Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Crop Models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Combined Land Use of Solar Infrastructure and Agriculture for Socioeconomic and Environmental Co-Benefits in the Tropics

Solar photovoltaics (PV) are on the rise even in areas of low solar insolation. However, in developing countries with limited capital, land scarcity, or with geographically isolated agrarian communities, large solar infrastructures are often impractical. In these cases, implementation of low-density PV over existing crops may be required to integrate renewable energy services into rural communities. Here, using Indonesia as a model system, we investigated the land use, energy, greenhouse gas emissions, economic feasibility, and the environmental co-benefits associated with off-grid solar PV when combined with high value crop cultivation. The life cycle analyses indicate that small-scale dual land-use systems are economically viable in certain configurations and have the potential to provide several co-benefits including rural electrification, retrofitting diesel electricity generation, and electricity for processing agricultural products locally. A hypothetical full-density off-grid solar PV for a model village in Indonesia shows that electricity output (1907.5 GJ yr-1) is much higher than the total residential consumption (678 GJ yr-1), highlighting the opportunity to downscale the PV infrastructure by half to lower capital cost, to co-locate crops, and to support secondary income generating activities. Economic analysis shows that the 30-year net present cost of electricity from the half-density co-located PV system (12,257 million IDR) is significantly lower than that of the flat cost of diesel required to generate equivalent electricity (14,702 million IDR). Our analysis provides insights for smarter energy planning by optimizing the efficiency of land use and limiting conversion of agricultural and forested areas for energy production.

agrivoltaics↗

Ozone pollution reduction partially offsets the negative impact of climate change mitigation efforts on global hunger

Studies warning of the potential negative effects of climate mitigation on food security through the competing use of land for bioenergy and afforestation have overlooked the impact of reduced ozone and its potential enhancement of crop yields. Here we use six global agro-economic models to compare the impacts of climate change with climate mitigation policy and ozone reduction on agriculture. We find that ozone reduction could reduce the negative impact of a 1.5 °C-consistent climate change mitigation policy on global hunger by 15% in 2050. Sub-Saharan Africa and India, where hunger is most severe, account for 56% of this global reduction. Our findings indicate that the negative effects of climate mitigation on global hunger could be partially offset by the ozone reduction impact.

54 ENVIRONMENTAL SCIENCES↗

Image-Based Methods to Score Fungal Pathogen Symptom Progression and Severity in Excised Arabidopsis Leaves

Image-based symptom scoring of plant diseases is a powerful tool for associating disease resistance with plant genotypes. Advancements in technology have enabled new imaging and image processing strategies for statistical analysis of time-course experiments. There are several tools available for analyzing symptoms on leaves and fruits of crop plants, but only a few are available for the model plant Arabidopsis thaliana (Arabidopsis). Arabidopsis and the model fungus Botrytis cinerea (Botrytis) comprise a potent model pathosystem for the identification of signaling pathways conferring immunity against this broad host-range necrotrophic fungus. Here, we present two strategies to assess severity and symptom progression of Botrytis infection over time in Arabidopsis leaves. Thus, a pixel classification strategy using color hue values from red-green-blue (RGB) images and a random forest algorithm was used to establish necrotic, chlorotic, and healthy leaf areas. Secondly, using chlorophyll fluorescence (ChlFl) imaging, the maximum quantum yield of photosystem II (Fv/Fm) was determined to define diseased areas and their proportion per total leaf area. Both RGB and ChlFl imaging strategies were employed to track disease progression over time. This has provided a robust and sensitive method for detecting sensitive or resistant genetic backgrounds. A full methodological workflow, from plant culture to data analysis, is described.

59 BASIC BIOLOGICAL SCIENCES↗

Data and Code for: Observation-constrained agroecosystem model inversion reveals continental-scale variation of winter wheat traits

