Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Equation of state at ultrahigh densities. II

Theoretical research into the behavior of matter in the high-density region (at least 2 by 10 to the 14th power g/cu cm) is reviewed. Results of work concerning the appearance of hyperons in the neutron fluid at densities higher than nuclear density are summarized, and it is shown that the presence of hyperons does not severely alter the equation of state from that for a pure neutron gas provided that hyperonic potentials are almost identical to the nucleon-nucleon case. Computations to determine whether neutrons can solidify at a high enough density are described. It is shown that the solidification density is well within the range of values expected in the interior of neutron stars. Several unrelated attempts to analyze the behavior of matter in the relativistic or superhigh-density region (in excess of 10 to the 16th power gm/cu cm) are summarized. It is noted that available data on neutron stars are insufficient to determine a specific value for the speed of sound at superhigh densities.

Camuto, V.↗
DOE OSTI2020

Combined spectroscopic imaging STM and ARPES study of different gaps measured in the cuprate phase diagram

A comparative study of the gaps measured in two techniques, angle-resolved photoelectron spectroscopy and spectroscopic imaging scanning tunneling microscopy, is presented herein. In particular the study focuses on the more overdoped region of the cuprate phase diagram in the superconducting state. While the total densities of states measured in the two techniques agree very well, it is shown that the peak in the density of states, Δ DOS , is consistently displaced to higher energies relative to the maximal superconducting gap, Δ 0 , determined in photoemission. The difference between the two gaps is more evident for the less doped samples reflecting increased normalization of bands. This observation will clearly influence the boundaries in the phase diagrams of the cuprates defined by these two techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Re-evaluation of the TSL for Yttrium Hydride

Yttrium hydride (YH x ) is of interest as a high-temperature moderator material in advanced nuclear reactor systems because of its superior ability to retain hydrogen at elevated temperatures. Thermal neutron scattering laws (TSL) for hydrogen bound in yttrium hydride (H-YH 2 ) and yttrium bound in yttrium hydride (Y-YH 2 ) were previously evaluated by Naval Nuclear Laboratory using the ab initio approach and released in ENDF/B-VIII.0. In that work, density functional theory, incorporating the generalized gradient approximation (GGA) for the exchange-correlation energy, was used to simulate the face-centered cubic structure of YH 2 and calculate the interatomic Hellmann-Feynman forces for a 2×2×2 supercell containing 96 atoms. Lattice dynamics calculations using PHONON were used to determine the phonon density of states. The calculated phonon density of states for H and Y in YH 2 were then used to prepare H-YH 2 and Y-YH 2 TSL evaluations, in the incoherent approximation, using the LEAPR module of NJOY. In addition, elastic scattering was assumed to be incoherent for both H and Y. While the incoherent elastic scattering approximation is appropriate for H-YH 2 , it introduces an undesirable approximation for Y-YH 2 . In this work, we re-evaluate the TSL for Y-YH 2 using FLASSH (Full Law Analysis Scattering System Hub). Y-YH 2 is evaluated using the FLASSH generalized coherent elastic scattering capability in order to capture the Bragg peaks associated with the YH 2 crystal structure which were neglected in the prior NJOY-based evaluation due to limitations in LEAPR. An experimental approach to validate the Y-YH 2 TSL using neutron transmission measurements is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

MAX-Phase Partial Optical Properties

The optical and electrical properties of MAX-phase materials have been thoroughly studied in the past. We present here a new technique to determine and study the partial contributions to the optical properties. Following the same methodology as the decomposition of the density of states to the partial density of states, we have decomposed the optical properties into the partial optical properties. Using this technique the differences of elemental and layer resolved optical properties are displayed for both the 211 and 312 phase of TiSiC and TiAlC MAX-phase materials.

