Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control Account”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Development and Optimization of Voltammetric Methods for Real Time Analysis of Electrorefiner Salt with High Concentrations of Actinides and Fission Products

This project addresses the problem of achieving accurate material control and accountability (MC&A) around pyroprocessing electrorefiner systems. Spent nuclear fuel pyroprocessing poses a unique challenge with respect to reprocessing technology in that the fuel is never fully dissolved in the process fluid. In this case, the process fluid is molten, anhydrous LiCl-KCl salt. Therefore, there is no traditional input accountability tank. However, electrorefiners (ER) accumulate very large quantities of fissile nuclear material (including plutonium) and should be well safeguarded in a commercial facility. Idaho National Laboratory (INL) currently operates a pyroprocessing facility for treatment of spent fuel from Experimental Breeder Reactor-II with two such ER systems. INL implements MC&A via a mass tracking model in combination with periodic sampling of the salt and other materials followed by destructive analysis. This approach is projected to be insufficient to meet international safeguards timeliness requirements. A real time or near real time monitoring method is, thus, direly needed to support commercialization of pyroprocessing. A variety of approaches to achieving real time monitoring for ER salt have been proposed and studied to date—including a potentiometric actinide sensor for concentration measurements, a double bubbler for salt depth and density measurements, and laser induced breakdown spectroscopy (LIBS) for concentration measurements. While each of these methods shows some promise, each also involves substantial technical complexity that may ultimately limit their implementation. Yet another alternative is voltammetry —a very simple method in theory that has previously been tested for this application to a limited extent. The equipment for a voltammetry system consists of off-the-shelf components (three electrodes and a potentiostat), which results in substantial benefits relative to cost and robustness. Based on prior knowledge of electrochemical reduction potentials for each of the species of interest, voltammetry can be used to quantify concentrations of a variety of elemental species—including uranium, plutonium, minor actinides, and rare earths. Various methods have been tested by other researchers to date—including cyclic voltammetry, square wave voltammetry, normal pulse voltammetry, etc. In most cases, it has been observed that there is a very limited concentration range for which the output can be readily correlated with concentration in the salt. Furthermore, testing to date has been limited to simple ternary salts with only a single element being quantified. While incomplete for application to MC&A for pyroprocessing, these results lead us to believe that voltammetry can be optimized based on salt properties and fundamental electrochemical rate processes to yield a highly accurate and robust method. This project is divided into four tasks jointly executed by three university research groups. This includes experimental measurement of key physical data on the systems of interest, development of a predictive voltammetry model, experimental validation of the voltammetry model, and design/verification of an optimized measurement method. This project supports the goals of the US-ROK Joint Fuel Cycle Study in addition to the NA-24 Office of the National Nuclear Security Agency and the International Atomic Energy Agency (IAEA).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

2017 NE-4 Nuclear Technologies Research and Development (NTRD) Achievements Report

Fiscal year (FY) 2017 initiated new and reestablished presidential and departmental nuclear energy priorities for the U.S. Department of Energy (DOE), Office of Nuclear Energy (DOE-NE) that will: • Support the Administration’s priorities to achieve U.S. energy dominance and economic prosperity through U.S. technology leadership • Support DOE-NE mission priorities and goals for the existing nuclear fleet, advanced reactor pipeline and national fuel cycle infrastructure • Focus on early stage research, and effective cooperation with industry, academia, and other government agencies • Propose investments to maintain and improve capabilities and infrastructure to conduct leading-edge science, research, and technology development. DOE-NE’s mission priorities will focus on the existing nuclear fleet, advanced reactor pipeline, and fuel cycle infrastructure. Therefore, the DOE Nuclear Technology Research and Development (NE-4) mission aligned to (1) support the research and development (R&D) of innovative reactor technologies that may offer improved safety, functionality, and affordability and (2) conduct research to reduce long-term technical barriers for advanced nuclear energy systems, including space fission systems. Key activities to execute this mission include: • To achieve the NE-4 mission priorities, two major programs with eight R&D campaigns are engaged in impactful research, development, demonstration, and deployment: Fuel Cycle Technologies (FCT) Program • Fuel Cycle Options Campaign evaluates complex fuel cycle options and provides performance metrics on various systems and scenarios to improve the knowledge of interdependencies between technologies and different systems. • Advanced Fuels Campaign performs science-based R&D on accident tolerant fuels in addition to advanced light-water reactor (LWR) fuel and transmutation fuel. • Joint Fuel Cycle Studies (JFCS) is a collaboration with the Republic of Korea to assess the feasibility and nonproliferation of electrochemical recycling to manage used fuel. • Material Recovery and Waste Form Development (MRWFD) Campaign researches advanced fuel cycle material recovery and waste management capabilities to improve fuel cycle performance with less processing and waste generation. • Material Protection, Control, and Accountability Technologies (MPACT) Program develops tools and capabilities to secure the next generation nuclear materials management and safeguards for nuclear fuel cycles. Advanced Reactor Technologies (ART) Program • Fast Reactors Campaign targets benefits in either resource utilization or waste management and possesses favorable features for small reactor applications and plutonium management. • Gas-Cooled Reactors Campaign seeks to raise the technological readiness of high temperature gas-cooled reactors (HTGRs) and other reactor concepts utilizing coated particle fuel, graphite, or helium coolant by performing high risk, enabling research and development that commercial developers are unable or unwilling to undertake in the current energy market. • ART Energy Conversion (EC) Project provides solutions to convert heat from an advanced reactor to useful products that support commercial application of the reactor designs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