This repository contains the simulation outputs and processing scripts associated with the study of winter wheat traits across the United States, utilizing the Ecosys agroecosystem model. The dataset includes model results for both rainfed and irrigated winter wheat systems, supporting the findings presented in the manuscript titled "Observation-constrained agroecosystem model inversion reveals continental-scale variation of winter wheat traits." Data includes the original Ecosys simulation outputs (archived in .db format within the compressed .zip files) and extracted analysis data (stored in .pkl files for efficient processing). Python code for data processing and figure generation is provided in a Jupyter notebook. External Observational Datasets should refer to the following official repositories for the input and validation data used in this study. The eddy covariance data from the AmeriFlux network (https://ameriflux.lbl.gov/). Climate-forcing data of NLDAS-2 from NASA LDAS (https://ldas.gsfc.nasa.gov/nldas/nldas-2-forcing-data). Soil data from the Gridded Soil Survey Geographic Database (gSSURGO), available at (https://www.nrcs.usda.gov/resources/data-and-reports/gridded-soil-survey-geographic-gssurgo-database). Crop yields, planting and harvest dates from the USDA public databases (https://quickstats.nass.usda.gov/; https://webapp.rma.usda.gov/apps/actuarialinformationbrowser/CropCriteria.aspx). Satellite-derived SLOPE GPP data from ORNL DAAC (https://daac.ornl.gov/cgi-bin/dsviewer.pl?ds_id=1786). Land use and crop progress information from the USDA Crop Data Layer and Crop Progress and Condition Gridded Layers (https://www.nass.usda.gov/Research_and_Science/). The Ecosys model code is available online at https://github.com/jinyun1tang/ECOSYS.

Wheat↗

Land-use harmonization datasets for annual global carbon budgets

Abstract. Land-use change has been the dominant source of anthropogenic carbon emissions for most of the historical period and is currently one of the largest and most uncertain components of the global carbon cycle. Advancing the scientific understanding on this topic requires that the best data be used as input to state-of-the-art models in well-organized scientific assessments. The Land-Use Harmonization 2 dataset (LUH2), previously developed and used as input for simulations of the 6th Coupled Model Intercomparison Project (CMIP6), has been updated annually to provide required input to land models in the annual Global Carbon Budget (GCB) assessments. Here we discuss the methodology for producing these annual LUH2-GCB updates and extensions which incorporate annual wood harvest data updates from the Food and Agriculture Organization (FAO) of the United Nations for dataset years after 2015 and the History Database of the Global Environment (HYDE) gridded cropland and grazing area data updates (based on annual FAO cropland and grazing area data updates) for dataset years after 2012, along with extrapolations to the current year due to a lag of 1 or more years in the FAO data releases. The resulting updated LUH2-GCB datasets have provided global, annual gridded land-use and land-use-change data relating to agricultural expansion, deforestation, wood harvesting, shifting cultivation, regrowth and afforestation, crop rotations, and pasture management and are used by both bookkeeping models and dynamic global vegetation models (DGVMs) for the GCB. For GCB 2019, a more significant update to LUH2 was produced, LUH2-GCB2019 (https://doi.org/10.3334/ORNLDAAC/1851, Chini et al., 2020b), to take advantage of new data inputs that corrected cropland and grazing areas in the globally important region of Brazil as far back as 1950. From 1951 to 2012 the LUH2-GCB2019 dataset begins to diverge from the version of LUH2 used for the World Climate Research Programme's CMIP6, with peak differences in Brazil in the year 2000 for grazing land (difference of 100 000 km2) and in the year 2009 for cropland (difference of 77 000 km2), along with significant sub-national reorganization of agricultural land-use patterns within Brazil. The LUH2-GCB2019 dataset provides the base for future LUH2-GCB updates, including the recent LUH2-GCB2020 dataset, and presents a starting point for operationalizing the creation of these datasets to reduce time lags due to the multiple input dataset and model latencies.

Chini, Louise (ORCID:0000000290703505)↗

Improving evapotranspiration computation with electrical resistivity tomography in a maize field

Abstract Hydrogeophysical methods have been increasingly used to study subsurface soil–water dynamics, yet their application beyond the soil compartment or the quantitative link to soil hydraulic properties remains limited. To examine how these methods can inform model‐based evapotranspiration (ET) calculation under varying soil water conditions, we conducted a pilot‐scale field study at an experimental maize plot with manipulated irrigation treatments. Our goal was to develop a workflow for (1) acquiring and inverting field electrical resistivity tomography (ERT) data, (2) correlating ERT to soil hydraulic properties, (3) spatially characterizing soil water stress that feeds into ET modeling (the FAO‐56 model), and (4) evaluating the performance of ERT‐based ET computation. Our results showed that ERT was able to capture decimeter‐scale soil water content (SWC) dynamics from root water uptake and irrigation manipulation and the contrast of soil water stress between deficiently and fully irrigated maize. We also demonstrated the flexibility of using ERT to spatially integrate soil water stress in the soil volume of interest, which could be adjusted based on different crops and plot layouts. The integration of the ERT datasets into ET modeling provided insights into the spatial heterogeneity of the subsurface that has been challenging for point‐based sensing, which can further our understanding of the hydraulic dynamics in the soil‐plant‐atmosphere continuum.