Weigand, Alysse↗
DOE OSTI2022

Correlation energy of the uniform electron gas determined by ground-state conditional probability density functional theory

Conditional-probability density functional theory (CP-DFT) is a formally exact method for finding correlation energies from Kohn-Sham DFT without evaluating an explicit energy functional. We present details on how to generate accurate exchange-correlation energies for the ground-state uniform gas. We also use the exchange hole in a CP antiparallel spin calculation to extract the high-density limit. We give a highly accurate analytic solution to the Thomas-Fermi model for this problem, showing its performance relative to Kohn-Sham and may be useful at high temperatures. We explore several approximations to the CP potential. Furthermore, results are compared to accurate parameterizations for both exchange-correlation energies and holes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Capturing multireference excited states by constrained-density-functional theory

The computation of excited electronic states with commonly employed (approximate) methods is challenging, typically yielding states of lower quality than the corresponding ground state for a higher computational cost. In this work, we present a mean-field method that extends the previously proposed excited constrained-density-functional theory (XCDFT) from single Slater determinants to ensemble one-body reduced density matrices for computing low-lying excited states. The method still retains an associated computational complexity comparable to a semilocal density functional theory (DFT) calculation while at the same time it is capable of approaching states with multireference character. Further, we benchmark the quality of this method on well-established test sets, finding good descriptions of the electronic structure of multireference states and maintaining an overall accuracy for the predicted excitation energies comparable to semilocal time-dependent DFT.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Crack‐Free Single‐Crystalline LiNiO 2 for High Energy Density All‐Solid‐State Batteries

Abstract Single‐crystalline layered oxide (LiNi 1‐ x ‐ y Mn x Co y O 2 ) cathodes have been found to exhibit exceptional electrochemical properties when coupled with various inorganic solid electrolytes (ISEs) in all‐solid‐state batteries (ASSBs). Their advantages stem from the robust morphological integrity with the absence of grain boundaries and the high electrochemical oxidative stability. Here, ASSBs featuring single‐crystalline LiNiO 2 (LNO) with the highest Ni content are reported, offering a high theoretical specific capacity of 275 mAh g ‐1 alongside a high average discharge voltage (3.7 V vs Li + /Li). Through a careful investigation, it is demonstrated that micron‐sized single‐crystalline LNO (µSC‐LNO) composite cathodes with a halide ISE exhibit a high initial discharge capacity of 205 mAh g ‐1 with an outstanding cycle performance over 200 cycles in room‐temperature ASSBs. The significance of engineering parameters is emphasized, such as particle size and specific density, in promoting a homogeneous and fast Li + transport within the composite cathodes. Furthermore, the formation of undesirable interphase between the halide ISE in the cathode and sulfide ISE separator is elucidated, which may be a critical factor impeding long‐term cyclability of ASSBs. This work provides insights into the design of composite cathodes for high‐energy‐density ASSBs.

Chemistry↗
DOE OSTI2021

Collective states and charge density waves in the group IV transition metal trichalcogenides

It has been nearly a century since the original mechanism for charge density wave (CDW) formation was suggested by Peierls. Since then, the term has come to describe several related concepts in condensed matter physics, having their origin in either the electron–phonon or electron–electron interaction. The vast majority of CDW literature deals with systems that are metallic, where discussions of mechanisms related to the Fermi surface are valid. Recently, it has been suggested that semiconducting systems such as TiS 3 and TiSe 2 exhibit behavior related to CDWs. In such cases, the origin of the behavior is more subtle and intimately tied to electron–electron interactions. We introduce the different classifications of CDW systems that have been proposed and discuss work on the group IV transition metal trichalcogenides (TMTs) (ZrTe 3 , HfTe 3 , TiTe 3 , and TiS 3 ), which are an exciting and emergent material system whose members exhibit quasi-one-dimensional properties. TMTs are van der Waals materials and can be readily studied in the few-layer limit, opening new avenues to manipulating collective states. We emphasize the semiconducting compound TiS 3 and suggest how it can be classified based on available data. Although we can conjecture on the origin of the CDW in TiS 3 , further measurements are required to properly characterize it.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Finite density QCD equation of state: Critical point and lattice-based 𝑇′ expansion