BPM Offset of NSLS-II Storage Ring Based on BBA Measurement

Beam based alignment (BBA) is the final calibration of the Beam position monitor (BPM) readings based on the quadrupole centers and it becomes essential process for the modern synchrotron light sources. For the convenient BBA implementation, usually BPMs are placed close to the quadrupoles and the beam is adjusted to pass the center of the quadrupoles. Therefore, measured BPM BBAs are, in fact, the BPM offsets relative to the quadrupole centers, and by observing their variations, we can estimate the relative movements of the BPMs. In NSLS-II, the BPM BBAs are measured whenever the beam-time allows and the variations are being observed. However, because changing BBAs in the BPM readings has direct and significant impact on the machine operation as well as the user experiments, they are not applied instantly. Instead, in NSLS-II, the official BBA values are managed by the snapshot archiving and retrieving system, called MASAR (MAchine Snapshot Archiving and Retrieve), so that they are well organized and can be easily set to any stored set of BBAs values. NSLS-II is implementing MASAR as a part of EPICS control system for the convenient and mistake-free machine operation. Each snapshot is a group of key-value pairs where keys are EPICS Process Variables (PVs). The snapshots are organized by configurations where each configuration has specific PV sets. And each configuration saves snapshots with titles corresponding their purposes such as normal user operations or specific beam studies. Anyone with control system account can save snapshots and they can be restored whenever needed. One of the configurations is “SR_BPM_BBAS" and the configuration includes the set of EPICS PVs for the storage ring BPM BBA values. This configuration also includes the BBAs of the in the straight sections, called ID (insertion device) BPMs playing important roles in user experiments. The ID BPM BBAs are also directly engaged in the active interlock (AI) machine protection system, which prevents the mechanical damage from the ID radiation. However, in estimating ID BPM BBAs, because there is no quadrupoles around them, interpolations from the surrounding sector BPM BBAs are used. This note focuses on the BPM offset variations based on the BBA measurement data and does not discuss about the ID BPM BBAs because they are not the direct measures of the offsets.

36 MATERIALS SCIENCE↗

NDA & NMAC at LANL Overview

NDA plays a key role in Nuclear Security under as part of Nuclear Materials Accounting and Control (NMAC)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of a Liquid-Fueled Molten Salt Reactor Safeguards Model.

This work describes the ongoing work to develop a molten salt reactor (MSR) model and associated tools for safeguards analysis. A new flowsheet was developed in collaboration with Oak Ridge National Laboratory (ORNL) for the Molten Salt Demonstration Reactor (MSDR). This design was chosen by ORNL as a generic baseline design that could be used for safeguards research. The model has simple chemical processing that is less extensive than the two-fluid flowsheet developed in the last year. A detailed TRITON reactor physics model, provided by ORNL, was implemented into the process model. The process model now includes reactor parameters such as K-eff and decay heat, which could be used as part of an advanced safeguards approach. Finally, a set of generic safeguards tools based on current safeguards approaches were developed. These tools are flexible and can be used with most MSR flowsheets. ACKNOWLEDGEMENTS This work was funded by the Materials Protection Accounting and Control Technologies (MPACT) working group as part of the Fuel Cycle Technologies Program under the U.S. Department of Energy, Office of Nuclear Energy. The authors would also like to acknowledge Ben Betz ler for his work on the reactor physics models that were incorporated into the work and the continued collaboration with ORNL staff.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Model MC&A for Pebble Bed Reactors (Technical Direction No. 5 Task 2.6 Letter Report)