54 ENVIRONMENTAL SCIENCES↗

Changes in global land use and CO 2 emissions from us bioethanol production: what drives differences in estimates between corn and cellulosic ethanol?

Land use change (LUC) CO 2 emissions associated with bioenergy production depend on the amount of land required to produce bioenergy crops, the carbon stored in such crops (including in the leaves, stalk, roots and soil), and the carbon emitted when another land cover is directly or indirectly displaced as a result. In this study, we use a global integrated assessment model [the Global Change Analysis Model (GCAM)] to explore the differences in estimates of LUC CO 2 emissions for two crops (corn and switchgrass) used to produce ethanol in the United States under alternative assumptions about natural lands protection. Varying the latter assumptions for corn ethanol results in net LUC CO 2 emissions between 7 and 41 gCO 2 per MJ of ethanol, whereas varying the same assumptions for switchgrass ethanol results in net emissions between -26 and 14 gCO 2 per MJ of ethanol. The low-end estimate for each occurs when natural lands are assumed to be fully protected everywhere, which leads to significant cropland intensification. The high-end estimate for each occurs when natural lands are assumed to be unprotected everywhere, leading to greater cropland expansion and associated conversion of unmanaged forest and pasture. Results from this study could be used to inform scenarios of future energy system change or life cycle assessment of biofuels for which LUC emissions would be an input.

54 ENVIRONMENTAL SCIENCES↗

A multi-criteria land suitability assessment of field allocation decisions for switchgrass

With the goal of evaluating biomass resource availability in certain regions in the United States, the Department of Energy, Department of Agriculture, Environmental Protection Agency, national laboratories, and Forest Service research laboratories, together with academic and industry collaborators, performed a resource analysis study, 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 1: Economic Availability of Feedstocks, using POLYSYS model to estimate biomass potential. The study provided county- and state-level biomass potential projections, with biomass feedstock production estimates and suitability assessment of lands acreage likely to transition to energy crops. For this analysis, we estimate biomass supply by year 2028, more specifically, lands acreage transition to switchgrass in the Midwest of the United States, across 50 counties in 3 states (Nebraska, Kansas, and Colorado). We propose a multi-criteria site suitability framework, to determine the potential acreage and production for switchgrass, at the field level. Site selection criteria span agronomic and ecosystem services such as previous land cover, crop rotation, soil water holding capacity, crop productivity, field efficiency, topography, soil organic matter, soil leaching propensity, distance to surface water bodies, and soil erosivity. Efficient agricultural field selection for dedicated energy crops field allocation is critical to evaluate biomass resource availability, and it is our position that estimation at the field level would provide a more accurate and useful estimation to support an emerging bioeconomy. Using field suitability scores and county-level assessments, we model land allocation decision for energy crop in the future, estimating the spatial distribution of dynamics of energy crop adoption with priority to fields scoring the highest. Additionally, compared with POLYSYS results from the report mentioned above, our method shows good performance overall, with about 2% and 1.2% of difference in switchgrass acreage allocation and crop production, respectively.

54 ENVIRONMENTAL SCIENCES↗

Discrete element modeling of switchgrass particles under compression and rotational shear

Switchgrass is a perennial herbaceous plant regarded as a biomass energy crop in the United States for its highadaptability and yield potential. Processing and handling of switchgrass particles are challenging due to the erratic mechanical and flow behavior originating from their intrinsic particulate properties. Here, we present a bonded-sphere discrete element model designed specifically for switchgrass particles. The model simultaneously captures three key particulate features, i.e., fibrous particle shapes, a wide range of particle sizes, and particle deformability. Realistic yet computationally efficient particle shape templates are created based on the image analysis data of switchgrass specimens. A fitting procedure is proposed to ensure both the particle width and length distributions are captured, a unique requirement for fibrous particles. Two full-scale numerical models, i.e., a uniaxial compression model and a Schulze ring shear model, are developed using information fromphysical experiments. The model is calibrated using experimental data of chopped-small switchgrass specimens, and then, is validated using data of chopped-large specimens in both compression and ring-shear tests. Numerical results show that the numerical models capture bulk densities accurately (with an error of 3%) while slightly underestimate the bulk friction angle. Furthermore, an extensive sensitivity analysis reveals that (1) switchgrass particles with rougher edges (due to different processing techniques) exhibit a higher shear strength and a lower flowability; (2) stiffer particles yield a lower bulk density (up to 21% lower) compared to more deformable particles, indicating particle deformability should be incorporated when modeling biomass flow in a preprocessing system.