Here, we present a novel construction of the QCD equation of state (EoS) at finite baryon density. Our work combines a recently proposed resummation scheme for lattice QCD results with the universal critical behavior at the QCD critical point. This allows us to obtain a family of equations of state in the range 0 ≤ 𝜇 𝐵 ≤ 700 MeV and 25 MeV ≤ 𝑇 ≤ 800 MeV, which match lattice QCD results near 𝜇 𝐵 =0 while featuring a critical point in the 3D Ising model universality class. The position of the critical point can be chosen within the range accessible to beam-energy scan heavy-ion collision experiments. The strength of the singularity and the shape of the critical region are parametrized using a standard parameter set. We impose stability and causality constraints and discuss the available ranges of critical point parameter choices, finding that they extend beyond earlier parametric QCD EoS proposals. We present thermodynamic observables, including baryon density, pressure, entropy density, energy density, baryon susceptibility and speed of sound, that cover a wide range in the QCD phase diagram relevant for experimental exploration.

Astronomy & Astrophysics↗
DOE OSTI2025

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Biomass-Derived Carbon and Their Composites for Supercapacitor Applications: Sources, Functions, and Mechanisms

Biomass-derived carbons are eco-friendly and sustainable materials, making them ideal for supercapacitors due to their high surface area, excellent conductivity, cost-effectiveness, and environmental benefits. This review provides valuable insights into biomass-derived carbon and modified carbon for supercapacitors, integrating both experimental results and theoretical calculations. This review begins by discussing the origins of biomass-derived carbon in supercapacitors, including plant-based, food waste-derived, animal-origin, and microorganism-generated sources. Then, this review presents strategies to improve the performance of biomass-derived carbon in supercapacitors, including heteroatom doping, surface functionalization, and hybrid composite construction. Furthermore, this review analyzes the functions of biomass-derived carbon in supercapacitors both in its pure form and as modified materials. The review also explores composites derived from biomass-based carbon, including carbon/MXenes, carbon/MOFs, carbon/graphene, carbon/conductive polymers, carbon/transition metal oxides, and carbon/hydroxides, providing a thorough investigation. Most importantly, this review offers an innovative summary and analysis of the role of biomass-derived carbon in supercapacitors through theoretical calculations, concentrating on four key aspects: energy band structure, density of states, electron cloud density, and adsorption energy. Finally, the review concludes the future research directions for biomass carbon-based supercapacitors, including the discovery of novel biomass materials, tailoring surface functional groups, fabricating high-performance composite materials, exploring ion transfer mechanisms, and enhancing practical applications. In summary, this review offers a thorough exploration of the sources, functions, and mechanisms of biomass-derived carbon in supercapacitors, providing valuable insights for future research.

biomass-derived carbon↗
NASA NTRSDate not supplied

Computationally Guided Development of Components for High Energy Density Solid-State Lithium-Sulfur Batteries

All electric vertical take-off and landing vehicles (eVTOL) for urban air mobility (UAM) concepts face numerous challenging technical barriers before their introduction into the consumer marketplace. The most challenging of these technical barriers to overcome is developing an energy storage system capable of meeting the rigorous aerospace safety and performance criteria1. The performance metrics for eVTOL craft, such as specific energy, specific power, and safety, exceed those of electric automobiles by a factor of two to four. Current state-of-the-art (SOA) lithium-ion batteries are incapable of meeting the key performance criteria of energy and safety for eVTOL. Therefore, next generation advanced chemistries and designs must be developed to meet required performance metrics for electric aviation2. Beyond lithium-ion chemistries, such as lithium-sulfur, show promise in their high energy, while limitations exist in their power and cyclability due to low electrical conductivity and high intermediate solubility in organic liquid electrolytes. Several strategies to overcome the low electrical conductivity involve the use of selenium as a dopant in the active sulfur material, along with the incorporation of 2-dimensional electron-conducting holey-graphene to improve the composite cathodes electronic conductivity. Furthermore, combining this chemistry with a solid-electrolyte avoids the components’ dissolution issues3. However, the development of composite solid-state cathodes is non-trivial as several components must be intimately mixed so that the active component has sufficient access to both electrons and lithium ions to undergo full electrochemical conversion. Mathematical modeling of battery components can assist experimental design through a robust and rigorous combination of computational modeling techniques covering multiple length scales. The objective is to leverage modern computational materials methods combined with battery multiphysics tools to develop radically advanced compatible cathode and electrolyte materials, build and test solid state lithium-sulfur cells and packs. A NASA-based cross-organizational team of high-powered experts combined integrated computational predictive modeling, fundamental chemistry analysis, advanced material science, and battery cell development to tackle this very challenging, multidisciplinary problem. This presentation will show a multiscale computational modeling approach that has produced a novel particle dynamics method called Solid Electrolyte Sphere Approximation Model (SESAM). SESAM modeling targets the 1-10 µm scale structures and provides electromechanical and grain interactions for predictive design guidelines for the manufacturing of solid-state components. Parameters such as particle size and volume fraction of the constituent materials were modeled and experimentally fabricated to optimize electrochemical performance through improved microstructure design. Experimental feedback was provided through ionic and electronic conductivity assessment and structural analysis of developed materials and cell components.