In preparation for non-light water reactor (non-LWR) activities, US Nuclear Regulatory Commission (NRC) staff are advancing risk-informed and performance-based licensing approaches and addressing key policy issues. One non-LWR reactor concept is a pebble bed reactor (PBR). This reactor design uses spherical fuel elements (pebbles) that are continually added to and removed from the reactor core. The free movement of the fuel in this design presents new challenges for material control and accounting (MC&A) programs. Therefore, an assessment of MC&A program features and measures for a PBR was performed to help NRC staff develop associated MC&A regulations or regulatory guides. The current regulatory framework for non-LWR fuel cycles excludes support for licensing reviews for MC&A programs for PBRs. Licensing reviews of an MC&A program for PBRs can be facilitated by (1) a model MC&A program for a PBR based on identification and assessment of MC&A program features and recommended measures for a reference PBR and (2) a methodology for assessing MC&A performance that can help assess different MC&A program features and measures. This report supports the NRC’s non-LWR Vision and Strategy Near-Term Implementation Action Plans.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Fissionable Materials Handlers Operators-Initial Training

These courses were designed for all Initial Fissionable Material Handlers Operators and Supervisors whose job activities will require the performance of Fissile Material Operations located within the Plutonium Facility (PF-4). The course requirements are based on DOE order 426.2, Personnel Section, Qualification, and Training Requirements for Fissionable Material Handlers. These courses are required training for all initial Fissionable Material Handlers and is specific to TA-55 FMH Certification. It covers the core areas and topics in Criticality Safety, Material-at-Risk, Nuclear Material Control and Accountability, Radiological Protection, TA-55 Material Handling and Movement.

61 RADIATION PROTECTION AND DOSIMETRY↗

Workshop on Improving Holdup Monitoring in the US

The characterization and quantification of nuclear deposits, or residual nuclear material retained in process equipment, generally referred to as holdup, continues to challenge nuclear processing facilities in DOE program areas such as nuclear criticality safety, material control and accountability, environmental management. The efficiency and effectiveness of nuclear operations in these facilities depends heavily on the results from nondestructive techniques designed to measure nuclear materials in situ. The traditional methods used to measure holdup were established more than 30 years ago and assume unrealistic conditions for most measurement cases. These blind, in situ measurements present unique challenges due to the following attributes: unique, non-ideal geometries; unknown deposit thicknesses; lack of representative calibration standards; large number of holdup deposit locations; and poor accessibility for many measurement locations. These difficulties and the poor assumptions made to handle them have resulted in measurement uncertainties that are often too large for many programs to effectively utilize. In an effort to address and identify solutions to the current holdup challenges facing the US nuclear industry, Oak Ridge National Laboratory hosted the Technical Workshop on Improving Holdup Monitoring in the US. The two-day workshop held August 21–22, 2019, was attended by 35 holdup measurement practitioners, program managers, stakeholders from US Department of Energy sites, the Nuclear Regulatory Commission, and representatives from commercial industry. The primary objectives were to identify critical elements of a successful and defensible holdup measurement program; identify technical challenges, needs, and potential improvements associated with measurement of holdup; and share best practices and lessons learned from recent accumulation events. Fourteen presentations were delivered on holdup topics including necessary elements for effective program management, measurement needs, emerging technologies and other measurement solutions, and lessons learned from recent events. These presentations highlighted best practices related to accumulation monitoring, considerations and proactive steps to facilitate holdup in new facility designs, imaging solutions to improve holdup assumptions, and new software developed in support of holdup measurements. Breakout sessions were also employed to determine additional needs and identify potential solutions to common holdup challenges. The primary discussions focused on causes and prevention of material accumulations, needs for uranium and plutonium measurements, and reduction of measurement uncertainty, all of which were explicitly identified as critical needs during the 2018 Workshop on Technical and Programmatic Needs for a Sustainable NDA Program for the US DOE.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Physical Security Model Development of an Electrochemical Facility

