This local structure is related to the structure of monoclinic ZrO 2 and can be derived from it by removing certain Zr neighbors to form sheets and reduce the corner to edge sharing ratio. The maximum correlation length in Zr(OH) 4 is about 12 Å. Heating up to 125 °C results in significant water loss but does not alter the network of Zr and bridging O atoms. Additional water loss caused by heating to 250 °C triggers a reorganization into a new type of amorphous phase with a three-dimensional network and a greater number of Zr–Zr neighbors. Further heating to 330 °C causes crystallization into a mixture of tetragonal and monoclinic ZrO 2 , with the minor tetragonal phase having a smaller average domain size. Here, the tetragonal component vanishes by 900 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Plasticity Modeling and Experimental Validation with an Orientation Distribution Function for Ti-7Al Alloy

An orientation distribution function based model is used for micromechanical modeling of the titanium-aluminum alloys, Ti-0 wt % Al and Ti-7 wt % Al, which are in demand for many aerospace applications. This probability descriptor based modeling approach is different than crystal plasticity finite element techniques since it computes the averaged material properties using upper bound averaging. A rate-independent single-crystal plasticity model is implemented to compute the effect of macroscopic strain on the polycrystal. An optimization problem is defined for calibrating the basal, prismatic, pyramidal slip system and twin parameters using the available tension and compression experimental data. The crystal plasticity parameters of Ti-7 wt % Al are not studied extensively in literature, and therefore the optimization results for the crystal plasticity model realization produce unique data, which will be beneficial to future studies in the field. The sensitivities of the slip and twin parameters to the design objectives are also investigated to identify the most critical slip system parameters. Using the optimum design parameters, the microstructural textures, during the tension test, are predicted by the crystal plasticity finite element simulations, and compared to the available experimental texture and scanning electron microscope—digital image correlation data.

36 MATERIALS SCIENCE↗

Global QCD Analysis of Fragmentation and Parton Distribution Functions

A new Quantum Chromodynamics (QCD) analysis framework of fragmentation and parton distribution functions has been developed by the TTAP (Team Towards global Analysis of the Proton and partons) collaboration. The Mellin transformation technique used in the analysis framework improved the computing speed, which allows us to perform further detailed analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Random matrix theory of singular values of rectangular complex matrices I: Exact formula of one-body distribution function in fixed-trace ensemble

The fixed-trace ensemble of random complex matrices is the fundamental model that excellently describes the entanglement in the quantum states realized in a coupled system by its strongly chaotic dynamical evolution [see H. Kubotani, S. Adachi, M. Toda, Phys. Rev. Lett. 100 (2008) 240501]. The fixed-trace ensemble fully takes into account the conservation of probability for quantum states. The present paper derives for the first time the exact analytical formula of the one-body distribution function of singular values of random complex matrices in the fixed-trace ensemble. The distribution function of singular values (i.e. Schmidt eigenvalues) of a quantum state is so important since it describes characteristics of the entanglement in the state. The derivation of the exact analytical formula utilizes two recent achievements in mathematics, which appeared in 1990s. The first is the Kaneko theory that extends the famous Selberg integral by inserting a hypergeometric type weight factor into the integrand to obtain an analytical formula for the extended integral. The second is the Petkovsek-Wilf-Zeilberger theory that calculates definite hypergeometric sums in a closed form.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Local structural behavior of PbZr 0.5 Ti 0.5 O 3 during electric field application via in situ pair distribution function study

Here, the local structural behavior of PbZr 0.5 Ti 0.5 O3 (PZT 50/50) ceramics during application of an electric field was investigated using pair distribution function (PDF) analysis. In situ synchrotron total scattering was conducted, and the PDFs were calculated from the Fourier transform of the total scattering data. The PDF refinement of the zero-field data suggests a local-structure model with [001] Ti-displacement and negligible Zr-displacement. The directional PDFs at different field amplitudes indicate the bond-length distribution of the nearest Pb-B (B = Zr/Ti) pair changes significantly with the field. The radial distribution functions (RDFs) of a model for polarization rotation were calculated. The calculated and the experimental RDFs are consistent. This result suggests the changes in Pb-B bond-length distribution could be dominantly caused by polarization rotation. Peak fitting of the experimental RDFs was also conducted. The peak position trends with increasing field are mostly in agreement with the calculation result of the polarization rotation model. The area ratio of the peaks in the experimental RDFs also changed with field amplitude, indicating that Zr atoms have a detectable displacement driven by the electric field. Our study provides an experimental observation of the behaviors of PZT 50/50 under field at a local scale which supports the polarization rotation mechanism.