09 BIOMASS FUELS↗

Multi-feedstock Supply Chain Optimization Model

This tool can be used to determine a least-cost feedstock mix from crop residue, energy crop and MSW to meet conversion specifications, while also identifying appropriate depot locations and size, given that depot can be co-located with the biorefinery or can be located in any counties in the biofinery’s supply shed.

Roni, MohammadS↗

Modeling land use and land cover change: using a hindcast to estimate economic parameters in gcamland v2.0

Abstract. Future changes in land use and cover have important implications for agriculture, energy, water use, and climate. Estimates of future land use and land cover differ significantly across economic models as a result of differences in drivers, model structure, and model parameters; however, these models often rely on heuristics to determine model parameters. In this study, we demonstrate a more systematic and empirically based approach to estimating a few key parameters for an economic model of land use and land cover change, gcamland. Specifically, we generate a large set of model parameter perturbations for the selected parameters and run gcamland simulations with these parameter sets over the historical period in the United States to quantify land use and land cover, determine how well the model reproduces observations, and identify parameter combinations that best replicate observations, assuming other model parameters are fixed. We also test alternate methods for forming expectations about uncertain crop yields and prices, including adaptive, perfect, linear, and hybrid approaches. In particular, we estimate parameters for six parameters used in the formation of expectations and three of seven logit exponents for the USA only. We find that an adaptive expectation approach minimizes the error between simulated outputs and observations, with parameters that suggest that for most crops, landowners put a significant weight on previous information. Interestingly, for corn, where ethanol policies have led to a rapid growth in demand, the resulting parameters show that a larger weight is placed on more recent information. We examine the change in model parameters as the metric of model error changes, finding that the measure of model fitness affects the choice of parameter sets. Finally, we discuss how the methodology and results used in this study could be used for other regions or economic models to improve projections of future land use and land cover change.

54 ENVIRONMENTAL SCIENCES↗

SLOPE daily and 250 m gross primary productivity (GPP) for the CONUS, 2000-2019, Carbon Monitoring System (CMS)

The SatelLite Only Photosynthesis Estimation (SLOPE) GPP product is a daily, 250 m GPP dataset covering the Contiguous United States (CONUS) from 2000 to present with 1 day latency. Gross primary productivity (GPP) quantifies the amount of carbon dioxide (CO2) fixed by plants through photosynthesis. Although as a key quantity of terrestrial ecosystems, there is a lack of high-spatial-and-temporal-resolution, real-time, and observation-based GPP products. This product has been developed to address this critical gap, leveraging a number of MODIS land and atmosphere products. There are three distinct features of the SLOPE GPP production algorithm. (1) SLOPE couples machine learning models with MODIS atmosphere and land products to accurately estimate PAR. (2) SLOPE couples highly efficient and pragmatic gap-filling and filtering algorithms with surface reflectance acquired by both Terra and Aqua MODIS satellites to derive a soil-adjusted NIRv (SANIRv) dataset. (3) SLOPE couples a temporal pattern recognition approach with a long-term Crop Data Layer (CDL) product to predict dynamic C4 crop fraction. PAR, SANIRv and C4 fraction are used to drive a parsimonious model with only two slope parameters to estimate GPP along with a quantitative uncertainty on a per-pixel and daily basis. The slope GPP product has a R2 = 0.84 and a root-mean-square error (RMSE) of 1.65 gC m-2 d-1, evaluated against from 50 AmeriFlux eddy covariance sites (332 site-years). Archived data from 2000 to 2019 are publicly available at the NASA's Oak Ridge National Laboratory Distributed Active Archive Center (ORNL DAAC). Data from 2020 are available from the authors upon request. All data are projected in the standard MODIS Land Integerized Sinusoidal tile map projection. Each processing tile is in size of 4800 pixels by 4800 pixels, representing approximately 1200 km by 1200 km land region. In addition to the GPP product, SLOPE PAR, SANIRV, and C4 fraction, along with their uncertainties, are also released.