Nuclear facilities in the U.S. and around the world face increasing challenges in meeting evolving physical security requirements while keeping costs reasonable. The addition of security features after a facility has been designed and without attention to optimization (the approach of the past) can easily lead to cost overruns. Instead, security should be considered at the beginning of the design process in order to provide robust, yet efficient physical security designs. The purpose of this work is to demonstrate how modeling and simulation can be used to optimize the design of physical protection systems. A suite of tools, including Scribe3D and Blender, were used to model a generic electrochemical reprocessing facility. Physical protection elements such as sensors, portal monitors, barriers, and guard forces were added to the model based on best practices for physical security. Two theft scenarios (an outsider attack and insider diversion) as well as a sabotage scenario were examined in order to optimize the security design. Security metrics are presented. This work fits into a larger Virtual Facility Distributed Test Bed 2020 Milestone in the Material Protection, Accounting, and Control Technologies (MPACT) program through the Department of Energy (DOE). The purpose of the milestone is to demonstrate how a series of experimental and modeling capabilities across the DOE complex provide the capabilities to demonstrate complete Safeguards and Security by Design (SSBD) for nuclear facilities.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Qualification and Re-Qualification of NDA Instruments

Non-Destructive Assay (NDA) instruments are a large component of nuclear material (NM) measurement at LANL. Nuclear Material Control and Accountability Group (SAFE-NMCA) personnel in the Safeguards Division are responsible for oversight of the instruments used for material accountability measurements. It is the responsibility of SAFE-NMCA to ensure that all instruments are operating as expected and can produce quality measurements to provide assurance that requirements of the DOE approved NMCA Plan are being met.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Infrastructure and Testing Needs for Molten Salt Reactor Safeguards

Molten salt reactors (MSRs) are an attractive advanced reactor technology because of their increased fuel utilization and efficiency, the ease of fueling, and the potential to use alternative fuel cycles, including thorium and breeder/burner scenarios. Since an MSR has never been domestically operated for commercial electricity production, minimal infrastructure exists to support performance and materials testing, reactor licensing (including research, test, and operating reactors), and technology development in general. These factors could present challenges for the commercialization of the proposed design technology. Several research and development efforts and investments have begun to identify and supplement the infrastructure to accommodate the molten salt concept, including the United States Department of Energy Office of Nuclear Energy Molten Salt Reactor Program. This report reviews safeguards technology and domestic infrastructure to support the evaluation of nuclear safeguards (primarily material control and accounting) measures and approaches for salt-fueled MSRs. Recommendations for potential priority infrastructure investments, including safeguards measurement test beds and future research, are presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

New Capability at ORNL: High Precision Uranium Titration

Destructive analytical measurements establish a nuclear facility’s nuclear material inventory and inventory differences for Nuclear Material Accountancy and Control. A nuclear laboratory’s ability to perform accurate high-precision analytical measurements is key for tracking large inventories within a facility’s material balance areas and during production to track material movement through dynamic processes. For uranium, these measurements are made by using several established high-precision measurement protocols. These include isotope dilution mass spectrometry, gravimetry, and potentiometric titrations. Whatever measurement technique a nuclear lab chooses to use, reference materials (RMs) with certified attributes and accompanying uncertainties are used to calibrate measurement systems, and are the cornerstone for accurate results. In addition to calibration, RMs provide for metrological traceability, are used for method development and validation, and thus provide critical evaluations of the appropriateness and performance of analytical processes used. Evaluations may include validation that a method is fit-for-purpose, quantification of systematic and random biases, and the evaluation of long-term and short-term performance metrics. High-precision measurement techniques require that measured attributes be certified to a high degree of precision in the RMs used—ultimately, to a higher degree than that of the measurement technique itself. The US authority on the production of special nuclear material Certified Reference Materials is the NBL Program Office (NBLPO), formally known as New Brunswick Laboratory (NBL). The NBLPO is responsible for the sales and distribution of existing NBL certified reference materials (CRMs) and for the production of the next generation of nuclear RMs. To accomplish its mission, NBLPO is establishing key base capabilities within the DOE laboratory complex that formerly existed at the NBL laboratory. The Nuclear Analytical Chemistry (NAC) section within the Chemical Sciences Division (CSD) at Oak Ridge National Laboratory (ORNL) is currently working with NBLPO to set up laboratory and measurement capabilities to provide measurements and capabilities for production and/or recertification of existing and future CRMs for uranium assay. The NBL-developed high-precision titration (HPT) method is a critically-evaluated, extremely precise and accurate primary method utilized for the determination of uranium content in a variety of uranium materials. The HPT method, combined with detailed balance weighing protocols, provides for an analytical methodology that is unsurpassed in precision and one in which all sources of error have been evaluated, a requirement of CRM certification. HPT capability within the United States was lost with the closure of the labs at NBL. The NAC has been collaborating with NBLPO to stand up and demonstrate the capability to perform uranium assay via HPT at ORNL. HPT can produce results with an expanded uncertainty of approximately 0.01% for pure uranium compounds, with typical precisions of <0.006%. The major tasks required to stand up the method at ORNL were the refurbishment of a dedicated lab and equipment setup, procedure development, analyst training, establishing method-specific quality assurance, and qualification of an analyst to perform the method. This report summarizes these tasks, outlines the documents drafted, and gives the outcome of the qualification titrations.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Initial Assessment of TeF 6 Adsorption