36 MATERIALS SCIENCE↗

Reconstructing parton distribution functions from Ioffe time data: from Bayesian methods to neural networks

The computation of the parton distribution functions (PDF) or distribution amplitudes (DA) of hadrons from first principles lattice QCD constitutes a central open problem in high energy nuclear physics. In this study, we present and evaluate the efficiency of several numerical methods, well established in the study of inverse problems, to reconstruct the full x-dependence of PDFs. Our starting point are the so called Ioffe time PDFs, which are accessible from Euclidean time simulations in conjunction with a matching procedure. Using realistic mock data tests, we find that the ill-posed incomplete Fourier transform underlying the reconstruction requires careful regularization, for which both the Bayesian approach as well as neural networks are efficient and flexible choices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

THE STELLAR METALLICITY DISTRIBUTION FUNCTION OF THE GALACTIC HALO FROM SDSS PHOTOMETRY

We explore the stellar metallicity distribution function of the Galactic halo based on SDSS ugriz photometry. A set of stellar isochrones is calibrated using observations of several star clusters and validated by comparisons with medium-resolution spectroscopic values over a wide range of metal abundance. We estimate distances and metallicities for individual main-sequence stars in the multiply scanned SDSS Stripe 82, at heliocentric distances in the range 5-8 kpc and |b| > 35 Degree-Sign , and find that the in situ photometric metallicity distribution has a shape that matches that of the kinematically selected local halo stars from Ryan and Norris. We also examine independent kinematic information from proper-motion measurements for high Galactic latitude stars in our sample. We find that stars with retrograde rotation in the rest frame of the Galaxy are generally more metal poor than those exhibiting prograde rotation, which is consistent with earlier arguments by Carollo et al. that the halo system comprises at least two spatially overlapping components with differing metallicity, kinematics, and spatial distributions. The observed photometric metallicity distribution and that of Ryan and Norris can be described by a simple chemical evolution model by Hartwick (or by a single Gaussian distribution); however, the suggestive metallicity-kinematic correlation contradicts the basic assumption in this model that the Milky Way halo consists primarily of a single stellar population. When the observed metallicity distribution is deconvolved using two Gaussian components with peaks at [Fe/H] Almost-Equal-To -1.7 and -2.3, the metal-poor component accounts for {approx}20%-35% of the entire halo population in this distance range.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of the accuracy of modeling the orientation distribution function of polycrystalline materials from individual orientations

The accuracy of reconstructing the orientation distribution function of grains in polycrystalline materials by the kernel method from a set of individual orientations has been studied. In particular, the influence of choosing the smoothing kernel in the kernel method and the influence of the dependence on the resulting distribution are taken into account. The rotations obeying the normal distribution on the group SO(3) and obtained by the statistical test method are used as an orientation set. Some aspects of electron backscattering diffraction measurements are considered. This problem is urgent in view of the expanding potential of the experimental study of the texture of polycrystalline materials, especially for electron microscopy, which makes it possible to measure the orientations of individual grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tomography of the rho meson in the QCD instanton vacuum: Transverse momentum dependent parton distribution functions

We analyze the rho meson unpolarized and polarized transverse momentum dependent parton distribution functions (TMDPDFs) in the instanton liquid model (ILM). The corresponding TMDs in ILM are approximated by a constituent quark beam function in the leading Fock state multiplied by a rapidity-dependent factor resulting from the staple-shaped Wilson lines, for fixed longitudinal momentum, transverse separation, and rapidity. At the resolution of the ILM, all of the rho meson TMDs are symmetric in parton 𝑥 for fixed transverse momentum, and Gaussian-like in the transverse momentum for fixed parton 𝑥. The latter is a direct consequence of the profiling of the quark zero modes in the ILM. The evolved TMDs at higher rapidity using the Collins-Soper kernel, and higher resolution using the renormalization group, show substantial skewness towards low parton 𝑥.

Gluons↗

Structural Study of Biotic and Abiotic Poorly-crystalline Manganese Oxides Using Atomic Pair Distribution Function Analysis

Manganese (Mn) oxides are among the most reactive natural minerals and play an important role in elemental cycling in oceanic and terrestrial environments. A large portion of naturally-occurring Mn oxides tend to be poorly-crystalline and/or nanocrystalline, with not fully resolved crystal structures. In this study, the crystal structures of their synthetic analogs including acid birnessite (AcidBir), {delta}-MnO{sub 2}, polymeric MnO{sub 2} (PolyMnO{sub 2}) and a bacteriogenic Mn oxide (BioMnO{sub x}), have been revealed using atomic pair distribution function (PDF) analysis. Results unambiguously verify that these Mn oxides are layered materials. The best models that accurately allow simulation of pair distribution functions (PDFs) belong to the monoclinic C12/m1 space group with a disk-like shape. The single MnO{sub 6} layers in the average structures deviate significantly from hexagonal symmetry, in contrast to the results of previous studies based on X-ray diffraction analysis in reciprocal space. Manganese occupancies in MnO{sub 6} layers are estimated to be 0.936, 0.847, 0.930 and 0.935, for AcidBir, BioMnO{sub x}, {delta}-MnO{sub 2} and PolyMnO{sub 2}, respectively; however, occupancies of interlayer cations and water molecules cannot be accurately determined using the models in this study. The coherent scattering domains (CSDs) of PolyMnO{sub 2}, {delta}-MnO{sub 2} and BioMnO{sub x} are at the nanometer scale, comprising one to three MnO{sub 6} layers stacked with a high disorder in the crystallographic c-axis direction. Overall, the results of this study advance our understanding of the mineralogy of Mn oxide minerals in the environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The impact of target mass correction on polarized parton distribution functions