Jiang, Chongya↗

A genome resource for green millet Setaria viridis enables discovery of agronomically valuable loci

Abstract Wild and weedy relatives of domesticated crops harbor genetic variants that can advance agricultural biotechnology. Here we provide a genome resource for the wild plant green millet ( Setaria viridis ), a model species for studies of C 4 grasses, and use the resource to probe domestication genes in the close crop relative foxtail millet ( Setaria italica ). We produced a platinum-quality genome assembly of S. viridis and de novo assemblies for 598 wild accessions and exploited these assemblies to identify loci underlying three traits: response to climate, a ‘loss of shattering’ trait that permits mechanical harvest and leaf angle, a predictor of yield in many grass crops. With CRISPR–Cas9 genome editing, we validated Less Shattering1 ( SvLes1 ) as a gene whose product controls seed shattering. In S. italica , this gene was rendered nonfunctional by a retrotransposon insertion in the domesticated loss-of-shattering allele SiLes1-TE (transposable element). This resource will enhance the utility of S. viridis for dissection of complex traits and biotechnological improvement of panicoid crops.

59 BASIC BIOLOGICAL SCIENCES↗

Nth-plant scenario for forest resources and short rotation woody crops: Biorefineries and depots in the contiguous US

Estimating the US potential of woody material is of vital importance to ensure cost-effective supply logistics and develop a sustainable bioenergy and bioproducts industry. We analyzed a mature conversion technology for woody resources for the contiguous US that takes advantage of economies of scale: the nth-plant. Here, we developed a database to quantify the total accessible woody biomass within a distributed network of preprocessing depots and biorefineries considering both quality specifications for conversion and a target cost to compete with fossil fuels. We considered two categories of woody biomass: 1) forest residues from trees, tops and limbs produced from conventional thinning and timber harvesting operations as well as non-timber tree removal; and 2) short rotation woody crops such as poplar, willow, pine, and eucalyptus. A mixed integer linear programming model was developed to analyze scenarios with woody feedstock blends at variable biomass ash contents and cost targets at the biorefinery. When considering a target cost of 85.51 dollars/dry ton (2016$) at the biorefinery, the maximum accessible biomass from forest residues in 2040 remained constant at 106 million dry tons regardless of ash targets. Including short rotation woody crops as part of the blend increased the total accessible biomass to 153 and 195 million dry tons at ash targets of 1% and 1.75%, respectively. We concluded from our analysis that woody resources could address about 55% of EPA’s (Environmental Protection Agency) target of 16 billion gallons of cellulosic biofuel.

09 BIOMASS FUELS↗

Life cycle analysis of dedicated energy crops for fuel production in the United States

Dedicated energy crops are promising feedstocks to make biofuels including jet fuels. This study applies life cycle analysis (LCA) to estimate direct well-to-wake (WTW) greenhouse gas (GHG) emissions (g CO 2 e/MJ) for jet fuel derived from five energy crops-biomass sorghum, miscanthus, switchgrass, poplar, and willow-via Fischer-Tropsch-to-Jet (FTJ) and Ethanol-to-Jet (ETJ) pathways. The WTW boundary includes direct emissions from biomass production, fuel production, and fuel combustion. The R&D GREET model is expanded to conduct the LCA, using national average biomass yields and farming inputs from the 2023 Billion-Ton Study. In addition, this study estimates emissions from market-mediated effects, including induced land-use change, induced other crop (non-feedstock) production changes, and induced livestock production changes using global economic and emissions factor models. On a per-dry U.S. ton basis, cultivation and harvest emissions are lowest for willow (51,565 g CO 2 e) and highest for biomass sorghum (104,488 g CO 2 e). Per-acre results show similarly high emissions for sorghum and lowest values for poplar and willow. Direct WTW emissions are substantially lower for FTJ (biomass sorghum: 5.5; miscanthus: 10.3; switchgrass: 11.7; poplar: 11.9; and willow: 8.7 g CO 2 e/MJ) than ETJ (33.2; 33.8; 34.8; 36.2; and 31.7 g CO 2 e/MJ, respectively). When market-mediated emissions are included, miscanthus exhibits the lowest total emissions across energy crop pathways. Although results are sensitive to modeling assumptions, they indicate that high-yielding perennial and woody crops, particularly when planted on marginal land, could significantly reduce WTW emissions for bio-jet fuels by combining low direct emissions with soil carbon gains and favorable market-mediated effects.