Research and development that supports the management of off-gases from nuclear fuel reprocessing has historically been focused on the off-gas streams that arise from aqueous reprocessing technology. However, as Gen-IV reactor development pathways move toward deployment, alternative spent nuclear fuel (SNF) processing and disposition pathways have been considered more actively. This work is focused upon aspects of fluoride volatility (FV) processing. The versatility of this method for deployment against multiple types of spent fuel encourages the continued advancement of both the primary separations processes and the secondary processes, including waste treatment, material control and accountability, and engineering designs. Recent work noted that TeF 6 , the most highly volatile fluorinated compound produced during FV processing, did not have a clear abatement technology recommended in the literature. Thus, this work performed scoping tests on activated alumina and copper shot to assess whether they could be used to remove TeF 6 from gas streams that bear F 2 . Previous work on this topic was not well described in the literature and was not performed with excess F 2 in the stream as would be typical of spent fuel processing via FV. To support an understanding of the concentration of TeF 6 contacting the adsorbent beds, a series of preliminary testing identified the TeF 6 production rate and the equilibrium concentration of TeF 6 in the gas stream contacting the adsorbent. Excess F 2 was determined to not affect the ability of activated alumina to remove TeF 6 from the gas stream quickly and completely. A determination of whether excess F 2 affected the distribution depth of Te in the sorbent bed is still pending analysis of the used sorbent. Literature suggests that when activated alumina is near saturation, TeF 6 could migrate from the sorbent bed. Future testing should investigate this possibility. Copper metal did not adsorb TeF 6 in the presence of F 2 across the sorbent temperature range of 50 to 335°C. F 2 was fully removed by the copper bed. Although preliminary thermodynamics would indicate adsorption to be energetically favorable, other factors that impact adsorption (e.g., slow kinetics, excess fluorine on the copper surface, an unfavorable transition state) are likely preventing the adsorption of TeF 6 at an easily measurable rate. The work also investigated TeF 6 production from multiple forms of Te in the temperature range of 100 to 250°C. No previous study had assessed the initial reaction rates for this process. A carefully designed study allowed determination of the activation energy for the production of TeF 6 from Te metal. The substantial amount of data collected during this study merits analysis beyond what is described here. A more in-depth kinetic analysis will be pursued. Additional analytical results will provide the ability to benchmark adsorption coefficients for TeF 6 , understand the distribution of TeF 6 within the alumina bed, and better understand the effect of F 2 partial pressure on Te fluorination. The data from this report, as supplemented by these additional analyses, will be submitted to a peer-reviewed journal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Reactor Safeguards Program Roadmap