Considering the nonzero mass effect of the target in extracting polarized parton distribution functions (PPDFs) in preasymptotic region is not negligible. We extract PPDFs from available proton structure function data and study the numerical effects of target mass corrections (TMCs). PPDFs with and without this correction are compared.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Lattice QCD Benchmark of Proton Helicity and Flavor-Dependent Unpolarized Transverse Momentum-Dependent Parton Distribution Functions at Physical Quark Masses

We present the first lattice QCD calculations of the isovector helicity transverse momentum-dependent parton distribution function (TMDPDF) and the flavor-dependent unpolarized TMDPDFs for up and down quarks in the proton. Our computations utilize domain-wall fermion discretization with physical quark masses. Employing Coulomb-gauge-fixed quark correlation functions within the large-momentum effective theory framework, we access nonperturbative transverse quark separations 𝑏 𝑇 up to approximately 1 fm, corresponding to transverse momenta as low as 200 MeV. Based on the quasi-TMD factorization theorem, we construct renormalization-group–invariant ratios that are equal to the corresponding light-cone TMDPDF ratios. At moderate 𝑥, our results reveal that the isovector helicity and unpolarized TMDPDFs exhibit nearly identical transverse structure up to a normalization factor, and the unpolarized distributions display only mild flavor dependence. These findings not only support key trends observed in recent global analyses but also provide robust, nonperturbative constraints that can distinguish between different parameterizations. This Letter establishes a first-principles benchmark for TMDPDFs, offering valuable input for ongoing and future experimental efforts to map the proton’s three-dimensional structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ion distribution functions in the vicinity of Comet Giacobini-Zinner

Photoionization of neutral molecules in the coma surrounding a comet produces heavy ions which contaminate and mass-load the solar wind. Cometary ion distribution functions in the vicinity of Comet Giacobini-Zinner (GZ) are calculated using a Monte Carlo method. The distribution function calculated behind the shock has both cold (approximately 2 keV) and hot (approximately 40 keV) components.

Cravens, T. E.↗

Development of a compact thermal lithium atom beam source for measurements of electron velocity distribution function anisotropy in electron cyclotron resonance plasmas

The anisotropy of the electron velocity distribution function (EVDF) in plasmas can be deduced from the polarization of emissions induced by anisotropic electron-impact excitation. In this paper, we develop a compact thermal lithium atom beam source for spatially resolved measurements of the EVDF anisotropy in electron cyclotron resonance (ECR) plasmas. The beam system is designed such that the ejected beam has a slab shape, and the beam direction is variable. The divergence and flux of the beam are evaluated by experiments and calculations. The developed beam system is installed in an ECR plasma device with a cusp magnetic field, and the LiI 2s–2p emission (670.8 nm) is observed in low-pressure helium plasma. The two-dimensional distributions of the degree and direction of the polarization in the LiI emission are measured by a polarization imaging system. The evaluated polarization distribution suggests the spatial variation of the EVDF anisotropy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Pion and kaon parton distribution functions from basis light front quantization and QCD evolution

We investigate the parton distribution functions (PDFs) of the pion and the kaon by combining quantum chromodynamics (QCD) evolution with the basis light front quantization. The initial PDFs result from the light front wave functions obtained by diagonalizing the effective Hamiltonian consisting of the holographic QCD confinement potential, a complementary longitudinal confinement potential, and the color-singlet Nambu–Jona-Lasinio interactions. The valence-quark PDF of the pion, after QCD evolution, is consistent with the result from the E-0615 experiment at Fermilab. Meanwhile, the pion structure function calculated from the PDFs agrees with the ZEUS and the H1 experiments at DESY-HERA for large x. Additionally, the ratio of the up quark PDF of the kaon to that of the pion is in agreement with the NA-003 experiment at CERN. Finally, we also present the cross section for the pion-nucleus induced Drell-Yan process with the obtained pion PDFs supplemented by the PDFs of the target nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