Billion-Ton Study↗

Relics of interspecific hybridization retained in the genome of a drought-adapted peanut cultivar

Peanut (Arachis hypogaea L.) is a globally important oil and food crop frequently grown in arid, semi-arid, or dryland environments. Improving drought tolerance is a key goal for peanut crop improvement efforts. Here, we present the genome assembly and gene model annotation for “Line8,” a peanut genotype bred from drought-tolerant cultivars. Our assembly and annotation are the most contiguous and complete peanut genome resources currently available. The high contiguity of the Line8 assembly allowed us to explore structural variation both between peanut genotypes and subgenomes. We detect several large inversions between Line8 and other peanut genome assemblies, and there is a trend for the inversions between more genetically diverged genotypes to have higher gene content. We also relate patterns of subgenome exchange to structural variation between Line8 homeologous chromosomes. Unexpectedly, we discover that Line8 harbors an introgression from A.cardenasii, a diploid peanut relative and important donor of disease resistance alleles to peanut breeding populations. The fully resolved sequences of both haplotypes in this introgression provide the first in situ characterization of A.cardenasii candidate alleles that can be leveraged for future targeted improvement efforts. The completeness of our genome will support peanut biotechnology and broader research into the evolution of hybridization and polyploidy.

60 APPLIED LIFE SCIENCES↗

A Chromosome-Scale Genome Assembly of the Flax Rust Fungus Reveals the Two Unusually Large Effector Proteins, AvrM3 and AvrN

Rust fungi comprise thousands of species, many of which cause disease on important crop plants. The flax rust fungus Melampsora lini has been a model species for the genetic dissection of plant immunity since the 1940s; however, the highly fragmented and incomplete reference genome has so far hindered progress in effector gene discovery. Here, we generated a fully phased, chromosome-scale assembly of the two nuclear genomes of M. lini strain CH5, resolving an additional 320 Mbp of the sequence. The 482-Mbp dikaryotic genome is at least 79% repetitive, with a large proportion (approximately 40%) of the genome comprising young, highly similar transposable elements. The assembly resolves the known effector gene loci, some of which carry complex duplications that were collapsed in the previous assembly. Using a genetic map followed by manual correction of gene models, we identified the AvrM3 and AvrN genes, which encode unusually large fungal effector proteins and trigger defense responses when co-expressed with the corresponding resistance genes. We located the genes linked to the tetrapolar mating system on chromosomes 4 and 9, but in contrast to the cereal rusts that have one pheromone receptor gene per haplotype, in flax rust, three pheromone receptor genes were found, with two of them closely linked on one haplotype. Taken together, we show that a high-quality assembly is crucial for resolving complex gene loci, and given the increasing number of fungal effectors of large size, the commonly applied criterion for effector candidates of being small proteins needs to be reconsidered.

Melampsora↗

Optimization of multiplexed CRISPR/Cas9 system for highly efficient genome editing in Setaria viridis

Previously, Setaria viridis has been developed as a model plant to better understand the C4 photosynthetic pathway in major crops. With the increasing availability of genomic resources for S. viridis research, highly efficient genome editing technologies are needed to create genetic variation resources for functional genomics. In this paper, we developed a protoplast assay to rapidly optimize the multiplexed CRISPR/Cas9 system in S. viridis. Targeted mutagenesis efficiency was further improved by an average of 1.4-fold with the exonuclease, Trex2. Distinctive mutation profiles were found in the Cas9_Trex2 samples with 94% of deletions larger than 10bp, and less than 1% of mutations being insertions. Further analyses indicated that 52.2% of deletions induced by Cas9_Trex2, as opposed to 3.5% by Cas9 alone, were repaired through microhomology-mediated end joining (MMEJ) rather than the canonical NHEJ DNA repair pathway. Combined with the robust agrobacterium-mediated transformation method with more than 90% efficiency, the multiplex CRISPR/Cas9_Trex2 system was demonstrated to induce targeted mutations in two tightly linked genes, svDrm1a and svDrm1b, at the frequency ranging from 73% to 100% in T0 plants. These mutations were transmitted to at least 60% of the transgene-free T1 plants with 33% of them containing bi-allelic or homozygous mutations in both genes. This highly efficient multiplex CRISPR/Cas9_Trex2 system makes it possible to create a large mutant resource for S. viridis in a rapid and high throughput manner, and has the potential to be widely applicable in achieving more predictable MMEJ-mediated mutations in many plant species.

59 BASIC BIOLOGICAL SCIENCES↗