The Advanced Reactor Safeguards (ARS) program was established in 2020 as part of appropriations for the Advanced Reactor Demonstration Program (ARDP) through the Office of Nuclear Energy in the Department of Energy. The goal of this program is to help address near term challenges that advanced nuclear reactor vendors face in meeting domestic Material Control and Accountancy (MC&A) and Physical Protection System (PPS) requirements for U.S. construction. Existing regulations for safeguards and security, as outlined in the Code of Federal Regulations, were written for large light water reactors, and some of the requirements are not suited to smaller, safer advanced reactor designs. The ARS program seeks to remove roadblocks in the deployment of new and advanced reactors by solving regulatory challenges, reducing safeguards and security costs, and utilizing the latest technologies and approaches for robust plant monitoring and protection. Safeguards and Security by Design (SSBD), or the consideration of safeguards and security requirements early in the design process, is an overarching principle that guides this program. This roadmap discusses the goals of the ARS program, current research, and program plan for the next five years.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Uranium Holdup Monitoring with Compton Imaging as Function of Depth and Mass

Material Control and Accountability (MC&A) programs track masses of materials flowing through production processes, where some material remains in process equipment as holdup. Quantification of these masses using gamma emissions typically involves usage of a well characterized radiation detector and assumptions of geometric configuration to constrain detection efficiencies, where the Generalized Geometry Holdup (GGH) method is often used. Uncertainties on the order of ±50% are observed, where the difficulties arise based on the asymmetric and gradient distributions of material that do not fall within the bounds of GGH. Gamma imagers provide a possible means to improve this geometric knowledge. This work describes the process used in creating a series of mass standards to aid the development of imaging algorithms for quantification.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Discrete-event Simulation Process Model for the Pyrochemical Processing of Plutonium at Los Alamos National Laboratory

The pyrochemical metal production operations that occur in the Plutonium Facility at Los Alamos National Laboratory perform plutonium purification with the aim to provide plutonium metal for a variety of defense- and non-defense missions within the National Nuclear Security Administration. The demands and constraints associated with the pyrochemical processing of plutonium are complex, making decision analyses challenging for program managers who require plutonium production for their mission applications. The construction of a discrete-event simulation process model is proposed to measure and report the process capacity, material throughput, equipment requirements, and dose accumulation for operators of the pyrochemical metal production operations. The process model, constructed in the ExtendSim™ software, will represent the cause-and-effect relationships between the pyrochemical processing environment and the process constraints, including criticality limitations, material control and accountability measures, chemical analysis requirements, and equipment availability. An accurate representation of the pyrochemical metal production process capacity through simulation modeling will be helpful to program managers in their efforts to forecast plutonium availability for mission applications. Furthermore, the proposed process model will be vital for future analyses that will measure the interactions between the pyrochemical metal production operations and the aqueous reprocessing operations and their ability to minimize transuranic waste disposal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Reactor Safeguards: 2022 Program Roadmap

The Advanced Reactor Safeguards (ARS) program was established in 2020 as part of appropriations for the Advanced Reactor Demonstration Program (ARDP) through the Office of Nuclear Energy in the Department of Energy. The goal of this program is to help address near term challenges that advanced nuclear reactor vendors face in meeting domestic Material Control and Accountancy (MC&A) and Physical Protection System (PPS) requirements for U.S. construction. The technical work in the program is meant to (1) support nuclear reactor vendors with advanced MC&A and PPS designs for next generation reactors, (2) provide technical bases for the regulator, and (3) promote the integration of Safeguards and Security by Design early in the design process. Existing domestic regulations for safeguards and security, as outlined in the Code of Federal Regulations, were written for large light water reactors, and rule-making efforts are underway to develop regulations more suited to different reactor designs. The ARS program seeks to remove roadblocks in the deployment of new and advanced reactors by solving regulatory challenges, reducing safeguards and security costs, and utilizing the latest technologies and approaches for robust plant monitoring and protection. This roadmap discusses the goals of the ARS program, current research, and program plan for the next five years.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Domestic MC&A Recommendations for Liquid-Fueled MSRs

Investments by the US Department of Energy (DOE) are providing opportunities for vendors and developers of advanced reactor technologies to move toward experimental reactor systems, leading to commercial scale facilities. One facet of complementary research under the Advanced Reactor Safeguards program in the DOE Office of Nuclear Energy (NE-5) is motivated to assist vendors in licensing under the existing US (domestic) regulatory body’s federal regulations. This report provides concepts, approaches, and recommendations for liquid-fueled molten salt reactor (MSR) vendors to meet the material control and accountability (MC&A) and licensing requirements set forth by the US Nuclear Regulatory Commission (NRC) to possess and handle special nuclear material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