battery↗
NASA NTRS1978

Steady-state vortex-line density in turbulent He II counterflow

We have measured the steady-state vortex-line density in turbulent counterflow using a second-sound-burst technique as a local probe. Contrary to the Vinen theory and previous assumptions, we find substantial line-density inhomogeneity and strong departures from the predicted heat-current dependence. Anomalous behavior of the line density at higher heat currents provides evidence for a new secondary flow state.

Ostermeier, R. M.↗
DOE OSTI2021

Quantifying a partial polyamorphic transition in a cerium-based metallic glass during cooling

Cerium-based metallic glasses are prototype polyamorphous systems with pressure-induced polyamorphic transitions extensively reported. Cooling typically has a similar effect on materials as compression with regard to reducing volume. However, previous studies show dramatically different behavior of Ce-based metallic glasses between cooling and compression, whose origin remains unclear. Here, using in situ low-temperature synchrotron high-energy x-ray diffraction, the structural evolution of a Ce68Al10Cu20Co2 metallic glass is accurately determined and analyzed by a structure factor and a reduced pair distribution function (PDF) during cooling from 298 to 83 K. An unusually large linear thermal expansion coefficient is revealed, which is associated with both continuous but inconsistent structural changes between the two subpeaks of the first atomic shell in terms of average bond lengths and coordination numbers. These phenomena are suggested to be attributed to a gradual 4f electron delocalization of only a minimal amount (∼2.6% at 83 K) of Ce atoms by quantitative analysis of the PDF data. However, a previously expected global polymorphic transition from a low-density amorphous state to a high-density amorphous state with an abrupt volume collapse is not observed. Moreover, electrical resistivity also shows a continuous increase during cooling without any sharp change. It is clarified that cryogenic temperatures could facilitate but are not powerful enough alone to trigger a global polymorphic transition in the Ce68Al10Cu20Co2 metallic glass, suggesting a wide distribution of its local atomic environment.

Chen, Zhi↗
DOE OSTI2025

Quasiparticle Interference in Kitaev Quantum Spin Liquids

We study quasiparticle interference (QPI) in the Kitaev quantum spin liquid (QSL) for electrons tunneling into the QSL. The local tunneling conductance around a spin vacancy or localized vison reveals unique features associated with fractionalized Majorana fermions, chargons, and visons. In certain parameter regimes, the single-spinon density of states and momentum dispersion can both be directly extracted from the tunneling conductance. In conclusion, our results suggest that QPI is a promising tool for identifying the Kitaev QSL and its fractionalized excitations.

Anyons↗
NASA NTRS2010

Bonding and Microstructural Stability in Ni55Ti45 Studied by Experimental and Theoretical Methods

Spiral orbit tribometry friction tests performed on Ni-rich Ni55Ti45 titanium ball bearings indicate that this alloy is a promising candidate for future aerospace bearing applications. Microstructural characterization of the bearing specimens was performed using transmission electron microscopy and energy dispersive spectroscopy, with NiTi, Ni4Ti3, Ni3Ti, and Ni2Ti4Ox phases identified within the microstructure of the alloy. Density functional theory was applied to predict the electronic structure of the NixTiy phases, including the band structure and site projected density of states. Ultraviolet photoemission spectroscopy was used to verify the density of states results from the density functional theory calculations, with good agreement observed between experiment and theory.

Stott, Amanda C.↗